For the A64 instruction set, the semihosting call instruction
is 'HLT 0xf000'. Wire this up to call do_arm_semihosting()
if semihosting is enabled.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Christopher Covington <christopher.covington@linaro.org>
Tested-by: Christopher Covington <cov@codeaurora.org>
Message-id: 1439483745-28752-10-git-send-email-peter.maydell@linaro.org
All tcg host architectures now support the guest base and as
there is no real performance lost, it can be always enabled.
Anyway, guest base use can be disabled lively by setting guest
base to 0.
CONFIG_USE_GUEST_BASE is defined as (USE_GUEST_BASE && USER_ONLY),
it should have to be replaced by CONFIG_USER_ONLY in non CONFIG_USER_ONLY
parts, but as some other parts are using !CONFIG_SOFTMMU I have chosen to
use !CONFIG_SOFTMMU instead.
Reviewed-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <1440373328-9788-2-git-send-email-laurent@vivier.eu>
Signed-off-by: Richard Henderson <rth@twiddle.net>
For the MIPS N64 ABI when QEMU reads the break/trap instruction so that
it can inspect the break/trap code it reads 8 rather than 4 bytes
which means it finds the code field from the instruction after the
break/trap instruction. This then causes the break/trap handling
code to fail because it does not understand the code number.
The fix forces QEMU to always read 4 bytes of instruction data rather
than deciding how much to read based on the ABI.
Signed-off-by: Andrew Bennett <andrew.bennett@imgtec.com>
Reviewed-by: Leon Alrae <leon.alrae@imgtec.com>
Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
Remove un-needed usages of ENV_GET_CPU() by converting the APIs to use
CPUState pointers and retrieving the env_ptr as minimally needed.
Scripted conversion for target-* change:
for I in target-*/cpu.h; do
sed -i \
's/\(^int cpu_[^_]*_exec(\)[^ ][^ ]* \*s);$/\1CPUState *cpu);/' \
$I;
done
Signed-off-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
All callsites to this function navigate the cpu->env_ptr only for the
function to take the env ptr back to the original cpu ptr. Change the
function to just pass in the CPU pointer instead. Removes a core code
usage of ENV_GET_CPU() (in gdbstub.c).
Cc: Riku Voipio <riku.voipio@iki.fi>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
In qemu-linux-user, when calling gethostbyname2(),
it was hanging in .__res_nmkquery.
(gdb) bt
0 in .__res_nmkquery () from /lib64/libresolv.so.2
1 in .__libc_res_nquery () from /lib64/libresolv.so.2
2 in .__libc_res_nsearch () from /lib64/libresolv.so.2
3 in ._nss_dns_gethostbyname3_r () from /lib64/libnss_dns.so.2
4 in ._nss_dns_gethostbyname2_r () from /lib64/libnss_dns.so.2
5 in .gethostbyname2_r () from /lib64/libc.so.6
6 in .gethostbyname2 () from /lib64/libc.so.6
.__res_nmkquery() is:
...
do { RANDOM_BITS (randombits); } while ((randombits & 0xffff) == 0);
...
<.__res_nmkquery+112>: mftbl r11
<.__res_nmkquery+116>: clrlwi r10,r11,16
<.__res_nmkquery+120>: cmpwi cr7,r10,0
<.__res_nmkquery+124>: beq cr7,<.__res_nmkquery+112>
but as mftbl (Move From Time Base Lower) is not implemented,
r11 is always 0, so we have an infinite loop.
This patch fills the Time Base register with cpu_get_real_ticks().
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Alexander Graf <agraf@suse.de>
When a thread is spawned, cpu_copy re-initializes
the bp & wp lists of current thread, instead of the ones
of the new thread.
The effect is that breakpoints are no longer hit.
Signed-off-by: Thierry Bultel <thierry.bultel@basystemes.fr>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Remove cpu_smm_register and cpu_smm_update. Instead, each CPU
address space gets an extra region which is an alias of
/machine/smram. This extra region is enabled or disabled
as the CPU enters/exits SMM.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The function is a nop for user mode, so just remove them.
Signed-off-by: Fam Zheng <famz@redhat.com>
Message-Id: <1426496617-10702-3-git-send-email-famz@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
New threads always point at the same env which is incorrect and usually
leads to a crash.
Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
start/end_exclusive() need be pairs, except the start_exclusive() in
stop_all_tasks() which is only used by force_sig(), which will be abort.
So at present, start_exclusive() in stop_all_task() need not be paired.
queue_signal() may call force_sig(), or return after kill pid (or queue
signal). If could return from queue_signal(), stop_all_task() would not
be called in time, the next end_exclusive() would be issue.
So in arm_kernel_cmpxchg64_helper() for ARM, need remove end_exclusive()
after queue_signal(). The related commit: "97cc756 linux-user: Implement
new ARM 64 bit cmpxchg kernel helper".
Signed-off-by: Chen Gang <gang.chen.5i5j@gmail.com>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
When support was added for TrustZone to ARM CPU emulation, we failed
to correctly update the support for the linux-user implementation of
the get/set_tls syscalls. This meant that accesses to the TPIDRURO
register via the syscalls were always using the non-secure copy of
the register even if native MRC/MCR accesses were using the secure
register. This inconsistency caused most binaries to segfault on startup
if the CPU type was explicitly set to one of the TZ-enabled ones like
cortex-a15. (The default "any" CPU doesn't have TZ enabled and so is
not affected.)
Use access_secure_reg() to determine whether we should be using
the secure or the nonsecure copy of TPIDRURO when emulating these
syscalls.
Signed-off-by: Mikhail Ilyin <m.ilin@samsung.com>
Message-id: 1426505198-2411-1-git-send-email-m.ilin@samsung.com
[PMM: rewrote commit message to more clearly explain the issue
and its consequences.]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This reverts commit b8a173b25c, reversing
changes made to 5de090464f.
(I applied this pull request when I should not have done so, and
am now immediately reverting it.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This was the only caller of cpu_init() that was not checking for NULL
yet.
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
In main.c, all SIG* should be TARGET_SIG*, since the relevant functions
(queue_signal() and gdb_handlesig()) expect TARGET_SIG*.
The corresponding vi command is "1,$ s/\<SIG/TARGET_SIG/g".
Signed-off-by: Chen Gang <gang.chen.5i5j@gmail.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
The function end_exclusive() isn't used on all targets; mark it as
such to avoid a clang warning.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
The start_exclusive() infrastructure is used on all target
architectures, even if only to do the "stop all CPUs before
dumping core" in force_sig(), so be consistent and call
cpu_exec_start/end in the main loop of every target.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
In the m68k cpu_loop() use get_user_u16 to read the immediate for
the simcall rahter than lduw, to bring it into line with how other
archs do it and to remove another user of the ldl family of functions.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 1421334118-3287-8-git-send-email-peter.maydell@linaro.org
The TARGET_HAS_ICE #define is intended to indicate whether a target-*
guest CPU implementation supports the breakpoint handling. However,
all our guest CPUs have that support (the only two which do not
define TARGET_HAS_ICE are unicore32 and openrisc, and in both those
cases the bp support is present and the lack of the #define is just
a bug). So remove the #define entirely: all new guest CPU support
should include breakpoint handling as part of the basic implementation.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Message-id: 1420484960-32365-1-git-send-email-peter.maydell@linaro.org
Replace the 20Kc original MIPS64 ISA processor used for 64-bit user
emulation with the 5KEf processor that implements the MIPS64r2 ISA,
complementing the choice of the 24Kf processor for 32-bit emulation.
