In qemu_gluster_parse_json(), the call to qdict_array_entries()
could return a negative error code, which we were ignoring
because we assigned the result to an unsigned variable.
Fix this by using the 'int' type instead, which matches the
return type of qdict_array_entries() and also the type
we use for the loop enumeration variable 'i'.
(Spotted by Coverity, CID 1360960.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Message-id: 1496682098-1540-1-git-send-email-peter.maydell@linaro.org
Signed-off-by: Jeff Cody <jcody@redhat.com>
Add missing support for "preallocation=falloc" to the Gluster block
driver. This change bases its logic on that of block/file-posix.c and
removed the gluster_supports_zerofill() and qemu_gluster_zerofill()
functions in favour of #ifdef checks in an easy to read
switch-statement.
Both glfs_zerofill() and glfs_fallocate() have been introduced with
GlusterFS 3.5.0 (pkg-config glusterfs-api = 6). A #define for the
availability of glfs_fallocate() has been added to ./configure.
Reported-by: Satheesaran Sundaramoorthi <sasundar@redhat.com>
Signed-off-by: Niels de Vos <ndevos@redhat.com>
Message-id: 20170528063114.28691-1-ndevos@redhat.com
URL: https://bugzilla.redhat.com/1450759
Signed-off-by: Niels de Vos <ndevos@redhat.com>
Signed-off-by: Jeff Cody <jcody@redhat.com>
On current released versions of glusterfs, glfs_lseek() will sometimes
return invalid values for SEEK_DATA or SEEK_HOLE. For SEEK_DATA and
SEEK_HOLE, the returned value should be >= the passed offset, or < 0 in
the case of error:
LSEEK(2):
off_t lseek(int fd, off_t offset, int whence);
[...]
SEEK_HOLE
Adjust the file offset to the next hole in the file greater
than or equal to offset. If offset points into the middle of
a hole, then the file offset is set to offset. If there is no
hole past offset, then the file offset is adjusted to the end
of the file (i.e., there is an implicit hole at the end of
any file).
[...]
RETURN VALUE
Upon successful completion, lseek() returns the resulting
offset location as measured in bytes from the beginning of the
file. On error, the value (off_t) -1 is returned and errno is
set to indicate the error
However, occasionally glfs_lseek() for SEEK_HOLE/DATA will return a
value less than the passed offset, yet greater than zero.
For instance, here are example values observed from this call:
offs = glfs_lseek(s->fd, start, SEEK_HOLE);
if (offs < 0) {
return -errno; /* D1 and (H3 or H4) */
}
start == 7608336384
offs == 7607877632
This causes QEMU to abort on the assert test. When this value is
returned, errno is also 0.
This is a reported and known bug to glusterfs:
https://bugzilla.redhat.com/show_bug.cgi?id=1425293
Although this is being fixed in gluster, we still should work around it
in QEMU, given that multiple released versions of gluster behave this
way.
This patch treats the return case of (offs < start) the same as if an
error value other than ENXIO is returned; we will assume we learned
nothing, and there are no holes in the file.
Signed-off-by: Jeff Cody <jcody@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Niels de Vos <ndevos@redhat.com>
Message-id: 87c0140e9407c08f6e74b04131b610f2e27c014c.1495560397.git.jcody@redhat.com
Signed-off-by: Jeff Cody <jcody@redhat.com>
Add missing error messages for the block driver implementations of
.bdrv_truncate(); drop the generic one from block.c's bdrv_truncate().
Since one of these changes touches a mis-indented block in
block/file-posix.c, this patch fixes that coding style issue along the
way.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20170328205129.15138-5-mreitz@redhat.com
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Add an Error parameter to the block drivers' bdrv_truncate() interface.
If a block driver does not set this in case of an error, the generic
bdrv_truncate() implementation will do so.
Where it is obvious, this patch also makes some block drivers set this
value.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20170328205129.15138-4-mreitz@redhat.com
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Note that the new variants are impossible in qemu_gluster_glfs_init(),
because the gconf->server can only come from qemu_gluster_parse_uri()
or qemu_gluster_parse_json(), and neither can create anything but
'inet' or 'unix'.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 1490895797-29094-7-git-send-email-armbru@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
qemu_gluster_glfs_init() and qemu_gluster_parse_json() rely on the
fact that SocketAddressFlatType has only two members
SOCKET_ADDRESS_FLAT_TYPE_INET and SOCKET_ADDRESS_FLAT_TYPE_UNIX.
