Some files contain multiple #includes of the same header file.
Removed most of those unnecessary duplicate entries using
scripts/clean-includes.
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Anand J <anand.indukala@gmail.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
No need to keep explicit_fe_open around if it affects only a
qemu_chr_fe_set_handlers(). Use an additional argument instead.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20161022095318.17775-24-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Now that all front end use qemu_chr_fe_init(), we can move chardev
claiming in init(), and add a function deinit() to release the chardev
and cleanup handlers.
The qemu_chr_fe_claim_no_fail() for property are gone, since the
property will raise an error instead. In other cases, where there is
already an error path, an error is raised instead. Finally, other cases
are handled by &error_abort in qemu_chr_fe_init().
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20161022095318.17775-19-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This also switches from qemu_chr_add_handlers() to
qemu_chr_fe_set_handlers(). Note that qemu_chr_fe_set_handlers() now
takes the focus when fe_open (qemu_chr_add_handlers() did take the
focus)
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20161022095318.17775-16-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Similar to previous change, for the remaining CharDriverState front ends
users.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20161022095318.17775-13-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The CharDriverState.init() callback is no longer set since commit
a61ae7f88c and thus unused. The only user, the malta FGPA display has
been converted to use an event "opened" callback instead.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20161022095318.17775-7-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The qemu_chr_fe_write method will return -1 on EAGAIN if the
chardev backend write would block. Almost no callers of the
qemu_chr_fe_write() method check the return value, instead
blindly assuming data was successfully sent. In most cases
this will lead to silent data loss on interactive consoles,
but in some cases (eg RNG EGD) it'll just cause corruption
of the protocol being spoken.
We unfortunately can't fix the virtio-console code, due to
a bug in the Linux guest drivers, which would cause the
entire Linux kernel to hang if we delay processing of the
incoming data in any way. Fixing this requires first fixing
the guest driver to not hold spinlocks while writing to the
hvc device backend.
Fixes bug: https://bugs.launchpad.net/qemu/+bug/1586756
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-Id: <1473170165-540-4-git-send-email-berrange@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=AXqa
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/riku/tags/pull-linux-user-20160608' into staging
linux-user pull request for June 2016
# gpg: Signature made Wed 08 Jun 2016 14:27:14 BST
# gpg: using RSA key 0xB44890DEDE3C9BC0
# gpg: Good signature from "Riku Voipio <riku.voipio@iki.fi>"
# gpg: aka "Riku Voipio <riku.voipio@linaro.org>"
* remotes/riku/tags/pull-linux-user-20160608: (44 commits)
linux-user: In fork_end(), remove correct CPUs from CPU list
linux-user: Special-case ERESTARTSYS in target_strerror()
linux-user: Make target_strerror() return 'const char *'
linux-user: Correct signedness of target_flock l_start and l_len fields
linux-user: Use safe_syscall wrapper for ioctl
linux-user: Use safe_syscall wrapper for accept and accept4 syscalls
linux-user: Use safe_syscall wrapper for semop
linux-user: Use safe_syscall wrapper for epoll_wait syscalls
linux-user: Use safe_syscall wrapper for poll and ppoll syscalls
linux-user: Use safe_syscall wrapper for sleep syscalls
linux-user: Use safe_syscall wrapper for rt_sigtimedwait syscall
linux-user: Use safe_syscall wrapper for flock
linux-user: Use safe_syscall wrapper for mq_timedsend and mq_timedreceive
linux-user: Use safe_syscall wrapper for msgsnd and msgrcv
linux-user: Use safe_syscall wrapper for send* and recv* syscalls
linux-user: Use safe_syscall wrapper for connect syscall
linux-user: Use safe_syscall wrapper for readv and writev syscalls
linux-user: Fix error conversion in 64-bit fadvise syscall
linux-user: Fix NR_fadvise64 and NR_fadvise64_64 for 32-bit guests
linux-user: Fix handling of arm_fadvise64_64 syscall
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Conflicts:
configure
scripts/qemu-binfmt-conf.sh
Avoid possible connection drops on Linux (when tcp_syncookies is
disabled) or fallbacks to SYN cookies with the following kernel warning:
TCP: request_sock_TCP: Possible SYN flooding on port 1234. Sending cookies. Check SNMP counters.
Since Linux 4.4 (ef547f2ac16b "tcp: remove max_qlen_log"), a backlog of
zero is really treated as the "queue length for completely established
sockets waiting to be accepted" (listen(2)). This is apparently a valid
interpretation of an "implementation-defined minimum value" for a
backlog value of 0 (listen(3p)). Previous kernels would use 8 as
minimum value, but that is no longer the case.
