I'm converting from qdev_create()/qdev_init_nofail() to
qdev_new()/qdev_realize_and_unref(); recent commit "qdev: New
qdev_new(), qdev_realize(), etc." explains why.
USB devices use qdev_create() through usb_create().
Provide usb_new() and usb_realize_and_unref() for converting USB
devices.
Cc: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20200610053247.1583243-27-armbru@redhat.com>
Same transformation as in the previous commit. Manual, because
convincing Coccinelle to transform these cases is somewhere between
not worthwhile and infeasible (at least for me).
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20200610053247.1583243-11-armbru@redhat.com>
The CPUReadMemoryFunc/CPUWriteMemoryFunc typedefs are legacy
remnant from before the conversion to MemoryRegions.
Since they are now only used in tusb6010.c and hcd-musb.c,
move them to "hw/usb/musb.h" and rename them appropriately.
Suggested-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20200601141536.15192-4-f4bug@amsat.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Move the declarations for the MUSB-HDRC USB2.0 OTG compliant core
into a separate header.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20200601141536.15192-3-f4bug@amsat.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The dwc-hsotg (dwc2) USB host depends on a short packet to
indicate the end of an IN transfer. The usb-storage driver
currently doesn't provide this, so fix it.
I have tested this change rather extensively using a PC
emulation with xhci, ehci, and uhci controllers, and have
not observed any regressions.
Signed-off-by: Paul Zimmerman <pauldzim@gmail.com>
Message-id: 20200520235349.21215-6-pauldzim@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add the dwc-hsotg (dwc2) USB host controller emulation code.
Based on hw/usb/hcd-ehci.c and hw/usb/hcd-ohci.c.
Note that to use this with the dwc-otg driver in the Raspbian
kernel, you must pass the option "dwc_otg.fiq_fsm_enable=0" on
the kernel command line.
Emulation of slave mode and of descriptor-DMA mode has not been
implemented yet. These modes are seldom used.
I have used some on-line sources of information while developing
this emulation, including:
http://www.capital-micro.com/PDF/CME-M7_Family_User_Guide_EN.pdf
which has a pretty complete description of the controller starting
on page 370.
https://sourceforge.net/p/wive-ng/wive-ng-mt/ci/master/tree/docs/DataSheets/RT3050_5x_V2.0_081408_0902.pdf
which has a description of the controller registers starting on
page 130.
Thanks to Felippe Mathieu-Daude for providing a cleaner method
of implementing the memory regions for the controller registers.
Signed-off-by: Paul Zimmerman <pauldzim@gmail.com>
Message-id: 20200520235349.21215-5-pauldzim@gmail.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add the dwc-hsotg (dwc2) USB host controller state definitions.
Mostly based on hw/usb/hcd-ehci.h.
Signed-off-by: Paul Zimmerman <pauldzim@gmail.com>
Message-id: 20200520235349.21215-4-pauldzim@gmail.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Replace
error_report("...: %s", ..., error_get_pretty(err));
by
error_reportf_err(err, "...: ", ...);
One of the replaced messages lacked a colon. Add it.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200505101908.6207-6-armbru@redhat.com>
usbback_portid_add() leaks the error when qdev_device_add() fails.
Fix that. While there, use the error to improve the error message.
The qemu_opts_from_qdict() similarly leaks on failure. But any
failure there is a programming error. Pass &error_abort.
Fixes: 816ac92ef7
Cc: Stefano Stabellini <sstabellini@kernel.org>
Cc: Anthony Perard <anthony.perard@citrix.com>
Cc: Paul Durrant <paul@xen.org>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: xen-devel@lists.xenproject.org
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20200505101908.6207-3-armbru@redhat.com>
Acked-by: Paul Durrant <paul@xen.org>
Devices may have component devices and buses.
Device realization may fail. Realization is recursive: a device's
realize() method realizes its components, and device_set_realized()
realizes its buses (which should in turn realize the devices on that
bus, except bus_set_realized() doesn't implement that, yet).
When realization of a component or bus fails, we need to roll back:
unrealize everything we realized so far. If any of these unrealizes
failed, the device would be left in an inconsistent state. Must not
happen.
device_set_realized() lets it happen: it ignores errors in the roll
back code starting at label child_realize_fail.
Since realization is recursive, unrealization must be recursive, too.