Correct, but won't stay correct. Make them more robust.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Message-id: 1490895797-29094-6-git-send-email-armbru@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
QAPI type SocketAddressFlat differs from SocketAddress pointlessly:
the discriminator value for variant InetSocketAddress is 'tcp' instead
of 'inet'. Rename.
The type is so far only used by the Gluster block drivers. Take care
to keep 'tcp' working in things like -drive's file.server.0.type=tcp.
The "gluster+tcp" URI scheme in pseudo-filenames stays the same.
blockdev-add changes, but it has changed incompatibly since 2.8
already.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
As its documentation says, it's not specific to Gluster. Rename it,
as I'm going to use it for something else.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
To reproduce, run
$ valgrind qemu-system-x86_64 --nodefaults -S --drive driver=gluster,volume=testvol,path=/a/b/c,server.0.type=xxx
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Niels de Vos <ndevos@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
qemu_gluster_glfs_init() passes the names of QAPI enumeration type
SocketTransport to glfs_set_volfile_server(). Works, because they
were chosen to match. But the coupling is artificial. Use the
appropriate literal strings instead.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Niels de Vos <ndevos@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 20170213135235.12274-15-pbonzini@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
These files deal with the file protocol, not the raw format (the
file protocol is often used with other formats, and the raw
format is not forced to use the file protocol). Rename things
to make it a bit easier to follow.
Suggested-by: Daniel P. Berrange <berrange@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The QMP definition of BlockdevOptionsGluster:
{ 'struct': 'BlockdevOptionsGluster',
'data': { 'volume': 'str',
'path': 'str',
'server': ['GlusterServer'],
'*debug-level': 'int',
'*logfile': 'str' } }
But instead of 'debug-level we have exported 'debug' as the option for choosing
debug level of gluster protocol driver.
This patch fix QMP definition BlockdevOptionsGluster
s/debug-level/debug/
Suggested-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Prasanna Kumar Kalever <prasanna.kalever@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Jeff Cody <jcody@redhat.com>
This fixes a use-after-free bug introduced in commit 6349c154. We need
to use QLIST_FOREACH_SAFE() when freeing elements in the loop. Spotted
by Coverity.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-id: 1479378608-11962-1-git-send-email-kwolf@redhat.com
Signed-off-by: Jeff Cody <jcody@redhat.com>
After introduction of qapi schema in gluster block driver code, the port
type is now string as per InetSocketAddress
{ 'struct': 'InetSocketAddress',
'data': {
'host': 'str',
'port': 'str',
'*to': 'uint16',
'*ipv4': 'bool',
'*ipv6': 'bool' } }
but the current code still treats it as QEMU_OPT_NUMBER, hence fixing port
to accept QEMU_OPT_STRING.
Suggested-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Prasanna Kumar Kalever <prasanna.kalever@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Jeff Cody <jcody@redhat.com>
using atoi() for converting string to int may be error prone in case if
string supplied in the argument is not a fold of numerical number,
This is not a bug because in the existing code,
static QemuOptsList runtime_tcp_opts = {
.name = "gluster_tcp",
.head = QTAILQ_HEAD_INITIALIZER(runtime_tcp_opts.head),
.desc = {
...
{
.name = GLUSTER_OPT_PORT,
.type = QEMU_OPT_NUMBER,
.help = "port number ...",
},
...
};
port type is QEMU_OPT_NUMBER, before we actually reaches atoi() port is already
defended by parse_option_number()
However It is a good practice to use function like parse_uint_full()
over atoi() to keep port self defended
Note: As now the port string to int conversion has its defence code set,
and also we understand that port argument is actually a string type,
in the follow up patch let's move port type from QEMU_OPT_NUMBER to
QEMU_OPT_STRING
[Jeff Cody: removed spurious parenthesis]
Signed-off-by: Prasanna Kumar Kalever <prasanna.kalever@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Jeff Cody <jcody@redhat.com>
Currently, for every drive accessed via gfapi we create a new glfs
instance (call glfs_new() followed by glfs_init()) which could consume
memory in few 100 MB's, from the table below it looks like for each
instance ~300 MB VSZ was consumed
Before:
-------
Disks VSZ RSS
1 1098728 187756
2 1430808 198656
3 1764932 199704
4 2084728 202684
This patch maintains a list of pre-opened glfs objects. On adding
a new drive belonging to the same gluster volume, we just reuse the
existing glfs object by updating its refcount.
