Commit Graph

174 Commits

Author SHA1 Message Date
Thomas Huth b813bed1ab usb: Deprecate HMP commands usb_add and usb_del
The commands 'device_add' and 'device_del' should be used
nowadays instead.

Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-id: 1495175803-12830-1-git-send-email-thuth@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2017-05-29 14:03:35 +02:00
Thomas Huth 559964a1ad hmp / net: Mark host_net_add/remove as deprecated
The netdev_add and netdev_del commands should be used nowadays instead.

Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
2017-05-23 10:10:38 +08:00
Paolo Bonzini e9628441df hmp: gpa2hva and gpa2hpa hostaddr command
These commands are useful when testing machine-check passthrough.
gpa2hva is useful to inject a MADV_HWPOISON madvise from gdb, while
gpa2hpa is useful to inject an error with the mce-inject kernel
module.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <1490021158-4469-1-git-send-email-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20170420133058.12911-1-pbonzini@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2017-04-26 14:42:31 +01:00
zhanghailiang d89e666e06 COLO: Add 'x-colo-lost-heartbeat' command to trigger failover
We leave users to choose whatever heartbeat solution they want,
if the heartbeat is lost, or other errors they detect, they can use
experimental command 'x_colo_lost_heartbeat' to tell COLO to do failover,
COLO will do operations accordingly.

For example, if the command is sent to the Primary side,
the Primary side will exit COLO mode, does cleanup work,
and then, PVM will take over the service work. If sent to the Secondary side,
the Secondary side will run failover work, then takes over PVM's service work.

Cc: Luiz Capitulino <lcapitulino@redhat.com>
Cc: Eric Blake <eblake@redhat.com>
Cc: Markus Armbruster <armbru@redhat.com>
Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Amit Shah <amit@amitshah.net>
2016-10-30 15:17:39 +05:30
Marc-André Lureau 2b9e35760a monitor: remove mhandler.cmd_new
This is no longer necessary now that we aren't using middle mode
anymore.

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20160912091913.15831-12-marcandre.lureau@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-09-19 17:32:22 +02:00
Pavel Butsykin 13b9414b57 drive-backup: added support for data compression
The idea is simple - backup is "written-once" data. It is written block
by block and it is large enough. It would be nice to save storage
space and compress it.

The patch adds a flag to the qmp/hmp drive-backup command which enables
block compression. Compression should be implemented in the format driver
to enable this feature.

There are some limitations of the format driver to allow compressed writes.
We can write data only once. Though for backup this is perfectly fine.
These limitations are maintained by the driver and the error will be
reported if we are doing something wrong.

Signed-off-by: Pavel Butsykin <pbutsykin@virtuozzo.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Denis V. Lunev <den@openvz.org>
CC: Jeff Cody <jcody@redhat.com>
CC: Markus Armbruster <armbru@redhat.com>
CC: Eric Blake <eblake@redhat.com>
CC: John Snow <jsnow@redhat.com>
CC: Stefan Hajnoczi <stefanha@redhat.com>
CC: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2016-09-05 19:06:48 +02:00
Lluís Vilanova 77e2b17272 trace: Add QAPI/QMP interfaces to query and control per-vCPU tracing state
Signed-off-by: Lluís Vilanova <vilanova@ac.upc.edu>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2016-07-18 18:23:12 +01:00
Daniel P. Berrange 69ef1f36b0 migration: define 'tls-creds' and 'tls-hostname' migration parameters
Define two new migration parameters to be used with TLS encryption.
The 'tls-creds' parameter provides the ID of an instance of the
'tls-creds' object type, or rather a subclass such as 'tls-creds-x509'.
Providing these credentials will enable use of TLS on the migration
data stream.

If using x509 certificates, together with a migration URI that does
not include a hostname, the 'tls-hostname' parameter provides the
hostname to use when verifying the server's x509 certificate. This
allows TLS to be used in combination with fd: and exec: protocols
where a TCP connection is established by a 3rd party outside of
QEMU.

NB, this requires changing the migrate_set_parameter method in the
HMP to accept a 's' (string) value instead of 'i' (integer). This
is backwards compatible, because the parsing of strings allows the
quotes to be optional, thus any integer is also a valid string.

Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-Id: <1461751518-12128-26-git-send-email-berrange@redhat.com>
Signed-off-by: Amit Shah <amit.shah@redhat.com>
2016-05-26 11:32:10 +05:30
Kevin Wolf abb21ac3e6 hmp: 'drive_add -n' for creating a node without BB
This patch adds an option to the drive_add HMP command to create only a
BlockDriverState without a BlockBackend on top.

The motivation for this is that libvirt needs to specify options to a
migration target (specifically, detect-zeroes). drive-mirror doesn't
allow specifying options, and the proper way to do this is to create the
target BDS separately with blockdev-add (where you can specify options)
and then use blockdev-mirror to that BDS.

However, libvirt can't use blockdev-add as long as it is still
experimental, and we're expecting that it will still take some time, so
we need to resort to drive_add.

The problem with drive_add is that so far it always created a BB, and
BDSes with a BB can't be used as a mirroring target as long as we don't
support multiple BBs per BDS - and while we're working towards that
goal, it's another thing that will still take some time.

So to achieve the goal, the simplest solution to provide the
functionality now without adding one-off options to the mirror QMP
commands is to extend drive_add to create nodes without BBs.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2016-03-14 16:46:43 +01:00
Dr. David Alan Gilbert 32c3db5b26 postcopy: Remove the x-
Postcopy seems to have survived a cycle with only a few fixes,
and Jiri has the current libvirt wired up and working
( https://www.redhat.com/archives/libvir-list/2016-March/msg00080.html )
so remove the experimental tag.

Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <1457690016-9070-3-git-send-email-dgilbert@redhat.com>
Signed-off-by: Amit Shah <amit.shah@redhat.com>
2016-03-11 17:53:59 +05:30
Peter Xu 228de9cf1d dump-guest-memory: add "detach" flag for QMP/HMP interfaces.
This patch only adds the interfaces, but does not implement them.
"detach" parameter is made optional, to make sure that all the old
dump-guest-memory requests will still be able to work.

Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Message-Id: <1455772616-8668-3-git-send-email-peterx@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-02-22 18:40:28 +01:00
Dr. David Alan Gilbert a54d340b9d migrate-start-postcopy: Improve text
Improve the text in both the qapi-schema and hmp help to point out
you need to set the postcopy-ram capability prior to issuing
migrate-start-postcopy.

Also fix the text of the migrate_start_postcopy error that
deals with capabilities.

Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Acked-by: Jason J. Herne <jjherne@linux.vnet.ibm.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
2015-11-12 17:54:39 +01:00
Max Reitz baead0abef hmp: Add read-only-mode option to change command
Expose the new read-only-mode option of 'blockdev-change-medium' for the
'change' HMP command.

Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2015-11-11 16:25:47 +01:00
Dr. David Alan Gilbert 4886a1bcb7 migrate_start_postcopy: Command to trigger transition to postcopy
Once postcopy is enabled (with migrate_set_capability), the migration
will still start on precopy mode.  To cause a transition into postcopy
the:

  migrate_start_postcopy

command must be issued.  Postcopy will start sometime after this
(when it's next checked in the migration loop).

Issuing the command before migration has started will error,
and issuing after it has finished is ignored.

Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
2015-11-10 15:00:26 +01:00
Daniel P. Berrange 6287d827d4 monitor: allow device_del to accept QOM paths
Currently device_del requires that the client provide the
device short ID. device_add allows devices to be created
without giving an ID, at which point there is no way to
delete them with device_del. The QOM object path, however,
provides an alternative way to identify the devices.

Allowing device_del to accept an object path ensures all
devices are deletable regardless of whether they have an
ID.

 (qemu) device_add usb-mouse
 (qemu) qom-list /machine/peripheral-anon
 device[0] (child<usb-mouse>)
 type (string)
 (qemu) device_del /machine/peripheral-anon/device[0]

Devices are required to be marked as hotpluggable
otherwise an error is raised

 (qemu) device_del /machine/unattached/device[4]
 Device 'PIIX3' does not support hotplugging

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-Id: <1441974836-17476-1-git-send-email-berrange@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
[Commit message touched up, accidental white-space change dropped]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
2015-09-22 11:31:56 +02:00
Pavel Butsykin 2cd8af2d44 monitor: added generation of documentation for hmp-commands-info.hx
It will be easier if you need to add info-commands to edit
only hmp-commands-info.hx, before this had to edit monitor.c and
hmp-commands.hx.

From the build point of view all documentation is saved into
qemu-monitor-info.texi which from now on is used for all user
documentation building.