Signed-off-by: Peter Wu <peter@lekensteyn.nl>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
While waiting for a gdb response, or while sending an acknowledgement
there is not much to do, so do not mark the socket as non-blocking to
avoid a busy loop while paused at gdb. This only affects the user-mode
emulation (qemu-arm -g 1234 ./a.out).
Note that this issue was reported before at
https://lists.nongnu.org/archive/html/qemu-devel/2013-02/msg02277.html.
While at it, close the gdb client fd on EOF or error while reading.
Signed-off-by: Peter Wu <peter@lekensteyn.nl>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
exec-all.h contains TCG-specific definitions. It is not needed outside
TCG-specific files such as translate.c, exec.c or *helper.c.
One generic function had snuck into include/exec/exec-all.h; move it to
include/qom/cpu.h.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Move declarations out of qemu-common.h for functions declared in
utils/ files: e.g. include/qemu/path.h for utils/path.c.
Move inline functions out of qemu-common.h and into new files (e.g.
include/qemu/bcd.h)
Signed-off-by: Veronia Bahaa <veroniabahaa@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Commit 57cb38b included qapi/error.h into qemu/osdep.h to get the
Error typedef. Since then, we've moved to include qemu/osdep.h
everywhere. Its file comment explains: "To avoid getting into
possible circular include dependencies, this file should not include
any other QEMU headers, with the exceptions of config-host.h,
compiler.h, os-posix.h and os-win32.h, all of which are doing a
similar job to this file and are under similar constraints."
qapi/error.h doesn't do a similar job, and it doesn't adhere to
similar constraints: it includes qapi-types.h. That's in excess of
100KiB of crap most .c files don't actually need.
Add the typedef to qemu/typedefs.h, and include that instead of
qapi/error.h. Include qapi/error.h in .c files that need it and don't
get it now. Include qapi-types.h in qom/object.h for uint16List.
Update scripts/clean-includes accordingly. Update it further to match
reality: replace config.h by config-target.h, add sysemu/os-posix.h,
sysemu/os-win32.h. Update the list of includes in the qemu/osdep.h
comment quoted above similarly.
This reduces the number of objects depending on qapi/error.h from "all
of them" to less than a third. Unfortunately, the number depending on
qapi-types.h shrinks only a little. More work is needed for that one.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
[Fix compilation without the spice devel packages. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This patch implements record and replay of character devices.
It records chardevs communication in replay mode. Recorded information
include data read from backend and counter of bytes written
from frontend to backend to preserve frontend internal state.
If character device was configured through the command line in record mode,
then in replay mode it should be also added to command line. Backend of
the character device could be changed in replay mode.
Replaying of devices that perform ioctl and get_msgfd operations is not
supported.
gdbstub which also acts as a backend is not recorded to allow controlling
the replaying through gdb. Monitor backends are also not recorded.
Signed-off-by: Pavel Dovgalyuk <pavel.dovgaluk@ispras.ru>
Message-Id: <20160314074436.4980.83856.stgit@PASHA-ISP>
[Add stubs. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Clean up includes so that osdep.h is included first and headers
which it implies are not included manually.
This commit was created with scripts/clean-includes.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1454089805-5470-16-git-send-email-peter.maydell@linaro.org
This patch provides the name of the architecture in the target.xml
if available.
This allows the remote gdb to detect the target architecture on its
own - so there is no need to specify it manually (e.g. if gdb is
started without a binary) using "set arch *arch_name*".
The name of the architecture is provided by a callback that can
be implemented by all architectures. The arm implementation has
special handling for iwmmxt and returns arm otherwise. This can
be extended if necessary.
Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
[rework to use a callback]
Message-Id: <1449144881-130935-1-git-send-email-borntraeger@de.ibm.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Typically a UNIX guest OS will log boot messages to a serial
port in addition to any graphical console. An admin user
may also wish to use the serial port for an interactive
console. A virtualization management system may wish to
collect system boot messages by logging the serial port,
but also wish to allow admins interactive access.
Currently providing such a feature forces the mgmt app
to either provide 2 separate serial ports, one for
logging boot messages and one for interactive console
login, or to proxy all output via a separate service
that can multiplex the two needs onto one serial port.
While both are valid approaches, they each have their
own downsides. The former causes confusion and extra
setup work for VM admins creating disk images. The latter
places an extra burden to re-implement much of the QEMU
chardev backends logic in libvirt or even higher level
mgmt apps and adds extra hops in the data transfer path.
A simpler approach that is satisfactory for many use
cases is to allow the QEMU chardev backends to have a
"logfile" property associated with them.
$QEMU -chardev socket,host=localhost,port=9000,\
server=on,nowait,id-charserial0,\
logfile=/var/log/libvirt/qemu/test-serial0.log
-device isa-serial,chardev=charserial0,id=serial0
This patch introduces a 'ChardevCommon' struct which
is setup as a base for all the ChardevBackend types.