Signed-off-by: Maciej W. Rozycki <macro@codesourcery.com>
Reviewed-by: Leon Alrae <leon.alrae@imgtec.com>
Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
When EL3 is running in AArch32 (or ARMv7 with Security Extensions)
FCSEIDR, CONTEXTIDR, TPIDRURW, TPIDRURO and TPIDRPRW have a secure
and a non-secure instance.
Signed-off-by: Fabian Aggeler <aggelerf@ethz.ch>
Signed-off-by: Greg Bellows <greg.bellows@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1416242878-876-25-git-send-email-greg.bellows@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
On AArch64 the si_addr field of siginfo_t is truncated to 32 bits
because the fault address passes through an uint32_t variable.
Follow Peters suggestion and drop the uint32_t variable
since its only used once in the Aarch64 loop.
Reported-by: Amanieu d'Antras <amanieu@gmail.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
This patch introduces the -seed command line option and the
QEMU_RAND_SEED environment variable for setting the random seed, which
is used for the AT_RANDOM ELF aux entry.
Signed-off-by: Magnus Reftel <reftel@spotify.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
The current implementation of watchpoints requires that they
have a power of 2 length which is not greater than TARGET_PAGE_SIZE
and that their address is a multiple of their length. Watchpoints
on ARM don't fit these restrictions, so change the implementation
so they can be relaxed.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Currently syscall instruction is buggy on user mode X86_64,
the EIP is updated after do_syscall(), that is too late for
clone(). Because clone() will create a thread at the env->EIP
(the address of syscall insn), and then child thread enters
do_syscall() again, that is not expected. Sometimes it is tragic.
User mode syscall insn emulation is not used MSR, so the
action should be same to INT 0x80. INT 0x80 will update EIP in
do_interrupt(), ditto for syscall() for consistency.
Signed-off-by: Jincheng Miao <jmiao@redhat.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
The default, 970fx, doesn't support MSR_LE. So even though we set LE in
ppc_cpu_reset, it gets cleared again in hreg_store_msr. Error out if a
user-selected cpu model doesn't support LE.
Signed-off-by: Richard Henderson <rth@twiddle.net>
[agraf: switch to POWER7 as default for BE and LE]
Signed-off-by: Alexander Graf <agraf@suse.de>
OABI arm used a software interrupt(0xef9f0001) for breakpoints.
Since 2005 gdb has used the break instruction(0xe7f001f0) for EABI.
Apparently Steel Bank Common Lisp still uses the swi instruction.
This is the kernel implementation:
http://lxr.free-electrons.com/source/arch/arm/kernel/traps.c#L598
Signed-off-by: Hunter Laux <hunterlaux@gmail.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
As a "utility", it only supported ppc, and in a way that other
tcg backends provided directly in tcg-target.h. Removing this
disparity is easier now that the two ppc backends are merged.
Tested-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Instead of getting backup auxv data from the env pointer given to main,
read it from /proc/self/auxv. We can do this at any time, so we're not
tied to any ordering wrt a call to qemu_init_auxval from main.
Tested-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Richard Henderson <rth@twiddle.net>
The size and register information are encoded into the reserve_info field
of CPU state in the store conditional translation code. Specifically, the
size is shifted left by 5 bits (see target-ppc/translate.c gen_conditional_store).
The user-mode store conditional code erroneously extracts the size by ANDing
with a 4 bit mask; this breaks if size >= 16.
Eliminate the mask to make the extraction of size mirror its encoding.
Signed-off-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
This allows running PPC64 little-endian in user mode if target is configured
that way. In PPC64 LE user mode we set MSR.LE during initialization.
Signed-off-by: Doug Kwan <dougkwan@google.com>
Signed-off-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
With the next patch, these need to be correct or VM86 tasks
have the wrong CPL. The flags are basically what the Intel VMX
documentation say is mandatory for entry into a VM86 guest.
For consistency, SMM ought to have the same flags except with
CPL=0.
Tested-by: Kevin O'Connor <kevin@koconnor.net>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Instead of manually calling cpu_x86_set_cpl() when the CPL changes,
check for CPL changes on calls to cpu_x86_load_seg_cache(R_CS). Every
location that called cpu_x86_set_cpl() also called
cpu_x86_load_seg_cache(R_CS), so cpu_x86_set_cpl() is no longer
required.
This fixes the SMM handler code as it was not setting/restoring the
CPL level manually.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
--enable-uname-release was a rather heavyweight hammer, as it allows
providing values less that UNAME_MINIMUM_RELEASE. Also, it affects
all built linux-user targets, which in most cases is not what user
wants.
Now that we have UNAME_MINIMUM_RELEASE for all linux-user platforms,
we can drop --enable-uname-release and the related CONFIG_UNAME_RELEASE
define.
Users can still override the variable with QEMU_UNAME=2.6.32 or -r
command line option. If distributors need to update a minimum version
for a specific target, it can be done by updating UNAME_MINIMUM_RELEASE.
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
For AArch32 exceptions, the only information provided about
the cause of an exception is the individual exception type (data
abort, undef, etc), which we store in cs->exception_index. For
AArch64, the CPU provides much more detail about the cause of
the exception, which can be found in the syndrome register.
Create a set of fields in CPUARMState which must be filled in
whenever an exception is raised, so that exception entry can
correctly fill in the syndrome register for the guest.
This includes the information which in AArch32 appears in
the DFAR and IFAR (fault address registers) and the DFSR
and IFSR (fault status registers) for data aborts and
prefetch aborts, since if we end up taking the MMU fault
to AArch64 rather than AArch32 this will need to end up
in different system registers.
This patch does a refactoring which moves the setting of the
AArch32 DFAR/DFSR/IFAR/IFSR from the point where the exception
is raised to the point where it is taken. (This is no change
for cores with an MMU, retains the existing clearly incorrect
behaviour for ARM946 of trashing the MP access permissions
registers which share the c5_data and c5_insn state fields,
and has no effect for v7M because we don't implement its
MPU fault status or address registers.)
As a side effect of the cleanup we fix a bug in the AArch64
linux-user mode code where we were passing a 64 bit fault
address through the 32 bit c6_data/c6_insn fields: it now
goes via the always-64-bit exception.vaddress.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Most targets were using offsetof(CPUFooState, breakpoints) to determine
how much of CPUFooState to clear on reset. Use the next field after
CPU_COMMON instead, if any, or sizeof(CPUFooState) otherwise.
Signed-off-by: Andreas Färber <afaerber@suse.de>
* remotes/riku/linux-user-for-upstream:
linux-user: set minimum kernel version to 2.6.32
linux-user: correct handling of break exception for MIPS
linux-user: translate signal number on return from sigtimedwait
linux-user: Implement sendmmsg syscall
linux-user: Fix getresuid, getresgid if !USE_UID16
linux-user: Don't use UID16 on AArch64
linux-user: AArch64: Implement SA_RESTORER for signal handlers
linux-user/signal.c: Fix AArch64 big-endian FP register restore
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This patch adds the Store Quadword Conditionl (stqcx.) instruction
which is introduced in Power ISA 2.07.
Signed-off-by: Tom Musta <tommusta@gmail.com>
[agraf: fix compile error when !TARGET_PPC64]
Signed-off-by: Alexander Graf <agraf@suse.de>
Exception with break instruction has not been correctly propagated as
SIGTRAP. This resolves crash issues with examples that use break
instruction on MIPS.