Signed-off-by: Pavel Butsykin <pbutsykin@virtuozzo.com>
Signed-off-by: Denis V. Lunev <den@openvz.org>
CC: Paolo Bonzini <pbonzini@redhat.com>
CC: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <1441899541-1856-5-git-send-email-den@openvz.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-09-16 17:33:33 +02:00
Pavel Butsykin 70703344de hmp-commands.hx: fix end of table info
The table info(information about the system state) closes earlier
and some of its elements are outside(trace-events, rocker, etc). This
can be confusing and lead to additional bugs.

Signed-off-by: Pavel Butsykin <pbutsykin@virtuozzo.com>
Signed-off-by: Denis V. Lunev <den@openvz.org>
CC: Paolo Bonzini <pbonzini@redhat.com>
CC: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <1441899541-1856-4-git-send-email-den@openvz.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-09-16 17:33:33 +02:00
Ting Wang 62313160cb hmp: add info iothreads command
Make "info iothreads" available on the HMP monitor.

For example, the results are as follows when executing qemu
command with "-object iothread,id=iothread-1 -object
iothread,id=iothread-2".
(qemu) info iothreads
iothread-1: thread_id=123
iothread-2: thread_id=456

Signed-off-by: Ting Wang <kathy.wangting@huawei.com>
Message-Id: <1435306033-58372-1-git-send-email-kathy.wangting@huawei.com>
Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
Reviewed-by: Amos Jianjun Kong <kongjianjun@gmail.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
2015-09-04 13:26:26 +02:00
Peter Maydell b041066421 -----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
 
 iQEcBAABAgAGBQJV6F1cAAoJEJykq7OBq3PIvvgH/0UMyYBRdzm9XkN5fV9kPZmQ
 RK2NVm5pBAy8qVH8FOneYvmY2X3npLGhB/+JfQMjGgXuHkD/GeIonMbhJGuukFKh
 b7oPU7hb5J4N7Wp+aH8gUL+F3WwGQWcAhXPJgK8HbBQqWKxsAtHZmzaDTmKCpNid
 Ujd7O6f6ygtGIVzz1PsOeU9S38S3XdY1y26RXbJjdHg1ZMpF49h+XQ0mVmQSLp6c
 rlZRjXJjvDVKL5alf5UFHquZujof8n4nIpsSBtzne/ZpujGCpsZV/TaqKiU8vj38
 PiBtBozKr2IocCPkS9RjBorJLADQsUjsmqdLpPynC+BUKkgY5gRSnlpfYarMXao=
 =Uc38
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/stefanha/tags/tracing-pull-request' into staging

# gpg: Signature made Thu 03 Sep 2015 15:46:52 BST using RSA key ID 81AB73C8
# gpg: Good signature from "Stefan Hajnoczi <stefanha@redhat.com>"
# gpg:                 aka "Stefan Hajnoczi <stefanha@gmail.com>"

* remotes/stefanha/tags/tracing-pull-request:
  trace-events: Add hmp completion

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-09-03 16:17:28 +01:00
Dr. David Alan Gilbert 987bd27000 trace-events: Add hmp completion
Add completion for the trace event names in the hmp trace-event
command.

Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-id: 1439548063-18410-1-git-send-email-dgilbert@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-09-03 15:46:10 +01:00
Jason J. Herne a08f0081c9 s390x: Info skeys sub-command
Provide an  info skeys hmp sub-command to allow the end user to dump a storage
key for a given address. This is useful for guest operating system developers.

Reviewed-by: Thomas Huth <thuth@linux.vnet.ibm.com>
Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Jason J. Herne <jjherne@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2015-09-03 12:17:54 +02:00
Jason J. Herne a4538a5cc5 s390x: Dump-skeys hmp support
Add dump-skeys command to the human monitor.

