Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Pirqs are not freed when driver unload, then new pirqs are allocated when
driver reload. This could exhaust pirqs if do it in a loop.
This patch fixes the bug by freeing pirqs when ENABLE bit is cleared in
msi/msix control reg.
There is also other way of fixing it such as reuse pirqs between driver reload,
but this way is better.
Xen-devel: http://marc.info/?l=xen-devel&m=136800120304275&w=2
Signed-off-by: Zhenzhong Duan <zhenzhong.duan@oracle.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The address_space_translate() function cuts the returned plen (page size)
to hardcoded TARGET_PAGE_SIZE. This function can be used on pages bigger
than that so this limiting should not be used on such pages.
Since originally the limiting was introduced for XEN, we can safely
limit this piece of code to XEN. So does the patch.
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Add "version" property to local apic, and have it default to
0x14 for pc machines starting at 2.1. For compatibility with
previous releases, pc machines up to 2.0 will have their local
apic version set to 0x11.
Signed-off-by: Gabriel L. Somlo <somlo@cmu.edu>
Acked-by: Alexander Graf <agraf@suse.de>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Add the "boilerplate" necessary for subsequent patches to
simply drop in compat_props for pc machines 2.0 and older.
This patch contains no functional changes.
Signed-off-by: Gabriel Somlo <somlo@cmu.edu>
Acked-by: Alexander Graf <agraf@suse.de>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This is a guest-triggerable error, as seen when using Xenix 2.3.4.
Replace hw_error by LOG_UNIMPL, so that guests can continue.
With this patch, I can install and use Xenix 2.3.4a without any problem.
I can also start installation of Xenix 2.3.4q, but it fails due to not
finding an hard disk.
Signed-off-by: Hervé Poussineau <hpoussin@reactos.org>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Two patches deal with address translation, one fixes a problem in the
channel subsystem code.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (GNU/Linux)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=wjNY
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/cohuck/tags/s390x-20140507' into staging
Some improvements for s390.
Two patches deal with address translation, one fixes a problem in the
channel subsystem code.
# gpg: Signature made Wed 07 May 2014 09:29:30 BST using RSA key ID C6F02FAF
# gpg: Can't check signature: public key not found
* remotes/cohuck/tags/s390x-20140507:
s390x/css: Don't save orb in subchannel.
s390x/helper: Added format control bit to MMU translation
s390x/helper: Fixed real-to-absolute address translation
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=VoYL
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/juanquintela/tags/migration/20140505' into staging
migration/next for 20140505
# gpg: Signature made Mon 05 May 2014 21:27:24 BST using RSA key ID 5872D723
# gpg: Can't check signature: public key not found
* remotes/juanquintela/tags/migration/20140505: (36 commits)
migration: expose xbzrle cache miss rate
migration: expose the bitmap_sync_count to the end
migration: Add counts of updating the dirty bitmap
XBZRLE: Fix one XBZRLE corruption issues
migration: remove duplicate code
Coverity: Fix failure path for qemu_accept in migration
Init the XBZRLE.lock in ram_mig_init
Provide init function for ram migration
Count used RAMBlock pages for migration_dirty_pages
Make qemu_peek_buffer loop until it gets it's data
Disallow outward migration while awaiting incoming migration
virtio: validate config_len on load
virtio-net: out-of-bounds buffer write on load
openpic: avoid buffer overrun on incoming migration
ssi-sd: fix buffer overrun on invalid state load
savevm: Ignore minimum_version_id_old if there is no load_state_old
usb: sanity check setup_index+setup_len in post_load
vmstate: s/VMSTATE_INT32_LE/VMSTATE_INT32_POSITIVE_LE/
virtio-scsi: fix buffer overrun on invalid state load
zaurus: fix buffer overrun on invalid state load
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* -device / device_add assertion fix
* QEMUMachine conversion to MachineClass
* Device error handling improvements
* QTest cleanups and test cases for some more PCI devices
* PortIO memory leak fixes
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)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=UrRJ
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/afaerber/tags/qom-devices-for-peter' into staging
QOM/QTest infrastructure fixes and device conversions
* -device / device_add assertion fix
* QEMUMachine conversion to MachineClass
* Device error handling improvements
* QTest cleanups and test cases for some more PCI devices
* PortIO memory leak fixes
# gpg: Signature made Mon 05 May 2014 19:59:16 BST using RSA key ID 3E7E013F
# gpg: Good signature from "Andreas Färber <afaerber@suse.de>"
# gpg: aka "Andreas Färber <afaerber@suse.com>"
* remotes/afaerber/tags/qom-devices-for-peter:
PortioList: Store PortioList in device state
tests: Add EHCI qtest
tests: Add ioh3420 qtest
tests: Add intel-hda qtests
tests: Add es1370 qtest
tests: Add ac97 qtest
qtest: Be paranoid about accept() addrlen argument
qtest: Add error reporting to socket_accept()
qtest: Assure that init_socket()'s listen() does not fail
MAINTAINERS: Document QOM
arm: Clean up fragile use of error_is_set() in realize() methods
qom: Clean up fragile use of error_is_set() in set() methods
hw: Consistently name Error ** objects errp, and not err
hw: Consistently name Error * objects err, and not errp
machine: Remove QEMUMachine indirection from MachineClass
machine: Replace QEMUMachine by MachineClass in accelerator configuration
vl.c: Replace QEMUMachine with MachineClass in QEMUMachineInitArgs
machine: Copy QEMUMachine's fields to MachineClass
machine: Remove obsoleted field from QEMUMachine
qdev: Fix crash by validating the object type
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
acpi build tried to add offset of hpet table to rsdt even when hpet was
disabled. If no tables follow hpet, this could lead to a malformed
rsdt.