Signed-off-by: Petar Jovanovic <petar.jovanovic@imgtec.com>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Signed-off-by: Janne Grunau <j@jannau.net>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This implement exclusive loads/stores for aarch64 along the lines of
arm32 and ppc implementations. The exclusive load remembers the address
and loaded value. The exclusive store throws an an exception which uses
those values to check for equality in a proper exclusive region.
This is not actually the architecture mandated semantics (for either
AArch32 or AArch64) but it is close enough for typical guest code
sequences to work correctly, and saves us from having to monitor all
guest stores. It's fairly easy to come up with test cases where we
don't behave like hardware - we don't for example model cache line
behaviour. However in the common patterns this works, and the existing
32 bit ARM exclusive access implementation has the same limitations.
AArch64 also implements new acquire/release loads/stores (which may be
either exclusive or non-exclusive). These imposes extra ordering
constraints on memory operations (ie they act as if they have an implicit
barrier built into them). As TCG is single-threaded all our barriers
are no-ops, so these just behave like normal loads and stores.
Signed-off-by: Michael Matz <matz@suse.de>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
In preparation for adding support for A64 load/store exclusive instructions,
widen the fields in the CPU state struct that deal with address and data values
for exclusives from 32 to 64 bits. Although in practice AArch64 and AArch32
exclusive accesses will be generally separate there are some odd theoretical
corner cases (eg you should be able to do the exclusive load in AArch32, take
an exception to AArch64 and successfully do the store exclusive there), and it's
also easier to reason about.
The changes in semantics for the variables are:
exclusive_addr -> extended to 64 bits; -1ULL for "monitor lost",
otherwise always < 2^32 for AArch32
exclusive_val -> extended to 64 bits. 64 bit exclusives in AArch32 now
use the high half of exclusive_val instead of a separate exclusive_high
exclusive_high -> is no longer used in AArch32; extended to 64 bits as
it will be needed for AArch64's pair-of-64-bit-values exclusives.
exclusive_test -> extended to 64 bits, as it is an address. Since this is
a linux-user-only field, in arm-linux-user it will always have the top
32 bits zero.
exclusive_info -> stays 32 bits, as it is neither data nor address, but
simply holds register indexes etc. AArch64 will be able to fit all its
information into 32 bits as well.
Note that the refactoring of gen_store_exclusive() coincidentally fixes
a minor bug where ldrexd would incorrectly update the first CPU register
even if the load for the second register faulted.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
The common pattern for system registers in a 64-bit capable ARM
CPU is that when in AArch32 the cp15 register is a view of the
bottom 32 bits of the 64-bit AArch64 system register; writes in
AArch32 leave the top half unchanged. The most natural way to
model this is to have the state field in the CPU struct be a
64 bit value, and simply have the AArch32 TCG code operate on
a pointer to its lower half.
For aarch64-linux-user the only registers we need to share like
this are the thread-local-storage ones. Widen their fields to
64 bits and provide the 64 bit reginfo struct to make them
visible in AArch64 state. Note that minor cleanup of the AArch64
system register encoding space means We can share the TPIDR_EL1
reginfo but need split encodings for TPIDR_EL0 and TPIDRRO_EL0.
Since we're touching almost every line in QEMU that uses the
c13_tls* fields in this patch anyway, we take the opportunity
to rename them in line with the standard ARM architectural names
for these registers.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
With this we no longer pass down envp, and thus all systems can have
the same void prototype. So also eliminate a useless thunk.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Since this is only read in cpu_copy() and linux-user has a global
cpu_model, drop the field from generic code.
Signed-off-by: Andreas Färber <afaerber@suse.de>
It is only used there and is deemed very fragile if not incorrect in its
current memcpy() form. Moving it into linux-user will allow to move
parts into target_cpu.h headers and only copy what the ABI mandates.
Signed-off-by: Andreas Färber <afaerber@suse.de>
microMIPS instructions that cause breakpoint exceptions come in
16-bit and 32-bit variants. When handling exceptions caused by
such instructions, the instruction type needs to be taken into
account when extracting the break code.
The code has also been restructured for better clarity.
Signed-off-by: Kwok Cheung Yeung <kcy@codesourcery.com>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
The binfmt_misc module can calculate the credentials and security
token according to the binary instead of to the interpreter if the
'C' flag is enabled.
To be able to execute non-readable binaries, this flag implies 'O'
flag. When 'O' flag is enabled, bintfmt_misc opens the file for
reading and pass the file descriptor to the interpreter.
References:
linux/Documentation/binfmt_misc.txt ['O' and 'C' description]
linux/fs/binfmt_misc.c linux/fs/binfmt_elf.c [ AT_EXECFD usage ]
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
The name field of MIPS_SYS isn't actually used; it's just documentation.
But adjust the umount entries to match mips/syscall_nr.h anyway.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
This patch adds support for AArch64 in all the small corners of
linux-user (primarily in image loading and startup code).
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: John Rigby <john.rigby@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1378235544-22290-22-git-send-email-peter.maydell@linaro.org
Message-id: 1368505980-17151-11-git-send-email-john.rigby@linaro.org
[PMM:
* removed some unnecessary #defines from syscall.h
* catch attempts to use a 32 bit only cpu with aarch64-linux-user
* termios stuff moved into its own patch
* we specify our minimum uname version here now
]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
For newer target architectures, glibc can be picky about the kernel
version: for example, it will not run on an aarch64 system unless
the kernel reports itself as at least 3.8.0. Accommodate this by
enhancing the existing support for faking the kernel version so
that each target can optionally specify a minimum version: if
the user doesn't force a specific fake version then we will override
with the minimum required version only if the real host kernel
version is insufficient.
Use this facility to let aarch64 report a minimum of 3.8.0.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1378235544-22290-21-git-send-email-peter.maydell@linaro.org
Add the main linux-user cpu loop for AArch64. Since AArch64
has a different system call interface, doesn't need to worry
about FPA emulation and may in the future keep the prefetch/data
abort information in different system registers, it's simplest
just to use a completely separate loop from the 32 bit ARM
target, rather than peppering it with ifdefs.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1378235544-22290-14-git-send-email-peter.maydell@linaro.org
sys_mremap missed 5th argument (new_address), which caused examples that
remap to a specific address to fail.
sys_splice missed 5th and 6th argument which caused different examples to
fail.
This change has an effect on MIPS target only.
Signed-off-by: Petar Jovanovic <petar.jovanovic@imgtec.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
* riku/linux-user-for-upstream: (21 commits)
linux-user: Handle compressed ISA encodings when processing MIPS exceptions
linux-user: Unlock mmap_lock when resuming guest from page_unprotect
linux-user: Reset copied CPUs in cpu_copy() always
linux-user: Fix epoll on ARM hosts
linux-user: fix segmentation fault passing with h2g(x) != x
linux-user: Fix pipe syscall return for SPARC
linux-user: Fix target_stat and target_stat64 for OpenRISC
linux-user: Avoid conditional cpu_reset()
configure: Make NPTL non-optional
linux-user: Enable NPTL for x86-64
linux-user: Add i386 TLS setter
linux-user: Clean up handling of clone() argument order
linux-user: Add missing 'break' in i386 get_thread_area syscall
linux-user: Enable NPTL for m68k
linux-user: Enable NPTL for SPARC targets
linux-user: Enable NPTL for OpenRISC
linux-user: Move includes of target-specific headers to end of qemu.h
configure: Enable threading for unicore32-linux-user
configure: Enable threading on all ppc and mips linux-user targets
configure: Don't say target_nptl="no" if there is no linux-user target
...
