Commit Graph

80 Commits

Author SHA1 Message Date
Eduardo Habkost e90f2a8c3e qdev: Replace cannot_instantiate_with_device_add_yet with !user_creatable
cannot_instantiate_with_device_add_yet was introduced by commit
efec3dd631 to replace no_user. It was
supposed to be a temporary measure.

When it was introduced, we had 54
cannot_instantiate_with_device_add_yet=true lines in the code.
Today (3 years later) this number has not shrunk: we now have
57 cannot_instantiate_with_device_add_yet=true lines. I think it
is safe to say it is not a temporary measure, and we won't see
the flag go away soon.

Instead of a long field name that misleads people to believe it
is temporary, replace it a shorter and less misleading field:
user_creatable.

Except for code comments, changes were generated using the
following Coccinelle patch:

  @@
  expression DC;
  @@
  (
  -DC->cannot_instantiate_with_device_add_yet = false;
  +DC->user_creatable = true;
  |
  -DC->cannot_instantiate_with_device_add_yet = true;
  +DC->user_creatable = false;
  )

  @@
  typedef ObjectClass;
  expression dc;
  identifier class, data;
  @@
   static void device_class_init(ObjectClass *class, void *data)
   {
   ...
   dc->hotpluggable = true;
  +dc->user_creatable = true;
   ...
   }

  @@
  @@
   struct DeviceClass {
   ...
  -bool cannot_instantiate_with_device_add_yet;
  +bool user_creatable;
   ...
  }

  @@
  expression DC;
  @@
  (
  -!DC->cannot_instantiate_with_device_add_yet
  +DC->user_creatable
  |
  -DC->cannot_instantiate_with_device_add_yet
  +!DC->user_creatable
  )

Cc: Alistair Francis <alistair.francis@xilinx.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Marcel Apfelbaum <marcel@redhat.com>
Cc: Markus Armbruster <armbru@redhat.com>
Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: Thomas Huth <thuth@redhat.com>
Acked-by: Alistair Francis <alistair.francis@xilinx.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
Acked-by: Marcel Apfelbaum <marcel@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <20170503203604.31462-2-ehabkost@redhat.com>
[ehabkost: kept "TODO remove once we're there" comment]
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2017-05-17 10:37:00 -03:00
Juan Quintela b06424de62 migration: Disable hotplug/unplug during migration
Until we have reviewed what can/can't be hotplugged during migration,
disable it.  We can enable it later for the things that we know that
work.  For instance, memory hotplug during postcopy doesn't work
currently.

Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: zhanghailiang <zhang.zhanghailiang@huawei.com>

--

- Fix typo.  Thanks Thomas.
- Delay migration check after we have checked that we can hotplug that
  device.
- more typos
2017-04-21 12:25:40 +02:00
Juan Quintela 329006799f qdev: Move qdev_unplug() to qdev-monitor.c
It is not used by linux-user, otherwise I need to to create one stub
for migration_is_idle() on following patch.

Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
2017-04-21 12:25:40 +02:00
Ashijeet Acharya 7562f90707 migrate: Introduce a 'dc->vmsd' check to avoid segfault for --only-migratable
Commit a3a3d8c7 introduced a segfault bug while checking for
'dc->vmsd->unmigratable' which caused QEMU to crash when trying to add
devices which do no set their 'dc->vmsd' yet while initialization.
Place a 'dc->vmsd' check prior to it so that we do not segfault for
such devices.

NOTE: This doesn't compromise the functioning of --only-migratable
option as all the unmigratable devices do set their 'dc->vmsd'.

Introduce a new function check_migratable() and move the
only_migratable check inside it, also use stubs to avoid user-mode qemu
build failures.

Signed-off-by: Ashijeet Acharya <ashijeetacharya@gmail.com>
Message-Id: <1487009088-23891-1-git-send-email-ashijeetacharya@gmail.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2017-02-28 11:30:22 +00:00
Thomas Huth ba31cc7226 Introduce DEVICE_CATEGORY_CPU for CPU devices
Now that CPUs show up in the help text of "-device ?",
we should group them into an appropriate category.

Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <1484917276-7107-1-git-send-email-thuth@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-01-27 18:07:31 +01:00
Ashijeet Acharya a3a3d8c738 migration: Allow "device add" options to only add migratable devices
Introduce checks for the unmigratable flag in the VMStateDescription
structs of respective devices when user attempts to add them. If the
"--only-migratable" was specified, all unmigratable devices will
rightly fail to add. This feature is made compatible for both "-device"
and "-usbdevice" command line options and covers their hmp and qmp
counterparts as well.

