Needed for Power ISA version 2.05 compliance.
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Alexander Graf <agraf@suse.de>
fabs, fnabs and fneg are just flipping the bit sign of an FP register,
this can be implemented in TCG instead of using softfloat.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Alexander Graf <agraf@suse.de>
The PowerPC 620 was the very first 64-bit PowerPC implementation, but
hardly anyone ever actually used the chips. qemu notionally supports the
620, but since we don't actually have code to implement the segment table,
the support is broken (quite likely in other ways too).
This patch, therefore, removes all remaining pieces of 620 support, to
stop it cluttering up the platforms we actually care about. This includes
removing support for the ASR register, used only on segment table based
machines.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alexander Graf <agraf@suse.de>
The bit that makes a dcbz instruction a dcbzl instruction was declared as
reserved in ppc32 ISAs. However, hardware simply ignores the bit, making
code valid if it simply invokes dcbzl instead of dcbz even on 750 and G4.
Thus, mark the bit as unreserved so that we properly emulate a simple dcbz
in case we're running on non-G5s.
While at it, also refactor the code to check the 970 special case during
runtime. This way we don't need to differenciate between a 970 dcbz and
any other dcbz anymore. We also allow for future improvements to add e500mc
dcbz handling.
Reported-by: Amadeusz Sławiński <amade@asmblr.net>
Signed-off-by: Alexander Graf <agraf@suse.de>
We already used to support the external proxy facility of FSL MPICs,
but only implemented it halfway correctly.
This patch adds support for
* dynamic enablement of the EPR facility
* interrupt acknowledgement only when the interrupt is delivered
This way the implementation now is closer to real hardware.
Signed-off-by: Alexander Graf <agraf@suse.de>
Rename helper flags to the new ones. This is purely a mechanical change,
it's possible to use better flags by looking at the helpers.
Cc: Alexander Graf <agraf@suse.de>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
On the e500 series, accessing SPR_EPR magically turns into an access at
that CPU's IACK register on the MPIC. Implement that logic to get kernels
that make use of that feature work.
Signed-off-by: Alexander Graf <agraf@suse.de>
Add an explicit CPUPPCState parameter instead of relying on AREG0
and rename op_helper.c (which only contains load and store helpers)
to mem_helper.c. Remove AREG0 swapping in
tlb_fill().
Switch to AREG0 free mode. Use cpu_ld{l,uw}_code in translation
and interrupt handling, cpu_{ld,st}{l,uw}_data in loads and stores.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
Add an explicit CPUPPCState parameter instead of relying on AREG0.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
Add an explicit CPUPPCState parameter instead of relying on AREG0.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
Add an explicit CPUPPCState parameter instead of relying on AREG0.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
Add an explicit CPUPPCState parameter instead of relying on AREG0.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Andreas Färber <afaerber@suse.de>
[fix unwanted whitespace line in Makefile.target]
Signed-off-by: Alexander Graf <agraf@suse.de>
Add an explicit CPUPPCState parameter instead of relying on AREG0.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
Add an explicit CPUPPCState parameter instead of relying on AREG0.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
This patch implements the msgsnd instruction. It is part of the
Embedded.Processor Control specification and allows one CPU to
IPI another CPU without going through an interrupt controller.
Signed-off-by: Alexander Graf <agraf@suse.de>
This patch implements the msgclr instruction. It is part of the
Embedded.Processor Control specification and clears pending doorbell
interrupts on the current CPU.
Signed-off-by: Alexander Graf <agraf@suse.de>
The PowerPC 2.06 BookE ISA defines an opcode called "tlbilx" which is used
to flush TLB entries. It's the recommended way of flushing in virtualized
environments.
So far we got away without implementing it, but Linux for e500mc uses this
instruction, so we better add it :).
Signed-off-by: Alexander Graf <agraf@suse.de>
target-ppc has been switched to softfloat only long ago, but a
few #ifdef CONFIG_SOFTFLOAT have been forgotten. Remove them.