Conflicts:
linux-user/main.c
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Decode trap instructions during the handling of an EXCP_BREAK or EXCP_TRAP
according to the current ISA mode.
Signed-off-by: Kwok Cheung Yeung <kcy@codesourcery.com>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Some CPUs reset as part of cpu_init(), some others were reset
afterwards, some not at all. While some targets didn't implement a
cpu_[state_]reset() function, QOM cpu_reset() is always available.
There's nothing wrong with resetting twice on startup, so drop
the #ifdef.
Suggested-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Cc: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Now all linux-user targets support building with NPTL, we can make it
mandatory. This is a good idea because:
* NPTL is no longer new and experimental; it is completely standard
* in practice, linux-user without NPTL is nearly useless for
binaries built against non-ancient glibc
* it allows us to delete the rather untested code for handling
the non-NPTL configuration
Note that this patch leaves the CONFIG_USE_NPTL ifdefs in the
bsd-user codebase alone. This makes no change for bsd-user, since
our configure test for NPTL had a "#include <linux/futex.h>"
which means bsd-user would never have been compiled with
CONFIG_USE_NPTL defined, and it still is not.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
sys_futex has 6 arguments, and all of these need to be copied. Fix incorrect
declaration in the mips_syscall_args array.
This change fixes the cases where the 5th and 6th arguments have non-zero
value and have importance. An example is a Linux implementation of
pthread_cond_wait() function.
Signed-off-by: Petar Jovanovic <petar.jovanovic@imgtec.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Since commit 878096eeb2 (cpu: Turn
cpu_dump_{state,statistics}() into CPUState hooks) CPUArchState is no
longer needed.
Add documentation and make the functions available through qemu/log.h
outside NEED_CPU_H to allow use in qom/cpu.c. Moving them to qom/cpu.h
was not yet possible due to convoluted include paths, so that some
devices grow an implicit and unneeded dependency on qom/cpu.h for now.
Acked-by: Michael Walle <michael@walle.cc> (for lm32)
Reviewed-by: Richard Henderson <rth@twiddle.net>
[AF: Simplified mb_cpu_do_interrupt() and do_interrupt_all() changes]
Signed-off-by: Andreas Färber <afaerber@suse.de>
Move next_cpu from CPU_COMMON to CPUState.
Move first_cpu variable to qom/cpu.h.
gdbstub needs to use CPUState::env_ptr for now.
cpu_copy() no longer needs to save and restore cpu_next.
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
[AF: Rebased, simplified cpu_copy()]
Signed-off-by: Andreas Färber <afaerber@suse.de>
Make cpustats monitor command available unconditionally.
Prepares for changing kvm_handle_internal_error() and kvm_cpu_exec()
arguments to CPUState.
Signed-off-by: Andreas Färber <afaerber@suse.de>
It no longer depends on CPUArchState, so move it to qom/cpu.c.
Prepares for changing GDBState::c_cpu to CPUState.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Everything else needs to match the executable name, which is
TARGET_NAME.
Before:
$ sh4eb-linux-user/qemu-sh4eb --help
usage: qemu-sh4 [options] program [arguments...]
Linux CPU emulator (compiled for sh4 emulation)
After:
$ sh4eb-linux-user/qemu-sh4eb --help
usage: qemu-sh4eb [options] program [arguments...]
Linux CPU emulator (compiled for sh4eb emulation)
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 1370349928-20419-5-git-send-email-pbonzini@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This replaces the feature-bit fields on both X86CPU and x86_def_t
structs with an array.
With this, we will be able to simplify code that simply does the same
operation on all feature words (e.g. kvm_check_features_against_host(),
filter_features_for_kvm(), add_flagname_to_bitmaps(), CPU feature-bit
property lookup/registration, and the proposed "feature-words" property)
The following field replacements were made on X86CPU and x86_def_t:
(cpuid_)features -> features[FEAT_1_EDX]
(cpuid_)ext_features -> features[FEAT_1_ECX]
(cpuid_)ext2_features -> features[FEAT_8000_0001_EDX]
(cpuid_)ext3_features -> features[FEAT_8000_0001_ECX]
(cpuid_)ext4_features -> features[FEAT_C000_0001_EDX]
(cpuid_)kvm_features -> features[FEAT_KVM]
(cpuid_)svm_features -> features[FEAT_SVM]
(cpuid_)7_0_ebx_features -> features[FEAT_7_0_EBX]
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
The linux-user usage message attempts to line up the columns in
its table by calculating the maximum width of any item in them.
However for the 'Argument' column it was only accounting for the
length of the option switch (eg "-d"), not the additional example
text (eg "item[,...]"). This currently has no adverse effects
because the widest item in the column happens to be the argumentless
"-singlestep" option, but improving the "-d" option help to read
"-d item[,...]" exceeds that limit.
Fix this by correctly calculating maxarglen as the width of the
first column text including a possible option argument, and
adjusting its uses to match.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
GCC and GAS are capable of generating traps or breaks to check for
division by zero. Additionally, GAS is capable of generating traps
or breaks to check for overflow on certain division and multiplication
operations. The Linux kernel translates these traps and breaks into
signals. This patch implements the corresponding feature in QEMU.
Signed-off-by: Meador Inge <meadori@codesourcery.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Switch the default for qemu_log logging output from "/tmp/qemu.log"
to stderr. This is an incompatible change in some sense, but logging
is mostly used for debugging purposes so it shouldn't affect production
use. The previous behaviour can be obtained by adding "-D /tmp/qemu.log"
to the command line.
This change requires us to:
* update all the documentation/help text (we take the opportunity
to smooth out minor inconsistencies between the phrasing in
linux-user/bsd-user/system help messages)
* make linux-user and bsd-user defer to qemu-log for the default
logging destination rather than overriding it themselves
* ensure that all logfile closing is done via qemu_log_close()
and that that function doesn't close stderr
as well as the obvious change to the behaviour of do_qemu_set_log()
when no logfile name has been specified.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-id: 1361901160-28729-1-git-send-email-peter.maydell@linaro.org
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Rename the public-facing function cpu_set_log to qemu_set_log. This
requires us to rename the internal-only qemu_set_log() to
do_qemu_set_log().
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Rename cpu_str_to_log_mask() to qemu_str_to_log_mask(), since
the qemu_log functionality is no longer restricted to TCG CPU
debug logging.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Abstract out the "print a human readable list of all the
valid log categories" functionality which is currently duplicated
in three separate places. (We leave the monitor.c help_cmd()
implementation as-is since it wants to send the message to
the monitor and add its own information.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
The qemu_log() functionality is no longer specific to TCG CPU debug logs.
Rename cpu_set_log_filename() to qemu_set_log_filename() and drop the
pointless wrapper set_cpu_log_filename().
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
It's worth to clean-up translation blocks variables and move them
into one context as was suggested by Swirl.
Also if we use this context directly inside tcg_ctx, then it
speeds up code generation a bit.
Signed-off-by: Evgeny Voevodin <evgenyvoevodin@gmail.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Since commit 65dee38052 (target-i386:
move cpu_reset and reset callback to cpu.c) the x86 CPU is reset through
cpu_init() but was still reset immediately after in linux-user and
bsd-user. Clean this up.