Ideally this would be registered directly as a base
against ChardevBackend, rather than each type, but
the QAPI generator doesn't allow that since the
ChardevBackend is a non-discriminated union. The
ChardevCommon struct provides the optional 'logfile'
parameter, as well as 'logappend' which controls
whether QEMU truncates or appends (default truncate).
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-Id: <1452516281-27519-1-git-send-email-berrange@redhat.com>
[Call qemu_chr_parse_common if cd->parse is NULL. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Some places in gdb_handle_packet() can get an arbitrary length (most
times directly from the client) and either didn't check it at all or
checked against the wrong value, potentially causing buffer overflows.
Cc: qemu-stable@nongnu.org
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
* qemu_mutex_lock_iothread "No such process" fix
* cutils: qemu_strto* wrappers
* iohandler.c simplification
* Many other fixes and misc patches.
And some MTTCG work (with Emilio's fixes squashed):
* Signal-free TCG kick
* Removing spinlock in favor of QemuMutex
* User-mode emulation multi-threading fixes/docs
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2
iQEcBAABCAAGBQJV8Tk7AAoJEL/70l94x66Ds3QH/3bi0RRR2NtKIXAQrGo5tfuD
NPMu1K5Hy+/26AC6mEVNRh4kh7dPH5E4NnDGbxet1+osvmpjxAjc2JrxEybhHD0j
fkpzqynuBN6cA2Gu5GUNoKzxxTmi2RrEYigWDZqCftRXBeO2Hsr1etxJh9UoZw5H
dgpU3j/n0Q8s08jUJ1o789knZI/ckwL4oXK4u2KhSC7ZTCWhJT7Qr7c0JmiKReaF
JEYAsKkQhICVKRVmC8NxML8U58O8maBjQ62UN6nQpVaQd0Yo/6cstFTZsRrHMHL3
7A2Tyg862cMvp+1DOX3Bk02yXA+nxnzLF8kUe0rYo6llqDBDStzqyn1j9R0qeqA=
=nB06
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into staging
* Support for jemalloc
* qemu_mutex_lock_iothread "No such process" fix
* cutils: qemu_strto* wrappers
* iohandler.c simplification
* Many other fixes and misc patches.
And some MTTCG work (with Emilio's fixes squashed):
* Signal-free TCG kick
* Removing spinlock in favor of QemuMutex
* User-mode emulation multi-threading fixes/docs
# gpg: Signature made Thu 10 Sep 2015 09:03:07 BST using RSA key ID 78C7AE83
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>"
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>"
* remotes/bonzini/tags/for-upstream: (44 commits)
cutils: work around platform differences in strto{l,ul,ll,ull}
cpu-exec: fix lock hierarchy for user-mode emulation
exec: make mmap_lock/mmap_unlock globally available
tcg: comment on which functions have to be called with mmap_lock held
tcg: add memory barriers in page_find_alloc accesses
remove unused spinlock.
replace spinlock by QemuMutex.
cpus: remove tcg_halt_cond and tcg_cpu_thread globals
cpus: protect work list with work_mutex
scripts/dump-guest-memory.py: fix after RAMBlock change
configure: Add support for jemalloc
add macro file for coccinelle
configure: factor out adding disas configure
vhost-scsi: fix wrong vhost-scsi firmware path
checkpatch: remove tests that are not relevant outside the kernel
checkpatch: adapt some tests to QEMU
CODING_STYLE: update mixed declaration rules
qmp: Add example usage of strto*l() qemu wrapper
cutils: Add qemu_strtoull() wrapper
cutils: Add qemu_strtoll() wrapper
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Use the same API to trigger interruption of a CPU, no matter if
under TCG or KVM. There is no difference: these calls come from
the CPU thread, so the qemu_cpu_kick calls will send a signal
to the running thread and it will be processed synchronously,
just like a call to cpu_exit. The only difference is in the
overhead, but neither call to cpu_exit (now qemu_cpu_kick)
is in a hot path.
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Implement a variant of the existing gdb_do_syscall() which
takes a va_list.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Tested-by: Christopher Covington <cov@codeaurora.org>
Message-id: 1439483745-28752-4-git-send-email-peter.maydell@linaro.org
gdb expects that the thread ID for c and g-class operations is set to
the CPU we provide when reporting VM stop conditions. If the stub is
still tuned to a different CPU, the wrong information is delivered to
the gdb frontend.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Use the cpu_set_pc() helper which will take care of CPUClass retrieval
for us.
Signed-off-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
All callsites to this function navigate the cpu->env_ptr only for the
function to take the env ptr back to the original cpu ptr. Change the
function to just pass in the CPU pointer instead. Removes a core code
usage of ENV_GET_CPU() (in gdbstub.c).