Signed-off-by: Ashijeet Acharya <ashijeetacharya@gmail.com>
Message-Id: <1484566314-3987-4-git-send-email-ashijeetacharya@gmail.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2017-01-24 17:54:47 +00:00
Juergen Gross ce49b734b4 qdev: add function qdev_set_id()
In order to have an easy way to add a new qdev with a specific id
carve out the needed functionality from qdev_device_add() into a new
function qdev_set_id().

Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Signed-off-by: Stefano Stabellini <sstabellini@kernel.org>
2016-11-22 10:29:37 -08:00
Kevin Wolf 9680caee0f qdev-monitor: Add blk_by_qdev_id()
This finds the BlockBackend attached to the device model identified by
its qdev ID.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
2016-09-23 13:36:10 +02:00
Kevin Wolf 6c1db528b0 qdev-monitor: Factor out find_device_state()
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
2016-09-23 13:36:10 +02:00
Veronia Bahaa f348b6d1a5 util: move declarations out of qemu-common.h
Move declarations out of qemu-common.h for functions declared in
utils/ files: e.g. include/qemu/path.h for utils/path.c.
Move inline functions out of qemu-common.h and into new files (e.g.
include/qemu/bcd.h)

Signed-off-by: Veronia Bahaa <veroniabahaa@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-03-22 22:20:17 +01:00
Sascha Silbe 588c36cac7 qdev-monitor: add missing aliases for virtio device classes
virtio-{blk,balloon,net,serial} are aliases for their actual,
architecture-dependent implementations (*-ccw on s390x, *-pci on other
architectures supporting virtio). This makes it a lot easier to craft
qemu invocations that work on all supported architectures. Complete
the set to cover all existing non-abstract virtio device classes.

For virtio-balloon, only the CCW implementation was missing.

Signed-off-by: Sascha Silbe <silbe@linux.vnet.ibm.com>
Message-Id: <1455831854-49013-4-git-send-email-silbe@linux.vnet.ibm.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-03-16 10:13:10 +01:00
Sascha Silbe 36e9916811 qdev-monitor: sort alias table by typename
Sort the alias table by typename so it's easier to see which aliases
exist.

Signed-off-by: Sascha Silbe <silbe@linux.vnet.ibm.com>
Message-Id: <1455831854-49013-3-git-send-email-silbe@linux.vnet.ibm.com>
Reviewed-by: Halil Pasic <pasic@linux.vnet.ibm.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-03-16 10:13:10 +01:00
Sascha Silbe f6b5319d41 qdev-monitor: improve error message when alias device is unavailable
When trying to instantiate an alias that points to a device class that
doesn't exist, the error message looks like qemu misunderstood the
request:

$ s390x-softmmu/qemu-system-s390x -device virtio-gpu
qemu-system-s390x: -device virtio-gpu: 'virtio-gpu-ccw' is not a valid
device model name

Special-case the error message to make it explicit that alias
expansion is going on:

$ s390x-softmmu/qemu-system-s390x -device virtio-gpu
qemu-system-s390x: -device virtio-gpu: 'virtio-gpu' (alias
'virtio-gpu-ccw') is not a valid device model name

Suggested-By: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Sascha Silbe <silbe@linux.vnet.ibm.com>
Message-Id: <1455831854-49013-2-git-send-email-silbe@linux.vnet.ibm.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-03-16 10:13:10 +01:00
Peter Maydell d38ea87ac5 all: Clean up includes
Clean up includes so that osdep.h is included first and headers
which it implies are not included manually.

This commit was created with scripts/clean-includes.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1454089805-5470-16-git-send-email-peter.maydell@linaro.org
2016-02-04 17:41:30 +00:00
Markus Armbruster 7828867198 error: Use error_report_err() instead of ad hoc prints
Unlike ad hoc prints, error_report_err() uses the error whole instead
of just its message obtained with error_get_pretty().  This avoids
suppressing its hint (see commit 50b7b00).  Example:

    $ bld/ivshmem-server -l 42@
    Parameter 'shm_size' expects a size
    You may use k, M, G or T suffixes for kilobytes, megabytes, gigabytes and terabytes.

The last line is new with this patch.

While there, drop a "cannot parse shm size: " message prefix; it's
redundant, because the error message proper is always of the form
"Parameter 'shm_size' expects ...".

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <1450452927-8346-5-git-send-email-armbru@redhat.com>
2016-01-13 15:16:16 +01:00
Markus Armbruster 543202c0dd error: Don't append a newline when printing the error hint
Since commit 50b7b00, we have error_append_hint() to conveniently
accumulate Error member @hint.  error_report_err() prints it with a
newline appended.  Consequently, users of error_append_hint() need to
know whether theirs is the final line of the hint to decide whether it
needs a newline.  Not a nice interface.

