It is possible that one of the multifd channels fails to be created at
multifd_new_send_channel_async() while the rest of the channel
creation tasks are still in flight.
This could lead to multifd_save_cleanup() executing the
qemu_thread_join() loop too early and not waiting for the threads
which haven't been created yet, leading to the freeing of resources
that the newly created threads will try to access and crash.
Add a synchronization point after which there will be no attempts at
thread creation and therefore calling multifd_save_cleanup() past that
point will ensure it properly waits for the threads.
A note about performance: Prior to this patch, if a channel took too
long to be established, other channels could finish connecting first
and already start taking load. Now we're bounded by the
slowest-connecting channel.
Reported-by: Avihai Horon <avihaih@nvidia.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Link: https://lore.kernel.org/r/20240206215118.6171-7-farosas@suse.de
Signed-off-by: Peter Xu <peterx@redhat.com>
During multifd channel creation (multifd_send_new_channel_async) when
TLS is enabled, the multifd_channel_connect function is called twice,
once to create the TLS handshake thread and another time after the
asynchrounous TLS handshake has finished.
This creates a slightly confusing call stack where
multifd_channel_connect() is called more times than the number of
channels. It also splits error handling between the two callers of
multifd_channel_connect() causing some code duplication. Lastly, it
gets in the way of having a single point to determine whether all
channel creation tasks have been initiated.
Refactor the code to move the reentrancy one level up at the
multifd_new_send_channel_async() level, de-duplicating the error
handling and allowing for the next patch to introduce a
synchronization point common to all the multifd channel creation,
regardless of TLS.
Note that the previous code would never fail once p->c had been set.
This patch changes this assumption, which affects refcounting, so add
comments around object_unref to explain the situation.
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Link: https://lore.kernel.org/r/20240206215118.6171-6-farosas@suse.de
Signed-off-by: Peter Xu <peterx@redhat.com>
Hide the error handling inside multifd_send_setup to make it cleaner
for the next patch to move the function around.
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Link: https://lore.kernel.org/r/20240206215118.6171-4-farosas@suse.de
Signed-off-by: Peter Xu <peterx@redhat.com>
We currently only need p->running to avoid calling qemu_thread_join()
on a non existent thread if the thread has never been created.
However, there are at least two bugs in this logic:
1) On the sending side, p->running is set too early and
qemu_thread_create() can be skipped due to an error during TLS
handshake, leaving the flag set and leading to a crash when
multifd_send_cleanup() calls qemu_thread_join().
2) During exit, the multifd thread clears the flag while holding the
channel lock. The counterpart at multifd_send_cleanup() reads the flag
outside of the lock and might free the mutex while the multifd thread
still has it locked.
Fix the first issue by setting the flag right before creating the
thread. Rename it from p->running to p->thread_created to clarify its
usage.
Fix the second issue by not clearing the flag at the multifd thread
exit. We don't have any use for that.
Note that these bugs are straight-forward logic issues and not race
conditions. There is still a gap for races to affect this code due to
multifd_send_cleanup() being allowed to run concurrently with the
thread creation loop. This issue is solved in the next patches.
Cc: qemu-stable <qemu-stable@nongnu.org>
Fixes: 2964714015 ("migration/tls: add support for multifd tls-handshake")
Reported-by: Avihai Horon <avihaih@nvidia.com>
Reported-by: chenyuhui5@huawei.com
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Link: https://lore.kernel.org/r/20240206215118.6171-3-farosas@suse.de
Signed-off-by: Peter Xu <peterx@redhat.com>
We're currently leaking the resources of the TLS thread by not joining
it and also overwriting the p->thread pointer altogether.
Fixes: a1af605bd5 ("migration/multifd: fix hangup with TLS-Multifd due to blocking handshake")
Cc: qemu-stable <qemu-stable@nongnu.org>
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Link: https://lore.kernel.org/r/20240206215118.6171-2-farosas@suse.de
Signed-off-by: Peter Xu <peterx@redhat.com>
When reviewing my attempt to refactor send_prepare(), Fabiano suggested we
try out with dropping the mutex in multifd code [1].
I thought about that before but I never tried to change the code. Now
maybe it's time to give it a stab. This only optimizes the sender side.
