This reverts commit 000c4dfff4.
The main reason for reverting this commit before the 2.2 release is that
it adds a QAPI interface that we don't want to keep: The 'nocow' flag
doesn't generally make sense for block nodes, but only for the raw-posix
driver. It should therefore be part of ImageInfoSpecific rather than
ImageInfo.
The commit contains more problems, but unlike the API stability issue
they wouldn't justify reverting it.
Conflicts:
block/qapi.c
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
fsync() may fail, and that case should be handled.
Reported-by: László Érsek <lersek@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The loop which filled the file with zeroes may have been left early due
to an error. In that case, the fsync() should be skipped.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
write() may write less bytes than requested; in this case, the number of
bytes written is returned. This is the byte count we should be
subtracting from the number of bytes still to be written, and not the
byte count we requested to write.
Reported-by: László Érsek <lersek@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
On systems where SEEK_HOLE in a trailing hole seeks to EOF (Solaris,
but not Linux), try_seek_hole() reports trailing data instead.
Additionally, unlikely lseek() failures are treated badly:
* When SEEK_HOLE fails, try_seek_hole() reports trailing data. For
-ENXIO, there's in fact a trailing hole. Can happen only when
something truncated the file since we opened it.
* When SEEK_HOLE succeeds, SEEK_DATA fails, and SEEK_END succeeds,
then try_seek_hole() reports a trailing hole. This is okay only
when SEEK_DATA failed with -ENXIO (which means the non-trailing hole
found by SEEK_HOLE has since become trailing somehow). For other
failures (unlikely), it's wrong.
* When SEEK_HOLE succeeds, SEEK_DATA fails, SEEK_END fails (unlikely),
then try_seek_hole() reports bogus data [-1,start), which its caller
raw_co_get_block_status() turns into zero sectors of data. Could
theoretically lead to infinite loops in code that attempts to scan
data vs. hole forward.
Rewrite from scratch, with very careful comments.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Commit 5500316 (May 2012) implemented raw_co_is_allocated() as
follows:
1. If defined(CONFIG_FIEMAP), use the FS_IOC_FIEMAP ioctl
2. Else if defined(SEEK_HOLE) && defined(SEEK_DATA), use lseek()
3. Else pretend there are no holes
Later on, raw_co_is_allocated() was generalized to
raw_co_get_block_status().
Commit 4f11aa8 (May 2014) changed it to try the three methods in order
until success, because "there may be implementations which support
[SEEK_HOLE/SEEK_DATA] but not [FIEMAP] (e.g., NFSv4.2) as well as vice
versa."
Unfortunately, we used FIEMAP incorrectly: we lacked FIEMAP_FLAG_SYNC.
Commit 38c4d0a (Sep 2014) added it. Because that's a significant
speed hit, the next commit 7c159037 put SEEK_HOLE/SEEK_DATA first.
As you see, the obvious use of FIEMAP is wrong, and the correct use is
slow. I guess this puts it somewhere between -7 "The obvious use is
wrong" and -10 "It's impossible to get right" on Rusty Russel's Hard
to Misuse scale[*].
"Fortunately", the FIEMAP code is used only when
* SEEK_HOLE/SEEK_DATA aren't defined, but CONFIG_FIEMAP is
Uncommon. SEEK_HOLE had no XFS implementation between 2011 (when it
was introduced for ext4 and btrfs) and 2012.
* SEEK_HOLE/SEEK_DATA and CONFIG_FIEMAP are defined, but lseek() fails
Unlikely.
Thus, the FIEMAP code executes rarely. Makes it a nice hidey-hole for
bugs. Worse, bugs hiding there can theoretically bite even on a host
that has SEEK_HOLE/SEEK_DATA.
I don't want to worry about this crap, not even theoretically. Get
rid of it.
[*] http://ozlabs.org/~rusty/index.cgi/tech/2008-04-01.html
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Missed in commit 705be72.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
When extent types don't match, we return -ENOTSUP. In this case, be
polite to the caller and don't modify bdi.