Change error_report_err() to print just the hint, and the (still few)
users of error_append_hint() to add the required newline.

Cc: Eric Blake <eblake@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <1450370121-5768-7-git-send-email-armbru@redhat.com>
2016-01-13 11:58:58 +01:00
Peter Maydell 0bf224d5da -----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
 
 iQEcBAABAgAGBQJWG2e/AAoJEO8Ells5jWIRcYcH/2D11W8cToCBjGDuw/u9K1ht
 S3oGyFasOEq3lm3+a3zQE+vDw0RDkjLEMhcTVwNskJQl6k6Ts5JleTZ6wffvUKPM
 UCozgPOCt1ZAdGskwdbByc+NhaVBHIiEsmlbDKqP22CENdDx6GWjcFW4brA4tQJQ
 AW36EH77j/M+7/KiSukcUfIexILUZJRfN+ICJVyNTpGsqUNJtFqiVPBMPyJhKCEq
 3pr3yJ2lf78SAEF5kBeBc9r/PDWUhtqExBsrK0L8Ey1FdrCy8ldqDPGecT4TsxNv
 W/KX5AqhKSsMI8DQKdbv/IKaUdjYWNjTRQ2Qjm8Vt0hcW0PhxR0NYi6bV4yjDNM=
 =f26Q
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/jasowang/tags/net-pull-request' into staging

# gpg: Signature made Mon 12 Oct 2015 08:56:47 BST using RSA key ID 398D6211
# gpg: Good signature from "Jason Wang (Jason Wang on RedHat) <jasowang@redhat.com>"
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg:          It is not certain that the signature belongs to the owner.
# Primary key fingerprint: 215D 46F4 8246 689E C77F  3562 EF04 965B 398D 6211

* remotes/jasowang/tags/net-pull-request:
  tests: add test cases for netfilter object
  netfilter: add a netbuffer filter
  net/queue: export qemu_net_queue_append_iov
  netfilter: print filter info associate with the netdev
  netfilter: add an API to pass the packet to next filter
  net/queue: introduce NetQueueDeliverFunc
  net: merge qemu_deliver_packet and qemu_deliver_packet_iov
  netfilter: hook packets before net queue send
  init/cleanup of netfilter object
  vl.c: init delayed object after net_init_clients
  vmxnet3: Add support for VMXNET3_CMD_GET_ADAPTIVE_RING_INFO command
  e1000: use alias for default model
  vmxnet3: Support reading IMR registers on bar0
  net/vmxnet3: Refine l2 header validation

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-10-12 14:29:29 +01:00
Jason Wang 8304402033 e1000: use alias for default model
Instead of duplicating the "e1000-82540em" device model as "e1000",
make the latter an alias for the former.

Cc: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com
Reviewed-by: Markus Armbruster <armbru@redhat.com>
2015-10-12 13:19:29 +08:00
Markus Armbruster 33fe968330 Revert "qdev: Use qdev_get_device_class() for -device <type>,help"
This reverts commit 31bed5509d.

The reverted commit changed qdev_device_help() to reject abstract
devices and devices that have cannot_instantiate_with_device_add_yet
set, to fix crash bugs like -device x86_64-cpu,help.

Rejecting abstract devices makes sense: they're purely internal, and
the implementation of the help feature can't cope with them.

Rejecting non-pluggable devices makes less sense: even though you
can't use them with -device, the help may still be useful elsewhere,
for instance with -global.  This is a regression: -device FOO,help
used to help even for FOO that aren't pluggable.

The previous two commits fixed the crash bug at a lower layer, so
reverting this one is now safe.  Fixes the -device FOO,help
regression, except for the broken devices marked
cannot_even_create_with_object_new_yet.  For those, the error message
is improved.

Example of a device where the regression is fixed:

    $ qemu-system-x86_64 -device PIIX4_PM,help
    PIIX4_PM.command_serr_enable=bool (on/off)
    PIIX4_PM.multifunction=bool (on/off)
    PIIX4_PM.rombar=uint32
    PIIX4_PM.romfile=str
    PIIX4_PM.addr=int32 (Slot and optional function number, example: 06.0 or 06)
    PIIX4_PM.memory-hotplug-support=bool
    PIIX4_PM.acpi-pci-hotplug-with-bridge-support=bool
    PIIX4_PM.s4_val=uint8
    PIIX4_PM.disable_s4=uint8
    PIIX4_PM.disable_s3=uint8
    PIIX4_PM.smb_io_base=uint32

Example of a device where it isn't fixed:

    $ qemu-system-x86_64 -device host-x86_64-cpu,help
    Can't list properties of device 'host-x86_64-cpu'

Both failed with "Parameter 'driver' expects pluggable device type"
before.