Reviewed-by: Thomas Huth <thuth@linux.vnet.ibm.com>
Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Jason J. Herne <jjherne@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2015-09-03 12:17:54 +02:00
Scott Feldman fafa4d508b qmp/hmp: add rocker device support
Add QMP/HMP support for rocker devices.  This is mostly for debugging purposes
to see inside the device's tables and port configurations.  Some examples:

(qemu) info rocker sw1
name: sw1
id: 0x0000013512005452
ports: 4

(qemu) info rocker-ports sw1
            ena/    speed/ auto
      port  link    duplex neg?
     sw1.1  up     10G  FD  No
     sw1.2  up     10G  FD  No
     sw1.3  !ena   10G  FD  No
     sw1.4  !ena   10G  FD  No

(qemu) info rocker-of-dpa-flows sw1
prio tbl hits key(mask) --> actions
2    60       pport 1 vlan 1 LLDP src 00:02:00:00:02:00 dst 01:80:c2:00:00:0e
2    60       pport 1 vlan 1 ARP src 00:02:00:00:02:00 dst 00:02:00:00:03:00
2    60       pport 2 vlan 2 IPv6 src 00:02:00:00:03:00 dst 33:33:ff:00:00:02 proto 58
3    50       vlan 2 dst 33:33:ff:00:00:02 --> write group 0x32000001 goto tbl 60
2    60       pport 2 vlan 2 IPv6 src 00:02:00:00:03:00 dst 33:33:ff:00:03:00 proto 58
3    50  1    vlan 2 dst 33:33:ff:00:03:00 --> write group 0x32000001 goto tbl 60
2    60       pport 2 vlan 2 ARP src 00:02:00:00:03:00 dst 00:02:00:00:02:00
3    50  2    vlan 2 dst 00:02:00:00:02:00 --> write group 0x02000001 goto tbl 60
2    60  1    pport 2 vlan 2 IP src 00:02:00:00:03:00 dst 00:02:00:00:02:00 proto 1
3    50  2    vlan 1 dst 00:02:00:00:03:00 --> write group 0x01000002 goto tbl 60
2    60  1    pport 1 vlan 1 IP src 00:02:00:00:02:00 dst 00:02:00:00:03:00 proto 1
2    60       pport 1 vlan 1 IPv6 src 00:02:00:00:02:00 dst 33:33:ff:00:00:01 proto 58
3    50       vlan 1 dst 33:33:ff:00:00:01 --> write group 0x31000000 goto tbl 60
2    60       pport 1 vlan 1 IPv6 src 00:02:00:00:02:00 dst 33:33:ff:00:02:00 proto 58
3    50  1    vlan 1 dst 33:33:ff:00:02:00 --> write group 0x31000000 goto tbl 60
1    60  173  pport 2 vlan 2 LLDP src <any> dst 01:80:c2:00:00:0e --> write group 0x02000000
1    60  6    pport 2 vlan 2 IPv6 src <any> dst <any> --> write group 0x02000000
1    60  174  pport 1 vlan 1 LLDP src <any> dst 01:80:c2:00:00:0e --> write group 0x01000000
1    60  174  pport 2 vlan 2 IP src <any> dst <any> --> write group 0x02000000
1    60  6    pport 1 vlan 1 IPv6 src <any> dst <any> --> write group 0x01000000
1    60  181  pport 2 vlan 2 ARP src <any> dst <any> --> write group 0x02000000
1    10  715  pport 2 --> apply new vlan 2 goto tbl 20
1    60  177  pport 1 vlan 1 ARP src <any> dst <any> --> write group 0x01000000
1    60  174  pport 1 vlan 1 IP src <any> dst <any> --> write group 0x01000000
1    10  717  pport 1 --> apply new vlan 1 goto tbl 20
1    0   1432 pport 0(0xffff) --> goto tbl 10

(qemu) info rocker-of-dpa-groups sw1
id (decode) --> buckets
0x32000001 (type L2 multicast vlan 2 index 1) --> groups [0x02000001,0x02000000]
0x02000001 (type L2 interface vlan 2 pport 1) --> pop vlan out pport 1
0x01000002 (type L2 interface vlan 1 pport 2) --> pop vlan out pport 2
0x02000000 (type L2 interface vlan 2 pport 0) --> pop vlan out pport 0
0x01000000 (type L2 interface vlan 1 pport 0) --> pop vlan out pport 0
0x31000000 (type L2 multicast vlan 1 index 0) --> groups [0x01000002,0x01000000]

[Added "query-" prefixes to rocker.json commands as suggested by Eric
Blake <eblake@redhat.com>.
--Stefan]

Signed-off-by: Scott Feldman <sfeldma@gmail.com>
Signed-off-by: Jiri Pirko <jiri@resnulli.us>
Message-id: 1433985681-56138-5-git-send-email-sfeldma@gmail.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-06-12 13:42:17 +01:00
Markus Armbruster 04e00c92ef monitor: Use trad. command interface for HMP pcie_aer_inject_error
All QMP commands use the "new" handler interface (mhandler.cmd_new).
Most HMP commands still use the traditional interface (mhandler.cmd),
but a few use the "new" one.  Complicates handle_user_command() for no
gain, so I'm converting these to the traditional interface.

pcie_aer_inject_error's implementation is split into the
hmp_pcie_aer_inject_error() and pcie_aer_inject_error_print().  The
former is a peculiar crossbreed between HMP and QMP handler.  On
success, it works like a QMP handler: store QDict through ret_data
parameter, return 0.  Printing the QDict is left to
pcie_aer_inject_error_print().  On failure, it works more like an HMP
handler: print error to monitor, return negative number.