The trick here is multifd has a clear provider/consumer model, that the
migration main thread publishes requests (either pending_job/pending_sync),
while the multifd sender threads are consumers. Here we don't have a lot
of complicated data sharing, and the jobs can logically be submitted
lockless.
Arm the code with atomic weapons. Two things worth mentioning:
- For multifd_send_pages(): we can use qatomic_load_acquire() when trying
to find a free channel, but that's expensive if we attach one ACQUIRE per
channel. Instead, keep the qatomic_read() on reading the pending_job
flag as we do already, meanwhile use one smp_mb_acquire() after the loop
to guarantee the memory ordering.
- For pending_sync: it doesn't have any extra data required since now
p->flags are never touched, it should be safe to not use memory barrier.
That's different from pending_job.
Provide rich comments for all the lockless operations to state how they are
paired. With that, we can remove the mutex.
[1] https://lore.kernel.org/r/87o7d1jlu5.fsf@suse.de
Suggested-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Link: https://lore.kernel.org/r/20240202102857.110210-24-peterx@redhat.com
Signed-off-by: Peter Xu <peterx@redhat.com>
As reported correctly by Fabiano [1] (while per Fabiano, it sourced back to
Elena's initial report in Oct 2023), MultiFDSendParams.packet_num is buggy
to be assigned and stored. Consider two consequent operations of: (1)
queue a job into multifd send thread X, then (2) queue another sync request
to the same send thread X. Then the MultiFDSendParams.packet_num will be
assigned twice, and the first assignment can get lost already.
To avoid that, we move the packet_num assignment from p->packet_num into
where the thread will fill in the packet. Use atomic operations to protect
the field, making sure there's no race.
Note that atomic fetch_add() may not be good for scaling purposes, however
multifd should be fine as number of threads should normally not go beyond
16 threads. Let's leave that concern for later but fix the issue first.
There's also a trick on how to make it always work even on 32 bit hosts for
uint64_t packet number. Switching to uintptr_t as of now to simply the
case. It will cause packet number to overflow easier on 32 bit, but that
shouldn't be a major concern for now as 32 bit systems is not the major
audience for any performance concerns like what multifd wants to address.
We also need to move multifd_send_state definition upper, so that
multifd_send_fill_packet() can reference it.
[1] https://lore.kernel.org/r/87o7d1jlu5.fsf@suse.de
Reported-by: Elena Ufimtseva <elena.ufimtseva@oracle.com>
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Link: https://lore.kernel.org/r/20240202102857.110210-23-peterx@redhat.com
Signed-off-by: Peter Xu <peterx@redhat.com>
Most of the multifd code uses send/recv to represent the two sides, but
some rare cases use save/load.
Since send/recv is the majority, replacing the save/load use cases to use
send/recv globally. Now we reach a consensus on the naming.
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Link: https://lore.kernel.org/r/20240202102857.110210-22-peterx@redhat.com
Signed-off-by: Peter Xu <peterx@redhat.com>
Use similar logic to cleanup the recv side.
Note that multifd_recv_terminate_threads() may need some similar rework
like the sender side, but let's leave that for later.
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Link: https://lore.kernel.org/r/20240202102857.110210-21-peterx@redhat.com
Signed-off-by: Peter Xu <peterx@redhat.com>
Shrink the function by moving relevant works into helpers: move the thread
join()s into multifd_send_terminate_threads(), then create two more helpers
to cover channel/state cleanups.
Add a TODO entry for the thread terminate process because p->running is
still buggy. We need to fix it at some point but not yet covered.
Suggested-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Link: https://lore.kernel.org/r/20240202102857.110210-20-peterx@redhat.com
Signed-off-by: Peter Xu <peterx@redhat.com>
The current multifd_queue_page() is not easy to read and follow. It is not
good with a few reasons:
- No helper at all to show what exactly does a condition mean; in short,
readability is low.
- Rely on pages->ramblock being cleared to detect an empty queue. It's
slightly an overload of the ramblock pointer, per Fabiano [1], which I
also agree.
- Contains a self recursion, even if not necessary..
Rewrite this function. We add some comments to make it even clearer on
what it does.