Cc: qemu-stable@nongnu.org
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <1443689999-12182-11-git-send-email-armbru@redhat.com>
2015-10-09 15:25:57 +02:00
Daniel P. Berrange 6287d827d4 monitor: allow device_del to accept QOM paths
Currently device_del requires that the client provide the
device short ID. device_add allows devices to be created
without giving an ID, at which point there is no way to
delete them with device_del. The QOM object path, however,
provides an alternative way to identify the devices.

Allowing device_del to accept an object path ensures all
devices are deletable regardless of whether they have an
ID.

 (qemu) device_add usb-mouse
 (qemu) qom-list /machine/peripheral-anon
 device[0] (child<usb-mouse>)
 type (string)
 (qemu) device_del /machine/peripheral-anon/device[0]

Devices are required to be marked as hotpluggable
otherwise an error is raised

 (qemu) device_del /machine/unattached/device[4]
 Device 'PIIX3' does not support hotplugging

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-Id: <1441974836-17476-1-git-send-email-berrange@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
[Commit message touched up, accidental white-space change dropped]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
2015-09-22 11:31:56 +02:00
Eric Blake 50b7b000c9 hmp: Allow for error message hints on HMP
Commits 7216ae3d and d2828429 disabled some error message hints,
all because a change to use modern error reporting meant that the
hint would be output prior to the actual error.  Fix this by making
hints a first-class member of Error.

For example, we are now back to the pleasant:

 $ qemu-system-x86_64 --nodefaults -S --vnc :0 --chardev null,id=,
 qemu-system-x86_64: --chardev null,id=,: Parameter 'id' expects an identifier
 Identifiers consist of letters, digits, '-', '.', '_', starting with a letter.

Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <1441901956-21991-1-git-send-email-eblake@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
2015-09-18 14:34:39 +02:00
Markus Armbruster cc7a8ea740 Include qapi/qmp/qerror.h exactly where needed
In particular, don't include it into headers.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
2015-06-22 18:20:41 +02:00
Markus Armbruster d49b683644 qerror: Move #include out of qerror.h
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
2015-06-22 18:20:40 +02:00
Markus Armbruster 485febc6d1 qmp: Wean off qerror_report()
The traditional QMP command handler interface

    int qmp_FOO(Monitor *mon, const QDict *params, QObject **ret_data);

doesn't provide for returning an Error object.  Instead, the handler
is expected to stash it in the monitor with qerror_report().

When we rebased QMP on top of QAPI, we didn't change this interface.
Instead, commit 776574d introduced "middle mode" as a temporary aid
for converting existing QMP commands to QAPI one by one.  More than
three years later, we're still using it.

Middle mode has two effects:

* Instead of the native input marshallers

      static void qmp_marshal_input_FOO(QDict *, QObject **, Error **)

  it generates input marshallers conforming to the traditional QMP
  command handler interface.

* It suppresses generation of code to register them with
  qmp_register_command()

  This permits giving them internal linkage.

As long as we need qmp-commands.hx, we can't use the registry behind
qmp_register_command(), so the latter has to stay for now.

The former has to go to get rid of qerror_report().  Changing all QMP
commands to fit the QAPI mold in one go was impractical back when we
started, but by now there are just a few stragglers left:
do_qmp_capabilities(), qmp_qom_set(), qmp_qom_get(), qmp_object_add(),
qmp_netdev_add(), do_device_add().

Switch middle mode to generate native input marshallers, and adapt the
stragglers.  Simplifies both the monitor code and the stragglers.

Rename do_qmp_capabilities() to qmp_capabilities(), and
do_device_add() to qmp_device_add, because that's how QMP command
handlers are named today.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
2015-06-22 18:20:40 +02:00
Markus Armbruster c6bd8c706a qerror: Clean up QERR_ macros to expand into a single string
These macros expand into error class enumeration constant, comma,
string.  Unclean.  Has been that way since commit 13f59ae.

The error class is always ERROR_CLASS_GENERIC_ERROR since the previous
commit.

Clean up as follows:

* Prepend every use of a QERR_ macro by ERROR_CLASS_GENERIC_ERROR, and
  delete it from the QERR_ macro.  No change after preprocessing.