To convert to the traditional interface, turn
pcie_aer_inject_error_print() into a command handler wrapping around
hmp_pcie_aer_inject_error().  By convention, this command handler
should be called hmp_pcie_aer_inject_error(), so rename the existing
hmp_pcie_aer_inject_error() to do_pcie_aer_inject_error().

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
2015-06-02 09:59:13 +02:00
Markus Armbruster 318660f84a monitor: Use traditional command interface for HMP device_add
All QMP commands use the "new" handler interface (mhandler.cmd_new).
Most HMP commands still use the traditional interface (mhandler.cmd),
but a few use the "new" one.  Complicates handle_user_command() for no
gain, so I'm converting these to the traditional interface.

For device_add, that's easy: just wrap the obvious hmp_device_add()
around do_device_add().

monitor_user_noop() is now unused, drop it.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
2015-06-02 09:59:13 +02:00
Markus Armbruster 072ebe6b03 monitor: Use traditional command interface for HMP drive_del
All QMP commands use the "new" handler interface (mhandler.cmd_new).
Most HMP commands still use the traditional interface (mhandler.cmd),
but a few use the "new" one.  Complicates handle_user_command() for no
gain, so I'm converting these to the traditional interface.

For drive_del, that's easy: hmp_drive_del() sheds its unused last
parameter, and its return value, which the caller ignored anyway.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
2015-06-02 09:59:13 +02:00
Markus Armbruster b8a185bc9a monitor: Convert client_migrate_info to QAPI
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
2015-06-02 09:59:13 +02:00
Markus Armbruster 13cadefbda monitor: Improve and document client_migrate_info protocol error
Protocol must be spice, vnc isn't implemented.  Fix up documentation.

Attempts to use vnc or any other unknown protocol yield the misleading
error message "Invalid parameter 'protocol'".  Improve it to
"Parameter 'protocol' expects spice".

Cc: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by. Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
2015-06-02 09:59:13 +02:00
Liang Li 50e9a629c6 migration: Add hmp interface to set and query parameters
Add the hmp interface to tune and query the parameters used in
live migration.

Signed-off-by: Liang Li <liang.z.li@intel.com>
Signed-off-by: Yang Zhang <yang.z.zhang@intel.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
2015-05-07 18:31:54 +02:00
Markus Armbruster 3b5704b2f8 monitor: Make client_migrate_info synchronous
Live migration with spice works like this today:

  (1) client_migrate_info monitor cmd
  (2) spice server notifies client, client connects to target host.
  (3) qemu waits until spice client connect is finished.
  (4) send over vmstate (i.e. main part of live migration).
  (5) spice handover to target host.

(3) is implemented by making client_migrate_info a async monitor
command.  This is the only async monitor command we have.

The original reason to implement this dance was that qemu did not accept
new tcp connections while the incoming migration was running, so (2) and
(4) could not be done in parallel.  That issue was fixed long ago though.
Qemu version 1.3.0 (released Dec 2012) and newer happily accept tcp
connects while the incoming migration runs.

Time to drop step (3).  This patch does exactly that, by making the
monitor command synchronous and removing the code needed to handle the
async monitor command in ui/spice-core.c

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2015-04-27 12:46:57 +02:00
Markus Armbruster b76d799ea5 hmp: Fix texinfo documentation
Several issues:

* Commands i and o lack @item.  Their one-liner documentation gets
  squashed into the preceding command print.  Add the obvious @item.

* Commands i, o and cpu-add lack @findex.  The function index doesn't
  have them.  Add the obvious @findex.

* Commit 727f005 put block_set_io_throttle was added in the middle of
  block_passwd.  Move it.

* Correct spelling of commands chardev-add and chardev-remove in @item
  and @findex.