Similarly in linux-user/syscall.c it is also reset after cpu_copy().
But that's a bug of its own, fixing which poses a semantic change.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
MIPS only supports 31 bits of virtual address space for user space, so let's
make sure we stay within that limit with our preallocated memory block.
This fixes the MIPS user space targets when executed without command line
option.
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Make the user path more like the system path. Prepare for more kinds
of runtime exceptions. Rename ILC to ILEN to make it clear that we
want to pass around a full instruction length, rather than a "code"
that happens to be stored one bit left in a larger field.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Fixes a clone() emulation bug were the new thread starts
at the point of the syscall and thus clones in a loop.
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
Avoid speculatively computing flags before every potentially trapping
operation and instead do the flags computation when a trap actually
occurs. This gives approximately 30% speedup in emulation.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
If the attempt to load the guest executable fails, print the
error message as a string, not a number. This requires us to
fix a couple of places in loader_exec() where we were returning
-1 instead of a valid negative errno.
The change allows us to drop the "Unknown binary format" message
because the strerror-enhanced message is now a more self-explanatory
"Error while loading $guest-binary: Exec format error".
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Since the only user of the extended cpu_list_id() format
was the x86 ?model/?dump/?cpuid output, we can drop it
completely.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Remove the cpu_get_real_ticks() definition from linux-user/main.c.
This has been disabled via #if 0 and unused since commit 1dce7c3c22
in 2006; the definitions we actually use are in qemu-timer.h.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Now that we default to reserving nearly 4GB of RAM for the guest
address space when running a 32 bit linux-user guest on 64 bit
hosts, users are much more likely to run into it. Reword the
message to be more informative about what failed and provide
suggestions for how to fix things.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Declare arg_table to be "static const", and adjust the two users
to also be const.
Signed-off-by: Jim Meyering <meyering@redhat.com>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
When running in thumb mode, Linux doesn't evaluate the immediate value
of the svc instruction, but instead just always assumes the syscall number
to be in r7.
This fixes executing go_bootstrap while building go for me.
Signed-off-by: Alexander Graf <agraf@suse.de>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Roll the code used to initialize the guest memory space when -R
or -B is used into 'init_guest_space' and then call 'init_guest_space'
from the driver. This way the reserved guest memory space can
be probed for. Calling 'mmap' just once as is currently done is not
guaranteed to succeed since the host address space validation might fail.
Signed-off-by: Meador Inge <meadori@codesourcery.com>
[PMM: Fixed minor whitespace errors.]
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This patch initializes the cpuid to exactly correct value because
linux kernel will check it.
In addition, the exception types are specified in proper situations.
Then it could make exceptions generated correctly and timely.
Signed-off-by: Guan Xuetao <gxt@mprc.pku.edu.cn>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Proper signal numbers were not defined, and EXCP_INTERRUPT
was unhandled, leading to all sorts of subtle confusion.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
For command line options which permit '?' meaning 'please list the
permitted values', add support for 'help' as a synonym, by abstracting
the check out into a helper function.
This change means that in some cases where we were being lazy in
our string parsing, "?junk" will now be rejected as an invalid option
rather than being (undocumentedly) treated the same way as "?".
Update the documentation to use 'help' rather than '?', since '?'
is a shell metacharacter and thus prone to fail confusingly if there
is a single character filename in the current working directory and
the '?' has not been escaped. It's therefore better to steer users
towards 'help', though '?' is retained for backwards compatibility.
We do not, however, update the output of the system emulator's -help
(or any documentation autogenerated from the qemu-options.hx which
is the source of the -help text) because libvirt parses our -help
output and will break. At a later date when QEMU provides a better
interface so libvirt can avoid having to do this, we can update the
-help text too.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Don't use global variables directly but via accessor functions. Rename globals.
Convert macros to functions, add GCC format attributes.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Add support for ARM BE8 userspace binaries.
i.e. big-endian data and little-endian code.
In principle LE8 mode is also possible, but AFAIK has never actually
been implemented/used.
System emulation doesn't have any useable big-endian board models,
but should in principle work once you fix that.
Dynamic endianness switching requires messing with data accesses,
preferably with TCG cooperation, and is orthogonal to BE8 support.
Signed-off-by: Paul Brook <paul@codesourcery.com>
[PMM: various changes, mostly as per my suggestions in code review:
* rebase
* use EF_ defines rather than hardcoded constants
* make bswap_code a bool for future VMSTATE macro compatibility
* update comment in cpu.h about TB flags bit field usage
* factor out load-code-and-swap into arm_ld*_code functions and
get_user_code* macros
* fix stray trailing space at end of line
* added braces in disas.c to satisfy checkpatch
]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
When running 32-on-64 bit guests, we should always reserve as much
virtual memory as we possibly can for the guest process, so it can
never overlap with QEMU address space.
Fortunately we already have the infrastructure for that. All that's
missing is some sane default value to also make use of it!
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
After consulting with Paul Brook, we concluded that it's best to search
the VMA space downwards, so that we don't even get the chance to conflict
with the brk range.
This patch resolves a bunch of allocation conflicts when using -R.
Signed-off-by: Alexander Graf <agraf@suse.de>
[minor changes to get it to apply -- PMM]
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
TaskState contains linux_bprm struct which encapsulates argv among
other things.
argv might be used around the code and is expected to contain valid
data. Before this patch, ts->bprm->argv was NULL due to it being
freed right after loader_exec().
Signed-off-by: Fabio Erculiani <lxnay@sabayon.org>
Acked-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Scripted conversion:
for file in *.[hc] hw/*.[hc] hw/kvm/*.[hc] linux-user/*.[hc] linux-user/m68k/*.[hc] bsd-user/*.[hc] darwin-user/*.[hc] tcg/*/*.[hc] target-*/cpu.h; do
sed -i "s/CPUState/CPUArchState/g" $file
done
All occurrences of CPUArchState are expected to be replaced by QOM CPUState,
once all targets are QOM'ified and common fields have been extracted.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
Frees the identifier cpu_reset for QOM CPUs (manual rename).
Don't hide the parameter type behind explicit casts, use static
functions with strongly typed argument to indirect.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
Link the Object base class and the module infrastructure for class
registration. Introduce $(universal-obj-y) for objects that are more
common than $(common-obj-y), so that those only get built once.
Call QOM module init for type registration.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Cc: Anthony Liguori <anthony@codemonkey.ws>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
QEMU linux user-mode's default log file name is "/tmp/qemu.log". In order to
change the log file name, user need to modify the source code then recompile
QEMU. This patch allow user use "-D logfile" option to specify the log file
name.
Signed-off-by: Chen Wen-Ren <chenwj@iis.sinica.edu.tw>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Use target_ulong instead of hard-coded uint32_t.
Remove the disabled printf's that are redundant with -strace.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Fix the "-version" option, which was accidentally broken in commit
fc9c541:
* exit after printing version information rather than proceeding
blithely onward (and likely printing the full usage message)
* correct the cut-n-paste error in the usage message for it
* don't insist on the presence of a following argument for
options which don't take an argument (this was preventing
'qemu-arm -version' from working)
* remove a spurious argc check from the beginning of main() which
meant 'QEMU_VERSION=1 qemu-arm' didn't work.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Andrzej Zaborowski <andrew.zaborowski@intel.com>
(Edits by Riku Voipio to apply to current HEAD)
Rework option parsing code for linux-user in a table-driven manner to allow
environment variables for all commandline options.