But how could a partly failed unrealize be rolled back? We'd have to
re-realize, which can fail. This design is fundamentally broken.
device_set_realized() does not roll back at all. Instead, it keeps
unrealizing, ignoring further errors.
It can screw up even for a device with no buses: if the lone
dc->unrealize() fails, it still unregisters vmstate, and calls
listeners' unrealize() callback.
bus_set_realized() does not roll back either. Instead, it stops
unrealizing.
Fortunately, no unrealize method can fail, as we'll see below.
To fix the design error, drop parameter @errp from all the unrealize
methods.
Any unrealize method that uses @errp now needs an update. This leads
us to unrealize() methods that can fail. Merely passing it to another
unrealize method cannot cause failure, though. Here are the ones that
do other things with @errp:
* virtio_serial_device_unrealize()
Fails when qbus_set_hotplug_handler() fails, but still does all the
other work. On failure, the device would stay realized with its
resources completely gone. Oops. Can't happen, because
qbus_set_hotplug_handler() can't actually fail here. Pass
&error_abort to qbus_set_hotplug_handler() instead.
* hw/ppc/spapr_drc.c's unrealize()
Fails when object_property_del() fails, but all the other work is
already done. On failure, the device would stay realized with its
vmstate registration gone. Oops. Can't happen, because
object_property_del() can't actually fail here. Pass &error_abort
to object_property_del() instead.
* spapr_phb_unrealize()
Fails and bails out when remove_drcs() fails, but other work is
already done. On failure, the device would stay realized with some
of its resources gone. Oops. remove_drcs() fails only when
chassis_from_bus()'s object_property_get_uint() fails, and it can't
here. Pass &error_abort to remove_drcs() instead.
Therefore, no unrealize method can fail before this patch.
device_set_realized()'s recursive unrealization via bus uses
object_property_set_bool(). Can't drop @errp there, so pass
&error_abort.
We similarly unrealize with object_property_set_bool() elsewhere,
always ignoring errors. Pass &error_abort instead.
Several unrealize methods no longer handle errors from other unrealize
methods: virtio_9p_device_unrealize(),
virtio_input_device_unrealize(), scsi_qdev_unrealize(), ...
Much of the deleted error handling looks wrong anyway.
One unrealize methods no longer ignore such errors:
usb_ehci_pci_exit().
Several realize methods no longer ignore errors when rolling back:
v9fs_device_realize_common(), pci_qdev_unrealize(),
spapr_phb_realize(), usb_qdev_realize(), vfio_ccw_realize(),
virtio_device_realize().
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20200505152926.18877-17-armbru@redhat.com>
Several functions can't fail anymore: ich9_pm_add_properties(),
device_add_bootindex_property(), ppc_compat_add_property(),
spapr_caps_add_properties(), PropertyInfo.create(). Drop their @errp
parameter.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20200505152926.18877-16-armbru@redhat.com>
The only way object_property_add() can fail is when a property with
the same name already exists. Since our property names are all
hardcoded, failure is a programming error, and the appropriate way to
handle it is passing &error_abort.
Same for its variants, except for object_property_add_child(), which
additionally fails when the child already has a parent. Parentage is
also under program control, so this is a programming error, too.
We have a bit over 500 callers. Almost half of them pass
&error_abort, slightly fewer ignore errors, one test case handles
errors, and the remaining few callers pass them to their own callers.
The previous few commits demonstrated once again that ignoring
programming errors is a bad idea.
Of the few ones that pass on errors, several violate the Error API.
The Error ** argument must be NULL, &error_abort, &error_fatal, or a
pointer to a variable containing NULL. Passing an argument of the
latter kind twice without clearing it in between is wrong: if the
first call sets an error, it no longer points to NULL for the second
call. ich9_pm_add_properties(), sparc32_ledma_realize(),
sparc32_dma_realize(), xilinx_axidma_realize(), xilinx_enet_realize()
are wrong that way.
When the one appropriate choice of argument is &error_abort, letting
users pick the argument is a bad idea.
Drop parameter @errp and assert the preconditions instead.
There's one exception to "duplicate property name is a programming
error": the way object_property_add() implements the magic (and
undocumented) "automatic arrayification". Don't drop @errp there.
Instead, rename object_property_add() to object_property_try_add(),
and add the obvious wrapper object_property_add().