Fix it up.
To avoid such errors in the future, rearrange code slightly to make it
clear that acpi_add_table stores the offset of the following table - not
of the previous one.
Reported-by: TeLeMan <geleman@gmail.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Cc: qemu-stable@nongnu.org
Object returned by object_property_get_qobject needs its reference counter to
be decremented when it is not needed by caller anymore.
Signed-off-by: Kirill Batuzov <batuzovk@ispras.ru>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
acpi_pcihp_get_bsel implements functionality of object_property_get_int for
specific property named ACPI_PCIHP_PROP_BSEL, but fails to decrement object's
reference counter properly. Rewriting it using generic object_property_get_int
serves two purposes: reducing code duplication and fixing memory leak.
Signed-off-by: Kirill Batuzov <batuzovk@ispras.ru>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Current css code saves the operation request block (orb) in the
subchannel structure for later consumption by the start function
handler. This might make sense for asynchronous execution of the
start function (which qemu doesn't support), but not in our case;
it would even be wrong since orb contains a reference to a local
variable in the base ssch handler.
Let's just pass the orb through the start function call chain for
ssch; for rsch, we can pass NULL as the backend function does not
use any information passed via the orb there.
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
With the EDAT-1 facility, the MMU translation can stop at the
segment table already, pointing to a 1 MB block. And while we're
at it, move the page table entry handling to a separate function,
too, as suggested by Alexander Graf.
Acked-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Thomas Huth <thuth@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
The real-to-absolute address translation in mmu_translate() was
missing the second part for translating the page at the prefix
address back to the 0 page. And while we're at it, also moved the
code into a separate helper function since this might come in
handy for other parts of the code, too.
Signed-off-by: Thomas Huth <thuth@linux.vnet.ibm.com>
Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Reviewed-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
* remotes/riku/linux-user-for-upstream:
linux-user: fix getrusage and wait4 failures with invalid rusage struct
linux-user/elfload.c: Support ARM HWCAP2 flags
linux-user/elfload.c: Fix A64 code which was incorrectly acting like A32
linux-user/elfload.c: Update ARM HWCAP bits
linux-user/elfload.c: Fix incorrect ARM HWCAP bits
linux-user: remove configure option for setting uname release
linux-user: move uname functions to uname.c
linux-user: rename cpu-uname -> uname
linux-user/signal.c: Set fault address in AArch64 signal info
linux-user: avoid using glibc internals in _syscall5 and in definition of target_sigevent struct
linux-user: Handle arches with llseek instead of _llseek
linux-user: Add support for SCM_CREDENTIALS.
linux-user: Move if-elses to a switch statement.
linux-user: Assert stack used for auxvec, envp, argv
linux-user: Add /proc/self/exe open forwarding
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
expose the count that logs the times of updating the dirty bitmap to
end user.
Signed-off-by: ChenLiang <chenliang88@huawei.com>
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Add counts to log the times of updating the dirty bitmap.
Signed-off-by: ChenLiang <chenliang88@huawei.com>
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
The page may not be inserted into cache after executing save_xbzrle_page.
In case of failure to insert, the original page should be sent rather
than the page in the cache.
Signed-off-by: ChenLiang <chenliang88@huawei.com>
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
version_id is checked twice in the ram_load.
Signed-off-by: ChenLiang <chenliang88@huawei.com>
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Coverity defects 1005733 & 1005734 complain about passing a negative
value to closesocket in the error paths on incoming migration.