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 1415938161-16217-1-git-send-email-famz@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The block layer read and write functions do not like requests which are
bigger than INT_MAX bytes. Since the VDI bmap is read and written in a
single operation, its size is therefore limited accordingly. This
reduces the maximum VDI image size supported by QEMU to half of what it
currently is (down to approximately 512 TB).
The VDI test 084 has to be adapted accordingly. Actually, one could
clearly see that it was broken from the "Could not open
'TEST_DIR/t.IMGFMT': Invalid argument" line for an image which was
supposed to work just fine.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Peter Lieven <pl@kamp.de>
Version: GnuPG v1
iQEcBAABAgAGBQJUV2wdAAoJEJykq7OBq3PIjcAH/29rl938ETw1wjXxYe3uH+R6
K2yFEiPh9/cOJSH0mJ+gD8DZIN+iyR4eoQGP2s5ALFPcX3bkYxRLlUeYK0BCp883
esc7gO6XPhLvTVqP0xgACRCdUwH2I0VTToDlHjXXZogyI/DuDX3gzWJufE3x1DGs
WNTMOp5n/uYkWH3rI3DkInmbSddEz3pgX65a8BuYtw0V/RSeSRnHKDYHMygvJBRL
EVfWRNeOIrZ730CyJry0t8ITjsZxiBDKXR5glNSwaIfQUfGkTSWi9YNSurNYkUDr
aMS2rgvOVlrOUDKTHUj9oS3jgoGWcDtlk9E1MeSoyIptbRoMhdFVl1AUJZsrMJU=
=Mfbu
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/stefanha/tags/block-pull-request' into staging
# gpg: Signature made Mon 03 Nov 2014 11:50:53 GMT using RSA key ID 81AB73C8
# gpg: Good signature from "Stefan Hajnoczi <stefanha@redhat.com>"
# gpg: aka "Stefan Hajnoczi <stefanha@gmail.com>"
* remotes/stefanha/tags/block-pull-request: (53 commits)
block: declare blockjobs and dataplane friends!
block: let commit blockjob run in BDS AioContext
block: let mirror blockjob run in BDS AioContext
block: let stream blockjob run in BDS AioContext
block: let backup blockjob run in BDS AioContext
block: add bdrv_drain()
blockjob: add block_job_defer_to_main_loop()
blockdev: add note that block_job_cb() must be thread-safe
blockdev: acquire AioContext in blockdev_mark_auto_del()
blockdev: acquire AioContext in do_qmp_query_block_jobs_one()
block: acquire AioContext in generic blockjob QMP commands
iotests: Expand test 061
block/qcow2: Simplify shared L2 handling in amend
block/qcow2: Make get_refcount() global
block/qcow2: Implement status CB for amend
qemu-img: Fix insignificant memleak
qemu-img: Add progress output for amend
block: Add status callback to bdrv_amend_options()
block: qemu-iotest 107 supports NFS
iotests: Add test for qcow2's bdrv_make_empty
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.12 (GNU/Linux)
iQEcBAABAgAGBQJUVhuDAAoJEL7lnXSkw9fbOKMIAIE3XZMhar4Vmokb/K0DFbnh
gy2z7iCe7vumLKiRSJX1LGmkFO3dwykw82JZQ1SVo0RdgguJ5dx1Abx1qDM1rojL
jJT0pJ9zWPl4fTv38wCEfaysQHPdgwoH4826ga+MXnVS9XHRHHxuQ4vI01AK3oyQ
4t6/wto9H8kF3n6ny7tz5WNZClsq7qbiIqw5nNCILQfSh/VBPwxQNBiWf/nYVMuY
Ubk5noztZwH+hbiAQL5lAPz/HolcRwg1tzbR0dfmt8/aqO28rJhasG58JgtziI2y
JSg4BwldqUQEgiHonArLfQDixjLtEEyL+fQSzZm02ixwcBpc/ADSyGDy2R1zpH8=
=j1ga
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/mjt/tags/pull-trivial-patches-2014-11-02' into staging
trivial patches for 2014-11-02
# gpg: Signature made Sun 02 Nov 2014 11:54:43 GMT using RSA key ID A4C3D7DB
# gpg: Good signature from "Michael Tokarev <mjt@tls.msk.ru>"
# gpg: aka "Michael Tokarev <mjt@corpit.ru>"
# gpg: aka "Michael Tokarev <mjt@debian.org>"
* remotes/mjt/tags/pull-trivial-patches-2014-11-02: (23 commits)
vdi: wrapped uuid_unparse() in #ifdef
tap: fix possible fd leak in net_init_tap
tap: do not close(fd) in net_init_tap_one
target-i386: Remove unused model_features_t struct
tap_int.h: remove repeating NETWORK_SCRIPT defines
os-posix: reorder parent notification for -daemonize
pidfile: stop making pidfile error a special case
os-posix: replace goto again with a proper loop
os-posix: use global daemon_pipe instead of cryptic fds[1]