* Some commands have a blank line between @item/@findex and the text,
  most don't.  Normalize to no blank line.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2015-03-19 11:35:52 +03:00
Markus Armbruster 46db7b862a hmp: Fix definition of command quit
The command handler is a union of two function types.  If
cmd->user_print is set, handle_user_command() calls
cmd->mhandler.cmd_new(), else cmd->mhandler.cmd().

Command definitions must therefore either set both user_print() and
mhandler.cmd_new(), or only mhandler.cmd().

quit's sets user_print and mhandler.cmd().  handle_user_command()
calls hmp_quit() through mhandler.cmd_new() rather than
mhandler.cmd(), i.e. through a function pointer with a different type.
Broken in commit 7a7f325, v1.0.

Works in practice because hmp_quit() doesn't use its arguments, and
handle_user_command() ignores its function value.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2015-03-19 11:11:55 +03:00
Andreas Färber a01ff75fcd qom: Implement info qom-tree HMP command
To complement qdev's bus-oriented info qtree, info qom-tree
prints a hierarchical view of the QOM composition tree.

By default, the machine composition tree is shown. This can be overriden
by supplying a path argument, such as "info qom-tree /".

Tested-by: Alistair Francis <alistair.francis@xilinx.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
2015-03-17 14:31:21 +01:00
Andreas Färber c0e6ee9e6f qom: Implement qom-set HMP command
Re-implemented based on qmp_qom_set() to facilitate argument parsing.

Warn about ambiguous path arguments.

Reviewed-by: Gonglei <arei.gonglei@huawei.com>
Tested-by: Alistair Francis <alistair.francis@xilinx.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
2015-03-17 14:31:15 +01:00
Andreas Färber 89d7fa9eb4 qom: Implement qom-list HMP command
Implement it as a wrapper for QMP qom-list, but mimic the behavior of
scripts/qmp/qom-list in making the path argument optional and listing
the root if absent, to hint users what kind of path to pass.

Reviewed-by: Gonglei <arei.gonglei@huawei.com>
Tested-by: Alistair Francis <alistair.francis@xilinx.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
2015-03-17 14:31:10 +01:00
Dr. David Alan Gilbert bf1ae1f4dc Add migrate_incoming
Add migrate_incoming/migrate-incoming to start an incoming
migration.

Once a qemu has been started with
    -incoming defer

the migration can be started by issuing:
    migrate_incoming uri

Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
2015-03-16 14:31:07 +01:00
Markus Armbruster f51074cdc6 pci-hotplug-old: Has been dead for five major releases, bury
Commit 79ca616 (v1.6.0) accidentally disabled legacy x86-only HMP
commands pci_add, pci_del: it defined CONFIG_PCI_HOTPLUG only as make
variable, not as preprocessor macro, killing the code conditional on
defined(CONFIG_PCI_HOTPLUG_OLD).

In all this time, nobody reported the loss.  I only noticed it when I
tried to test some error reporting change that forced me to touch this
old crap again.

Fun: git-log hw/pci/pci-hotplug-old.c shows our faith in the backward
compatibility god has been strong enough to sacrifice at its altar
about a dozen times, but not strong enough to even once verify the
legacy feature's still there, let alone works.

Remove the commands along with the code backing them.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2015-03-01 12:37:54 +01:00
Markus Armbruster 3e5a50d64c hmp: Name HMP command handler functions hmp_COMMAND()
Some are called do_COMMAND() (old ones, usually), some hmp_COMMAND(),
and sometimes COMMAND pointlessly differs in spelling.

Normalize to hmp_COMMAND(), where COMMAND is exactly the command name
with '-' replaced by '_'.

Exceptions:

* do_device_add() and client_migrate_info() *not* renamed to
  hmp_device_add(), hmp_client_migrate_info(), because they're also
  QMP handlers.  They still need to be converted to QAPI.

* do_memory_dump(), do_physical_memory_dump(), do_ioport_read(),
  do_ioport_write() renamed do hmp_* instead of hmp_x(), hmp_xp(),
  hmp_i(), hmp_o(), because those names are too cryptic for my taste.

* do_info_help() renamed to hmp_info_help() instead of hmp_info(),
  because it only covers help.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
2015-02-18 11:58:30 +01:00
Markus Armbruster 7797a73947 hmp: Remove "info pcmcia"
This command lists PCMCIA sockets and cards.  Only a few ARM boards
have sockets (akita, borzoi, connex, mainstone, spitz, terrier, tosa,
verdex, z2), the only card is the DSCM-1xxxx Hitachi Microdrive (qdev
"microdrive"), and it is only inserted during machine init, if ever.
So this command doesn't really tell anybody anything new so far.