Stash the error value and print it in the message (previously we gave
no indication of the reason for the failure)
Use error_report
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Initialising the XBZRLE.lock earlier simplifies the lock use.
Based on Markus's patch in:
http://lists.gnu.org/archive/html/qemu-devel/2014-03/msg03879.html
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Gonglei <arei.gonglei@huawei.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Provide ram_mig_init (like blk_mig_init) for vl.c to initialise stuff
to do with ram migration (currently in arch_init.c).
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Gonglei <arei.gonglei@huawei.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
This is a fix for a bug* triggered by a migration after hot unplugging
a few virtio-net NICs, that caused migration never to converge, because
'migration_dirty_pages' is incorrectly initialised.
'migration_dirty_pages' is used as a tally of the number of outstanding
dirty pages, to give the migration code an idea of how much more data
will need to be transferred, and thus whether it can end the iterative
phase.
It was initialised to the total size of the RAMBlock address space,
however hotunplug can leave this space sparse, and hence
migration_dirty_pages ended up too large.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
(* https://bugzilla.redhat.com/show_bug.cgi?id=1074913 )
Signed-off-by: Juan Quintela <quintela@redhat.com>
Make qemu_peek_buffer repeatedly call fill_buffer until it gets
all the data it requires, or until there is an error.
At the moment, qemu_peek_buffer will try one qemu_fill_buffer if there
isn't enough data waiting, however the kernel is entitled to return
just a few bytes, and still leave qemu_peek_buffer with less bytes
than it needed. I've seen this fail in a dev world, and I think it
could theoretically fail in the peeking of the subsection headers in
the current world.
Comment qemu_peek_byte to point out it's not guaranteed to work for
non-continuous peeks
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: ChenLiang <chenliang0016@icloud.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
QEMU will assert if you attempt to start an outgoing migration on
a QEMU that's sitting waiting for an incoming migration (started
with -incoming), so disallow it with a proper error.
(This is a fix for https://bugzilla.redhat.com/show_bug.cgi?id=1086987 )
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Malformed input can have config_len in migration stream
exceed the array size allocated on destination, the
result will be heap overflow.
To fix, that config_len matches on both sides.
CVE-2014-0182
Reported-by: "Dr. David Alan Gilbert" <dgilbert@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
--
v2: use %ix and %zx to print config_len values
Signed-off-by: Juan Quintela <quintela@redhat.com>
CVE-2013-4149 QEMU 1.3.0 out-of-bounds buffer write in
virtio_net_load()@hw/net/virtio-net.c
> } else if (n->mac_table.in_use) {
> uint8_t *buf = g_malloc0(n->mac_table.in_use);
We are allocating buffer of size n->mac_table.in_use
> qemu_get_buffer(f, buf, n->mac_table.in_use * ETH_ALEN);
and read to the n->mac_table.in_use size buffer n->mac_table.in_use *
ETH_ALEN bytes, corrupting memory.
If adversary controls state then memory written there is controlled
by adversary.
Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
CVE-2013-4534
opp->nb_cpus is read from the wire and used to determine how many
IRQDest elements to read into opp->dst[]. If the value exceeds the
length of opp->dst[], MAX_CPU, opp->dst[] can be overrun with arbitrary
data from the wire.
Fix this by failing migration if the value read from the wire exceeds
MAX_CPU.
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Reviewed-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
CVE-2013-4537
s->arglen is taken from wire and used as idx
in ssi_sd_transfer().
Validate it before access.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
At the moment we require vmstate definitions to set minimum_version_id_old
to the same value as minimum_version_id if they do not provide a
load_state_old handler. Since the load_state_old functionality is
required only for a handful of devices that need to retain migration
compatibility with a pre-vmstate implementation, this means the bulk
of devices have pointless boilerplate. Relax the definition so that
minimum_version_id_old is ignored if there is no load_state_old handler.
Note that under the old scheme we would segfault if the vmstate
specified a minimum_version_id_old that was less than minimum_version_id
but did not provide a load_state_old function, and the incoming state
specified a version number between minimum_version_id_old and
minimum_version_id. Under the new scheme this will just result in
our failing the migration.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
CVE-2013-4541
s->setup_len and s->setup_index are fed into usb_packet_copy as
size/offset into s->data_buf, it's possible for invalid state to exploit
this to load arbitrary data.
setup_len and setup_index should be checked to make sure
they are not negative.