Cc: Riku Voipio <riku.voipio@iki.fi>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
All of the core-code usages of this API have the cpu pointer handy so
pass it in. There are only 3 architecture specific usages (2 of which
are commented out) which can just use ENV_GET_CPU() locally to get the
cpu pointer. The reduces core code usage of the CPU env, which brings
us closer to common-obj'ing these core files.
Cc: Riku Voipio <riku.voipio@iki.fi>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Acked-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Remove semihosting_enabled and semihosting_target and replace them with
SemihostingConfig structure containing equivalent fields. The structure
is defined in vl.c where it is actually set.
Also introduce separate header file include/exec/semihost.h allowing to
access semihosting config related stuff from target specific semihosting
code.
Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1434643256-16858-2-git-send-email-leon.alrae@imgtec.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The requirements described in this patch are implemented by "Add GDB
qAttached support".
This reverts commit 00e94dbc7f.
Signed-off-by: Fabien Chouteau <chouteau@adacore.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
With this patch QEMU handles qAttached request from gdb. When QEMU
replies 1, GDB sends a "detach" command at the end of a debugging
session otherwise GDB sends "kill".
The default value for qAttached is 1 on system emulation and 0 on user
emulation.
Based on original version by Fabien Chouteau.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This helper supports parsing of query packets with optional extensions.
The separator can be specified so that we can use it already for both
qqemu.sstep[=] and qSupported[:feature].
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
qOffsets has no additional optional parameters. So match the complete
string to avoid stumbling over possible future commands with identical
prefix.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Coverity reports that s->chr is checked after put_packet dereferences it.
Move the check earlier, consistent with the code used for user-mode
emulation.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
The usual semihosting behaviour is to process the system calls locally and
return; unfortuantelly the initial implementation dinamically changed the
target to GDB during debug sessions, which, for the usual arm-none-eabi-gdb,
is not implemented. The result was that during debug sessions the semihosting
calls were discarded.
This patch adds a configuration variable and an option to set it on the
command line:
-semihosting-config [enable=on|off,]target=native|gdb|auto
This option enables semihosting and defines where the semihosting calls will
be addressed, to QEMU ('native') or to GDB ('gdb'). The default is auto, which
means 'gdb' during debug sessions and 'native' otherwise.
Signed-off-by: Liviu Ionescu <ilg@livius.net>
Message-id: 1416341957-9796-1-git-send-email-ilg@livius.net
[PMM: moved declaration and definition of semihosting_target to
gdbstub.h and gdbstub.c to fix build failure on linux-user]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
While using qemu with gdb "target remote" to debug an application that uses
fork and exec, the qemu process receives SIGSTOP every time the forked process
terminates (sending SIGCHLD).
This is caused by a missing call to gdb_signal_to_target in gdbstub.c, which
is fixed by this patch:
Signed-off-by: Martin Simmons <martin@lispworks.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
GDB assumes that watchpoint set via the gdbstub remote protocol will
behave in the same way as hardware watchpoints for the target. In
particular, whether the CPU stops with the PC before or after the insn
which triggers the watchpoint is target dependent. Allow guest CPU
code to specify which behaviour to use. This fixes a bug where with
guest CPUs which stop before the accessing insn GDB would manually
step forward over what it thought was the insn and end up one insn
further forward than it should be.
We set this flag for the CPU architectures which set
gdbarch_have_nonsteppable_watchpoint in gdb 7.7:
ARM, CRIS, LM32, MIPS and Xtensa.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Tested-by: Max Filippov <jcmvbkbc@gmail.com>
Tested-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Tested-by: Michael Walle <michael@walle.cc> (for lm32)
Message-id: 1410545057-14014-1-git-send-email-peter.maydell@linaro.org
This patch initializes monitor for gdbstub with the qemu_chr_alloc function
instead of just allocating the memory. Initialization function call
is required, because it also creates chr_write_lock mutex, which is used
when writing to this character device.
Signed-off-by: Pavel Dovgalyuk <Pavel.Dovgaluk@ispras.ru>
Cc: qemu-stable@nongnu.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
After reporting the GUEST_PANICKED monitor event, QEMU stops the VM.
The reason for this is that events are edge-triggered, and can be lost if
management dies at the wrong time. Stopping a panicked VM lets management
know of a panic even if it has crashed; management can learn about the
panic when it restarts and queries running QEMU processes. The downside
is of course that the VM will be paused while management is not running,
but that is acceptable if it only happens with explicit "-device pvpanic".
Upon learning of a panic, management (if configured to do so) can pick a
variety of behaviors: leave the VM paused, reset it, destroy it. In
addition to all of these behaviors, it is possible to dump the VM core
from the host.
However, right now, the panicked state is irreversible, and can only be
exited by resetting the machine. This means that any policy decision
is entirely in the hands of the host. In particular there is no way to
use the "reboot on panic" option together with pvpanic.
