Commit Graph

149 Commits

Author SHA1 Message Date
Ronnie Sahlberg f4dfa67f04 ISCSI: Switch to using READ16/WRITE16 for I/O to the LUN
This allows using LUNs bigger than 2TB.  Keep using READ10 for other
device types such as MMC.

Signed-off-by: Ronnie Sahlberg <ronniesahlberg@gmail.com>
2012-05-28 14:04:16 +02:00
Anthony Liguori 25b9e14e78 Merge remote-tracking branch 'spice/spice.v52' into staging
* spice/spice.v52:
  qxl-render: fix broken vnc+spice since commit f934493
  qxl: set default values of vram*_size_mb to -1
  trace-events: remove unused qxl_vga_ioport_while_not_in_vga_mode
2012-04-18 07:56:18 -05:00
Alon Levy a9257af0b9 trace-events: remove unused qxl_vga_ioport_while_not_in_vga_mode
The resulting stp file fails to load because of an unresolvable probe.

Signed-off-by: Alon Levy <alevy@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2012-04-18 12:21:45 +02:00
Gerd Hoffmann 96dd9aac37 usb-host: rewrite usb_linux_update_endp_table
This patch carries a complete rewrite of the usb descriptor parser.
Changes / improvements:

 * We are using the USBDescriptor struct instead of hard-coded offsets
   now to access descriptor data.
 * (debug) printfs are all gone, tracepoints have been added instead.
 * We don't try (and fail) to skip over unneeded descriptors.  We parse
   them all one by one.  We keep track of which configuration, interface
   and altsetting we are looking at and use this information to figure
   which desciptors are in use and which we can ignore.
 * On parse errors we clear all endpoint information, which will
   disallow any communication with the device, except control endpoint
   messages.  This makes sure we don't end up with a silly device state
   where half of the endpoints got enabled and the other half was left
   disabled.
 * Some sanity checks have been added.

The new parser is more robust and also leaves complete device
information in the trace log if you enable the ush_host_parse_*
tracepoints.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2012-04-17 10:23:28 +02:00
Gerd Hoffmann 529f8f9fa9 usb-hub: add tracepoints
Add tracepoints to the usb hub emulation.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2012-04-17 10:23:27 +02:00
Gerd Hoffmann 19b89252a3 usb-host: add usb packet to request tracepoints
Add pointer to USBPacket to all tracepoints tracking requests to make it
easier to identify them when multiple requests are in flight.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2012-04-17 10:23:27 +02:00
Gerd Hoffmann 6aebe40796 usb-host: trace canceled requests
Add tracepoints to track canceled requests.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2012-04-17 10:23:27 +02:00
Gerd Hoffmann e382e751ef usb-host: trace emulated requests
Add tracepoint to track completion of emulated control requests.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2012-04-17 10:23:27 +02:00
Kevin Wolf bfe24e1a26 trace-events: Rename 'next' argument
'next' is a systemtap keyword, so it's a bad idea to use it as an
argument name.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-04-05 14:54:39 +02:00
Stefan Weil 95b752bc32 trace-events: Fix broken build caused by wrong format specifier
mem is an uint64_t value, so %lx was wrong.

Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
2012-03-26 12:34:20 +01:00
Alon Levy d53291cf59 qxl/qxl_render.c: add trace events
Signed-off-by: Alon Levy <alevy@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2012-03-19 13:12:19 +01:00
Alon Levy c480bb7da4 qxl: switch qxl.c to trace-events
dprint is still used for qxl_init_common one time prints.

also switched parts of spice-display.c over, mainly all the callbacks to
spice server.

All qxl device trace events start with the qxl device id.

Signed-off-by: Alon Levy <alevy@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2012-03-19 13:12:19 +01:00
Gerd Hoffmann 50dcc0f85d uhci: tracing support
Zap DPRINTF, add tracepoints instead.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2012-03-13 10:15:32 +01:00
Gerd Hoffmann 5ac2731cf8 usb: improve packet state sanity checks
Add a new function to check whenever the packet state is as expected,
log more informations in case it isn't.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2012-03-13 10:15:32 +01:00
Gerd Hoffmann f1ae32a1ec usb: the big rename
Reorganize usb source files.  Create a new hw/usb/ directory and move
all usb source code to that place.  Also make filenames a bit more
descriptive.  Host adapters are prefixed with "hch-" now, usb device
emulations are prefixed with "dev-".  Fixup paths Makefile and include
paths to make it compile.  No code changes.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2012-03-13 10:15:32 +01:00
Anthony Liguori fb23ae6e41 Merge remote-tracking branch 'kwolf/for-anthony' into staging
* kwolf/for-anthony:
  test-coroutine: add performance test for nesting
  coroutine: adding configure option for sigaltstack coroutine backend
  coroutine: adding configure choose mechanism for coroutine backend
  coroutine: adding sigaltstack method (.c source)
  qcow2: Reduce number of I/O requests
  qcow2: Add qcow2_alloc_clusters_at()
  qcow2: Factor out count_cow_clusters
  qmp: convert blockdev-snapshot-sync to a wrapper around transactions
  add mode field to blockdev-snapshot-sync transaction item
  rename blockdev-group-snapshot-sync
  qapi: complete implementation of unions
  use QSIMPLEQ_FOREACH_SAFE when freeing list elements
  Add 'make check-block'
  make check: Add qemu-iotests subset
  qemu-iotests: Mark some tests as quick
  qcow2: Add error messages in qcow2_truncate
  block: handle -EBUSY in bdrv_commit_all()
  qcow2: Add some tracing
  qed: do not evict in-use L2 table cache entries
  Group snapshot: Fix format name for backing file
2012-03-12 20:51:42 -05:00
Kevin Wolf 250196f19c qcow2: Reduce number of I/O requests
If the first part of a write request is allocated, but the second isn't
and it can be allocated so that the resulting area is contiguous, handle
it at once. This is a common case for sequential writes.