Cc: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
As the macro verifies the value is positive, rename it
to make the function clearer.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
CVE-2013-4542
hw/scsi/scsi-bus.c invokes load_request.
virtio_scsi_load_request does:
qemu_get_buffer(f, (unsigned char *)&req->elem, sizeof(req->elem));
this probably can make elem invalid, for example,
make in_num or out_num huge, then:
virtio_scsi_parse_req(s, vs->cmd_vqs[n], req);
will do:
if (req->elem.out_num > 1) {
qemu_sgl_init_external(req, &req->elem.out_sg[1],
&req->elem.out_addr[1],
req->elem.out_num - 1);
} else {
qemu_sgl_init_external(req, &req->elem.in_sg[1],
&req->elem.in_addr[1],
req->elem.in_num - 1);
}
and this will access out of array bounds.
Note: this adds security checks within assert calls since
SCSIBusInfo's load_request cannot fail.
For now simply disable builds with NDEBUG - there seems
to be little value in supporting these.
Cc: Andreas Färber <afaerber@suse.de>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
CVE-2013-4540
Within scoop_gpio_handler_update, if prev_level has a high bit set, then
we get bit > 16 and that causes a buffer overrun.
Since prev_level comes from wire indirectly, this can
happen on invalid state load.
Similarly for gpio_level and gpio_dir.
To fix, limit to 16 bit.
Reported-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
CVE-2013-4539
s->precision, nextprecision, function and nextfunction
come from wire and are used
as idx into resolution[] in TSC_CUT_RESOLUTION.
Validate after load to avoid buffer overrun.
Cc: Andreas Färber <afaerber@suse.de>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
CVE-2013-4538
s->cmd_len used as index in ssd0323_transfer() to store 32-bit field.
Possible this field might then be supplied by guest to overwrite a
return addr somewhere. Same for row/col fields, which are indicies into
framebuffer array.
To fix validate after load.
Additionally, validate that the row/col_start/end are within bounds;
otherwise the guest can provoke an overrun by either setting the _end
field so large that the row++ increments just walk off the end of the
array, or by setting the _start value to something bogus and then
letting the "we hit end of row" logic reset row to row_start.
For completeness, validate mode as well.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Juan Quintela <quintela@redhat.com>
CVE-2013-4533
s->rx_level is read from the wire and used to determine how many bytes
to subsequently read into s->rx_fifo[]. If s->rx_level exceeds the
length of s->rx_fifo[] the buffer can be overrun with arbitrary data
from the wire.
Fix this by validating rx_level against the size of s->rx_fifo.
Cc: Don Koch <dkoch@verizon.com>
Reported-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Don Koch <dkoch@verizon.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
CVE-2013-4535
CVE-2013-4536
Both virtio-block and virtio-serial read,
VirtQueueElements are read in as buffers, and passed to
virtqueue_map_sg(), where num_sg is taken from the wire and can force
writes to indicies beyond VIRTQUEUE_MAX_SIZE.
To fix, validate num_sg.
Reported-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Cc: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
CVE-2013-6399
vdev->queue_sel is read from the wire, and later used in the
emulation code as an index into vdev->vq[]. If the value of
vdev->queue_sel exceeds the length of vdev->vq[], currently
allocated to be VIRTIO_PCI_QUEUE_MAX elements, subsequent PIO
operations such as VIRTIO_PCI_QUEUE_PFN can be used to overrun
the buffer with arbitrary data originating from the source.
Fix this by failing migration if the value from the wire exceeds
VIRTIO_PCI_QUEUE_MAX.
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Juan Quintela <quintela@redhat.com>
CVE-2013-4531
cpreg_vmstate_indexes is a VARRAY_INT32. A negative value for
cpreg_vmstate_array_len will cause a buffer overflow.
VMSTATE_INT32_LE was supposed to protect against this
but doesn't because it doesn't validate that input is
non-negative.
Fix this macro to valide the value appropriately.
The only other user of VMSTATE_INT32_LE doesn't
ever use negative numbers so it doesn't care.
Reported-by: Anthony Liguori <anthony@codemonkey.ws>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
CVE-2013-4530
pl022.c did not bounds check tx_fifo_head and
rx_fifo_head after loading them from file and
before they are used to dereference array.
Reported-by: Michael S. Tsirkin <mst@redhat.com
Reported-by: Anthony Liguori <anthony@codemonkey.ws>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
4) CVE-2013-4529
hw/pci/pcie_aer.c pcie aer log can overrun the buffer if log_num is
too large
There are two issues in this file:
1. log_max from remote can be larger than on local
then buffer will overrun with data coming from state file.
2. log_num can be larger then we get data corruption
again with an overflow but not adversary controlled.
Fix both issues.
Reported-by: Anthony Liguori <anthony@codemonkey.ws>
Reported-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