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20200505152926.18877-15-armbru@redhat.com>
[Two semantic rebase conflicts resolved]
The function usbback_packet_complete() currently takes a USBPacket*,
which must be a pointer to the packet field within a struct
usbback_req; the function uses container_of() to get the struct
usbback_req* given the USBPacket*.
This is unnecessarily confusing (and in particular it confuses the
Coverity Scan analysis, resulting in the false positive CID 1421919
where it thinks that we write off the end of the structure). Since
both callsites already have the pointer to the struct usbback_req,
just pass that in directly.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Anthony PERARD <anthony.perard@citrix.com>
Message-Id: <20200323164318.26567-1-peter.maydell@linaro.org>
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
* get/set_uint cleanups (Felipe)
* Lock guard support (Stefan)
* MemoryRegion ownership cleanup (Philippe)
* AVX512 optimization for buffer_is_zero (Robert)
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)
iQEcBAABAgAGBQJecOZiAAoJEL/70l94x66DgGkH/jpY4IgqlSAAWCgaxfe1n1vg
ahSzSLrC8wiJq2Jxbmxn+5BbH6BxQ9ibflsY5bvCY/sTb7UlOFCPkFhQ2iUgplkw
ciB5UfgCA6OHpKEhpHhXtzlybtNOlxXNWYJ1SrcVXbRES8f7XdhMKs15mnJJuOOE
k/tuZo/44yZRJl0Cv+nkvIFcCVgyu1q0Lln/1MMPngY2r9gt893cY9feTBSSWgnp
+7HZr5TXI7mcIytczFKzbdujlG4391DGejKX66IIxGcWg9vXS7TwAStzH1vSKVfJ
73SKZBoCU5gpHHHC+dqVyouMerV+UE+WQPNtF+LCsNgJBw/2NXc1ZgDrtz1OI2c=
=+LRX
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into staging
* Bugfixes all over the place
* get/set_uint cleanups (Felipe)
* Lock guard support (Stefan)
* MemoryRegion ownership cleanup (Philippe)
* AVX512 optimization for buffer_is_zero (Robert)
# gpg: Signature made Tue 17 Mar 2020 15:01:54 GMT
# gpg: using RSA key BFFBD25F78C7AE83
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" [full]
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" [full]
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1
# Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83
* remotes/bonzini/tags/for-upstream: (62 commits)
hw/arm: Let devices own the MemoryRegion they create
hw/arm: Remove unnecessary memory_region_set_readonly() on ROM alias
hw/ppc/ppc405: Use memory_region_init_rom() with read-only regions
hw/arm/stm32: Use memory_region_init_rom() with read-only regions
hw/char: Let devices own the MemoryRegion they create
hw/riscv: Let devices own the MemoryRegion they create
hw/dma: Let devices own the MemoryRegion they create
hw/display: Let devices own the MemoryRegion they create
hw/core: Let devices own the MemoryRegion they create
scripts/cocci: Patch to let devices own their MemoryRegions
scripts/cocci: Patch to remove unnecessary memory_region_set_readonly()
scripts/cocci: Patch to detect potential use of memory_region_init_rom
hw/sparc: Use memory_region_init_rom() with read-only regions
hw/sh4: Use memory_region_init_rom() with read-only regions
hw/riscv: Use memory_region_init_rom() with read-only regions
hw/ppc: Use memory_region_init_rom() with read-only regions
hw/pci-host: Use memory_region_init_rom() with read-only regions
hw/net: Use memory_region_init_rom() with read-only regions
hw/m68k: Use memory_region_init_rom() with read-only regions
hw/display: Use memory_region_init_rom() with read-only regions
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* hw/arm/pxa2xx: Do not wire up OHCI for PXA255
* aspeed/smc: Fix number of dummy cycles for FAST_READ_4 command
* m25p80: Improve command handling for Jedec and unsupported commands
* hw/net/imx_fec: write TGSR and TCSR3 in imx_enet_write()
* hw/arm/fsl-imx6, imx6ul: Wire up USB controllers
* hw/arm/fsl-imx6ul: Instantiate unimplemented pwm and can devices
-----BEGIN PGP SIGNATURE-----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=SDMr
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/pmaydell/tags/pull-target-arm-20200317' into staging
target-arm:
* hw/arm/pxa2xx: Do not wire up OHCI for PXA255
* aspeed/smc: Fix number of dummy cycles for FAST_READ_4 command
* m25p80: Improve command handling for Jedec and unsupported commands