dump: Fix dump-guest-memory termination and use-after-close
virtio-9p-proxy: improve error messages in connect_namedsocket()
virtio-9p-proxy: fix error return in proxy_init()
virtio-9p-proxy: Fix sockfd leak
target-tricore: check return value before using it
net/slirp: specify logbase for smbd
Revert "os-posix: report error message when lock file failed"
util: Improve os_mem_prealloc error message
sparse: fix build
target-arm: A64: remove redundant store
target-xtensa: mark XtensaConfig structs as unused
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The commit block job must run in the BlockDriverState AioContext so that
it works with dataplane.
Acquire the AioContext in blockdev.c so starting the block job is safe.
One detail here is that the bdrv_drain_all() must be moved inside the
aio_context_acquire() region so requests cannot sneak in between the
drain and acquire.
The completion code in block/commit.c must perform backing chain
manipulation and bdrv_reopen() from the main loop. Use
block_job_defer_to_main_loop() to achieve that.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 1413889440-32577-11-git-send-email-stefanha@redhat.com
The mirror block job must run in the BlockDriverState AioContext so that
it works with dataplane.
Acquire the AioContext in blockdev.c so starting the block job is safe.
Note that to_replace is treated separately from other BlockDriverStates
in that it does not need to be in the same AioContext. Explicitly
acquire/release to_replace's AioContext when accessing it.
The completion code in block/mirror.c must perform BDS graph
manipulation and bdrv_reopen() from the main loop. Use
block_job_defer_to_main_loop() to achieve that.
The bdrv_drain_all() call is not allowed outside the main loop since it
could lead to lock ordering problems. Use bdrv_drain(bs) instead
because we have acquired the AioContext so nothing else can sneak in
I/O.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 1413889440-32577-10-git-send-email-stefanha@redhat.com
The stream block job must run in the BlockDriverState AioContext so that
it works with dataplane.
The basics of acquiring the AioContext are easy in blockdev.c.
The tricky part is the completion code which drops part of the backing
file chain. This must be done in the main loop where bdrv_unref() and
bdrv_close() are safe to call. Use block_job_defer_to_main_loop() to
achieve that.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 1413889440-32577-9-git-send-email-stefanha@redhat.com
The backup block job must run in the BlockDriverState AioContext so that
it works with dataplane.
The basics of acquiring the AioContext are easy in blockdev.c.
The completion code in block/backup.c must call bdrv_unref() from the
main loop. Use block_job_defer_to_main_loop() to achieve that.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 1413889440-32577-8-git-send-email-stefanha@redhat.com
Currently, we have a bitmap for keeping track of which clusters have
been created during the zero cluster expansion process. This was
necessary because we need to properly increase the refcount for shared
L2 tables.
However, now we can simply take the L2 refcount and use it for the
cluster allocated for expansion. This will be the correct refcount and
therefore we don't have to remember that cluster having been allocated
any more.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Benoît Canet <benoit.canet@nodalink.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Benoit Canet <benoit@irqsave.net>
Message-id: 1414404776-4919-7-git-send-email-mreitz@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reading the refcount of a cluster is an operation which can be useful in
all of the qcow2 code, so make that function globally available.