* Rewrite error_set(ERROR_CLASS_GENERIC_ERROR, ...) into
  error_setg(...).  Again, no change after preprocessing.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
2015-06-22 18:20:40 +02:00
Markus Armbruster 75158ebbe2 qerror: Eliminate QERR_DEVICE_NOT_FOUND
Error classes other than ERROR_CLASS_GENERIC_ERROR should not be used
in new code.  Hiding them in QERR_ macros makes new uses hard to spot.
Fortunately, there's just one such macro left.  Eliminate it with this
coccinelle semantic patch:

    @@
    expression EP, E;
    @@
    -error_set(EP, QERR_DEVICE_NOT_FOUND, E)
    +error_set(EP, ERROR_CLASS_DEVICE_NOT_FOUND, "Device '%s' not found", E)

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
2015-06-22 18:20:39 +02:00
Markus Armbruster 70b9433109 QemuOpts: Wean off qerror_report_err()
qerror_report_err() is a transitional interface to help with
converting existing monitor commands to QMP.  It should not be used
elsewhere.

The only remaining user in qemu-option.c is qemu_opts_parse().  Is it
used in QMP context?  If not, we can simply replace
qerror_report_err() by error_report_err().

The uses in qemu-img.c, qemu-io.c, qemu-nbd.c and under tests/ are
clearly not in QMP context.

The uses in vl.c aren't either, because the only QMP command handlers
there are qmp_query_status() and qmp_query_machines(), and they don't
call it.

Remaining uses:

* drive_def(): Command line -drive and such, HMP drive_add and pci_add

* hmp_chardev_add(): HMP chardev-add

* monitor_parse_command(): HMP core

* tmp_config_parse(): Command line -tpmdev

* net_host_device_add(): HMP host_net_add

* net_client_parse(): Command line -net and -netdev

* qemu_global_option(): Command line -global

* vnc_parse_func(): Command line -display, -vnc, default display, HMP
  change, QMP change.  Bummer.

* qemu_pci_hot_add_nic(): HMP pci_add

* usb_net_init(): Command line -usbdevice, HMP usb_add

Propagate errors through qemu_opts_parse().  Create a convenience
function qemu_opts_parse_noisily() that passes errors to
error_report_err().  Switch all non-QMP users outside tests to it.

That leaves vnc_parse_func().  Propagate errors through it.  Since I'm
touching it anyway, rename it to vnc_parse().

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
2015-06-22 18:20:39 +02:00
Markus Armbruster f006cf7fa9 qdev-monitor: Propagate errors through qdev_device_add()
Also polish an error message while I'm touching the line anyway,

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Andreas Färber <afaerber@suse.de>
2015-06-22 18:20:39 +02:00
Markus Armbruster 4caa489d13 qdev-monitor: Propagate errors through set_property()
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Andreas Färber <afaerber@suse.de>
2015-06-22 18:20:39 +02:00
Markus Armbruster d282842999 qdev-monitor: Convert qbus_find() to Error
As usual, the conversion breaks printing explanatory messages after
the error: actual printing of the error gets delayed, so the
explanations precede rather than follow it.

Pity.  Disable them for now.  See also commit 7216ae3.

While there, eliminate QERR_BUS_NOT_FOUND, and clean up unusual
spelling in the error message.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
2015-06-22 18:20:39 +02:00
Markus Armbruster ed238ba2a0 qdev-monitor: Fix check for full bus
Property bus has always been too screwed up to be really usable for
values other than plain bus IDs.  This just fixes a bug that crept in
in commit 1395af6 "qdev: add a maximum device allowed field for the
bus."

It doesn't always fail when it should:

    $ qemu-system-x86_64 -nodefaults -device virtio-serial-pci -device virtio-rng-device,bus=pci.0/virtio-serial-pci/virtio-bus

Happily plugs the virtio-rng-device into the virtio-bus provided by
virtio-serial-pci, even though its only slot is already occupied by a
virtio-serial-device.

And sometimes fails when it shouldn't:

    $ qemu-system-x86_64 -nodefaults -device virtio-serial-pci -device virtserialport,bus=virtio-bus/virtio-serial-device

Yes, the virtio-bus is full, but the virtio-serial-bus provided by
virtio-serial-device isn't, and that's the one we're trying to use.

Root cause: we check "bus full" when we resolve the first element of
the path.  That's the correct one only when it's also the last one.

Fix by moving the "bus full" check to right before we return a bus.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
2015-06-22 18:20:39 +02:00
Markus Armbruster a5ec494e27 qdev-monitor: Stop error avalanche in qbus_find_recursive()
Reproducer:

    $ qemu-system-x86_64 -nodefaults -device virtio-rng-pci -device virtio-rng-pci -device virtio-rng-device,bus=virtio-bus
    qemu-system-x86_64: -device virtio-rng-device,bus=virtio-bus: Bus 'virtio-bus' is full
    qemu-system-x86_64: -device virtio-rng-device,bus=virtio-bus: Bus 'virtio-bus' is full
    qemu-system-x86_64: -device virtio-rng-device,bus=virtio-bus: Bus 'virtio-bus' not found

qbus_find_recursive() reports the "is full" error itself, and leaves
reporting "not found" to its caller.  The result is confusion.  Write
it a function contract that permits leaving all error reporting to the
caller, and implement it.  Update callers to detect and report "is
full".