* hw/net/imx_fec: write TGSR and TCSR3 in imx_enet_write()
* hw/arm/fsl-imx6, imx6ul: Wire up USB controllers
* hw/arm/fsl-imx6ul: Instantiate unimplemented pwm and can devices
# gpg: Signature made Tue 17 Mar 2020 11:40:01 GMT
# gpg: using RSA key E1A5C593CD419DE28E8315CF3C2525ED14360CDE
# gpg: issuer "peter.maydell@linaro.org"
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>" [ultimate]
# gpg: aka "Peter Maydell <pmaydell@gmail.com>" [ultimate]
# gpg: aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>" [ultimate]
# Primary key fingerprint: E1A5 C593 CD41 9DE2 8E83 15CF 3C25 25ED 1436 0CDE
* remotes/pmaydell/tags/pull-target-arm-20200317:
hw/arm/pxa2xx: Do not wire up OHCI for PXA255
aspeed/smc: Fix number of dummy cycles for FAST_READ_4 command
m25p80: Improve command handling for unsupported commands
m25p80: Improve command handling for Jedec commands
m25p80: Convert to support tracing
hw/net/imx_fec: write TGSR and TCSR3 in imx_enet_write()
hw/arm/fsl-imx6: Wire up USB controllers
hw/arm/fsl-imx6ul: Wire up USB controllers
hw/arm/fsl-imx6ul: Instantiate unimplemented pwm and can devices
hw/arm/fsl-imx6ul: Fix USB interrupt numbers
hw/usb: Add basic i.MX USB Phy support
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add basic USB PHY support as implemented in i.MX23, i.MX28, i.MX6,
and i.MX7 SoCs.
The only support really needed - at least to boot Linux - is support
for soft reset, which needs to reset various registers to their initial
value. Otherwise, just record register values.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Message-id: 20200313014551.12554-2-linux@roeck-us.net
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Linux guests wait ~30 seconds when closing the emulated /dev/ttyUSB0.
During that time, the kernel driver is sending many control URBs
requesting GetModemStat (5). Real hardware returns a status with
FTDI_THRE (Transmitter Holding Register) and FTDI_TEMT (Transmitter
Empty) set. QEMU leaves them clear, and it seems Linux is waiting for
FTDI_TEMT to be set to indicate the tx queue is empty before closing.
Set the bits when responding to a GetModemStat query and avoid the
shutdown delay.
Signed-off-by: Jason Andryuk <jandryuk@gmail.com>
Reviewed-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Message-id: 20200316174610.115820-5-jandryuk@gmail.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
A FTDI USB adapter on an xHCI controller can send 512 byte USB packets.
These are 8 * ( 2 bytes header + 62 bytes data). A 384 byte receive
buffer is insufficient to fill a 512 byte packet, so bump the receive
size to 496 ( 512 - 2 * 8 ).
Signed-off-by: Jason Andryuk <jandryuk@gmail.com>
Reviewed-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Message-id: 20200316174610.115820-4-jandryuk@gmail.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
usb-serial has issues with xHCI controllers where data is lost in the
VM. Inspecting the URBs in the guest, EHCI starts every 64 byte boundary
(wMaxPacketSize) with a header. EHCI hands packets into
usb_serial_token_in() with size 64, so these cannot cross the 64 byte
boundary. The xHCI controller has packets of 512 bytes and the usb-serial
will just write through the 64 byte boundary. In the guest, this means
data bytes are interpreted as header, so data bytes don't make it out
the serial interface.
Re-work usb_serial_token_in to chunk data into 64 byte units - 2 byte
header and 62 bytes data. The Linux driver reads wMaxPacketSize to find
the chunk size, so we match that.
Real hardware was observed to pass in 512 byte URBs (496 bytes data +
8 * 2 byte headers). Since usb-serial only buffers 384 bytes of data,
usb-serial will pass in 6 64 byte blocks and 1 12 byte partial block for
462 bytes max.
Signed-off-by: Jason Andryuk <jandryuk@gmail.com>
Message-id: 20200316174610.115820-3-jandryuk@gmail.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
We'll be adding a loop, so move the code into a helper function. breaks
are replaced with returns. While making this change, add braces to
single line if statements to comply with coding style and keep
checkpatch happy.