This patch makes the panicked state reversible (and removes various
workarounds that were there because of the state being irreversible).
With this change, management has a wider set of possible policies: it
can just log the crash and leave policy to the guest, it can leave the
VM paused. In particular, the "log the crash and continue" is implemented
simply by sending a "cont" as soon as management learns about the panic.
Management could also implement the "irreversible paused state" itself.
And again, all such actions can be coupled with dumping the VM core.
Unfortunately we cannot change the behavior of 1.6.0. Thus, even if
it uses "-device pvpanic", management should check for "cont" failures.
If "cont" fails, management can then log that the VM remained paused
and urge the administrator to update QEMU.
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
SO_REUSEADDR should be avoided on Windows but is desired on other operating
systems. So instead of setting it we call socket_set_fast_reuse that will result
in the appropriate behaviour on all operating systems.
Signed-off-by: Sebastian Ottlik <ottlik@fzi.de>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Commit a0e372f0c4 reorganized the register
counting for GDB. While it seems correct not to let the total number of
registers skyrocket in an SMP scenario through a static variable, the
distinction between total register count and 'g' packet register count
(last_reg vs. num_g_regs) got lost among the way.
Fix this by introducing CPUState::gdb_num_g_regs and using that in
gdb_handle_packet().
Reported-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Cc: qemu-stable@nongnu.org (stable-1.6)
Tested-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Tested-by: Max Filippov <jcmvbkbc@gmail.com>
Tested-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Replace the GDB_CORE_XML define in gdbstub.c with a CPUClass field.
Use first_cpu for qSupported and qXfer:features:read: for now.
Add a stub for xml_builtin.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Completes migration of target-specific code to new target-*/gdbstub.c.
Acked-by: Michael Walle <michael@walle.cc> (for lm32)
Acked-by: Max Filippov <jcmvbkbc@gmail.com> (for xtensa)
Signed-off-by: Andreas Färber <afaerber@suse.de>
This avoids polluting the global namespace with a non-prefixed macro and
makes it obvious in the call sites that we return.
Semi-automatic conversion using, e.g.,
sed -i 's/GET_REGL(/return gdb_get_regl(mem_buf, /g' target-*/gdbstub.c
followed by manual tweaking for sparc's GET_REGA() and Coding Style.
Acked-by: Michael Walle <michael@walle.cc> (for lm32)
Acked-by: Max Filippov <jcmvbkbc@gmail.com> (for xtensa)
Signed-off-by: Andreas Färber <afaerber@suse.de>
CPUState::gdb_num_regs replaces num_g_regs.
CPUClass::gdb_num_core_regs replaces NUM_CORE_REGS.
Allows building gdb_register_coprocessor() for xtensa, too.
As a side effect this should fix coprocessor register numbering for SMP.
Acked-by: Michael Walle <michael@walle.cc> (for lm32)
Acked-by: Max Filippov <jcmvbkbc@gmail.com> (for xtensa)
Signed-off-by: Andreas Färber <afaerber@suse.de>
GET_REG*() macros include a return statement, thus no need for break.
Acked-by: Michael Walle <michael@walle.cc> (for lm32)
Signed-off-by: Andreas Färber <afaerber@suse.de>
Add braces, replace tabs, remove trailing whitespace, drop space before
parenthesis and place break etc. below case statements.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Make inline target_memory_rw_debug() always available and change its
argument to CPUState. Let it check if CPUClass::memory_rw_debug provides
a specialized callback and fall back to cpu_memory_rw_debug() otherwise.
The only overriding implementation is for 32-bit sparc.
This prepares for changing GDBState::g_cpu to CPUState.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Callback implementations were specific to arm and m68k, so can easily
cast to ARMCPU and M68kCPU respectively.
Prepares for changing GDBState::c_cpu to CPUState.
Signed-off-by: Andreas Färber <afaerber@suse.de>
CPUArchState is no longer directly used since converting CPU loops to
CPUState.
Prepares for changing GDBState::c_cpu to CPUState.
Signed-off-by: Andreas Färber <afaerber@suse.de>
In particular reindent to 4 instead of 2 spaces.
Prepares for changing cpu_single_step() argument in gdb_handlesig().
Signed-off-by: Andreas Färber <afaerber@suse.de>
This moves setting the Program Counter from gdbstub into target code.
Use vaddr type as upper-bound replacement for target_ulong.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Since first_cpu/next_cpu are CPUState, CPUArchState is no longer needed.
This resolves a NULL pointer dereference of query_cpu, introduced
with commit 182735efaf and reported by
TeLeMan and Max Filippov.
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Move next_cpu from CPU_COMMON to CPUState.
Move first_cpu variable to qom/cpu.h.
gdbstub needs to use CPUState::env_ptr for now.
cpu_copy() no longer needs to save and restore cpu_next.