[1] https://lore.kernel.org/r/87wmrpjzew.fsf@suse.de
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Link: https://lore.kernel.org/r/20240202102857.110210-19-peterx@redhat.com
Signed-off-by: Peter Xu <peterx@redhat.com>
Split multifd_send_terminate_threads() into two functions:
- multifd_send_set_error(): used when an error happened on the sender
side, set error and quit state only
- multifd_send_terminate_threads(): used only by the main thread to kick
all multifd send threads out of sleep, for the last recycling.
Use multifd_send_set_error() in the three old call sites where only the
error will be set.
Use multifd_send_terminate_threads() in the last one where the main thread
will kick the multifd threads at last in multifd_save_cleanup().
Both helpers will need to set quitting=1.
Suggested-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Link: https://lore.kernel.org/r/20240202102857.110210-16-peterx@redhat.com
Signed-off-by: Peter Xu <peterx@redhat.com>
Now multifd's logic is designed to have no spurious wakeup. I still
remember a talk to Juan and he seems to agree we should drop it now, and if
my memory was right it was there because multifd used to hit that when
still debugging.
Let's drop it and see what can explode; as long as it's not reaching
soft-freeze.
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Link: https://lore.kernel.org/r/20240202102857.110210-15-peterx@redhat.com
Signed-off-by: Peter Xu <peterx@redhat.com>
This patch redefines the interfacing of ->send_prepare(). It further
simplifies multifd_send_thread() especially on zero copy.
Now with the new interface, we require the hook to do all the work for
preparing the IOVs to send. After it's completed, the IOVs should be ready
to be dumped into the specific multifd QIOChannel later.
So now the API looks like:
p->pages -----------> send_prepare() -------------> IOVs
This also prepares for the case where the input can be extended to even not
any p->pages. But that's for later.
This patch will achieve similar goal of what Fabiano used to propose here:
https://lore.kernel.org/r/20240126221943.26628-1-farosas@suse.de
However the send() interface may not be necessary. I'm boldly attaching a
"Co-developed-by" for Fabiano.
Co-developed-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Link: https://lore.kernel.org/r/20240202102857.110210-14-peterx@redhat.com
Signed-off-by: Peter Xu <peterx@redhat.com>
Introduce a helper multifd_send_prepare_header() to setup the header packet
for multifd sender.
It's fine to setup the IOV[0] _before_ send_prepare() because the packet
buffer is already ready, even if the content is to be filled in.
With this helper, we can already slightly clean up the zero copy path.
Note that I explicitly put it into multifd.h, because I want it inlined
directly into multifd*.c where necessary later.
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Link: https://lore.kernel.org/r/20240202102857.110210-13-peterx@redhat.com
Signed-off-by: Peter Xu <peterx@redhat.com>
Move them into fill/unfill of packets. With that, we can further cleanup
the send/recv thread procedure, and remove one more temp var.
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Link: https://lore.kernel.org/r/20240202102857.110210-12-peterx@redhat.com
Signed-off-by: Peter Xu <peterx@redhat.com>
Just like the previous patch, move the accounting for total_normal_pages on
both src/dst sides into the packet fill/unfill procedures.
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Link: https://lore.kernel.org/r/20240202102857.110210-11-peterx@redhat.com
Signed-off-by: Peter Xu <peterx@redhat.com>
This field, no matter whether on src or dest, is only used for debugging
purpose.
They can even be removed already, unless it still more or less provide some
accounting on "how many packets are sent/recved for this thread". The
other more important one is called packet_num, which is embeded in the
multifd packet headers (MultiFDPacket_t).
So let's keep them for now, but make them much easier to understand, by
doing below:
- Rename both of them to packets_sent / packets_recved, the old
name (num_packets) are waaay too confusing when we already have
MultiFDPacket_t.packets_num.
- Avoid worrying on the "initial packet": we know we will send it, that's
good enough. The accounting won't matter a great deal to start with 0 or
with 1.
- Move them to where we send/recv the packets. They're:
- multifd_send_fill_packet() for senders.
- multifd_recv_unfill_packet() for receivers.
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Link: https://lore.kernel.org/r/20240202102857.110210-10-peterx@redhat.com
Signed-off-by: Peter Xu <peterx@redhat.com>
The sender thread will yield the p->mutex before IO starts, trying to not
block the requester thread. This may be unnecessary lock optimizations,
because the requester can already read pending_job safely even without the
lock, because the requester is currently the only one who can assign a
task.