Signed-off-by: Jason Andryuk <jandryuk@gmail.com>
Message-id: 20200316174610.115820-2-jandryuk@gmail.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The USB descriptor sizes are specified as 16-bit for idVendor /
idProduct, and 8-bit for bInterfaceClass / bInterfaceSubClass /
bInterfaceProtocol. Doing so we reduce the usbredir_raw_serial_ids[]
and usbredir_ftdi_serial_ids[] arrays from 16KiB to 6KiB (size
reported on x86_64 host, building with --extra-cflags=-Os).
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Description copied from Linux kernel commit from Gustavo A. R. Silva
(see [3]):
--v-- description start --v--
The current codebase makes use of the zero-length array language
extension to the C90 standard, but the preferred mechanism to
declare variable-length types such as these ones is a flexible
array member [1], introduced in C99:
struct foo {
int stuff;
struct boo array[];
};
By making use of the mechanism above, we will get a compiler
warning in case the flexible array does not occur last in the
structure, which will help us prevent some kind of undefined
behavior bugs from being unadvertenly introduced [2] to the
Linux codebase from now on.
--^-- description end --^--
Do the similar housekeeping in the QEMU codebase (which uses
C99 since commit 7be41675f7).
All these instances of code were found with the help of the
following Coccinelle script:
@@
identifier s, m, a;
type t, T;
@@
struct s {
...
t m;
- T a[0];
+ T a[];
};
@@
identifier s, m, a;
type t, T;
@@
struct s {
...
t m;
- T a[0];
+ T a[];
} QEMU_PACKED;
[1] https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html
[2] https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=76497732932f
[3] https://git.kernel.org/pub/scm/linux/kernel/git/gustavoars/linux.git/commit/?id=17642a2fbd2c1
Inspired-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The Allwinner H3 System on Chip contains multiple USB 2.0 bus
connections which provide software access using the Enhanced
Host Controller Interface (EHCI) and Open Host Controller
Interface (OHCI) interfaces. This commit adds support for
both interfaces in the Allwinner H3 System on Chip.
Signed-off-by: Niek Linnenbank <nieklinnenbank@gmail.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20200311221854.30370-5-nieklinnenbank@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200308092440.23564-2-mlevitsk@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
The USB models related to storage don't need anything from
"ui/console.h". Remove it.
Acked-by: John Snow <jsnow@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20200228114649.12818-6-philmd@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
The "again" assignment is meaningless before g_assert_not_reached.
In addition, the break statements no longer needs to be after
g_assert_not_reached.
Clang static code analyzer show warning:
hw/usb/hcd-ehci.c:2108:13: warning: Value stored to 'again' is never read
again = -1;
^ ~~
Reported-by: Euler Robot <euler.robot@huawei.com>
Signed-off-by: Chen Qun <kuhn.chenqun@huawei.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200226084647.20636-13-kuhn.chenqun@huawei.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Currently usb-serial devices are unable to send data into guests with
the xhci controller. Data is copied into the usb-serial's buffer, but
it is not sent into the guest. Data coming out of the guest works
properly. usb-serial devices work properly with ehci.
Have usb-serial call usb_wakeup() when receiving data from the chardev.
This seems to notify the xhci controller and fix inbound data flow.
Also add USB_CFG_ATT_WAKEUP to the device's bmAttributes. This matches
a real FTDI serial adapter's bmAttributes.
Signed-off-by: Jason Andryuk <jandryuk@gmail.com>
Message-id: 20200306140917.26726-1-jandryuk@gmail.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Xilinx USB devices are now instantiated through TYPE_CHIPIDEA,
and xlnx support in the EHCI code is no longer needed.
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 20200215122354.13706-3-linux@roeck-us.net
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
We'll use this property in a follow-up patch to insantiate an EHCI
bus with companion support.
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Tested-by: Niek Linnenbank <nieklinnenbank@gmail.com>
Message-id: 20200217204812.9857-3-linux@roeck-us.net
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
We need to be able to use OHCISysBusState outside hcd-ohci.c, so move it
to its include file.
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Tested-by: Niek Linnenbank <nieklinnenbank@gmail.com>
Message-id: 20200217204812.9857-2-linux@roeck-us.net
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
For usb2 bMaxPacketSize0 is "n", for usb3 it is "1 << n",
so it must be 9 not 64 ...
rom "Universal Serial Bus 3.1 Specification":
If the device is operating at Gen X speed, the bMaxPacketSize0
field shall be set to 09H indicating a 512-byte maximum packet.