Also generate usage() output from option table.
Fix complains from checkpatch.pl, also have envlist global
Signed-off-by: Johannes Schauer <j.schauer@email.de>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
On MIPS, some syscall arguments are taken from the stack. This patch adds
verification such that do_syscall() is only invoked if all arguments
have been successfully taken from the stack.
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: An-Cheng Huang <ancheng@ubnt.com>
Change the number of argument for MIPS sys_syscall from 0 to 8. This
allows arguments for indirect syscalls to be processed correctly.
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: An-Cheng Huang <ancheng@ubnt.com>
If gdbserver_start() fails (usually because we couldn't bind to the
requested TCP port) then exit qemu rather than blithely continuing.
This brings the linux-user behaviour in to line with system mode.
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
linux-user: Implement new ARM 64 bit cmpxchg kernel helper
Linux 3.1 will have a new kernel-page helper for ARM implementing
64 bit cmpxchg. Implement this helper in QEMU linux-user mode:
* Provide kernel helper emulation for 64bit cmpxchg
* Allow guest to object to guest offset to ensure it can map a page
* Populate page with kernel helper version
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Dr. David Alan Gilbert <david.gilbert@linaro.org>
Do not allocate TCG-only resources like the translation buffer when
running over KVM or XEN. Saves a "few" bytes in the qemu address space
and is also conceptually cleaner.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
The code which prints the debug usage message on '-d ?' for *-user
has to come before the check for "not enough arguments", so that
"qemu-foo -d ?" prints the list of possible debug log items rather than
the generic usage message. (This was inadvertently broken in commit
c235d73.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Andrzej Zaborowski <andrew.zaborowski@intel.com>
Dereferencing a null pointer causes an exception 0xC (EXCP_AdEL)
instead of EXCP_TLBL. This should also trigger a segfault.
Signed-off-by: Wesley W. Terpstra <terpstra@debian.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Return -TARGET_ENOSYS instead of -ENOSYS from linux-user/main.c
* Caused strange 'Level 2 synchronization messages' instead of
correctly reporting the syscall was missing.
* Made glibc simply fail instead of using older syscalls
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Signed-off-by: Wesley W. Terpstra <terpstra@debian.org>
The syscall sigaltstack takes two parameters, not zero. This patch
should have no impact as only values above 4 influence the runtime
behaviour. Nevertheless, it is wrong.
Signed-off-by: Wesley W. Terpstra <terpstra@debian.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Add syscall numbers for new syscall numbers; this brings us
into line with Linux 2.6.39.2.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
On 32 bit MIPS a few syscalls have 7 arguments, and so to call
them via NR_syscall the guest needs to be able to pass 8 arguments
to do_syscall(). Raise the number of arguments do_syscall() takes
accordingly.
This fixes some gcc 4.6 compiler warnings about arg7 and arg8
variables being set and never used.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@iki.fi>
Add command line support for logging to a location other than /tmp/qemu.log.
With logging enabled (command line option -d), the log is written to
the hard-coded path /tmp/qemu.log. This patch adds support for writing
the log to a different location by passing the -D option.
Signed-off-by: Matthew Fernandez <matthew.fernandez@gmail.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
There's no need to attempt to match EXCP_* values with PALcode entry
point offsets. Instead, compress all the values to make for more
efficient switch statements within QEMU.
We will be doing TLB fill within QEMU proper, not within the PALcode,
so all of the ITB/DTB miss, double fault, and access exceptions can
be compressed to EXCP_MMFAULT.
Compress all of the EXCP_CALL_PAL exceptions into one.
Use env->error_code to store the specific entry point.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Delete all the code that tried to emulate the real IPRs of some
unnamed CPU. Replace those with just 3 slots that we can use to
communicate trap information between the helper functions that
signal exceptions and the OS trap handler.
Signed-off-by: Richard Henderson <rth@twiddle.net>
* 's390-next' of git://repo.or.cz/qemu/agraf:
s390x: complain when allocating ram fails
s390x: fix memory detection for guests > 64GB
s390x: change mapping base to allow guests > 2GB
s390x: Fix debugging for unknown sigp order codes
s390x: build s390x by default
s390x: remove compatibility cc field
s390x: Adjust GDB stub
s390x: translate engine for s390x CPU
s390x: Adjust internal kvm code
s390x: Implement opcode helpers
s390x: helper functions for system emulation
s390x: Shift variables in CPUState for memset(0)
s390x: keep hint on virtio managing size
s390x: make kvm exported functions conditional on kvm
s390x: s390x-linux-user support
tcg: extend max tcg opcodes when using 64-on-32bit
s390x: fix smp support for kvm
tb_invalidate_page_range() was intended to be used to invalidate an
area of a TB which the guest explicitly flushes from i-cache. However,
QEMU detects writes to code areas where TBs have been generated, so
his has never been useful.
Delete the function, adjust callers.
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
This patch adds support for running s390x binaries in the linux-user emulation
code.
Signed-off-by: Ulrich Hecht <uli@suse.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
Add support to the linux-user qemu for the -version command line
option, bringing it into line with the system emulation qemu.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@nokia.com>
Correct ldrexd and strexd code to always read and write the
high word of the 64-bit value from addr+4.
Also make ldrexd and strexd agree that for a 64 bit value the
address in env->exclusive_addr is that of the low word.
This fixes the issues reported in
https://bugs.launchpad.net/qemu/+bug/670883
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Nathan Froyd <froydnj@codesourcery.com>
Running programs that create large numbers of threads, such as this
snippet from libstdc++'s pthread7-rope.cc:
const int max_thread_count = 4;
const int max_loop_count = 10000;
...
for (int j = 0; j < max_loop_count; j++)
{
...
for (int i = 0; i < max_thread_count; i++)
pthread_create (&tid[i], NULL, thread_main, 0);
for (int i = 0; i < max_thread_count; i++)
pthread_join (tid[i], NULL);
}
in user-mode emulation will quickly run out of memory. This is caused
by a failure to free memory in do_syscall prior to thread exit:
/* TODO: Free CPU state. */
pthread_exit(NULL);
The first step in fixing this is to make all TaskStates used by QEMU
dynamically allocated. The TaskState used by the initial thread was
not, as it was allocated on main's stack. So fix that, free the
cpu_env, free the TaskState, and we're home free, right?
Not exactly. When we create a thread, we do:
ts = qemu_mallocz(sizeof(TaskState) + NEW_STACK_SIZE);
...
new_stack = ts->stack;
...
ret = pthread_attr_setstack(&attr, new_stack, NEW_STACK_SIZE);
If we blindly free the TaskState, then, we yank the current (host)
thread's stack out from underneath it while it still has things to do,
like calling pthread_exit. That causes problems, as you might expect.
The solution adopted here is to let the C library allocate the thread's
stack (so the C library can properly clean it up at pthread_exit) and
provide a hint that we want NEW_STACK_SIZE bytes of stack.
With those two changes, we're done, right? Well, almost. You see,
we're creating all these host threads and their parent threads never
bother to check that their children are finished. There's no good place
for the parent threads to do so. Therefore, we need to create the
threads in a detached state so the parent thread doesn't have to call
pthread_join on the child to release the child's resources; the child
does so automatically.
With those three major changes, we can comfortably run programs like the
above without exhausting memory. We do need to delete 'stack' from the
TaskState structure.