While touching this function, amend the comment describing the "addend"
parameter: It is (no longer, if it ever was) necessary to have it set to
-1 or 1; any value is fine.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Benoît Canet <benoit.canet@nodalink.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Benoit Canet <benoit@irqsave.net>
Message-id: 1414404776-4919-6-git-send-email-mreitz@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The only really time-consuming operation potentially performed by
qcow2_amend_options() is zero cluster expansion when downgrading qcow2
images from compat=1.1 to compat=0.10, so report status of that
operation and that operation only through the status CB.
For this, approximate the progress as the number of L1 entries visited
during the operation.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Benoît Canet <benoit.canet@nodalink.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Benoit Canet <benoit@irqsave.net>
Message-id: 1414404776-4919-5-git-send-email-mreitz@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Depending on the changed options and the image format,
bdrv_amend_options() may take a significant amount of time. In these
cases, a way to be informed about the operation's status is desirable.
Since the operation is rather complex and may fundamentally change the
image, implementing it as AIO or a coroutine does not seem feasible. On
the other hand, implementing it as a block job would be significantly
more difficult than a simple callback and would not add benefits other
than progress report to the amending operation, because it should not
actually be run as a block job at all.
A callback may not be very pretty, but it's very easy to implement and
perfectly fits its purpose here.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Benoît Canet <benoit.canet@nodalink.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-id: 1414404776-4919-2-git-send-email-mreitz@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
qemu-img should use QMP commands whenever possible in order to ensure
feature completeness of both online and offline image operations. As
qemu-img itself has no access to QMP (since this would basically require
just everything being linked into qemu-img), imitate QMP's
implementation of block-commit by using commit_active_start() and then
waiting for the block job to finish.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 1414159063-25977-9-git-send-email-mreitz@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Instead of taking the total length of the block device as the block
job's length, use the number of dirty sectors. The progress is now the
number of sectors mirrored to the target block device. Note that this
may result in the job's length increasing during operation, which is
however in fact desirable.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-id: 1414159063-25977-8-git-send-email-mreitz@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
bdrv_make_empty() is currently only called if the current image
represents an external snapshot that has been committed to its base
image; it is therefore unlikely to have internal snapshots. In this
case, bdrv_make_empty() can be greatly sped up by emptying the L1 and
refcount table (while having the dirty flag set, which only works for
compat=1.1) and creating a trivial refcount structure.
If there are snapshots or for compat=0.10, fall back to the simple
implementation (discard all clusters).
[Applied s/clusters/cluster/ typo fix suggested by Eric Blake
--Stefan]
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 1414159063-25977-4-git-send-email-mreitz@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Implement this function by making all clusters in the image file fall
through to the backing file (by using the recently extended discard).
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-id: 1414159063-25977-3-git-send-email-mreitz@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Normally, discarded sectors should read back as zero. However, there are
cases in which a sector (or rather cluster) should be discarded as if
they were never written in the first place, that is, reading them should
fall through to the backing file again.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-id: 1414159063-25977-2-git-send-email-mreitz@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Instead of generating the full return value thrice in try_fiemap(),
try_seek_hole() and as a fall-back in raw_co_get_block_status() itself,
generate the value only in raw_co_get_block_status().
While at it, also remove the pnum parameter from try_fiemap() and
try_seek_hole().
Suggested-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-id: 1414148280-17949-3-git-send-email-mreitz@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
As its comment states, raw_co_get_block_status() should unconditionally
return 0 and set *pnum to 0 for after EOF.
An assertion after lseek(..., SEEK_HOLE) tried to catch this case by
asserting that errno != -ENXIO (which would indicate a position after
the EOF); but it should be errno != ENXIO instead. Regardless of that,
there should be no such assertion at all. If bdrv_getlength() returned
an outdated value and the image has been resized outside of qemu,
lseek() will return with errno == ENXIO. Just return that value as an
error then.
Setting *pnum to 0 and returning 0 should not be done here, as in that
case we should update the device length as well. So, from qemu's
perspective, the file has not been resized; it's just that there was an
error querying sectors beyond a certain point (the actual file size).
Additionally, nb_sectors should be clamped against the image end. This
was probably not an issue if FIEMAP or SEEK_HOLE/SEEK_DATA worked, but
the fallback did not take this case into account.
