This reverts commit ff71f2e8ca. This is because
the linux 8139cp driver would leave the card in "Config Register Write Enable"
mode after the eeprom were read or write ( which is unexpected in the spec
). Also a physical 8139 card can still DMA into host memory in modes other than
Normal mode, so we need revert this commit to align with the behavior of
physical card.
The issue of 8139cp driver should be fixed in linux seperately.
Signed-off-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
* qemu-kvm/uq/master:
virtio/vhost: Add support for KVM in-kernel MSI injection
msix: Add msix_nr_vectors_allocated
kvm: Enable use of kvm_irqchip_in_kernel in hwlib code
kvm: Introduce kvm_irqchip_add/remove_irqfd
kvm: Make kvm_irqchip_commit_routes an internal service
kvm: Publicize kvm_irqchip_release_virq
kvm: Introduce kvm_irqchip_add_msi_route
kvm: Rename kvm_irqchip_add_route to kvm_irqchip_add_irq_route
msix: Introduce vector notifiers
msix: Invoke msix_handle_mask_update on msix_mask_all
msix: Factor out msix_get_message
kvm: update vmxcap for EPT A/D, INVPCID, RDRAND, VMFUNC
kvm: Enable in-kernel irqchip support by default
kvm: Add support for direct MSI injections
kvm: Update kernel headers
kvm: x86: Wire up MSI support for in-kernel irqchip
pc: Enable MSI support at APIC level
kvm: Introduce basic MSI support for in-kernel irqchips
Introduce MSIMessage structure
kvm: Refactor KVMState::max_gsi to gsi_count
As in the SATA and AHCI specifications, a FIS is 5 Dwords of 4 bytes
each, which comes to 20 bytes (decimal), not 0x20.
Signed-off-by: Daniel Verkamp <daniel@drv.nu>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Currently the sector value for the geometry is masked, even if the
user usesa command line parameter that explicitely gives a number.
This breaks dasd devices on s390. A dasd device can have
a physical block size of 4096 (== same for logical block size)
and a typcial geometry of 15 heads and 12 sectors per cyl.
The ibm partition detection relies on a correct geometry
reported by the device. Unfortunately the current code changes
12 to 8. This would be necessary if the total size is
not a multiple of logical sector size, but for dasd this
is not the case.
This patch checks the device size and only applies sector
mask if necessary.
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
CC: Christoph Hellwig <hch@lst.de>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The local variables ret, i are only used if __linux__ is defined.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Start VM with 8 multiple-function block devs, hot-removing
those block devs by 'device_del ...' would cause qemu abort.
| (qemu) device_del virti0-0-0
| (qemu) **
|ERROR:qom/object.c:389:object_delete: assertion failed: (obj->ref == 0)
It's a regression introduced by commit 57c9fafe
The whole PCI slot should be removed once. Currently only one func
is cleaned in pci_unplug_device(), if you try to remove a single
func by monitor cmd.
free_qdev() are called for all functions in slot,
but unparent_delete() is only called for one
function.
Signed-off-by: XXXX
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
The previous multiboot load code did not treat the case where
load_end_addr was 0 specially. The multiboot specification says the
following:
* load_end_addr
Contains the physical address of the end of the data segment.
(load_end_addr - load_addr) specifies how much data to load. This
implies that the text and data segments must be consecutive in the
OS image; this is true for existing a.out executable formats. If
this field is zero, the boot loader assumes that the text and data
segments occupy the whole OS image file.
Signed-off-by: Scott Moser <smoser@ubuntu.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
With pc-0.12, we map the video RAM both through the PCI BAR (the guest does
this) and through a fixed mapping at 0xe0000000. The memory API doesn't allow
this double map, and aborts.
Fix by using an alias.