An Enhanced SuperSpeed device shall not support any other maximum
packet sizes for the default control pipe (endpoint 0) control
endpoint.
We now announce a 512-byte maximum packet.
Fixes: 89a453d4a5 ("uas-uas: usb3 streams")
Reported-by: Benjamin David Lunt <fys@fysnet.net>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20200117073716.31335-1-kraxel@redhat.com
We have many files that apparently do not depend on the target CPU
configuration, i.e. which can be put into common-obj-y instead of
obj-y. This way, the code can be shared for example between
qemu-system-arm and qemu-system-aarch64, or the various big and
little endian variants like qemu-system-sh4 and qemu-system-sh4eb,
so that we do not have to compile the code multiple times anymore.
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20200130133841.10779-1-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Factor out slot status check into a helper function. Add an additional
check after completing transfers. This is needed in case a guest
queues multiple transfers in a row and a device unplug happens while
qemu processes them.
Buglink: https://bugzilla.redhat.com/show_bug.cgi?id=1786413
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20200107083606.12393-1-kraxel@redhat.com
start vm with libvirt, when GuestOS running, enter poweroff command using
the xhci keyboard, then ASAN shows memory leak stack：
Direct leak of 80 byte(s) in 5 object(s) allocated from:
#0 0xfffd1e6431cb in __interceptor_malloc (/lib64/libasan.so.4+0xd31cb)
#1 0xfffd1e107163 in g_malloc (/lib64/libglib-2.0.so.0+0x57163)
#2 0xaaad39051367 in qemu_sglist_init /qemu/dma-helpers.c:43
#3 0xaaad3947c407 in pci_dma_sglist_init /qemu/include/hw/pci/pci.h:842
#4 0xaaad3947c407 in xhci_xfer_create_sgl /qemu/hw/usb/hcd-xhci.c:1446
#5 0xaaad3947c407 in xhci_setup_packet /qemu/hw/usb/hcd-xhci.c:1618
#6 0xaaad3948625f in xhci_submit /qemu/hw/usb/hcd-xhci.c:1827
#7 0xaaad3948625f in xhci_fire_transfer /qemu/hw/usb/hcd-xhci.c:1839
#8 0xaaad3948625f in xhci_kick_epctx /qemu/hw/usb/hcd-xhci.c:1991
#9 0xaaad3948f537 in xhci_doorbell_write /qemu/hw/usb/hcd-xhci.c:3158
#10 0xaaad38bcbfc7 in memory_region_write_accessor /qemu/memory.c:483
#11 0xaaad38bc654f in access_with_adjusted_size /qemu/memory.c:544
#12 0xaaad38bd1877 in memory_region_dispatch_write /qemu/memory.c:1482
#13 0xaaad38b1c77f in flatview_write_continue /qemu/exec.c:3167
#14 0xaaad38b1ca83 in flatview_write /qemu/exec.c:3207
#15 0xaaad38b268db in address_space_write /qemu/exec.c:3297
#16 0xaaad38bf909b in kvm_cpu_exec /qemu/accel/kvm/kvm-all.c:2383
#17 0xaaad38bb063f in qemu_kvm_cpu_thread_fn /qemu/cpus.c:1246
#18 0xaaad39821c93 in qemu_thread_start /qemu/util/qemu-thread-posix.c:519
#19 0xfffd1c8378bb (/lib64/libpthread.so.0+0x78bb)
#20 0xfffd1c77616b (/lib64/libc.so.6+0xd616b)
Reported-by: Euler Robot <euler.robot@huawei.com>
Signed-off-by: Chen Qun <kuhn.chenqun@huawei.com>
Message-id: 20200110105855.81144-1-kuhn.chenqun@huawei.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
I've got a case where usbredir_write manages to call back into itself
via spice; this patch causes the recursion to fail (0 bytes) the write;
this seems to avoid the deadlock I was previously seeing.
I can't say I fully understand the interaction of usbredir and spice;
but there are a few similar guards in spice and usbredir
to catch other cases especially onces also related to spice_server_char_device_wakeup
This case seems to be triggered by repeated migration+repeated
reconnection of the viewer; but my debugging suggests the migration
finished before this hits.