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
[AF: Rebased, simplified cpu_copy()]
Signed-off-by: Andreas Färber <afaerber@suse.de>
This reverts commit c52a6b67c1, which
replaced cpu_index() with cpu_index field, leading to deviation from
thread ID for NTPL and off-by-one otherwise.
Reported-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Use CPUState::env_ptr for now.
Prepares for changing cpu_handle_guest_debug() argument to CPUState.
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Andreas Färber <afaerber@suse.de>
It no longer depends on CPUArchState, so move it to qom/cpu.c.
Prepares for changing GDBState::c_cpu to CPUState.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Change Monitor::mon_cpu to CPUState as well.
Reviewed-by: liguang <lig.fnst@cn.fujitsu.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
While in general we forbid a "continue" from the guest panicked
state, it makes sense to have an exception for that when continuing
in the debugger. Perhaps the guest entered that state due to a bug,
for example, and we want to continue no matter what.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
Message-id: 1370272015-9659-3-git-send-email-pbonzini@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This commit used the wrong check to prevent an assertion failure.
After this commit, you need to start a guest in the monitor, you
cannot use anymore the "c" command in the debugger. This is
undesirable. The commit's aim was to prevent a restart
after a KVM internal error or something like that; use
runstate_needs_reset() for that.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
Message-id: 1370272015-9659-2-git-send-email-pbonzini@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
If a guest has crashed with an internal error or similar, detaching
gdb (or any other debugger action) should not restart it.
Cc: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Message-id: 1369912840-18577-1-git-send-email-pbonzini@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Many of these should be cleaned up with proper qdev-/QOM-ification.
Right now there are many catch-all headers in include/hw/ARCH depending
on cpu.h, and this makes it necessary to compile these files per-target.
However, fixing this does not belong in these patches.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
chardev-frontends need to explictly check, increase and decrement the
avail_connections "property" of the chardev when they are not using a
qdev-chardev-property for the chardev.
This fixes things like:
qemu-kvm -chardev stdio,id=foo -device isa-serial,chardev=foo \
-mon chardev=foo
Working, where they should fail. Most of the changes here are due to
old hardware emulation code which is using serial_hds directly rather then
a qdev-chardev-property.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Message-id: 1364412581-3672-3-git-send-email-hdegoede@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
* 'ppc-for-upstream' of git://github.com/agraf/qemu: (58 commits)
target-ppc: Use NARROW_MODE macro for tlbie
target-ppc: Use NARROW_MODE macro for addresses
target-ppc: Use NARROW_MODE macro for comparisons
target-ppc: Use NARROW_MODE macro for branches
target-ppc: Fix add and subf carry generation in narrow mode
target-ppc: Use QOM method dispatch for MMU fault handling
target-ppc: Move ppc tlb_fill implementation into mmu_helper.c
target-ppc: Split user only code out of mmu_helper.c
mmu-hash64: Implement Virtual Page Class Key Protection
mmu-hash*: Merge translate and fault handling functions
mmu-hash*: Don't use full ppc_hash{32, 64}_translate() path for get_phys_page_debug()
mmu-hash*: Correctly mask RPN from hash PTE
mmu-hash*: Clean up real address calculation
mmu-hash*: Clean up PTE flags update
mmu-hash64: Factor SLB N bit into permissions bits
mmu-hash*: Clean up permission checking
mmu-hash32: Remove nx from context structure
mmu-hash*: Don't update PTE flags when permission is denied
mmu-hash32: Don't look up page tables on BAT permission error
mmu-hash32: Cleanup BAT lookup
...
Although the support of this register may be uncomplete, there are no
reason to prevent the debugger from reading or writing it.
Signed-off-by: Fabien Chouteau <chouteau@adacore.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Instead of adding missing type casts which are needed by MinGW for the
4th argument, the patch uses qemu_setsockopt which was invented for this
purpose.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Both fields are used in VMState, thus need to be moved together.
Explicitly zero them on reset since they were located before
breakpoints.
Pass PowerPCCPU to kvmppc_handle_halt().
Signed-off-by: Andreas Färber <afaerber@suse.de>
Note that target-alpha accesses this field from TCG, now using a
negative offset. Therefore the field is placed last in CPUState.
Pass PowerPCCPU to [kvm]ppc_fixup_cpu() to facilitate this change.
Move common parts of mips cpu_state_reset() to mips_cpu_reset().
Acked-by: Richard Henderson <rth@twiddle.net> (for alpha)
[AF: Rebased onto ppc CPU subclasses and openpic changes]
Signed-off-by: Andreas Färber <afaerber@suse.de>
The real gdb protocol doesn't split out pc or cc as real registers.
Those are pseudos that are extracted as needed from the PSW. Don't
modify env->cc_op during read -- that way lies heisenbugs.