Screwed up when commit 1395af6 added the max_dev limit and the "is
full" error condition to enforce it.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
2015-06-22 18:20:39 +02:00
Alexander Graf 1f68f1d36c s390x: Switch to s390-ccw machine as default
We now finally have TCG support for the basic set of instructions necessary
to run the s390-ccw machine. That means in any aspect possible that machine
type is now superior to the legacy s390-virtio machine.

Switch over to the ccw machine as default. That way people don't get a halfway
broken machine with the s390x target.

Signed-off-by: Alexander Graf <agraf@suse.de>
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
2015-06-17 12:40:52 +02:00
Markus Armbruster 71df1d8337 QemuOpts: Convert qemu_opt_foreach() to Error
Retain the function value for now, to permit selective conversion of
its callers.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
2015-06-09 07:40:23 +02:00
Markus Armbruster 1640b200d5 QemuOpts: Drop qemu_opt_foreach() parameter abort_on_failure
When the argument is non-zero, qemu_opt_foreach() stops on callback
returning non-zero, and returns that value.

When the argument is zero, it doesn't stop, and returns the callback's
value from the last iteration.

The two callers that pass zero could just as well pass one:

* qemu_spice_init()'s callback add_channel() either returns zero or
  exit()s.

* config_write_opts()'s callback config_write_opt() always returns
  zero.

Drop the parameter, and always stop.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
2015-06-09 07:40:23 +02:00
Paolo Bonzini 3751d7c43f vl: allow full-blown QemuOpts syntax for -global
-global does not work for drivers that have a dot in their name, such as
cfi.pflash01.  This is just a parsing limitation, because such globals
can be declared easily inside a -readconfig file.

To allow this usage, support the full QemuOpts key/value syntax for -global
too, for example "-global driver=cfi.pflash01,property=secure,value=on".
The two formats do not conflict, because the key/value syntax does not have
a period before the first equal sign.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-06-05 17:36:39 +02:00
Andreas Färber a01ff75fcd qom: Implement info qom-tree HMP command
To complement qdev's bus-oriented info qtree, info qom-tree
prints a hierarchical view of the QOM composition tree.

By default, the machine composition tree is shown. This can be overriden
by supplying a path argument, such as "info qom-tree /".

Tested-by: Alistair Francis <alistair.francis@xilinx.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
2015-03-17 14:31:21 +01:00
Markus Armbruster f43e47dbf6 QemuOpts: Drop qemu_opt_set(), rename qemu_opt_set_err(), fix use
qemu_opt_set() is a wrapper around qemu_opt_set() that reports the
error with qerror_report_err().

Most of its users assume the function can't fail.  Make them use
qemu_opt_set_err() with &error_abort, so that should the assumption
ever break, it'll break noisily.

Just two users remain, in util/qemu-config.c.  Switch them to
qemu_opt_set_err() as well, then rename qemu_opt_set_err() to
qemu_opt_set().

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
2015-02-26 14:49:31 +01:00
Markus Armbruster 1ce6be24df hmp: Name HMP info handler functions hmp_info_SUBCOMMAND()
Some are called do_info_SUBCOMMAND() (old ones, usually), some
hmp_info_SUBCOMMAND(), some SUBCOMMAND_info(), sometimes SUBCOMMAND
pointlessly differs in spelling.

Normalize to hmp_info_SUBCOMMAND(), where SUBCOMMAND is exactly the
subcommand name with '-' replaced by '_'.

Exceptions:

* sun4m_irq_info(), sun4m_pic_info() renamed to sun4m_hmp_info_irq(),
  sun4m_hmp_info_pic().

* lm32_irq_info(), lm32_pic_info() renamed to lm32_hmp_info_irq(),
  lm32_hmp_info_pic().

Signed-off-by: Markus Armbruster <armbru@redhat.com>
2015-02-18 11:58:50 +01:00
Eduardo Habkost 31bed5509d qdev: Use qdev_get_device_class() for -device <type>,help
Make sure we try to list properties from classes that can be safely used
with "-device".