With this approch we shrink up the unwanted memory consumption and
glfs_new/glfs_init calls for accessing a disk (file) if belongs to
same volume.
From below table notice that the memory usage after adding a disk
(which will reuse the existing glfs object hence) is in negligible
compared to before.
After:
------
Disks VSZ RSS
1 1101964 185768
2 1109604 194920
3 1114012 196036
4 1114496 199868
Disks: number of -drive
VSZ: virtual memory size of the process in KiB
RSS: resident set size, the non-swapped physical memory (in kiloBytes)
VSZ and RSS are analyzed using 'ps aux' utility.
Signed-off-by: Prasanna Kumar Kalever <prasanna.kalever@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Message-id: 1477581890-4811-1-git-send-email-prasanna.kalever@redhat.com
Signed-off-by: Jeff Cody <jcody@redhat.com>
Add checks to see if the system compiling QEMU has support for
SEEK_HOLE/SEEK_DATA. If the system does not, we will flag that seek
data is unsupported in gluster.
Note: this is not a check on whether the gluster server itself supports
SEEK_DATA (that is already done during runtime), but rather if the
compilation environment supports SEEK_DATA.
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Jeff Cody <jcody@redhat.com>
Tested-by: Eric Blake <eblake@redhat.com>
Message-id: 00370bce5c98140d6c56ad5145635ec6551265cc.1475876377.git.jcody@redhat.com
Signed-off-by: Jeff Cody <jcody@redhat.com>
This simplifies bottom half handlers by removing calls to qemu_bh_delete and
thus removing the need to stash the bottom half pointer in the opaque
datum.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
currently all the libgfapi logs defaults to '/dev/stderr' as it was hardcoded
in a call to glfs logging api. When the debug level is chosen to DEBUG/TRACE,
gfapi logs will be huge and fill/overflow the console view.
This patch provides a commandline option to mention log file path which helps
in logging to the specified file and also help in persisting the gfapi logs.
Usage:
-----
*URI Style:
---------
-drive file=gluster://hostname/volname/image.qcow2,file.debug=9,\
file.logfile=/var/log/qemu/qemu-gfapi.log
*JSON Style:
----------
'json:{
"driver":"qcow2",
"file":{
"driver":"gluster",
"volume":"volname",
"path":"image.qcow2",
"debug":"9",
"logfile":"/var/log/qemu/qemu-gfapi.log",
"server":[
{
"type":"tcp",
"host":"1.2.3.4",
"port":24007
},
{
"type":"unix",
"socket":"/var/run/glusterd.socket"
}
]
}
}'
Reviewed-by: Jeff Cody <jcody@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Prasanna Kumar Kalever <prasanna.kalever@redhat.com>
Signed-off-by: Jeff Cody <jcody@redhat.com>
Another step towards killing off sector-based block APIs.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 1468624988-423-12-git-send-email-eblake@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This patch adds a way to specify multiple volfile servers to the gluster
block backend of QEMU with tcp|rdma transport types and their port numbers.
Problem:
Currently VM Image on gluster volume is specified like this:
file=gluster[+tcp]://host[:port]/testvol/a.img
Say we have three hosts in a trusted pool with replica 3 volume in action.
When the host mentioned in the command above goes down for some reason,
the other two hosts are still available. But there's currently no way
to tell QEMU about them.
Solution:
New way of specifying VM Image on gluster volume with volfile servers:
(We still support old syntax to maintain backward compatibility)
Basic command line syntax looks like:
Pattern I:
-drive driver=gluster,
volume=testvol,path=/path/a.raw,[debug=N,]
server.0.type=tcp,
server.0.host=1.2.3.4,
server.0.port=24007,
server.1.type=unix,
server.1.socket=/path/socketfile
Pattern II:
'json:{"driver":"qcow2","file":{"driver":"gluster",
"volume":"testvol","path":"/path/a.qcow2",["debug":N,]
"server":[{hostinfo_1}, ...{hostinfo_N}]}}'
driver => 'gluster' (protocol name)
volume => name of gluster volume where our VM image resides
path => absolute path of image in gluster volume
[debug] => libgfapi loglevel [(0 - 9) default 4 -> Error]
{hostinfo} => {{type:"tcp",host:"1.2.3.4"[,port=24007]},
{type:"unix",socket:"/path/sockfile"}}
type => transport type used to connect to gluster management daemon,
it can be tcp|unix
host => host address (hostname/ipv4/ipv6 addresses/socket path)
port => port number on which glusterd is listening.
socket => path to socket file
Examples:
1.
