Currently, a vm in the suspended state is not completely stopped. The VCPUs
have been paused, but the cpu clock still runs, and runstate notifiers for
the transition to stopped have not been called. This causes problems for
live migration. Stale cpu timers_state is saved to the migration stream,
causing time errors in the guest when it wakes from suspend, and state that
would have been modified by runstate notifiers is wrong.
Modify vm_stop to completely stop the vm if the current state is suspended,
transition to RUN_STATE_PAUSED, and remember that the machine was suspended.
Modify vm_start to restore the suspended state.
This affects all callers of vm_stop and vm_start, notably, the qapi stop and
cont commands:
old behavior:
RUN_STATE_SUSPENDED --> stop --> RUN_STATE_SUSPENDED
new behavior:
RUN_STATE_SUSPENDED --> stop --> RUN_STATE_PAUSED
RUN_STATE_PAUSED --> cont --> RUN_STATE_SUSPENDED
For example:
(qemu) info status
VM status: paused (suspended)
(qemu) stop
(qemu) info status
VM status: paused
(qemu) system_wakeup
Error: Unable to wake up: guest is not in suspended state
(qemu) cont
(qemu) info status
VM status: paused (suspended)
(qemu) system_wakeup
(qemu) info status
VM status: running
Suggested-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Steve Sistare <steven.sistare@oracle.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Link: https://lore.kernel.org/r/1704312341-66640-3-git-send-email-steven.sistare@oracle.com
Signed-off-by: Peter Xu <peterx@redhat.com>
As of now, the exit code was either EXIT_FAILURE when a panic shutdown
was requested or EXIT_SUCCESS otherwise.
However, some hardware could want to pass more complex exit codes. Thus,
introduce a new shutdown request function allowing that.
Signed-off-by: Clément Chigot <chigot@adacore.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20231003071427.188697-2-chigot@adacore.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Add qdev_add_vm_change_state_handler_full() variant that allows setting
a prepare callback in addition to the main callback.
This will facilitate adding P2P support for VFIO migration in the
following patches.
Signed-off-by: Avihai Horon <avihaih@nvidia.com>
Signed-off-by: Joao Martins <joao.m.martins@oracle.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Tested-by: YangHang Liu <yanghliu@redhat.com>
Signed-off-by: Cédric Le Goater <clg@redhat.com>
Add prepare callback to struct VMChangeStateEntry.
The prepare callback is optional and can be set by the new function
qemu_add_vm_change_state_handler_prio_full() that allows setting this
callback in addition to the main callback.
The prepare callbacks and main callbacks are called in two separate
phases: First all prepare callbacks are called and only then all main
callbacks are called.
The purpose of the new prepare callback is to allow all devices to run a
preliminary task before calling the devices' main callbacks.
This will facilitate adding P2P support for VFIO migration where all
VFIO devices need to be put in an intermediate P2P quiescent state
before being stopped or started by the main callback.
Signed-off-by: Avihai Horon <avihaih@nvidia.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Tested-by: YangHang Liu <yanghliu@redhat.com>
Signed-off-by: Cédric Le Goater <clg@redhat.com>
The function is unused since previous commit. Drop it.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Message-Id: <20230517123752.21615-4-vsementsov@yandex-team.ru>
Signed-off-by: Juan Quintela <quintela@redhat.com>
It's necessary to restore the state after failed/cancelled migration in
further commit.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Message-Id: <20230517123752.21615-2-vsementsov@yandex-team.ru>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Below is the updated version of the patch adding debugging support to WHPX.
It incorporates feedback from Alex Bennée and Peter Maydell regarding not
changing the emulation logic depending on the gdb connection status.
Instead of checking for an active gdb connection to determine whether QEMU
should intercept the INT1 exceptions, it now checks whether any breakpoints
have been set, or whether gdb has explicitly requested one or more CPUs to
do single-stepping. Having none of these condition present now has the same
effect as not using gdb at all.
Message-Id: <0e7f01d82e9e$00e9c360$02bd4a20$@sysprogs.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Along with other state tracking functions. Rename it for consistency.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20220323155743.1585078-21-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The 'running' argument from VMChangeStateHandler does not require
other value than 0 / 1. Make it a plain boolean.
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Message-Id: <20210111152020.1422021-3-philmd@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
runstate_check() returns a boolean. runstate_is_running()
returns what runstate_check() returns, also a boolean.
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20210111152020.1422021-2-philmd@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Move post-preconfig initialization to the x-exit-preconfig. If preconfig
is not requested, just exit preconfig mode immediately with the QMP
command.
As a result, the preconfig loop will run with accel_setup_post
and os_setup_post restrictions (xen_restrict, chroot, etc.)
already done.
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Handle bit 1 write, then post event to monitor.
Suggested by Paolo, declear a new event, using GUEST_PANICKED could
cause upper layers to react by shutting down or rebooting the guest.
In advance for extention, add GuestPanicInformation in event message.
Signed-off-by: zhenwei pi <pizhenwei@bytedance.com>
Message-Id: <20200114023102.612548-3-pizhenwei@bytedance.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
sysemu/sysemu.h is a rather unfocused dumping ground for stuff related
to the system-emulator. Evidence:
* It's included widely: in my "build everything" tree, changing
sysemu/sysemu.h still triggers a recompile of some 1100 out of 6600
objects (not counting tests and objects that don't depend on
qemu/osdep.h, down from 5400 due to the previous two commits).
* It pulls in more than a dozen additional headers.
Split stuff related to run state management into its own header
sysemu/runstate.h.
Touching sysemu/sysemu.h now recompiles some 850 objects. qemu/uuid.h
also drops from 1100 to 850, and qapi/qapi-types-run-state.h from 4400
to 4200. Touching new sysemu/runstate.h recompiles some 500 objects.
Since I'm touching MAINTAINERS to add sysemu/runstate.h anyway, also
add qemu/main-loop.h.
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190812052359.30071-30-armbru@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
[Unbreak OS-X build]