Cc: Alexander Graf <agraf@suse.de>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Most of the code to support e500 style MMUs is already in place, but
we're missing on some of the special TLB0-TLB1 handling code and slightly
different TLB modification.
This patch adds support for the FSL style MMU.
Signed-off-by: Alexander Graf <agraf@suse.de>
qemu already includes support for the popcntb instruction introduced
in POWER5 (although it doesn't actually allow you to choose POWER5).
However, the logic is slightly incorrect: it will generate results
truncated to 32-bits when the CPU is in 32-bit mode. This is not
normal for powerpc - generally arithmetic instructions on a 64-bit
powerpc cpu will generate full 64 bit results, it's just that only the
low 32 bits will be significant for condition codes.
This patch corrects this nit, which actually simplifies the code slightly.
In addition, this patch implements the popcntw and popcntd
instructions added in POWER7, in preparation for allowing POWER7 as an
emulated CPU.
Signed-off-by: David Gibson <dwg@au1.ibm.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
The PURR (Processor Utilization Resource Register) is a register found
on recent POWER CPUs. The guts of implementing it at least enough to
get by are already present in qemu, however some of the helper
functions needed to actually wire it up are missing.
This patch adds the necessary glue, so that the PURR can be wired up
when we implement newer POWER CPU targets which include it.
Signed-off-by: David Gibson <dwg@au1.ibm.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
For a 64-bit PowerPC target, qemu correctly implements translation
through the segment lookaside buffer. Likewise it supports the
slbmte instruction which is used to load entries into the SLB.
However, it does not emulate the slbmfee and slbmfev instructions
which read SLB entries back into registers. Because these are
only occasionally used in guests (mostly for debugging) we get
away with it.
However, given the recent SLB cleanups, it becomes quite easy to
implement these, and thereby allow, amongst other things, a guest
Linux to use xmon's command to dump the SLB.
Signed-off-by: David Gibson <dwg@au1.ibm.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Currently the SLB information when emulating a PowerPC 970 is
storeed in a structure with the unhelpfully named fields 'tmp'
and 'tmp64'. While the layout in these fields does match the
description of the SLB in the architecture document, it is not
convenient either for looking up the SLB, or for emulating the
slbmte instruction.
This patch, therefore, reorganizes the SLB entry structure to be
divided in the the "ESID related" and "VSID related" fields as
they are divided in instructions accessing the SLB.
In addition to making the code smaller and more readable, this will
make it easier to implement for the 1TB segments used in more
recent PowerPC chips.
Signed-off-by: David Gibson <dwg@au1.ibm.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Some hosts (amd64, ia64) have an ABI that ignores the high bits
of the 64-bit register when passing 32-bit arguments. Others
require the value to be properly sign-extended for the type.
I.e. "int32_t" must be sign-extended and "uint32_t" must be
zero-extended to 64-bits.
To effect this, extend the "sizemask" parameter to tcg_gen_callN
to include the signedness of the type of each parameter. If the
tcg target requires it, extend each 32-bit argument into a 64-bit
temp and pass that to the function call.
This ABI feature is required by sparc64, ppc64 and s390x.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
The recent transition to always have the DCR helper functions take 32 bit
values broke the PPC64 target, as target_long became 64 bits there.
This patch changes DCR helpers to target_long arguments, and cast the values
to 32 bit when needed.
Fixes PPC64 build with --enable-debug-tcg
Based on a patch from Alexander Graf <agraf@suse.de>
Reported-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
For what I know DCR is always 32 bits wide, so we should also use uint32_t to
pass it along the stacks.
This fixes a warning when compiling qemu-system-ppc64 with KVM enabled, making
it compile without --disable-werror
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
In the very least, a change like this requires discussion on the list.
The naming convention is goofy and it causes a massive merge problem. Something
like this _must_ be presented on the list first so people can provide input
and cope with it.
This reverts commit 99a0949b72.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Do this so we can set float statuses once per mtvscr, rather than once
per Altivec instruction.
Signed-off-by: Nathan Froyd <froydnj@codesourcery.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6508 c046a42c-6fe2-441c-8c8c-71466251a162