Reported-by: Michael Tokarev <mjt@tls.msk.ru>
Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
* sstabellini/for_1.1_rc3:
Call xc_domain_shutdown with the reboot flag when the guest requests a reboot.
xen: Fix PV-on-HVM
xen_disk: properly update stats in ioreq_release()
xen_disk: use bdrv_aio_flush instead of bdrv_flush
xen_disk: remove syncwrite option
xen: disable rtc_clock
xen: do not initialize the interval timer and PCSPK emulator
* kwolf/for-anthony:
fdc-test: introduced qtest no_media_on_start and cmos qtest for floppy
fdc: fix media detection
fdc: floppy drive should be visible after start without media
qemu-iotests: mark 035 qcow2-only
qcow2: Check qcow2_alloc_clusters_at() return value
sheepdog: use heap instead of stack for BDRVSheepdogState
sheepdog: return -errno on error
sheepdog: mark image as snapshot when tag is specified
qemu-img: Explain how rebase operation can be used to perform a 'diff' operation.
qcow2: don't leak buffer for unexpected qcow_version in header
We have to set up 'media_changed' after guest start so floppy driver
could detect that there is no media in drive. For this purpose we call
'fdctrl_change_cb' instead of 'fd_revalidate' in 'fdctrl_connect_drives'.
'fd_revalidate' is called inside 'fdctrl_change_cb'.
We still have to set default drive geometry in 'fd_revalidate' even
if there is no media in drive. When you try to open (windows) or mount (linux)
floppy the driver tries to seek on track 1. Linux guest stuck in loop then
kernel crashes and windows guest prints error message.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
If you start guest with floppy drive but without media inserted, guest
still should see floppy drive pressent.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
When DEBUG_ES1370 is defined, the compiler shows these warnings:
hw/es1370.c: In function ?es1370_update_voices?:
hw/es1370.c:414: warning: format ?%d? expects type ?int?, but argument 3 has type ?size_t?
hw/es1370.c: In function ?es1370_writel?:
hw/es1370.c:582: warning: format ?%d? expects type ?int?, but argument 3 has type ?long int?
hw/es1370.c:592: warning: format ?%d? expects type ?int?, but argument 3 has type ?long int?
hw/es1370.c:609: warning: format ?%d? expects type ?int?, but argument 3 has type ?long int?
hw/es1370.c: In function ?es1370_readl?:
hw/es1370.c:751: warning: suggest braces around empty body in an ?if? statement
Fix the format strings and add the missing braces.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: malc <av1474@comtv.ru>
In the context of PV-on-HVM under Xen, the emulated nics are supposed to be
unplug before the guest drivers are initialized, when the guest write to a
specific IO port.
Without this patch, the guest end up with two nics with the same MAC, the
emulated nic and the PV nic.
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
The str allocated in visit_type_str was not freed.
The visit_type_str function is an input visitor(<QMP/String/etc>-to-native)
here, it will allocate memory for caller, so the caller is responsible for
freeing the memory.
Reviewed-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: dunrong huang <riegamaths@gmail.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
VIRTIO_BLK_F_SCSI is supposed to mean whether the host can *parse*
SCSI requests, not *execute* them. You could run QEMU with scsi=on
and a file-backed disk, and QEMU would fail all SCSI requests even
though it advertises VIRTIO_BLK_F_SCSI.
Because we need to do this to fix a migration compatibility problem
related to how QEMU is invoked by management, we must do this
unconditionally even on older machine types. This more or less assumes
that no one ever invoked QEMU with scsi=off.
Here is how testing goes:
- old QEMU, scsi=on -> new QEMU, scsi=on
- new QEMU, scsi=on -> old QEMU, scsi=on
- old QEMU, scsi=off -> new QEMU, scsi=on
- new QEMU, scsi=off -> old QEMU, scsi=on
ok (new QEMU has VIRTIO_BLK_F_SCSI, adding host features is fine)
- old QEMU, scsi=off -> new QEMU, scsi=off
ok (new QEMU has VIRTIO_BLK_F_SCSI, adding host features is fine)
- old QEMU, scsi=on -> new QEMU, scsi=off
ok, bug fixed
- new QEMU, scsi=on -> old QEMU, scsi=off
doesn't work (same as: old QEMU, scsi=on -> old QEMU, scsi=off)
- new QEMU, scsi=off -> old QEMU, scsi=off
broken by the patch
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
We will have to add another field to the virtio-blk configuration in
the next patch. Avoid a proliferation of arguments to virtio_blk_init.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Move it from virtio_blk_exit_pci to virtio_blk_exit.