Signed-off-by: Nathan Froyd <froydnj@codesourcery.com>
Signed-off-by: Riku Voipio <riku.voipio@nokia.com>
An empty environment is sometimes useful in user mode.
The new option provides it for linux-user and bsd-user
(darwin-user still has no environment related options).
The patch also adds the documentation for other
environment related options.
Signed-off-by: Stefan Weil <weil@mail.berlios.de>
As it is done for qemu-system with "-cpu ?", when cpu_list_id() is missing
for a target, call cpu_list() instead.
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
This will allow backends to make intelligent choices about how
to implement GUEST_BASE.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Alpha passes oldset by value in a register, and returns the newset
as the return value; as compared to the standard implementation in
which both are passed by reference. This requires being able to
distinguish negative return values that are not errors. Do this in
the same way as the Alpha Linux kernel, by storing a zero in V0 in
the implementation of the syscall.
At the same time, fix a think-o in the regular sigprocmask path in
which we passed the target, rather than the host, HOW value.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
rlim_t conversion between host and target added.
Otherwise there are some incorrect case like
- RLIM_INFINITY on 32bit target -> 64bit host.
- RLIM_INFINITY on 64bit host -> mips and sparc target ?
- Big value(for 32bit target) on 64bit host -> 32bit target.
One is added into getrlimit, setrlimit, and ugetrlimit. It converts both
RLIM_INFINITY and value bigger than target can hold(>31bit) to RLIM_INFINITY.
Another one is added to guest_stack_size calculation introduced by
703e0e89. The rule is mostly same except the result on the case is keeping
the value of guest_stack_size.
Slightly tested for SH4, and x86_64 -linux-user on x86_64-pc-linux host.
Signed-off-by: Takashi YOSHII <takasi-y@ops.dti.ne.jp>
Acked-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Use an exception plus start_exclusive to implement the compare-and-swap.
This follows the example set by the MIPS and PPC ports.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
This is a per-cpu flag; there's no need for a spinlock of any kind.
We were also failing to manipulate the flag with $31 as a target reg
and failing to clear the flag on execution of a return-from-interrupt
instruction.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Arrange various declarations so that also non-CPU code can access
them, adjust users.
Move CPU specific code to cpus.c.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
The current default stack limit of 512kB is far too small; a fair
number of gcc testsuite failures (for all guests) are directly
attributable to this. Using the -s option in every invocation of
the emulator is annoying to say the least.
A reasonable compromise seems to be to honor the system rlimit.
At least on two Linux distributions, this is set to 8MB and 10MB
respectively. If the system does not limit the stack, then we're
no worse off than before.
At the same time, rename the variable from x86_stack_size and
change the ultimate fallback size from 512kB to 8MB.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Don't return addresses that aren't properly aligned for the guest,
e.g. when the guest has a larger page size than the host. Don't
return addresses that are outside the virtual address space for the
target, by paying proper attention to the h2g/g2h macros.
At the same time, place the default mapping base for 64-bit guests
(on 64-bit hosts) outside the low 4G. Consistently interpret
mmap_next_start in the guest address space.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Move userland PALcode handling into linux-user main loop so that
we can send signals from there. This also makes alpha_palcode.c
system-level only, so don't build it for userland. Add defines
for GENTRAP PALcall mapping to signals.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
The existing set of IPRs is totally irrelevant to user-mode emulation.
Indeed, they most are irrelevant to implementing kernel-mode emulation,
and would only be relevant to PAL-mode emulation, which I suspect that
no one will ever attempt.
Reducing the set of processor registers reduces the size of the CPU state.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
This is a reimplementation of prior versions which adds
the ability to define cpu models for contemporary processors.
The added models are likewise selected via -cpu <name>,
and are intended to displace the existing convention
of "-cpu qemu64" augmented with a series of feature flags.
A primary motivation was determination of a least common
denominator within a given processor class to simplify guest
migration. It is still possible to modify an arbitrary model
via additional feature flags however the goal here was to
make doing so unnecessary in typical usage. The other
consideration was providing models names reflective of
current processors. Both AMD and Intel have reviewed the
models in terms of balancing generality of migration vs.
excessive feature downgrade relative to released silicon.
This version of the patch replaces the prior hard wired
definitions with a configuration file approach for new
models. Existing models are thus far left as-is but may
easily be transitioned to (or may be overridden by) the
configuration file representation.
Proposed new model definitions are provided here for current
AMD and Intel processors. Each model consists of a name
used to select it on the command line (-cpu <name>), and a
model_id which corresponds to a least common denominator
commercial instance of the processor class.
A table of names/model_ids may be queried via "-cpu ?model":
:
x86 Opteron_G3 AMD Opteron 23xx (Gen 3 Class Opteron)
x86 Opteron_G2 AMD Opteron 22xx (Gen 2 Class Opteron)
x86 Opteron_G1 AMD Opteron 240 (Gen 1 Class Opteron)
x86 Nehalem Intel Core i7 9xx (Nehalem Class Core i7)
x86 Penryn Intel Core 2 Duo P9xxx (Penryn Class Core 2)
x86 Conroe Intel Celeron_4x0 (Conroe/Merom Class Core 2)
:
Also added is "-cpu ?dump" which exhaustively outputs all config
data for all defined models, and "-cpu ?cpuid" which enumerates
all qemu recognized CPUID feature flags.
The pseudo cpuid flag 'check' when added to the feature flag list
will warn when feature flags (either implicit in a cpu model or
explicit on the command line) would have otherwise been quietly
unavailable to a guest:
# qemu-system-x86_64 ... -cpu Nehalem,check
warning: host cpuid 0000_0001 lacks requested flag 'sse4.2|sse4_2' [0x00100000]
warning: host cpuid 0000_0001 lacks requested flag 'popcnt' [0x00800000]
A similar 'enforce' pseudo flag exists which in addition
to the above causes qemu to error exit if requested flags are
unavailable.
Configuration data for a cpu model resides in the target config
file which by default will be installed as:
/usr/local/etc/qemu/target-<arch>.conf
The format of this file should be self explanatory given the
definitions for the above six models and essentially mimics
the structure of the static x86_def_t x86_defs.
Encoding of cpuid flags names now allows aliases for both the
configuration file and the command line which reconciles some
Intel/AMD/Linux/Qemu naming differences.
This patch was tested relative to qemu.git.
Signed-off-by: john cooper <john.cooper@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
For what I know DCR is always 32 bits wide, so we should also use uint32_t to
pass it along the stacks.
This fixes a warning when compiling qemu-system-ppc64 with KVM enabled, making
it compile without --disable-werror
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Fix the alternate time base the same way as the default timebase. SPR_ATBL
should return a 64-bit value on 64 bit implementations.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
On PPC we have a 64-bit time base. Usually (PPC32) this is accessed using
two separate 32 bit SPR accesses to SPR_TBU and SPR_TBL.
On PPC64 the SPR_TBL register acts as 64 bit though, so we get the full
64 bits as return value. If we only take the lower ones, fine. But Linux
wants to see all 64 bits or it breaks.
This patch makes PPC64 Linux work even after TB crossed the 32-bit boundary,
which usually happened a few seconds after bootup.
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
mmap_lock() can be called while tb_lock() is being held. To
avoid deadlock when one thread is holding mmap_lock and another
tb_lock, _always_ lock first tb_lock().
Signed-off-by: Riku Voipio <riku.voipio@nokia.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
The variable CP0_LLAddr represent the full lladdr, not the actual
register value, which is only part of this value and depends on the
CPU.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
In the very least, a change like this requires discussion on the list.