Fill in the XXX for the fp registers.
Remove duplicated defines in cpu.h.
Signed-off-by: Richard Henderson <rth@twiddle.net>
There are 16 32-bit FP registers (f0 - f15), control and status user
registers (fcr, fsr).
See ISA, 4.3.10 for more details.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
We have to use different type to access float values when
USE_SOFTFLOAT_STRUCT_TYPES is defined.
Rework SH4 version of cpu_gdb_{read,write}_register() using
a single case, and fixing the coding style. Use ldll_p() and
stfl_p() to access float values.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
The following patch also needs this API, so make it generally avialable.
The function gdb_id() will not be used in gdbstub.c now, so its name is
not suitable, and rename it to cpu_index()
Signed-off-by: Wen Congyang <wency@cn.fujitsu.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Synchronize the CPU state via cpu_sychronize_state() unconditionally
in gdb_set_cpu_pc() rather than only in some of the target ifdef
ladder cases.
We can divide the CPUs into three categories:
* non-KVM targets: no change of behaviour since we will use the
kvm-stub.c no-op function.
* i386 and s390: no change of behaviour since they were already
calling this function
* PPC (in KVM mode): this fixes an error: failing to synchronise
was accidental and probably a bug.
This also paves the way for other targets (specifically ARM) which
can add KVM support in future without having to add another target
specific change to this bit of code.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Fix an issue where the GDB server implementation was sending GDB syscall
requests while the system CPU was still running. Syscall requests must
be sent while the CPU is stopped otherwise replies from the GDB client
might get dropped and the GDB server might be incorrectly transitioned
into a 'RUN_STATE_PAUSED' state.
Signed-off-by: Meador Inge <meadori@codesourcery.com>
[PMM: trivial rebase, reinstated comma after last item in RSState enum]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Scripted conversion:
for file in *.[hc] hw/*.[hc] hw/kvm/*.[hc] linux-user/*.[hc] linux-user/m68k/*.[hc] bsd-user/*.[hc] darwin-user/*.[hc] tcg/*/*.[hc] target-*/cpu.h; do
sed -i "s/CPUState/CPUArchState/g" $file
done
All occurrences of CPUArchState are expected to be replaced by QOM CPUState,
once all targets are QOM'ified and common fields have been extracted.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
Too many VM kittens were killed since 7d03f82f81. Another one just died
under my fat fingers.
When you quit a kgdb session, does the Linux kernel power off? Or when
you terminate gdb attached to a hardware debugger, does your board
vanish in space? No.
So let's stop terminating QEMU when the gdbstub receives a kill commando
in system emulation mode. Real termination can still be achieved via
"monitor quit". We keep the behavior for user mode emulation which is
arguably more like a gdbserver scenario.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Fix a leak of a file descriptor in error exit paths in
gdbserver_open().
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
accidently->accidentally
annother->another
choosen->chosen
consideres->considers
decriptor->descriptor
developement->development
paramter->parameter
preceed->precede
preceeding->preceding
priviledge->privilege
propogation->propagation
substraction->subtraction
throught->through
upto->up to
usefull->useful
Fix also grammar in posix-aio-compat.c
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
cppcheck report:
gdbstub.c:1781: error: Memory leak: s
Rearranging of the code avoids the leak.
v2:
Replace the g_malloc0() by g_new0() (suggested by Stuart Brady).
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
This allows a more efficient representation for 64-bit hosts.
It should be about the same for 32-bit hosts, as we can still
access the individual pieces of the double.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Next commit will convert the query-status command to use the
RunState type as generated by the QAPI.
In order to "transparently" replace the current enum by the QAPI
one, we have to make some changes to some enum values.
As the changes are simple renames, I'll do them in one shot. The
changes are:
- Rename the prefix from RSTATE_ to RUN_STATE_
- RUN_STATE_SAVEVM to RUN_STATE_SAVE_VM
- RUN_STATE_IN_MIGRATE to RUN_STATE_INMIGRATE
- RUN_STATE_PANICKED to RUN_STATE_INTERNAL_ERROR
- RUN_STATE_POST_MIGRATE to RUN_STATE_POSTMIGRATE
- RUN_STATE_PRE_LAUNCH to RUN_STATE_PRELAUNCH
- RUN_STATE_PRE_MIGRATE to RUN_STATE_PREMIGRATE
- RUN_STATE_RESTORE to RUN_STATE_RESTORE_VM
- RUN_STATE_PRE_MIGRATE to RUN_STATE_FINISH_MIGRATE
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Today, when notifying a VM state change with vm_state_notify(),
we pass a VMSTOP macro as the 'reason' argument. This is not ideal
because the VMSTOP macros tell why qemu stopped and not exactly
what the current VM state is.
One example to demonstrate this problem is that vm_start() calls
vm_state_notify() with reason=0, which turns out to be VMSTOP_USER.