-drive driver=qcow2,file.driver=gluster,
file.volume=testvol,file.path=/path/a.qcow2,file.debug=9,
file.server.0.type=tcp,
file.server.0.host=1.2.3.4,
file.server.0.port=24007,
file.server.1.type=unix,
file.server.1.socket=/var/run/glusterd.socket
2.
'json:{"driver":"qcow2","file":{"driver":"gluster","volume":"testvol",
"path":"/path/a.qcow2","debug":9,"server":
[{"type":"tcp","host":"1.2.3.4","port":"24007"},
{"type":"unix","socket":"/var/run/glusterd.socket"}
]}}'
This patch gives a mechanism to provide all the server addresses, which are in
replica set, so in case host1 is down VM can still boot from any of the
active hosts.
This is equivalent to the backup-volfile-servers option supported by
mount.glusterfs (FUSE way of mounting gluster volume)
credits: sincere thanks to all the supporters
Signed-off-by: Prasanna Kumar Kalever <prasanna.kalever@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-id: 1468947453-5433-6-git-send-email-prasanna.kalever@redhat.com
Signed-off-by: Jeff Cody <jcody@redhat.com>
this patch adds 'GlusterServer' related schema in qapi/block-core.json
[Jeff: minor fix-ups of comments and formatting, per patch reviews]
Signed-off-by: Prasanna Kumar Kalever <prasanna.kalever@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 1468947453-5433-5-git-send-email-prasanna.kalever@redhat.com
Signed-off-by: Jeff Cody <jcody@redhat.com>
gluster volfile server fetch happens through unix and/or tcp, it doesn't
support volfile fetch over rdma. The rdma code may actually mislead,
so to make sure things do not break, for now we fallback to tcp when requested
for rdma, with a warning.
If you are wondering how this worked all these days, its the gluster libgfapi
code which handles anything other than unix transport as socket/tcp, sad but
true.
Also gluster doesn't support ipv6 addresses, removing the ipv6 related
comments/docs section
[Jeff: Minor grammatical fixes in comments and commit message, per
review comments]
Signed-off-by: Prasanna Kumar Kalever <prasanna.kalever@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Message-id: 1468947453-5433-4-git-send-email-prasanna.kalever@redhat.com
Signed-off-by: Jeff Cody <jcody@redhat.com>
unified coding styles of multiline function arguments and other error functions
moved random declarations of structures and other list variables
Signed-off-by: Prasanna Kumar Kalever <prasanna.kalever@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Message-id: 1468947453-5433-3-git-send-email-prasanna.kalever@redhat.com
Signed-off-by: Jeff Cody <jcody@redhat.com>
A future patch will add support for multiple gluster servers. Existing
terminology is a bit unusual in relation to what names are used by
other networked devices, and doesn't map very well to the terminology
we expect to use for multiple servers. Therefore, rename the following
options:
'server' -> 'host'
'image' -> 'path'
'volname' -> 'volume'
Signed-off-by: Prasanna Kumar Kalever <prasanna.kalever@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Message-id: 1468947453-5433-2-git-send-email-prasanna.kalever@redhat.com
Signed-off-by: Jeff Cody <jcody@redhat.com>
In practice the entry argument is always known at creation time, and
it is confusing that sometimes qemu_coroutine_enter is used with a
non-NULL argument to re-enter a coroutine (this happens in
block/sheepdog.c and tests/test-coroutine.c). So pass the opaque value
at creation time, for consistency with e.g. aio_bh_new.
Mostly done with the following semantic patch:
@ entry1 @
expression entry, arg, co;
@@
- co = qemu_coroutine_create(entry);
+ co = qemu_coroutine_create(entry, arg);
...
- qemu_coroutine_enter(co, arg);
+ qemu_coroutine_enter(co);
@ entry2 @
expression entry, arg;
identifier co;
@@
- Coroutine *co = qemu_coroutine_create(entry);
+ Coroutine *co = qemu_coroutine_create(entry, arg);
...