Drop that lock complication on both sides:
(1) in the sender thread, always take the mutex until job done
(2) in the requester thread, check pending_job clear lockless
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Link: https://lore.kernel.org/r/20240202102857.110210-8-peterx@redhat.com
Signed-off-by: Peter Xu <peterx@redhat.com>
Multifd provide a threaded model for processing jobs. On sender side,
there can be two kinds of job: (1) a list of pages to send, or (2) a sync
request.
The sync request is a very special kind of job. It never contains a page
array, but only a multifd packet telling the dest side to synchronize with
sent pages.
Before this patch, both requests use the pending_job field, no matter what
the request is, it will boost pending_job, while multifd sender thread will
decrement it after it finishes one job.
However this should be racy, because SYNC is special in that it needs to
set p->flags with MULTIFD_FLAG_SYNC, showing that this is a sync request.
Consider a sequence of operations where:
- migration thread enqueue a job to send some pages, pending_job++ (0->1)
- [...before the selected multifd sender thread wakes up...]
- migration thread enqueue another job to sync, pending_job++ (1->2),
setup p->flags=MULTIFD_FLAG_SYNC
- multifd sender thread wakes up, found pending_job==2
- send the 1st packet with MULTIFD_FLAG_SYNC and list of pages
- send the 2nd packet with flags==0 and no pages
This is not expected, because MULTIFD_FLAG_SYNC should hopefully be done
after all the pages are received. Meanwhile, the 2nd packet will be
completely useless, which contains zero information.
I didn't verify above, but I think this issue is still benign in that at
least on the recv side we always receive pages before handling
MULTIFD_FLAG_SYNC. However that's not always guaranteed and just tricky.
One other reason I want to separate it is using p->flags to communicate
between the two threads is also not clearly defined, it's very hard to read
and understand why accessing p->flags is always safe; see the current impl
of multifd_send_thread() where we tried to cache only p->flags. It doesn't
need to be that complicated.
This patch introduces pending_sync, a separate flag just to show that the
requester needs a sync. Alongside, we remove the tricky caching of
p->flags now because after this patch p->flags should only be used by
multifd sender thread now, which will be crystal clear. So it is always
thread safe to access p->flags.
With that, we can also safely convert the pending_job into a boolean,
because we don't support >1 pending jobs anyway.
Always use atomic ops to access both flags to make sure no cache effect.
When at it, drop the initial setting of "pending_job = 0" because it's
always allocated using g_new0().
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Link: https://lore.kernel.org/r/20240202102857.110210-7-peterx@redhat.com
Signed-off-by: Peter Xu <peterx@redhat.com>
This array is redundant when p->pages exists. Now we extended the life of
p->pages to the whole period where pending_job is set, it should be safe to
always use p->pages->offset[] rather than p->normal[]. Drop the array.
Alongside, the normal_num is also redundant, which is the same to
p->pages->num.
This doesn't apply to recv side, because there's no extra buffering on recv
side, so p->normal[] array is still needed.
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Link: https://lore.kernel.org/r/20240202102857.110210-6-peterx@redhat.com
Signed-off-by: Peter Xu <peterx@redhat.com>
Now we reset MultiFDPages_t object in the multifd sender thread in the
middle of the sending job. That's not necessary, because the "*pages"
struct will not be reused anyway until pending_job is cleared.
Move that to the end after the job is completed, provide a helper to reset
a "*pages" object. Use that same helper when free the object too.
This prepares us to keep using p->pages in the follow up patches, where we
may drop p->normal[].
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Link: https://lore.kernel.org/r/20240202102857.110210-5-peterx@redhat.com
Signed-off-by: Peter Xu <peterx@redhat.com>
Multifd send side has two fields to indicate error quits:
- MultiFDSendParams.quit
- &multifd_send_state->exiting
Merge them into the global one. The replacement is done by changing all
p->quit checks into the global var check. The global check doesn't need
any lock.
A few more things done on top of this altogether:
- multifd_send_terminate_threads()
Moving the xchg() of &multifd_send_state->exiting upper, so as to cover
the tracepoint, migrate_set_error() and migrate_set_state().