Moreover, pcmcia_socket_unregister() has a use-after-free bug, flagged
by Coverity.  Has never been used, because there has never been code
to eject a PCMCIA card.

Not worth fixing & converting to QMP.  Remove it.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Acked-by: Luiz Capitulino <lcapitulino@redhat.com>
Acked-by: Andreas Färber <afaerber@suse.de>
Message-id: 1411144812-22958-1-git-send-email-armbru@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-10-24 12:19:11 +01:00
Zhu Guihua a631892f9d Add HMP command "info memory-devices"
Provides HMP equivalent of QMP query-memory-devices command.

Signed-off-by: Zhu Guihua <zhugh.fnst@cn.fujitsu.com>
Reviewed-By: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2014-09-26 13:37:06 -04:00
Alexey Kardashevskiy 9cb805fd26 cpus: Define callback for QEMU "nmi" command
This introduces an NMI (Non Maskable Interrupt) interface with
a single nmi_monitor_handler() method. A machine or a device can
implement it. This searches for an QOM object with this interface
and if it is implemented, calls it. The callback implements an action
required to cause debug crash dump on in-kernel debugger invocation.
The callback returns Error**.

This adds a nmi_monitor_handle() helper which walks through
all objects to find the interface. The interface method is called
for all found instances.

This adds support for it in qmp_inject_nmi(). Since no architecture
supports it at the moment, there is no change in behaviour.

This changes inject-nmi command description for HMP and QMP.

Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-08-25 13:25:16 +02:00
Nikolay Nikolaev 03ce574442 Add the vhost-user netdev backend to the command line
The supplied chardev id will be inspected for supported options. Only
a socket backend, with a set path (i.e. a Unix socket) and optionally
the server parameter set, will be allowed. Other options (nowait, telnet)
will make the chardev unusable and the netdev will not be initialised.

Additional checks for validity:
  - requires `-numa node,memdev=..`
  - requires `-device virtio-net-*`

The `vhostforce` option is used to force vhost-net when we deal with
non-MSIX guests.

Signed-off-by: Antonios Motakis <a.motakis@virtualopensystems.com>
Signed-off-by: Nikolay Nikolaev <n.nikolaev@virtualopensystems.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Luiz Capitulino <lcapitulino@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
2014-06-19 18:44:18 +03:00
Hani Benhabiles b21631f3b5 monitor: Add delvm and loadvm argument completion
Signed-off-by: Hani Benhabiles <hani@linux.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2014-06-11 10:10:29 -04:00
Hani Benhabiles ddd6b45ce2 monitor: Add host_net_remove arguments completion
Relies on readline unique completion strings patch to make the added vlan/hub
completion values unique, instead of using something like a hash table.

Signed-off-by: Hani Benhabiles <hani@linux.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2014-06-11 10:10:29 -04:00
Hani Benhabiles e3bb532cc7 monitor: Add host_net_add device argument completion
Also fix the parameters documentation.

Signed-off-by: Hani Benhabiles <hani@linux.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2014-06-11 10:10:29 -04:00
Hani Benhabiles c68a0409b3 monitor: Add migrate_set_capability completion
Signed-off-by: Hani Benhabiles <hani@linux.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2014-06-11 10:10:29 -04:00
Hani Benhabiles d0ece345cb monitor: Add watchdog_action argument completion
Signed-off-by: Hani Benhabiles <hani@linux.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2014-06-11 10:10:28 -04:00
Hani Benhabiles 8e5977797d monitor: Add ringbuf_write and ringbuf_read argument completion
Export chr_is_ringbuf() function. Also remove left-over function prototypes
while at it.

Signed-off-by: Hani Benhabiles <hani@linux.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2014-06-11 10:10:28 -04:00
Hani Benhabiles 11b389f21e monitor: Add netdev_del id argument completion.
Signed-off-by: Hani Benhabiles <hani@linux.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2014-05-15 15:16:02 -04:00
Hani Benhabiles b162b49adc monitor: Add netdev_add type argument completion.
Also update the command's documentation.

Signed-off-by: Hani Benhabiles <hani@linux.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2014-05-15 15:16:02 -04:00