This patch exploits the new DisplaySurface and PixelFormat structures in
vnc, making the code easier to read allowing further improvements.
Compared to the last version I fixed a bug that prevented the hextile
encoding from working properly.
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6337 c046a42c-6fe2-441c-8c8c-71466251a162
This patch changes the DisplayState interface adding support for
multiple frontends at the same time (sdl and vnc) and implements most
of the benefit of the shared_buf patch without the added complexity.
Currently DisplayState is managed by sdl (or vnc) and sdl (or vnc) is
also responsible for allocating the data and setting the depth.
Vga.c (or another backend) will do any necessary conversion.
The idea is to change it so that is vga.c (or another backend) together
with console.c that fully manage the DisplayState interface allocating
data and setting the depth (either 16 or 32 bit, if the guest uses a
different resolution or is in text mode, vga.c (or another backend) is
in charge of doing the conversion seamlessly).
The other idea is that DisplayState supports *multiple* frontends
like sdl and vnc; each of them can register some callbacks to be called
when a display event occurs.
The interesting changes are:
- the new structures and related functions in console.h and console.c
in particular the following functions are very helpful to manage a
DisplaySurface:
qemu_create_displaysurface
qemu_resize_displaysurface
qemu_create_displaysurface_from
qemu_free_displaysurface
- console_select and qemu_console_resize in console.c
this two functions manage multiple consoles on a single host display
- moving code around in hw/vga.c
as for the shared_buf patch this is necessary to be able to handle a dynamic
DisplaySurface bpp
- changes to vga_draw_graphic in hw/vga.c
this is the place where the DisplaySurface buffer is shared with the
videoram, when possible;
Compared to the last version the only changes are:
- do not remove support to dpy_copy in cirrus_vga
- change the name of the displaysurface handling functions
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6336 c046a42c-6fe2-441c-8c8c-71466251a162
vnc_state->display is set to NULL after "change vnc none" but vnc_state itself
is still valid.
(James Ko)
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6010 c046a42c-6fe2-441c-8c8c-71466251a162
When using an existing unix socket like:
-vnc unix:/tmp/file1Y2nY2
qemu fails to bind a unix socket because the vnc call to unix_listen includes
the unix: prefix and stores that in the unix.sun_path. The fix is to not pass
in unix: for the filename (same way qemu-char.c does it).
Signed-off-by: Ryan Harper <ryanh@us.ibm.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5856 c046a42c-6fe2-441c-8c8c-71466251a162
VNC should not maintain modifer state upon reconnects With some window
managers/vnc clients it will only see a key down event for a modifier
followed by immediate disconnect(think Alt-F4), with a net effect of
subsequently connected clients operating as if the modifier was never
released.
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5851 c046a42c-6fe2-441c-8c8c-71466251a162
This allows among other things to capturing A/V of running
guests. Ad-hoc client that does this (via script that invokes ffmpeg)
can be found at:
http://repo.or.cz/w/qemu/malc.git?a=tree;f=vcap;hb=capture3
Thanks to Anthony Liguori for comments and review.
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5850 c046a42c-6fe2-441c-8c8c-71466251a162
The patch in r5531 which replaced a bunch of strncpy with pstrcpy causes
the x509 credentials from the -vnc parameter to be one character shorter
than entered meaning that there is currently no way to enter x509
certificates...
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5707 c046a42c-6fe2-441c-8c8c-71466251a162
This patch switches the vnc code ofer to the new socket helper
functions.
It adds support IPv6 support and for automatically allocating an unused
vnc display port. The latter is handled ising a to= option, specifying
the upper limit for the display number to try. Scanning is started at
the display number given in the display specification, i.e. this command
line:
-vnc localhost:7,to=11
will try displays 7 to 11 (inclusive).
There are also new "ipv4" and "ipv6" options to make qemu try only
the specified internet protocol version.
The display actually allocated can be queried using the "info vnc"
monitor command.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5696 c046a42c-6fe2-441c-8c8c-71466251a162
- some vectors can be declared as "const"
- test on CONFIG_VNC_TLS is done for two times while just one is enough.
(Carlo Bramini)
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5172 c046a42c-6fe2-441c-8c8c-71466251a162
This patch adds support for the ExtendedKeyEvent client message. This message
allows a client to send raw scan codes directly to the server. If the client
and server are using the same keymap, then it's unnecessary to use the '-k'
option with QEMU when this extension is supported.
This is extension is currently only implemented by gtk-vnc based clients
(gvncviewer, virt-manager, vinagre, etc.).
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5076 c046a42c-6fe2-441c-8c8c-71466251a162
Add idle field to DisplayState struct, so drivers can figure
the display is idle and take advantage of that.
The xen framebuffer driver will use this to communicate the
idle state to the guest, so it knows it can stop doing updates
to a virtual display which is invisible anyway.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Samuel Thibault <samuel.thibault@eu.citrix.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5056 c046a42c-6fe2-441c-8c8c-71466251a162
'h' actually is the coordinate of bottom of the rectangle and not height.
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@4571 c046a42c-6fe2-441c-8c8c-71466251a162
On a resize, vncviewer keeps the image in the upper-left part of the screen
unmodified and fills the right end of the lines with black colour. vnc.c keeps the first n bytes of the framebuffer unmodified instead - meaning that
the client's image doesn't match the image in framebuffer and checking
for dirty rows gives wrong results. We can either invalidate the whole
buffer or implement the same transformation as the client.
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@4569 c046a42c-6fe2-441c-8c8c-71466251a162
If the client does not support the DesktopResize pseudo-encoding, then
vs->{width,height} may be smaller than ds->{width,height}. dirty_row is
sized according to vs->{width,height}, not ds->{width,height}.
This patch makes sure to bound the update region to vs->{width,height} to
avoid a possible SEGV.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Reported-by: Marcelo Tosatti <mtosatti@redhat.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@4502 c046a42c-6fe2-441c-8c8c-71466251a162