This is included here because the next patch removes proxy->block.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Linux really looks only at scsi->errors for SG_IO requests; it does
not look at the virtio request status at all. Because of this, when
a SG_IO request is failed early with virtio_blk_req_complete(req,
VIRTIO_BLK_S_UNSUPP), without writing hdr.status, it will look like
a success to the guest.
This is their bug, but we can make it safe for older guests now by
forcing scsi->errors to have a non-zero value whenever a request
has to be failed.
But if we fix the bug in the guest driver, we will have another problem
because QEMU returns VIRTIO_BLK_S_IOERR if the status is non-zero, and
Linux translates that to -EIO. Rather, the guest should succeed the
request and pass the non-zero status via the userspace-provided SG_IO
structure. So, remove the case where virtio_blk_handle_scsi can
return VIRTIO_BLK_S_IOERR.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Allow load_image_targphys to load files on systems with more than 2G of
emulated memory by changing the max_sz parameter from an int to an
uint64_t.
Reviewed-by: Andreas F=E4rber <afaerber@suse.de>
Acked-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Mark Langsdorf <mark.langsdorf@calxeda.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Make use of the new vector notifier to track changes of the MSI-X
configuration of virtio PCI devices. On enabling events, we establish
the required virtual IRQ to MSI-X message route and link the signaling
eventfd file descriptor to this vIRQ line. That way, vhost-generated
interrupts can be directly delivered to an in-kernel MSI-X consumer like
the x86 APIC.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Analogously to msi_nr_vectors_allocated, add a service for MSI-X. Will
be used by the virtio-pci layer.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Automatically commit route changes after kvm_add_routing_entry and
kvm_irqchip_release_virq. There is no performance relevant use case for
which collecting multiple route changes is beneficial. This makes
kvm_irqchip_commit_routes an internal service which assert()s that the
corresponding IOCTL will always succeed.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
We will add kvm_irqchip_add_msi_route, so let's make the difference
clearer.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Vector notifiers shall be triggered by the MSI/MSI-X core whenever a
relevant configuration change is programmed by the guest. In case of
MSI-X, changes are reported when the effective mask (global &&
per-vector) alters its state. On unmask, the current vector
configuration is included in the event report. This allows users - e.g.
virtio-pci layer - to transfer this information to external MSI-X
routing subsystems - like vhost + KVM in-kernel irqchip.
This implementation only provides MSI-X support, but extension to MSI is
feasible and will be provided later on when adding support for KVM PCI
device assignment.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
In preparation of firing vector notifiers on mask changes, call
msix_handle_mask_update also from msix_mask_all. So far, this will have
no real effect.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
This helper will also be used by the upcoming config notifier.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
There are no outside references to virtio_portio.
Add missing 'static' specifier.
Reviewed-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Initrd load address is too low, it conflicts with kernel load
address:
rom: requested regions overlap (rom phdr #0: /tmp/vmlinux-debian-6.0.4-sparc64. free=0x0000000000742519, addr=0x0000000000400000)
rom loading failed
Fix by making the initrd address variable, load initrd after kernel
image. Use 64 bit variables instead of longs or 32 bit types.
Tested-by: Artyom Tarasenko <atar4qemu@gmail.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Signed-off-by: John V. Baboval <john.baboval@virtualcomputer.com>
Signed-off-by: Tom Goetz <tom.goetz@virtualcomputer.com>
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
In the context of PV-on-HVM under Xen, the emulated nics are supposed to be
unplug before the guest drivers are initialized, when the guest write to a
specific IO port.
Without this patch, the guest end up with two nics with the same MAC, the
emulated nic and the PV nic.
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
While for the "normal" case (called from blk_send_response_all())
decrementing requests_finished is correct, doing so in the parse error
case is wrong; requests_inflight needs to be decremented instead.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Use bdrv_aio_flush instead of bdrv_flush.