Fixes the following crashes:

  $ qemu-system-x86_64 -device x86_64-cpu,help
  **
  ERROR:qom/object.c:336:object_initialize_with_type: assertion failed: (type->abstract == false)
  Aborted (core dumped)
  $ qemu-system-x86_64 -device host-x86_64-cpu,help
  qemu-system-x86_64: [...]/target-i386/cpu.c:1329: host_x86_cpu_initfn: Assertion `(kvm_allowed)' failed.
  Aborted (core dumped)

After applying this patch:

  $ qemu-system-x86_64 -device x86_64-cpu,help
  Parameter 'driver' expects non-abstract device type
  $ qemu-system-x86_64 -device host-x86_64-cpu,help
  Parameter 'driver' expects pluggable device type

Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
2014-11-04 17:50:00 +01:00
Eduardo Habkost 5185f0e0a6 qdev: Move error printing to the end of qdev_device_help()
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
2014-11-04 17:50:00 +01:00
Eduardo Habkost 43c95d782d qdev: Create qdev_get_device_class() function
Extract the DeviceClass lookup from qdev_device_add() to a separate
function.

Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
2014-11-04 17:50:00 +01:00
Gonglei 07d09c58db qmp: Print descriptions of object properties
Add a new "description" field to DevicePropertyInfo.
The descriptions can serve as documentation in the code,
and they can be used to provide better help. For example:

$./qemu-system-x86_64 -device virtio-blk-pci,?

Before this patch:

virtio-blk-pci.iothread=link<iothread>
virtio-blk-pci.x-data-plane=bool
virtio-blk-pci.scsi=bool
virtio-blk-pci.config-wce=bool
virtio-blk-pci.serial=str
virtio-blk-pci.secs=uint32
virtio-blk-pci.heads=uint32
virtio-blk-pci.cyls=uint32
virtio-blk-pci.discard_granularity=uint32
virtio-blk-pci.bootindex=int32
virtio-blk-pci.opt_io_size=uint32
virtio-blk-pci.min_io_size=uint16
virtio-blk-pci.physical_block_size=uint16
virtio-blk-pci.logical_block_size=uint16
virtio-blk-pci.drive=str
virtio-blk-pci.virtio-backend=child<virtio-blk-device>
virtio-blk-pci.command_serr_enable=on/off
virtio-blk-pci.multifunction=on/off
virtio-blk-pci.rombar=uint32
virtio-blk-pci.romfile=str
virtio-blk-pci.addr=pci-devfn
virtio-blk-pci.event_idx=on/off
virtio-blk-pci.indirect_desc=on/off
virtio-blk-pci.vectors=uint32
virtio-blk-pci.ioeventfd=on/off
virtio-blk-pci.class=uint32

After:

virtio-blk-pci.iothread=link<iothread>
virtio-blk-pci.x-data-plane=bool (on/off)
virtio-blk-pci.scsi=bool (on/off)
virtio-blk-pci.config-wce=bool (on/off)
virtio-blk-pci.serial=str
virtio-blk-pci.secs=uint32
virtio-blk-pci.heads=uint32
virtio-blk-pci.cyls=uint32
virtio-blk-pci.discard_granularity=uint32
virtio-blk-pci.bootindex=int32
virtio-blk-pci.opt_io_size=uint32
virtio-blk-pci.min_io_size=uint16
virtio-blk-pci.physical_block_size=uint16 (A power of two between 512 and 32768)
virtio-blk-pci.logical_block_size=uint16 (A power of two between 512 and 32768)
virtio-blk-pci.drive=str (ID of a drive to use as a backend)
virtio-blk-pci.virtio-backend=child<virtio-blk-device>
virtio-blk-pci.command_serr_enable=bool (on/off)
virtio-blk-pci.multifunction=bool (on/off)
virtio-blk-pci.rombar=uint32
virtio-blk-pci.romfile=str
virtio-blk-pci.addr=int32 (Slot and optional function number, example: 06.0 or 06)
virtio-blk-pci.event_idx=bool (on/off)
virtio-blk-pci.indirect_desc=bool (on/off)
virtio-blk-pci.vectors=uint32
virtio-blk-pci.ioeventfd=bool (on/off)
virtio-blk-pci.class=uint32

Cc: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
2014-10-15 05:03:15 +02:00
Igor Mammedov b6cc36abb2 qdev: device_del: Search for to be unplugged device in 'peripheral' container
device_add puts every device with 'id' inside of 'peripheral'
container using id's value as the last component name.
Use it by replacing recursive search on sysbus with path
lookup in 'peripheral' container, which could handle both
BUS and BUS-less device cases.

Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
2014-10-15 05:03:15 +02:00
Igor Mammedov ce9835e00d qdev: do not allow to instantiate non hotpluggable device with device_add
It will allow explicitly mark device as not hotpluggable and
avoid its creation with following error at realize time
and destroying it afterwards anyway. Instead of it will
error out even before instance of device is created.

Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
2014-10-15 05:03:13 +02:00
Igor Mammedov 39b888bd88 Access BusState::allow_hotplug using wraper qbus_is_hotpluggable()
It would allow to transparently switch detection whether Bus
is hotpluggable from allow_hotplug field to hotplug_handler
link and to drop allow_hotplug field once all users are
converted to hotplug handler API.

Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
2014-10-15 05:03:13 +02:00
Gonglei 0722eba945 qdev-monitor: fix segmentation fault on qdev_device_help()
Normally, qmp_device_list_properties() may return NULL when
a device haven't special properties excpet Object and DeviceState
properties, such as virtio-balloon-device.

We just need check local_err instead of prop_list.

Example:

Segmentation fault (core dumped)

The backtrace as below:

Program received signal SIGSEGV, Segmentation fault.
0x00005555559af1a8 in error_get_pretty (err=0x0) at util/error.c:152
152         return err->msg;
(gdb) bt
    func=0x55555574a6ca <device_help_func>, opaque=0x0, abort_on_failure=0) at util/qemu-option.c:1072

Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-09-22 11:39:18 +01:00
Peter Maydell 142f4ac5d5 trivial patches for 2014-08-15
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.12 (GNU/Linux)
 
 iQEcBAABAgAGBQJT7iN/AAoJEL7lnXSkw9fbgVcH/20bga0KUQ+FDMg7pr0jBK3J
 6d7DLwsmypEiKN8D7mQz/xDX4uwtWQu4PXERn8UEfE0xVrnNDGOYpYtj2kb7z3/T
 F33oosGHz9XKdhGg6x4ZLirhjJdVsj90SJ37D4haxFP5CeRjs8c3RFOekI0qwyXm
 /t+mDdWsADYaZ1WaFOo0kcNCROYudaRV2isubQFUqKgjWmIx+Y+2xSXtTWU3UAVx
 dDcEvTYdDNucor2kV1/F2iULHMXNOPjvvV59ARBkzTyaSday4waGptAOL9eQInSA
 DcJuRZwY2lpm1YuJN4b5UzZ849R3X9zA1vIW6aP+NcktLoKV/bu3qVwo0v5+LMs=
 =wZLU
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/mjt/tags/trivial-patches-2014-08-15' into staging

trivial patches for 2014-08-15

# gpg: Signature made Fri 15 Aug 2014 16:13:03 BST using RSA key ID A4C3D7DB
# gpg: Good signature from "Michael Tokarev <mjt@tls.msk.ru>"
# gpg:                 aka "Michael Tokarev <mjt@corpit.ru>"
# gpg:                 aka "Michael Tokarev <mjt@debian.org>"
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg:          There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 6EE1 95D1 886E 8FFB 810D  4324 457C E0A0 8044 65C5
#      Subkey fingerprint: 6F67 E18E 7C91 C5B1 5514  66A7 BEE5 9D74 A4C3 D7DB

* remotes/mjt/tags/trivial-patches-2014-08-15:
  ivshmem: check the value returned by fstat()
  l2cap: fix access to freed memory
  intc: i8259: Convert Array allocation to g_new0
  ppc: convert g_new(qemu_irq usages to g_new0
  ssi: xilinx_spi: Initialise CS GPIOs as NULL
  vl: free err
  qemu-options.hx: fix typo about l2tpv3
  vmxnet3: don't use 'Yoda conditions'
  vl: don't use 'Yoda conditions'
  spice: don't use 'Yoda conditions'
  don't use 'Yoda conditions'
  isa-bus: don't use 'Yoda conditions'
  audio: don't use 'Yoda conditions'
  usb: don't use 'Yoda conditions'
  CODING_STYLE: Section about conditional statement
  pci-host: update uncorresponding description
  pci-host: update obsolete reference about piix_pci.c
  qemu-options.hx: fix a typo of chardev
  memory: Update obsolete comment about AddrRange field type
  apic: Fix reported DFR content

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-08-15 18:44:48 +01:00
Gonglei 8108fd3e26 don't use 'Yoda conditions'
imitate nearby code about using '!value' or 'value == NULL'

Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2014-08-15 18:54:07 +04:00
Stefan Hajnoczi ef523587da qdev-monitor: include QOM properties in -device FOO, help output
Update -device FOO,help to include QOM properties in addition to qdev
properties.  Devices are gradually adding more QOM properties that are
not reflected as qdev properties.

It is important to report all device properties since management tools
like libvirt use this information (and device-list-properties QMP) to
detect the presence of QEMU features.

This patch reuses the device-list-properties QMP machinery to avoid code
duplication.

Reported-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Tested-by: Cole Robinson <crobinso@redhat.com>
2014-08-15 15:07:13 +02:00