Reported-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-id: 1414148280-17949-2-git-send-email-mreitz@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
qemu_opt_get_number returns a uint64_t, and curl_easy_setopt expects a
long (not an int). There is no warning about the latter type error
because curl_easy_setopt uses a varargs argument.
Store the timeout (which is a positive number of seconds) as a
uint64_t. Check that the number given by the user is reasonable.
Zero is permissible (meaning no timeout is enforced by cURL).
Cast it to long before calling curl_easy_setopt to fix the type error.
Example error message after this change has been applied:
$ ./qemu-img create -f qcow2 /tmp/test.qcow2 \
-b 'json: { "file.driver":"https",
"file.url":"https://foo/bar",
"file.timeout":-1 }'
qemu-img: /tmp/test.qcow2: Could not open 'json: { "file.driver":"https", "file.url":"https://foo/bar", "file.timeout":-1 }': timeout parameter is too large or negative: Invalid argument
Signed-off-by: Richard W.M. Jones <rjones@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Gonglei <arei.gonglei@huawei.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
If there are still pending i/o while deleting snapshot,
because deleting snapshot is done in non-coroutine context, and
the pending i/o read/write (bdrv_co_do_rw) is done in coroutine context,
so it's possible to cause concurrency problem between above two operations.
Add bdrv_drain_all() to bdrv_snapshot_delete() to avoid this problem.
Signed-off-by: Zhang Haoyu <zhanghy@sangfor.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 201410211637596311287@sangfor.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This fixes Ceph issue 2467: ttp://tracker.ceph.com/issues/2467
[Dropped return r in void function as suggested by Josh Durgin
<josh.durgin@inktank.com>.
--Stefan]
Signed-off-by: Adam Crume <adamcrume@gmail.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 1412880272-3154-1-git-send-email-adamcrume@gmail.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
found by valgrind.
Command: ./qemu-img convert -f parallels -O qcow2 1.hds 1.img
Invalid read of size 4
at 0x17D0EF: parallels_co_read (parallels.c:357)
by 0x11FEE4: bdrv_aio_rw_vector (block.c:4640)
by 0x11FFBF: bdrv_aio_readv_em (block.c:4652)
by 0x11F55F: bdrv_co_readv_em (block.c:4862)
by 0x123428: bdrv_aligned_preadv (block.c:3056)
by 0x1239FA: bdrv_co_do_preadv (block.c:3162)
by 0x125424: bdrv_rw_co_entry (block.c:2706)
by 0x155DD9: coroutine_trampoline (coroutine-ucontext.c:118)
by 0x6975B6F: ??? (in /lib/x86_64-linux-gnu/libc-2.19.so)
The problem is that s->catalog_bitmap is allocated/filled as
gmalloc(s->catalog_size) thus index validity check must be
inclusive, i.e. index >= s->catalog_size is invalid.
Signed-off-by: Denis V. Lunev <den@openvz.org>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 1412759610-2257-4-git-send-email-den@openvz.org
CC: Jeff Cody <jcody@redhat.com>
CC: Kevin Wolf <kwolf@redhat.com>
CC: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Cancel oversized requests early. They would generate
an iSCSI protocol error anyway; after having transferred
possibly a lot of data over the wire.
Suggested-By: Max Reitz <mreitz@redhat.com>
Signed-off-by: Peter Lieven <pl@kamp.de>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
As Max pointed out there is a hidden cast from int64_t to int for all
limits. So use the newly introduced sector_limits_lun2qemu for all
limits received from the target.
Signed-off-by: Peter Lieven <pl@kamp.de>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Copy the max_xfer_len from the BlockLimits VPD or use the
maximum value fitting in the CDB.
The helper function sector_limits_lun2qemu is introduced to convert
and cap the limits from the VPD to the maximum power of two fitting
in an integer; integer is the range for nb_sectors throughout
the block layer.
Signed-off-by: Peter Lieven <pl@kamp.de>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Wrapped uuid_unparse() in #ifdef to avoid "-Wunused-function"
on clang 3.4 or later.