After this patch, alloc_cluster_offset() only checks if the clusters are
already allocated or how many new clusters can be allocated contigouosly.
The actual cluster allocation is split off into a new function
do_alloc_cluster_offset().

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
2012-03-12 15:14:07 +01:00
Kevin Wolf 3cce16f44d qcow2: Add some tracing
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
2012-03-12 15:14:06 +01:00
Alon Levy 727500181a vga: add trace event for ppm_save
Signed-off-by: Alon Levy <alevy@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
2012-03-12 10:30:27 +00:00
Alon Levy cdbc19dd8d console: add some trace events
Signed-off-by: Alon Levy <alevy@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
2012-03-12 10:30:23 +00:00
Gerd Hoffmann 808aeb98ff usb: add tracepoint for usb packet state changes.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2012-02-27 13:37:36 +01:00
Hervé Poussineau 63b9932dd0 jazz-led: use trace framework
Signed-off-by: Hervé Poussineau <hpoussin@reactos.org>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-02-22 09:02:19 -06:00
Stefan Hajnoczi 6e4f59bd0d qed: replace is_write with flags field
Per-request attributes like read/write are currently implemented as bool
fields in the QEDAIOCB struct.  This becomes unwiedly as the number of
attributes grows.  For example, the qed_aio_setup() function would have
to take multiple bool arguments and at call sites it would be hard to
distinguish the meaning of each bool.

Instead use a flags field with bitmask constants.  This will be used
when zero write support is added.

Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-02-09 16:17:50 +01:00
Stefan Hajnoczi f08f2ddae0 block: add .bdrv_co_write_zeroes() interface
The ability to zero regions of an image file is a useful primitive for
higher-level features such as image streaming or zero write detection.

Image formats may support an optimized metadata representation instead
of writing zeroes into the image file.  This allows zero writes to be
potentially faster than regular write operations and also preserve
sparseness of the image file.

The .bdrv_co_write_zeroes() interface should be implemented by block
drivers that wish to provide efficient zeroing.

Note that this operation is different from the discard operation, which
may leave the contents of the region indeterminate.  That means
discarded blocks are not guaranteed to contain zeroes and may contain
junk data instead.

Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-02-09 16:17:50 +01:00
Fabien Chouteau 0c685d2827 GRLIB UART: Add RX channel
This patch implements the RX channel of GRLIB UART with a FIFO to
improve data rate.

Signed-off-by: Fabien Chouteau <chouteau@adacore.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2012-01-30 19:13:21 +00:00
Stefan Hajnoczi 81b6b9faef virtio-blk: add virtio_blk_handle_read trace event
There already exists a virtio_blk_handle_write trace event as well as
completion events.  Add the virtio_blk_handle_read event so it's easy to
trace virtio-blk requests for both read and write operations.

Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-01-26 14:49:18 +01:00
Stefan Hajnoczi 370521a1d6 qmp: add block_job_cancel command
Add block_job_cancel, which stops an active block streaming operation.
When the operation has been cancelled the new BLOCK_JOB_CANCELLED event
is emitted.

Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Acked-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-01-26 14:49:18 +01:00
Stefan Hajnoczi 12bd451fe0 qmp: add block_stream command
Add the block_stream command, which starts copy backing file contents
into the image file.  Also add the BLOCK_JOB_COMPLETED QMP event which
is emitted when image streaming completes.  Later patches add control
over the background copy speed, cancelation, and querying running
streaming operations.

Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Acked-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-01-26 14:49:14 +01:00
Stefan Hajnoczi 4f1043b4ff block: add image streaming block job
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-01-26 11:45:26 +01:00
Stefan Hajnoczi 470c05047a block: make copy-on-read a per-request flag
Previously copy-on-read could only be enabled for all requests to a
block device.  This means requests coming from the guest as well as
QEMU's internal requests would perform copy-on-read when enabled.

