Commit Graph

14 Commits

Author SHA1 Message Date
Fabien Chouteau
30efbf330a
SiFive RISC-V GPIO Device
QEMU model of the GPIO device on the SiFive E300 series SOCs.

The pins are not used by a board definition yet, however this
implementation can already be used to trigger GPIO interrupts from the
software by configuring a pin as both output and input.

Signed-off-by: Fabien Chouteau <chouteau@adacore.com>
Reviewed-by: Palmer Dabbelt <palmer@sifive.com>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2019-05-24 11:58:30 -07:00
Alistair Francis
40e46e516d
riscv: Ensure the kernel start address is correctly cast
Cast the kernel start address to the target bit length.

This ensures that we calculate the initrd offset to a valid address for
the architecture.

Steps to reproduce the original problem (reported by Alex):
  Build U-Boot for the virt machine for riscv32. Then run it with

    $ qemu-system-riscv32 -M virt -kernel u-boot -nographic -initrd <a file>

  You can find the initrd address with

    U-Boot# fdt addr $fdtcontroladdr
    U-Boot# fdt ls /chosen

  Then take a peek at that address:

    U-Boot# md.b <addr>

  and you will see that there is nothing there without this patch. The
  reason is that the binary was loaded to a negative address.

Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Suggested-by: Alexander Graf <agraf@suse.de>
Reported-by: Alexander Graf <agraf@suse.de>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2019-02-11 15:56:22 -08:00
Liam Merwick
4366e1db16 elf: Add optional function ptr to load_elf() to parse ELF notes
This patch adds an optional function pointer, 'elf_note_fn', to
load_elf() which causes load_elf() to additionally parse any
ELF program headers of type PT_NOTE and check to see if the ELF
Note is of the type specified by the 'translate_opaque' arg.
If a matching ELF Note is found then the specfied function pointer
is called to process the ELF note.

Passing a NULL function pointer results in ELF Notes being skipped.

The first consumer of this functionality is the PVHboot support
which needs to read the XEN_ELFNOTE_PHYS32_ENTRY ELF Note while
loading the uncompressed kernel binary in order to discover the
boot entry address for the x86/HVM direct boot ABI.

Signed-off-by: Liam Merwick <liam.merwick@oracle.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-02-05 16:50:16 +01:00
Michael Clark
194eef09d0
RISC-V: Enable second UART on sifive_e and sifive_u
Previously the second UARTs on the sifive_e and sifive_u machines
where disabled due to check-qtest-riscv32 and check-qtest-riscv64
failures. Recent changes in the QEMU core serial code have
resolved these failures so the second UARTs can be instantiated.

Cc: Palmer Dabbelt <palmer@sifive.com>
Cc: Sagar Karandikar <sagark@eecs.berkeley.edu>
Cc: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
Cc: Alistair Francis <Alistair.Francis@wdc.com>
Signed-off-by: Michael Clark <mjc@sifive.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2018-12-20 12:08:43 -08:00
Mao Zhongyi
371b74e221 Drop "qemu:" prefix from error_report() arguments
error_report and friends already add a "qemu-system-xxx" prefix
to the string, so a "qemu:" prefix is redundant in the string.
Just drop it.

Reported-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Mao Zhongyi <maozhongyi@cmss.chinamobile.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <1537495530-580-1-git-send-email-maozhongyi@cmss.chinamobile.com>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
2018-09-24 17:13:07 +02:00
Alistair Francis
54f3141a58 sifive_e: Fix crash when introspecting the device
Use the new object_initialize_child() and sysbus_init_child_obj() to
fix the issue.

Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Suggested-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Michael Clark <mjc@sifive.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
2018-07-19 09:05:48 -07:00
Alistair Francis
647a70a10f hw/riscv/sifive_plic: Use gpios instead of irqs
Instead of creating the interrupt in lines with qemu_allocate_irq() use
qdev_init_gpio_in() as this gives us the ability to use the qdev*gpio*()
helpers later on.

Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Suggested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Michael Clark <mjc@sifive.com>
2018-07-05 15:24:25 -07:00
Alistair Francis
651cd8b7e1 hw/riscv/sifive_e: Create a SiFive E SoC object
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Michael Clark <mjc@sifive.com>
2018-07-05 15:24:25 -07:00
Michael Clark
5aec3247c1
RISC-V: Mark ROM read-only after copying in code
The sifive_u machine already marks its ROM readonly however
it has the wrong base address for its mask ROM. This patch
fixes the sifive_u mask ROM base address.

This commit makes all other boards consistently use mask_rom
as the variable name for their ROMs. Boards that use device
tree now check that that the device tree fits in the assigned
ROM space using the new qemu_fdt_totalsize(void *fdt)
interface, adding a bounds check and error message. This
can detect truncation.

Cc: Sagar Karandikar <sagark@eecs.berkeley.edu>
Cc: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
Cc: Palmer Dabbelt <palmer@sifive.com>
Cc: Alistair Francis <Alistair.Francis@wdc.com>
Signed-off-by: Michael Clark <mjc@sifive.com>
Reviewed-by: Alistair Francis <Alistair.Francis@wdc.com>
2018-05-06 10:54:21 +12:00
Michael Clark
89854803ce
RISC-V: Remove EM_RISCV ELF_MACHINE indirection
Pointless indirection. Other ports use EM_ constants directly.

Cc: Sagar Karandikar <sagark@eecs.berkeley.edu>
Cc: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
Signed-off-by: Michael Clark <mjc@sifive.com>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
2018-05-06 10:39:38 +12:00
Michael Clark
42b3a4b7cc
RISC-V: Remove unused class definitions
Removes a whole lot of unnecessary boilerplate code. Machines
don't need to be objects. The expansion of the SOC object model
for the RISC-V machines will happen in the future as SiFive
plans to add their FE310 and FU540 SOCs to QEMU. However, it
seems that this present boilerplate is complete unnecessary.

Cc: Sagar Karandikar <sagark@eecs.berkeley.edu>
Cc: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
Signed-off-by: Michael Clark <mjc@sifive.com>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
2018-05-06 10:39:38 +12:00
Michael Clark
b7938980fb
RISC-V: Remove identity_translate from load_elf
When load_elf is called with NULL as an argument to the
address translate callback, it does an identity translation.
This commit removes the redundant identity_translate callback.

Cc: Sagar Karandikar <sagark@eecs.berkeley.edu>
Cc: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
Signed-off-by: Michael Clark <mjc@sifive.com>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
2018-05-06 10:39:38 +12:00
Peter Maydell
9bca0edb28 Change references to serial_hds[] to serial_hd()
Change all the uses of serial_hds[] to go via the new
serial_hd() function. Code change produced with:
 find hw -name '*.[ch]' | xargs sed -i -e 's/serial_hds\[\([^]]*\)\]/serial_hd(\1)/g'

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-id: 20180420145249.32435-8-peter.maydell@linaro.org
2018-04-26 13:57:00 +01:00
Michael Clark
eb637edb12
SiFive Freedom E Series RISC-V Machine
This provides a RISC-V Board compatible with the the SiFive Freedom E SDK.
The following machine is implemented:

- 'sifive_e'; CLINT, PLIC, UART, AON, GPIO, QSPI, PWM

Acked-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Sagar Karandikar <sagark@eecs.berkeley.edu>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
Signed-off-by: Michael Clark <mjc@sifive.com>
2018-03-07 08:30:28 +13:00