Make sure to call bdrv_aio_writev/readv after the presync bdrv_aio_flush is fully
completed and make sure to call the postsync bdrv_aio_flush after
bdrv_aio_writev/readv is fully completed.
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
This patch removes a dead option.
The same can be achieved removing BDRV_O_NOCACHE and BDRV_O_CACHE_WB
from the flags passed to bdrv_open.
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
PIT and PCSPK are emulated by the hypervisor so we don't need to emulate
them in Qemu: this patch prevents Qemu from waking up needlessly at
PIT_FREQ on Xen.
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Catch writes to the MSI MMIO region in the KVM APIC and forward them to
the kernel. Provide the kernel support GSI routing, this allows to
enable MSI support also for in-kernel irqchip mode.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Push msi_supported enabling to the APIC implementations where we can
encapsulate the decision more cleanly, hiding the details from the
generic code.
Acked-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Will be used for generating and distributing MSI messages, both in
emulation mode and under KVM.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
* sweil/for-1.1:
qemu-doc: Use QEMU instead of qemu for product name
qemu-doc: Fix executable name in examples
qemu-doc: Add missing parameter in description of -D option
configure: Use QEMU instead of Qemu
fix some common typos
qemu-timer: Fix wrong error message
Since most property types do not have a parse property now, this was
broken. Fix it by looking at the setter instead.
Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
Acked-by: Andreas F=E4rber <afaerber@suse.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Most important here is to update our internal endpoint state so we know
the endpoint isn't in halted state any more. Without this usb-host
tries to clear halt again with the next data transfer submitted. Doing
this twice is (a) not correct and (b) confuses some usb devices,
rendering them non-functional in the guest.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
These were identified using: http://github.com/lyda/misspell-check
and run like this to create a bourne shell script using GNU sed's
-i option:
git ls-files|grep -vF .bin | misspellings -f - |grep -v '^ERROR:' |perl \
-pe 's/^(.*?)\[(\d+)\]: (\w+) -> "(.*?)"$/sed -i '\''${2}s!$3!$4!'\'' $1/'
Manually eliding the FP, "rela->real" and resolving "addres" to
address (not "adders") we get this:
sed -i '450s!thru!through!' Changelog
sed -i '260s!neccessary!necessary!' coroutine-sigaltstack.c
sed -i '54s!miniscule!minuscule!' disas.c
sed -i '1094s!thru!through!' hw/usb/hcd-ehci.c
sed -i '1095s!thru!through!' hw/usb/hcd-ehci.c
sed -i '21s!unecessary!unnecessary!' qapi-schema-guest.json
sed -i '307s!explictly!explicitly!' qemu-ga.c
sed -i '490s!preceeding!preceding!' qga/commands-posix.c
sed -i '792s!addres!address!' qga/commands-posix.c
sed -i '6s!beeing!being!' tests/tcg/test-mmap.c
Also, manually fix "arithmentic", spotted by Peter Maydell:
sed -i 's!arithmentic!arithmetic!' coroutine-sigaltstack.c
Signed-off-by: Jim Meyering <meyering@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
We have the following simplified callgraph in mips_fulong2e_init():
cpu_init() => cpu_mips_init()
object_new()
mips_cpu_initfn()
cpu_exec_init()
register_savevm(NULL, "cpu", cpu_index, CPU_SAVE_VERSION,
cpu_save, cpu_load, env)
register_savevm(NULL, "cpu", 0, 3, cpu_save, cpu_load, env)
CPU_SAVE_VERSION is defined as 3 in target-mips/cpu.h.
fulong2e instantiates one CPU, so its cpu_index is 0.
Thus the two are fully identical.
Therefore just remove the second call in fulong2e.
Signed-off-by: Juan Quintela <quintela@redhat.com>
[AF: Extend explanation in commit message]
Signed-off-by: Andreas Färber <afaerber@suse.de>
This was erroneously dropped in d6c730086c
(pc: reduce duplication in compat machine types).
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