Signed-off-by: SeokYeon Hwang <syeon.hwang@samsung.com>
Reviewed-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Before, when a write protected iSCSI target is attached as scsi-disk
with BDRV_O_RDWR, we report it as writable, while in fact all writes
will fail.
One way to improve this is to report write protect flag as true to
guest, but a even better way is to refuse using a write protected LUN to
guest.
Target write protect flag is checked with a mode sense query.
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Introduce a new flag to mark devices that require requests to be aligned and
replace the usage of BDRV_O_NOCACHE and O_DIRECT with this flag when
appropriate.
If a character device is used as a backend on a FreeBSD host set this flag
unconditionally.
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Cc: Kevin Wolf <kwolf@redhat.com>
Cc: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
While writing an L1 table sector, qcow2_write_l1_entry() copies the
respective range from s->l1_table to the local "buf" array. The size of
s->l1_table does not have to be a multiple of L1_ENTRIES_PER_SECTOR;
thus, limit the index which is used for copying all entries to the L1
size.
Cc: qemu-stable@nongnu.org
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Peter Lieven <pl@kamp.de>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
With BDRVQcowState.refcount_block_bits, we don't need REFCOUNT_SHIFT
anymore.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Because the old refcount structure will be leaked after having rebuilt
it, we need to recalculate the refcounts and run a leak-fixing operation
afterwards (if leaks should be fixed at all).
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The previous commit introduced the "rebuild" variable to qcow2's
implementation of the image consistency check. Now make use of this by
adding a function which creates a completely new refcount structure
based solely on the in-memory information gathered before.
The old refcount structure will be leaked, however. This leak will be
dealt with in a follow-up commit.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
If a referenced cluster has a refcount of 0, increasing its refcount may
result in clusters being allocated for the refcount structures. This may
overwrite the referenced cluster, therefore we cannot simply increase
the refcount then.
In such cases, we can either try to replicate all the refcount
operations solely for the check operation, basing the allocations on the
in-memory refcount table; or we can simply rebuild the whole refcount
structure based on the in-memory refcount table. Since the latter will
be much easier, do that.
To prepare for this, introduce a "rebuild" boolean which should be set
to true whenever a fix is rather dangerous or too complicated using the
current refcount structures. Another example for this is refcount blocks
being referenced more than once.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
If the qcow2 check function detects a refcount block located beyond the
image end, grow the image appropriately. This cannot break anything and
is the logical fix for such a case.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
We will later call calculate_refcounts multiple times, so reuse the
refcount table if possible.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Benoît Canet <benoit.canet@nodalink.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Now that the refcount table can be passed around by reference, do that
for inc_refcounts() (and subsequently check_refcounts_l1() and
check_refcounts_l2()) and use it for resizing it when a cluster after
the image end is encountered.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
As of a future patch, inc_refcounts() will have to throw errors which
are generally signaled by returning -errno. Therefore, let it return an
integer which is either 0 for success or -errno and handle the -errno
case in all callers.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Instead of printing out an error message, incrementing check_errors and
returning a fixed -errno, just do cleanups and return -ret, with ret set
by the code which threw the exception (jumped to the fail label).
Also, increment check_errors on error in check_refcounts_l2().
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Use int64_t for the entry count of the in-memory refcount table
throughout the check functions.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Pull check_refblocks() before calculate_refcounts() so we can drop its
static declaration.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Benoît Canet <benoit.canet@nodalink.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
When implementing variable refcounts, we want to be able to easily find
all the places in qemu which are tied to a certain refcount order.
Replace sizeof(uint16_t) in the check code by sizeof(**refcount_table)
so we can later find it more easily.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Put the code for calculating the reference counts and comparing them
during qemu-img check into own functions.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Benoît Canet <benoit.canet@nodalink.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Kevin Wolf
Max Reitz
Markus Armbruster
Fam Zheng
Peter Maydell
Stefan Hajnoczi
Richard W.M. Jones
Zhang Haoyu
Adam Crume
Denis V. Lunev
Peter Lieven
SeokYeon Hwang
Roger Pau Monne