- qemu_coroutine_enter(co, arg);
+ qemu_coroutine_enter(co);
@ entry3 @
expression entry, arg;
@@
- qemu_coroutine_enter(qemu_coroutine_create(entry), arg);
+ qemu_coroutine_enter(qemu_coroutine_create(entry, arg));
@ reentry @
expression co;
@@
- qemu_coroutine_enter(co, NULL);
+ qemu_coroutine_enter(co);
except for the aforementioned few places where the semantic patch
stumbled (as expected) and for test_co_queue, which would otherwise
produce an uninitialized variable warning.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This adds commandline support for the logging level of the
gluster protocol driver, output to stdout. The option is 'debug',
e.g.:
-drive filename=gluster://192.168.15.180/gv2/test.qcow2,debug=9
Debug levels are 0-9, with 9 being the most verbose, and 0 representing
no debugging output. The default is the same as it was before, which
is a level of 4. The current logging levels defined in the gluster
source are:
0 - None
1 - Emergency
2 - Alert
3 - Critical
4 - Error
5 - Warning
6 - Notice
7 - Info
8 - Debug
9 - Trace
(From: glusterfs/logging.h)
Reviewed-by: Niels de Vos <ndevos@redhat.com>
Signed-off-by: Jeff Cody <jcody@redhat.com>
GlusterFS 3.8 contains support for SEEK_DATA and SEEK_HOLE. This makes
it possible to detect sparse areas in files.
Signed-off-by: Niels de Vos <ndevos@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Another step on our continuing quest to switch to byte-based
interfaces.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Upon receiving an I/O error after an fsync, by default gluster will
dump its cache. However, QEMU will retry the fsync, which is especially
useful when encountering errors such as ENOSPC when using the werror=stop
option. When using caching with gluster, however, the last written data
will be lost upon encountering ENOSPC. Using the write-behind-cache
xlator option of 'resync-failed-syncs-after-fsync' should cause gluster
to retain the cached data after a failed fsync, so that ENOSPC and other
transient errors are recoverable.
Unfortunately, we have no way of knowing if the
'resync-failed-syncs-after-fsync' xlator option is supported, so for now
close the fd and set the BDS driver to NULL upon fsync error.
Signed-off-by: Jeff Cody <jcody@redhat.com>
Move qemu_gluster_close() further up in the file, in preparation
for the next patch, to avoid a forward declaration.
Signed-off-by: Jeff Cody <jcody@redhat.com>
Upon error, gluster will call the aio callback function with a
ret value of -1, with errno set to the proper error value. If
we set the acb->ret value to the return value in the callback,
that results in every error being EPERM (i.e. 1). Instead, set
it to the proper error result.
Reviewed-by: Niels de Vos <ndevos@redhat.com>
Signed-off-by: Jeff Cody <jcody@redhat.com>
Commit 57cb38b included qapi/error.h into qemu/osdep.h to get the
Error typedef. Since then, we've moved to include qemu/osdep.h
everywhere. Its file comment explains: "To avoid getting into
possible circular include dependencies, this file should not include
any other QEMU headers, with the exceptions of config-host.h,
compiler.h, os-posix.h and os-win32.h, all of which are doing a
similar job to this file and are under similar constraints."
qapi/error.h doesn't do a similar job, and it doesn't adhere to
similar constraints: it includes qapi-types.h. That's in excess of
100KiB of crap most .c files don't actually need.
Add the typedef to qemu/typedefs.h, and include that instead of
qapi/error.h. Include qapi/error.h in .c files that need it and don't
get it now. Include qapi-types.h in qom/object.h for uint16List.
Update scripts/clean-includes accordingly. Update it further to match
reality: replace config.h by config-target.h, add sysemu/os-posix.h,
sysemu/os-win32.h. Update the list of includes in the qemu/osdep.h
comment quoted above similarly.
This reduces the number of objects depending on qapi/error.h from "all
of them" to less than a third. Unfortunately, the number depending on
qapi-types.h shrinks only a little. More work is needed for that one.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
[Fix compilation without the spice devel packages. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Clean up includes so that osdep.h is included first and headers
which it implies are not included manually.
This commit was created with scripts/clean-includes.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This is simpler now that the driver has been converted to coroutines.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Jeff Cody <jcody@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
and avoid converting it back later.