- multifd_send_sync_main()
In the 2nd loop, add one more check over the global var to make sure we
don't keep the looping if QEMU already decided to quit.
- multifd_tls_outgoing_handshake()
Use multifd_send_terminate_threads() to set the error state. That has
a benefit of updating MigrationState.error to that error too, so we can
persist that 1st error we hit in that specific channel.
- multifd_new_send_channel_async()
Take similar approach like above, drop the migrate_set_error() because
multifd_send_terminate_threads() already covers that. Unwrap the helper
multifd_new_send_channel_cleanup() along the way; not really needed.
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Link: https://lore.kernel.org/r/20240202102857.110210-4-peterx@redhat.com
Signed-off-by: Peter Xu <peterx@redhat.com>
When a multifd sender thread hit errors, it always needs to kick the main
thread by kicking all the semaphores that it can be waiting upon.
Provide a helper for it and deduplicate the code.
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Link: https://lore.kernel.org/r/20240202102857.110210-3-peterx@redhat.com
Signed-off-by: Peter Xu <peterx@redhat.com>
We've already done that with multifd_flush_after_each_section, for multifd
in general. Drop the stale "TODO-like" comment.
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Link: https://lore.kernel.org/r/20240202102857.110210-2-peterx@redhat.com
Signed-off-by: Peter Xu <peterx@redhat.com>
The 'size' argument is actually the number of pages that fit in a
multifd packet. Change it to uint32_t and rename.
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Peter Xu <peterx@redhat.com>
Link: https://lore.kernel.org/r/20240104142144.9680-4-farosas@suse.de
Signed-off-by: Peter Xu <peterx@redhat.com>
This was introduced by commit 34c55a94b1 ("migration: Create multipage
support") and never used.
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Peter Xu <peterx@redhat.com>
Link: https://lore.kernel.org/r/20240104142144.9680-2-farosas@suse.de
Signed-off-by: Peter Xu <peterx@redhat.com>
According to Error API, usage of ERRP_GUARD() or a local Error instead
of errp is needed if errp is passed to void functions, where it is later
dereferenced to see if an error occurred.
There are several places in multifd.c that use local Error although it
is not needed. Change these places to use errp directly.
Signed-off-by: Avihai Horon <avihaih@nvidia.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Link: https://lore.kernel.org/r/20231231093016.14204-12-avihaih@nvidia.com
Signed-off-by: Peter Xu <peterx@redhat.com>
If there is an error in multifd TLS handshake task,
multifd_tls_outgoing_handshake() retrieves the error with
qio_task_propagate_error() but never frees it.
Fix it by freeing the obtained Error.
In addition, the error is not reported at all, so report it with
migrate_set_error().
Fixes: 2964714015 ("migration/tls: add support for multifd tls-handshake")
Signed-off-by: Avihai Horon <avihaih@nvidia.com>
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Link: https://lore.kernel.org/r/20231231093016.14204-8-avihaih@nvidia.com
Signed-off-by: Peter Xu <peterx@redhat.com>
The else branch in multifd_channel_connect() is redundant because when
the if branch is taken the function returns.
Simplify the code by removing the else branch.
Signed-off-by: Avihai Horon <avihaih@nvidia.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Link: https://lore.kernel.org/r/20231231093016.14204-7-avihaih@nvidia.com
Signed-off-by: Peter Xu <peterx@redhat.com>
In multifd_recv_initial_packet(), if MultiFDInit_t->id is greater than
the configured number of multifd channels, an irrelevant error message
about multifd version is printed.
Change the error message to a relevant one about the channel id.
Signed-off-by: Avihai Horon <avihaih@nvidia.com>
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Link: https://lore.kernel.org/r/20231231093016.14204-6-avihaih@nvidia.com
Signed-off-by: Peter Xu <peterx@redhat.com>
This is being shadowed but the assignments at
multifd_channel_connect() and multifd_tls_channel_connect() .
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Message-ID: <20231110200241.20679-2-farosas@suse.de>
Signed-off-by: Juan Quintela <quintela@redhat.com>
After last commit, it is a write only variable.