This commit fixes that by replacing the VMSTOP macros with a proper
state type called RunState.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Gdb expects all registers windows to be flushed in ram, which is not the case
in Qemu. Therefore the back-trace generation doesn't work. This patch adds a
function to handle reads (and only read) in stack frames as if windows were
flushed.
Signed-off-by: Fabien Chouteau <chouteau@adacore.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Specific xtensa processor overlay for GDB contains register map in
the gdb/xtensa-config.c. This description is used by the GDB to e.g.
parse 'g' response packets and it may be reused in the qemu's gdbstub
(only XTREG definitions for non-pseudoregisters are needed).
Currently mainline GDB does not support operations with privileged SRs
(see http://sourceware.org/ml/gdb/2011-07/msg00075.html). This support
may be enabled, see NUM_CORE_REGS comment in the gdbstub.c
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Avoid warnings like these by wrapping recv():
CC slirp/ip_icmp.o
/src/qemu/slirp/ip_icmp.c: In function 'icmp_receive':
/src/qemu/slirp/ip_icmp.c:418:5: error: passing argument 2 of 'recv' from incompatible pointer type [-Werror]
/usr/local/lib/gcc/i686-mingw32msvc/4.6.0/../../../../i686-mingw32msvc/include/winsock2.h:547:32: note: expected 'char *' but argument is of type 'struct icmp *'
Remove also casts used to avoid warnings.
Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
target-mips has been switched to softfloat only long ago, but
a #ifndef CONFIG_SOFTFLOAT has been forgotten. Remove it.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
We have successfully lazilized cc computation, so we need to manually
trigger its calculation when gdb wants to fetch it. We also changed the
variable name, so writing it writes into a different field now.
Signed-off-by: Alexander Graf <agraf@suse.de>
When the VM goes into stop state while there is a gdb frontend attached,
it makes sense to inform gdb about this fact and at least a bit about
the stop reason. Basically, all stops are interesting except for the
temporary VMSTOP_SAVE/LOADVM.
The patch maps the relevant VMSTOP reasons on unique and more or less
associatable signals that gdb understands.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
This patch adds lm32 support to the gdbstub.
Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
Define and use dedicated constants for vm_stop reasons, they actually
have nothing to do with the EXCP_* defines used so far. At this chance,
specify more detailed reasons so that VM state change handlers can
evaluate them.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
On Windows, this is required to flush the remaining data in the IO stream,
otherwise Gdb do not receive the last packet.
Version 2:
Fix linux-user build error.
Signed-off-by: Fabien Chouteau <chouteau@adacore.com>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@petalogix.com>
If the compiler supports the warning flag -Wnested-externs, use it.
Avoid the only warning by moving the declaration of xml_builtin to a
more proper place.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Recalculate Sparc64 CPU flags on interrupts, otherwise some earlier
flags could be stored to pstate.
Refactor PSR/CCR/CWP handling: concentrate the actual
functions to op_helper.c.
Thanks to Igor Kovalenko for reporting.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
With this patch, 'gdb detach' correctly resumes the inferior execution
after detaching the debugger.
The bug was caused by qemu asking gdb to execute a syscall (isatty)
after the detach, and then waiting (forever) for the reply. I fixed this
by properly setting gdb_syscall_mode appropriately in the 'detach'
packet handling, so subsequent syscalls are solved by qemu rather than gdb.
Signed-off-by: Daniel Gutson <dgutson@codesourcery.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
cpu_gdb_read/write_register need to access the fpcr via the
cpu_alpha_load/store_fpcr functions.
The unique register is number 66 in the gdb remote protocol.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Attached is a patch to fix a typo in 'P' packet processing for M68K.
Without this patch, QEMU fails to honor GDB's P packets from GDB
(writing to registers) for the address registers (A0 - A7).
The problem is because of an obvious typo. Notice that the second
"if" condition is meant to be n < 16 in:
if (n < 8) {
:
} else if (n < 8) {
Signed-off-by: Kazu Hirata <kazu@codesourcery.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
The only thing to do here is to expose the current processor mode to GDB
and to set the processor mode properly when we change the PC.
Signed-off-by: Nathan Froyd <froydnj@codesourcery.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
In order to debug funny kernel breakages it's always good to have a working
gdb stub around.
While Uli's patches don't include one one, I needed one that's at least good
enough for 'bt' and some variable examinations during early bootup.
So here it is - the absolute basics to get the qemu gdb stub running with s390x
targets.
Sgined-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
We're leaking file descriptors to child processes. Set FD_CLOEXEC on file
descriptors that don't need to be passed to children to stop this misbehaviour.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
The char event RESET is emitted when a char device is opened.
Give it a better name.
Patchworks-ID: 35287
Signed-off-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