For image streaming we want to support finer-grained behavior than just
populating the image file from its backing image.  Image streaming
supports partial streaming where a common backing image is preserved.
In this case guest requests should not perform copy-on-read because they
would indiscriminately copy data which should be left in a backing image
from the backing chain.

Introduce a per-request flag for copy-on-read so that a block device can
process both regular and copy-on-read requests.  Overlapping reads and
writes still need to be serialized for correctness when copy-on-read is
happening, so add an in-flight reference count to track this.

Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-01-26 11:45:26 +01:00
Anthony Liguori 5b4448d27d Merge remote-tracking branch 'qemu-kvm/uq/master' into staging
* qemu-kvm/uq/master:
  kvm: Activate in-kernel irqchip support
  kvm: x86: Add user space part for in-kernel IOAPIC
  kvm: x86: Add user space part for in-kernel i8259
  kvm: x86: Add user space part for in-kernel APIC
  kvm: x86: Establish IRQ0 override control
  kvm: Introduce core services for in-kernel irqchip support
  memory: Introduce memory_region_init_reservation
  ioapic: Factor out base class for KVM reuse
  ioapic: Drop post-load irr initialization
  i8259: Factor out base class for KVM reuse
  i8259: Completely privatize PicState
  apic: Open-code timer save/restore
  apic: Factor out base class for KVM reuse
  apic: Introduce apic_report_irq_delivered
  apic: Inject external NMI events via LINT1
  apic: Stop timer on reset
  kvm: Move kvmclock into hw/kvm folder
  msi: Generalize msix_supported to msi_supported
  hyper-v: initialize Hyper-V CPUID leaves.
  hyper-v: introduce Hyper-V support infrastructure.

Conflicts:
	Makefile.target

Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-01-23 11:00:26 -06:00
Jan Kiszka 343270ea87 apic: Introduce apic_report_irq_delivered
The in-kernel i8259 and IOAPIC backends for KVM will need this, so
encapsulate the shared bits.

Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
2012-01-19 12:14:40 +01:00
Gerd Hoffmann 1de14d43e2 usb: track altsetting in USBDevice
Also handle {GET,SET}_INTERFACE in common code (usb-desc.c).

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2012-01-13 10:25:44 +01:00
Anthony Liguori f3c6a169a3 Merge remote-tracking branch 'qemu-kvm/memory/page_desc' into staging
* qemu-kvm/memory/page_desc: (22 commits)
  Remove cpu_get_physical_page_desc()
  sparc: avoid cpu_get_physical_page_desc()
  virtio-balloon: avoid cpu_get_physical_page_desc()
  vhost: avoid cpu_get_physical_page_desc()
  kvm: avoid cpu_get_physical_page_desc()
  memory: remove CPUPhysMemoryClient
  xen: convert to MemoryListener API
  memory: temporarily add memory_region_get_ram_addr()
  xen, vga: add API for registering the framebuffer
  vhost: convert to MemoryListener API
  kvm: convert to MemoryListener API
  kvm: switch kvm slots to use host virtual address instead of ram_addr_t
  memory: add API for observing updates to the physical memory map
  memory: replace cpu_physical_sync_dirty_bitmap() with a memory API
  framebuffer: drop use of cpu_physical_sync_dirty_bitmap()
  loader: remove calls to cpu_get_physical_page_desc()
  framebuffer: drop use of cpu_get_physical_page_desc()
  memory: introduce memory_region_find()
  memory: add memory_region_is_logging()
  memory: add memory_region_is_rom()
  ...
2012-01-03 14:39:05 -06:00
Avi Kivity 20581d2078 xen: convert to MemoryListener API
Signed-off-by: Avi Kivity <avi@redhat.com>
2012-01-03 19:19:22 +02:00
Aneesh Kumar K.V 2f008a8c97 hw/9pfs: Use the correct signed type for different variables
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
2011-12-21 12:37:23 +05:30
Paolo Bonzini ad54ae80c7 block: bdrv_aio_* do not return NULL
Initially done with the following semantic patch:

@ rule1 @
expression E;
statement S;
@@
  E =
(
   bdrv_aio_readv
|  bdrv_aio_writev
|  bdrv_aio_flush
|  bdrv_aio_discard
|  bdrv_aio_ioctl
)
     (...);
(
- if (E == NULL) { ... }
|
- if (E)
    { <... S ...> }
)

which however missed the occurrence in block/blkverify.c
(as it should have done), and left behind some unused
variables.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-12-15 12:40:07 +01:00
Kevin Wolf c57c465800 dma-helpers: Add trace events
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
2011-12-05 14:51:38 +01:00
Stefan Hajnoczi ab1859218a block: core copy-on-read logic
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-12-05 14:51:38 +01:00
Anthony Liguori 8494a397b6 Merge remote-tracking branch 'kwolf/for-anthony' into staging
Conflicts:
	block/vmdk.c
2011-10-31 11:09:00 -05:00
Aneesh Kumar K.V 7999f7e127 hw/9pfs: Make VirtFS tracing work correctly
this patch fix multiple issues with VirtFS tracing.
a) Add tracepoint to the correct code path. We handle error in complete_pdu
b) Fix indentation in python script
c) Fix variable naming issue in python script

Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-10-30 09:05:28 +00:00
Paolo Bonzini e88c591d63 scsi: do not call transfer_data after canceling a request
Otherwise, if cancellation is "faked" by the AIO layer and goes
through qemu_aio_flush, the whole request is completed synchronously
during scsi_req_cancel.

Using the enqueued flag would work here, but not in the next patches,
so I'm introducing a new io_canceled flag.  That's because scsi_req_data
is a synchronous callback and the enqueued flag might be reset by the
time it returns.  scsi-disk cannot unref the request until after calling
scsi_req_data.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-10-28 19:25:52 +02:00
Ronnie Sahlberg c589b24972 iSCSI block driver
This provides built-in support for iSCSI to QEMU.

This has the advantage that the iSCSI devices need not be made visible to the host, which is useful if you have very many virtual machines and very many iscsi devices.
It also has the benefit that non-root users of QEMU can access iSCSI devices across the network without requiring root privilege on the host.

This driver interfaces with the multiplatform posix library for iscsi initiator/client access to iscsi devices hosted at
    git://github.com/sahlberg/libiscsi.git

The patch adds the driver to interface with the iscsi library.
It also updated the configure script to
* by default, probe is libiscsi is available and if so, build
  qemu against libiscsi.
* --enable-libiscsi
  Force a build against libiscsi. If libiscsi is not available
  the build will fail.
* --disable-libiscsi
  Do not link against libiscsi, even if it is available.

When linked with libiscsi, qemu gains support to access iscsi resources such as disks and cdrom directly, without having to make the devices visible to the host.

You can specify devices using a iscsi url of the form :
iscsi://[<username>[:<password>@]]<host>[:<port]/<target-iqn-name>/<lun>
When using authentication, the password can optionally be set with
LIBISCSI_CHAP_PASSWORD="password" to avoid it showing up in the process list

Signed-off-by: Ronnie Sahlberg <ronniesahlberg@gmail.com>
Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-10-28 19:25:48 +02:00
Blue Swirl 870be6ad57 Sparc: convert win_helper to trace framework
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-10-26 17:19:18 +00:00
Blue Swirl 11e66bca8a Sparc: convert interrupt helpers to trace framework
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-10-26 17:18:58 +00:00
Blue Swirl ec0ceb1759 Sparc: convert mmu_helper to trace framework
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-10-26 17:18:57 +00:00
Paolo Bonzini 4265d620c5 block: add bdrv_co_discard and bdrv_aio_discard support
This similarly adds support for coroutine and asynchronous discard.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-10-21 17:34:13 +02:00
Stefan Weil c76eaf1397 hw/9pfs: Fix broken compilation caused by wrong trace events
Commit c572f23a3e added trace events
with mismatching format string and arguments.

gcc reports these errors:

In file included from trace.c:2:0:
trace.h: In function ‘trace_v9fs_attach’:
trace.h:2850:9: error: too many arguments for format [-Werror=format-extra-args]
trace.h: In function ‘trace_v9fs_wstat’:
trace.h:3039:9: error: too many arguments for format [-Werror=format-extra-args]
trace.h: In function ‘trace_v9fs_mkdir’:
trace.h:3088:9: error: too many arguments for format [-Werror=format-extra-args]
trace.h: In function ‘trace_v9fs_mkdir_return’:
trace.h:3095:9: error: too many arguments for format [-Werror=format-extra-args]

Fix the format strings and also use %u instead of %d for unsigned values
in the changed strings. There are more minor errors of this kind
which I did not fix because that would make the review more difficult.

v2: Fixed position of } for v9fs_mkdir_return.

Cc: Harsh Prateek Bora <harsh@linux.vnet.ibm.com>
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-10-20 15:30:59 -05:00
Anthony Liguori 1f99b94932 Merge remote-tracking branch 'aneesh/for-upstream-6' into staging
Conflicts:
	trace-events
2011-10-20 08:42:08 -05:00
Max Filippov 342407fd95 hw: add OpenCores 10/100 Mbps Ethernet controller
This is OpenCores Ethernet MAC + subset of National Semiconductors
DP83838C PHY.
OpenCores Ethernet MAC project: http://opencores.org/project,ethmac

Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-10-16 10:42:20 +00:00