The naming convention is goofy and it causes a massive merge problem. Something
like this _must_ be presented on the list first so people can provide input
and cope with it.
This reverts commit 99a0949b72.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
While i386, x86_64 and Sparc64/OpenBSD still worked after
df70204db5, Sparc32 and Sparc64 Linux hosts
broke.
Partially revert the commit: make the restored code conditional to
!CONFIG_USER_PIE.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
There is a link hack in linux-user which produces an executable that
looks like PIE, but always has text relocations since all object files
isn't position-independent (compiled without -fpic/-fpie). Dynamic loader
has to do more work to load a binary with text relocations.
The best way to keep this functionality is to build a true PIE without
text relocations.
Signed-off-by: Kirill A. Shutemov <kirill@shutemov.name>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
tl and tsptr of members sparc64 cpu state must be changed
simultaneously to keep trap state window in sync with current
trap level. Currently translation of store to tl does not change
tsptr, which leads to corrupt trap state on corresponding
trap level.
This patch removes tsptr from sparc64 cpu state and replaces
all uses with call to helper routine.
Changes v0->v1:
- reimplemented helper routine with tcg generator
- on cpu reset trap type and pstate are populated with power-on reset
values, including tl=maxtl
Signed-off-by: igor.v.kovalenko@gmail.com
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
We handle conditional stores as an exception so we can ensure that no
other thread is changing memory out from underneath us.
Signed-off-by: Nathan Froyd <froydnj@codesourcery.com>
Signed-off-by: malc <av1474@comtv.ru>
Re-implement GUEST_BASE support.
Offset guest ddress space by default if the guest binary contains
regions below the host mmap_min_addr.
Implement support for i386, x86-64 and arm hosts.
Signed-off-by: Riku Voipio <riku.voipio@iki.fi>
Signed-off-by: Paul Brook <paul@codesourcery.com>
There's a error When doing something like that :
find / -type f -print0 | xargs -0 echo
[ done in a arm chroot with qemu-arm and linux binfmt stuff or with
find / -type f -print0 | qemu-arm -L <path> <path>/usr/bin/xargs -0
echo ]
Doing this outsite qemu is fine. The problem was the huge number of
parameters. Increasing MAX_ARG_PAGES is fixing that.
While I was at it, I've modified linux-user/main.c to report error code
of loader_exec. It helps to debug/know what's wrong.
Signed-off-by: Arnaud Patard <arnaud.patard@rtp-net.org>
Signed-off-by: Riku Voipio <riku.voipio@iki.fi>
When target process is killed with signal (such signal that
should dump core) a coredump file is created. This file is
similar than coredump generated by Linux (there are few exceptions
though).
Riku Voipio: added support for rlimit
Signed-off-by: Mika Westerberg <mika.westerberg@iki.fi>
Signed-off-by: Riku Voipio <riku.voipio@iki.fi>
Implement setup_{,rt_}frame and do_{,rt_}sigreturn for PPC 32-bit. Use
the same TARGET_QEMU_ESIGRETURN hack as for MIPS to avoid clobbering
register state on a sigreturn.
Signed-off-by: Nathan Froyd <froydnj@codesourcery.com>
Signed-off-by: malc <av1474@comtv.ru>
Also fixes a register corruption bug in do_sigreturn. When "returning"
from sigreturn we are actually restoring the virtual cpu state from the
signal frame. This is actually surprisingly hard to observe in practice.
Typically an thread be blocked in a FUTEX_WAIT call when the signal arrives,
so the effect is a spurious syscall success and the introduction of a
subtle race condition.
On x86/arm a syscall modifies a single word sized register, so
do_sigreturn can just return that value. On MIPS a syscall clobbers
multiple registers, so we need additional smarts. My solution is to
invent a magic errno value that means "don't touch CPU state".
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7194 c046a42c-6fe2-441c-8c8c-71466251a162
Added switch -0 (zero) which can be used to pass argv[0] to
target process. The main use is for a binfmt_misc wrapper when
the "P - preserve-argv[0]" setting is used.
From: Mika Westerberg
Signed-off-by: Riku Voipio <riku.voipio@iki.fi>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7115 c046a42c-6fe2-441c-8c8c-71466251a162
Allows distributors to identify their builds without needing to hack the
sources.
Signed-off-by: Paul Brook <paul@codesourcery.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7036 c046a42c-6fe2-441c-8c8c-71466251a162
This replaces a compile time option for some targets and adds
this feature to targets which did not have a compile time option.
Add monitor command to enable or disable single step mode.
Modify monitor command "info status" to display single step mode.
Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7004 c046a42c-6fe2-441c-8c8c-71466251a162
and process termination in legacy applications. Try to guess which we want
based on the presence of multiple threads.
Also implement locking when modifying the CPU list.
Signed-off-by: Paul Brook <paul@codesourcery.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6735 c046a42c-6fe2-441c-8c8c-71466251a162
Fixes qemu-arm|grep cpu - with _exit() getting output from qemu --help
is a bit random. Since no atexit() handlers are registered for user mode
emulation, just use exit() instead.
Signed-off-by: Riku Voipio <riku.voipio@iki.fi>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6657 c046a42c-6fe2-441c-8c8c-71466251a162
Some applications like to test /proc/self/exe to find
out who they are. Fake the result of readlink() for
them. Use realpath() to return full path to binary
(which the links /proc/self/exe are)
Signed-off-by: Riku Voipio <riku.voipio@iki.fi>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6485 c046a42c-6fe2-441c-8c8c-71466251a162
Adds support for qemu to modify target process environment
variables using -E and -U commandline switches. This replaces
eventually the -drop-ld-preload flag.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Riku Voipio <riku.voipio@iki.fi>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6484 c046a42c-6fe2-441c-8c8c-71466251a162
This is a large patch that changes all occurrences of logfile/loglevel
global variables to use the new qemu_log*() macros.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6338 c046a42c-6fe2-441c-8c8c-71466251a162
Close gdbserver in child processes, so that only one stub tries to talk
to GDB at a time. Updated from an earlier patch by Paul Brook.
Signed-off-by: Daniel Jacobowitz <dan@codesourcery.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6095 c046a42c-6fe2-441c-8c8c-71466251a162
Built on top of previously enhanced breakpoint/watchpoint support, this
patch adds full debug register emulation for the x86 architecture.
Many corner cases were considered, and the result was successfully
tested inside a Linux guest with gdb, but I won't be surprised if one
or two scenarios still behave differently in reality.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5747 c046a42c-6fe2-441c-8c8c-71466251a162
Replace POWERPC_EXCP_DEBUG by EXCP_DEBUG as the former can not happen in
user mode emulation, while the later can happen and should be handled.
Noticed by Andrew Stubbs.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5721 c046a42c-6fe2-441c-8c8c-71466251a162
env->*dt.base should fit target address space, so we should use
target_mmap to allocate them.
Signed-off-by: Kirill A. Shutemov <kirill@shutemov.name>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5666 c046a42c-6fe2-441c-8c8c-71466251a162
p in this case is uint32_t *
e1/e2 are unsigned ints initialized from arithmetics performed on
unsigned longs
The mistake was, probably, never noticed due to the absence of any
big endian linux-user host. The types e1/e2 and p begs the quesiton
why this function takes longs at all.
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5036 c046a42c-6fe2-441c-8c8c-71466251a162