Signed-off-by: Hu Tao <hutao@cn.fujitsu.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Benoît Canet <benoit.canet@nodalink.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Currently the file size requested by user is rounded down to nearest
sector, causing the actual file size could be a bit less than the size
user requested. Since some formats (like qcow2) record virtual disk
size in bytes, this can make the last few bytes cannot be accessed.
This patch fixes it by rounding up file size to nearest sector so that
the actual file size is no less than the requested file size.
Signed-off-by: Hu Tao <hutao@cn.fujitsu.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
g_new(T, n) is neater than g_malloc(sizeof(T) * n). It's also safer,
for two reasons. One, it catches multiplication overflowing size_t.
Two, it returns T * rather than void *, which lets the compiler catch
more type errors.
Patch created with Coccinelle, with two manual changes on top:
* Add const to bdrv_iterate_format() to keep the types straight
* Convert the allocation in bdrv_drop_intermediate(), which Coccinelle
inexplicably misses
Coccinelle semantic patch:
@@
type T;
@@
-g_malloc(sizeof(T))
+g_new(T, 1)
@@
type T;
@@
-g_try_malloc(sizeof(T))
+g_try_new(T, 1)
@@
type T;
@@
-g_malloc0(sizeof(T))
+g_new0(T, 1)
@@
type T;
@@
-g_try_malloc0(sizeof(T))
+g_try_new0(T, 1)
@@
type T;
expression n;
@@
-g_malloc(sizeof(T) * (n))
+g_new(T, n)
@@
type T;
expression n;
@@
-g_try_malloc(sizeof(T) * (n))
+g_try_new(T, n)
@@
type T;
expression n;
@@
-g_malloc0(sizeof(T) * (n))
+g_new0(T, n)
@@
type T;
expression n;
@@
-g_try_malloc0(sizeof(T) * (n))
+g_try_new0(T, n)
@@
type T;
expression p, n;
@@
-g_realloc(p, sizeof(T) * (n))
+g_renew(T, p, n)
@@
type T;
expression p, n;
@@
-g_try_realloc(p, sizeof(T) * (n))
+g_try_renew(T, p, n)
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Now that all backend drivers are using QemuOpts, remove all
QEMUOptionParameter related codes.
Signed-off-by: Dong Xu Wang <wdongxu@linux.vnet.ibm.com>
Signed-off-by: Chunyan Liu <cyliu@suse.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Dong Xu Wang <wdongxu@linux.vnet.ibm.com>
Signed-off-by: Chunyan Liu <cyliu@suse.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Drop the assumption that we're using the main AioContext. Use
aio_bh_new() instead of qemu_bh_new().
The .bdrv_detach_aio_context() and .bdrv_attach_aio_context() interfaces
are not needed since no fd handlers, timers, or BHs stay registered when
requests have been drained.
Cc: Bharata B Rao <bharata@linux.vnet.ibm.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The docs for glfs_init suggest that the function sets errno on every
failure. In fact it doesn't. As other functions such as
qemu_gluster_open() in the gluster block code report their errors based
on this fact we need to make sure that errno is set on each failure.
This fixes a crash of qemu-img/qemu when a gluster brick isn't
accessible from given host while the server serving the volume
description is.
Thread 1 (Thread 0x7ffff7fba740 (LWP 203880)):
#0 0x00007ffff77673f8 in glfs_lseek () from /usr/lib64/libgfapi.so.0
#1 0x0000555555574a68 in qemu_gluster_getlength ()
#2 0x0000555555565742 in refresh_total_sectors ()
#3 0x000055555556914f in bdrv_open_common ()
#4 0x000055555556e8e8 in bdrv_open ()
#5 0x000055555556f02f in bdrv_open_image ()
#6 0x000055555556e5f6 in bdrv_open ()
#7 0x00005555555c5775 in bdrv_new_open ()
#8 0x00005555555c5b91 in img_info ()
#9 0x00007ffff62c9c05 in __libc_start_main () from /lib64/libc.so.6
#10 0x00005555555648ad in _start ()
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Remove the definitions of GLUSTER_FD_WRITE and GLUSTER_FD_READ which are
no longer used. Also sockets.h isn't needed any more.
Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Pipe handling mechanism in gluster driver was based on similar implementation
in RBD driver and hence had GPLv2 and associated copyright information.
After changing gluster driver to coroutine based implementation, the pipe
handling code no longer exists and hence change gluster driver's licence to
GPLv2+ and remove RBD copyrights.
Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