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <20231025091117.6342-12-quintela@redhat.com>
We don't need to check p->quit in the multifd_send_thread() because it
is shadowed by the 'exiting' flag. Ever since that flag was added
p->quit became obsolete as a way to stop the thread.
Since p->quit is set at multifd_send_terminate_threads() under the
p->mutex lock, the thread will only see it once it loops, so 'exiting'
will always be seen first.
Note that setting p->quit at multifd_send_terminate_threads() still
makes sense because we need a way to inform multifd_send_pages() that
the channel has stopped.
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <20231012140651.13122-3-farosas@suse.de>
The function is currently called from two sites, one always gives it a
NULL Error and the other always gives it a non-NULL Error.
In the non-NULL case, all it does it trace the error and return. One
of the callers already have tracing, add a tracepoint to the other and
stop passing the error into the function.
Cc: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <20231012134343.23757-4-farosas@suse.de>
The preferred usage of the Error type is to always set both the return
code and the error when a failure happens. As all code called from the
send thread follows this pattern, we'll always have the return code
and the error set at the same time.
Aside from the convention, in this piece of code this must be the
case, otherwise the if (ret != 0) would be exiting the thread without
calling multifd_send_terminate_threads() which is incorrect.
Unify both paths to make it clear that both are taken when there's an
error.
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <20231012134343.23757-3-farosas@suse.de>
We're about to enable support for other transports in multifd, so
remove direct references to sockets.
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <20231012134343.23757-2-farosas@suse.de>
Sometimes multifd sends just sync packet with no pages
(normal_num is 0). In this case the old value is being
preserved and being accounted for while only packet_len
is being transferred.
Reset it to 0 after sending and accounting for.
Signed-off-by: Elena Ufimtseva <elena.ufimtseva@oracle.com>
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <20231011184358.97349-5-elena.ufimtseva@oracle.com>
Previous commit cbec7eb768
"migration/multifd: Compute transferred bytes correctly"
removed accounting for packet_len in non-rdma
case, but the next_packet_size only accounts for pages, not for
the header packet (normal_pages * PAGE_SIZE) that is being sent
as iov[0]. The packet_len part should be added to account for
the size of MultiFDPacket and the array of the offsets.
Signed-off-by: Elena Ufimtseva <elena.ufimtseva@oracle.com>
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <20231011184358.97349-4-elena.ufimtseva@oracle.com>
We're about to add more functions to this file so make it use the same
coding style as the rest of the code.
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Peter Xu <peterx@redhat.com>
Message-Id: <20230607161306.31425-2-farosas@suse.de>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Mechanical change running Coccinelle spatch with content
generated from the qom-cast-macro-clean-cocci-gen.py added
in the previous commit.
Suggested-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230601093452.38972-3-philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
In the past, we had to put the in the main thread all the operations
related with sizes due to qemu_file not beeing thread safe. As now
all counters are atomic, we can update the counters just after the
do the write. As an aditional bonus, we are able to use the right
value for the compression methods. Right now we were assuming that
there were no compression at all.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Message-Id: <20230515195709.63843-17-quintela@redhat.com>
Since previous commit, we calculate how much data we have send with
migration_transferred_bytes() so no need to maintain this counter and
remember to always update it.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20230515195709.63843-10-quintela@redhat.com>
These way we can make them atomic and use this functions from any
place. I also moved all functions that use rate_limit to
migration-stats.
Functions got renamed, they are not qemu_file anymore.
qemu_file_rate_limit -> migration_rate_exceeded
qemu_file_set_rate_limit -> migration_rate_set
qemu_file_get_rate_limit -> migration_rate_get
qemu_file_reset_rate_limit -> migration_rate_reset
qemu_file_acct_rate_limit -> migration_rate_account.
Reviewed-by: Harsh Prateek Bora <harshpb@linux.ibm.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-Id: <20230515195709.63843-6-quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
This will be used in the next commits to add colo support to multifd.
Signed-off-by: Lukas Straub <lukasstraub2@web.de>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Message-Id: <88135197411df1a71d7832962b39abf60faf0021.1683572883.git.lukasstraub2@web.de>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Fabiano Rosas
Peter Xu
Avihai Horon
Juan Quintela
Elena Ufimtseva
Michael Tokarev
Philippe Mathieu-Daudé
Lukas Straub