Drop the "accel" property from MachineState, and instead desugar
"-machine accel=" to a list of "-accel" options.
This has a semantic change due to removing merge_lists from -accel.
For example:
- "-accel kvm -accel tcg" all but ignored "-accel kvm". This is a bugfix.
- "-accel kvm -accel thread=single" ignored "thread=single", since it
applied the option to KVM. Now it fails due to not specifying the
accelerator on "-accel thread=single".
- "-accel tcg -accel thread=single" chose single-threaded TCG, while now
it will fail due to not specifying the accelerator on "-accel
thread=single".
Also, "-machine accel" and "-accel" become incompatible.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Commit 29cb418749 ("spapr: Set VSMT to smp_threads by default")
has introduced a new default value for VSMT that is not supported
by old kernels (before 4.13 kernel) and this breaks "make check"
on these kernels.
To fix that, explicitly set in the involved tests the value that was
used as the default value before the change.
Cc: Greg Kurz <groug@kaod.org>
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Message-Id: <20191120142539.236279-1-lvivier@redhat.com>
Acked-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Tested-by: Greg Kurz <groug@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The new pseries-4.0 machine type defaults to enabling Spectre/Meltdown
mitigations. Unfortunately those mitigations aren't implemented for TCG
because we're not yet sure if they're necessary or how to implement them.
We don't fail fatally, but we do warn in this case, because it is quite
plausible that Spectre/Meltdown can be exploited through TCG (at least for
the guest to get access to the qemu address space).
This create noise in our testcases though. So, modify the affected tests
to explicitly disable the mitigations to suppress these warnings.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
global_qtest is not really required here, since boot_sector_test()
is already independent from that global variable.
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
As a general rule, we prefer avoiding implicit global state
because it makes code harder to safely copy and paste without
thinking about the global state. Adjust the helper code to
use explicit state instead, and update all callers.
Fix some trailing whitespace while touching the file.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Previously virtio-net was only tested for ppc64 in "slow" mode. That
doesn't make much sense since virtio-net is used much more often in
practice than the spapr-vlan device which was tested always. So, move
virtio-net to always be tested on ppc64.
We had no tests at all for the q35 machine, which doesn't seem wise
given its increasing prominence. Add a couple of tests for it,
including testing the newer e1000e adapter.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This adds IPv6 net boot testing (in addition to IPv4) when in slow test
mode on ppc64 or s390. IPv6 PXE doesn't seem to work on x86, I'm guessing
our BIOS image doesn't support it.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Currently pxe-tests open codes the list of tests for each architecture.
This changes it to use tables of test parameters, somewhat similar to
boot-serial-test.
This adds the machine type into the table as well, giving us the ability
to perform tests on multiple machine types for architectures where there's
more than one machine type that matters.
NOTE: This changes the names of the tests in the output, to include the
machine type and IPv4 vs. IPv6. I'm not sure if this has the
potential to break existing tooling.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
All of the x86 and some of the other test cases here use a common test
function, test_pxe_ipv4(), but one ppc and one s390 test use different
functions.
In the s390 case, this is completely pointless, the right parameter to
test_pxe_ipv4() will already do exactly the right thing. For the
spapr-vlan case there's a slight difference - it will use IPv6 instead of
IPv4.
But testing just one case with IPv6 (and NOT IPv4) is rather haphazard.
Change everything to use the common test function, until we have a better
way of testing IPv6 across the board.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The pxe-test is a very good test to excercise NICs, thus we should use
it to test all NICs that can be used by the BIOS for booting via network.
However, to avoid that the default testing time increases too much, the
additional NICs are only tested in the "make check SPEED=slow" mode.
The virtio-net NIC on ppc64 is now also only tested in slow mode, since
the test on ppc64 is really quite slow and we've got test coverage for
virtio-net in big endian mode now on s390x, too.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Now that we've got a firmware that can do TFTP booting on s390x (i.e.
the pc-bios/s390-netboot.img), we can enable the PXE tester for this
architecture, too.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Message-Id: <1502431076-22849-3-git-send-email-thuth@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Speed up tests on host systems with kvm support.
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Thomas Huth <thuth@redhat.com>
Cc: Laurent Vivier <lvivier@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
The pxe-test is run for three different targets now (x86_64, i386
and ppc64), and the bios-tables-test is run for two targets (x86_64
and i386). But each of the tests is using an invariant name for the
disk image with the boot sector code - so if the tests are running in
parallel, there is a race condition that they destroy the disk image
of a parallel test program. Let's use mkstemp() to create unique
temporary files here instead - and since mkstemp() is returning an
integer file descriptor instead of a FILE pointer, we also switch
the fwrite() and fclose() to write() and close() instead.
Reported-by: Sascha Silbe <x-qemu@se-silbe.de>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
SLOF is unfortunately quite slow when running with TCG, so
the pxe test is also performing rather slow here. By using
"-nodefaults" we can disable some devices (vscsi) that we
are not interested in here, so that SLOF does not have to
scan them during boot and thus starts up a little bit faster.
The ppc64 pxe-test now only takes 27 seconds on my laptop
instead of 33 seconds.
The "-nodefaults" flag seems to work fine for the x86 tests,
too, so it is added here unconditionally here (though there
is no speed-up on x86 by using this flag).
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The firmware of the pseries machine, SLOF, is able to load files via
IPv6 networking, too. So to test both, network bootloading on ppc64
and IPv6 (via Slirp) , let's add some PXE tests for this environment,
too. Since we can not use the normal x86 boot sector for network boot
loading, we use a simple Forth script on ppc64 instead.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Remove glib.h includes, as it is provided by osdep.h.
This commit was created with scripts/clean-includes.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Eric Blake <eblake@redhat.com>
Tested-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Clean up includes so that osdep.h is included first and headers
which it implies are not included manually.
This commit was created with scripts/clean-includes.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
This just catches a couple of stragglers since I posted
the last clean-includes patchset last week.
The test is based on bios-tables-test.c. It creates a file with
the boot sector image and loads it into a guest using PXE and TFTP
functionality.
Cc: Jason Wang <jasowang@redhat.com>
Signed-off-by: Victor Kaplansky <victork@redhat.com>
Suggested-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