The backtrace of the hang looks like:
reds_handle_ticket
reds_handle_other_links
reds_channel_do_link
red_channel_connect
spicevmc_connect
usbredir_create_parser
usbredirparser_do_write
usbredir_write
qemu_chr_fe_write
qemu_chr_write
qemu_chr_write_buffer
spice_chr_write
spice_server_char_device_wakeup
red_char_device_wakeup
red_char_device_write_to_device
vmc_write
usbredirparser_do_write
usbredir_write
qemu_chr_fe_write
qemu_chr_write
qemu_chr_write_buffer
qemu_mutex_lock_impl
and we fail as we lang through qemu_chr_write_buffer's lock
twice.
Bug: https://bugzilla.redhat.com/show_bug.cgi?id=1752320
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20191218113012.13331-1-dgilbert@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
If the redirected device has this capability, Windows guest may
place the device into D2 and expect it to wake when the device
becomes active, but this will never happen. For example, when
internal Bluetooth adapter is redirected, keyboards and mice
connected to it do not work. Current commit removes this
capability (starting from machine 5.0)
Set 'usb-redir.suppress-remote-wake' property to 'off' to keep
'remote wake' as is or to 'on' to remove 'remote wake' on
4.2 or earlier.
Signed-off-by: Yuri Benditovich <yuri.benditovich@daynix.com>
Message-id: 20200108091044.18055-3-yuri.benditovich@daynix.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
If the redirected device has this capability, Windows guest may
place the device into D2 and expect it to wake when the device
becomes active, but this will never happen. For example, when
internal Bluetooth adapter is redirected, keyboards and mice
connected to it do not work. Current commit removes this
capability (starting from machine 5.0)
Set 'usb-host.suppress-remote-wake' property to 'off' to keep
'remote wake' as is or to 'on' to remove 'remote wake' on
4.2 or earlier.
Signed-off-by: Yuri Benditovich <yuri.benditovich@daynix.com>
Message-id: 20200108091044.18055-2-yuri.benditovich@daynix.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The Chardev events are listed in the QEMUChrEvent enum.
By using the enum in the IOEventHandler typedef we:
- make the IOEventHandler type more explicit (this handler
process out-of-band information, while the IOReadHandler
is in-band),
- help static code analyzers.
This patch was produced with the following spatch script:
@match@
expression backend, opaque, context, set_open;
identifier fd_can_read, fd_read, fd_event, be_change;
@@
qemu_chr_fe_set_handlers(backend, fd_can_read, fd_read, fd_event,
be_change, opaque, context, set_open);
@depends on match@
identifier opaque, event;
identifier match.fd_event;
@@
static
-void fd_event(void *opaque, int event)
+void fd_event(void *opaque, QEMUChrEvent event)
{
...
}
Then the typedef was modified manually in
include/chardev/char-fe.h.
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Acked-by: Corey Minyard <cminyard@mvista.com>
Acked-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20191218172009.8868-15-philmd@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The Chardev events are listed in the QEMUChrEvent enum. To be
able to use this enum in the IOEventHandler typedef, we need to
explicit all the events ignored by this frontend, to silent the
following GCC warning:
hw/usb/ccid-card-passthru.c: In function ‘ccid_card_vscard_event’:
hw/usb/ccid-card-passthru.c:314:5: error: enumeration value ‘CHR_EVENT_MUX_IN’ not handled in switch [-Werror=switch]
314 | switch (event) {
| ^~~~~~
hw/usb/ccid-card-passthru.c:314:5: error: enumeration value ‘CHR_EVENT_MUX_OUT’ not handled in switch [-Werror=switch]
hw/usb/ccid-card-passthru.c:314:5: error: enumeration value ‘CHR_EVENT_CLOSED’ not handled in switch [-Werror=switch]
cc1: all warnings being treated as errors
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20191218172009.8868-7-philmd@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The Chardev events are listed in the QEMUChrEvent enum. To be
able to use this enum in the IOEventHandler typedef, we need to
explicit all the events ignored by this frontend, to silent the
following GCC warning:
CC hw/usb/redirect.o
hw/usb/redirect.c: In function ‘usbredir_chardev_event’:
hw/usb/redirect.c:1361:5: error: enumeration value ‘CHR_EVENT_BREAK’ not handled in switch [-Werror=switch]
1361 | switch (event) {
| ^~~~~~
hw/usb/redirect.c:1361:5: error: enumeration value ‘CHR_EVENT_MUX_IN’ not handled in switch [-Werror=switch]
hw/usb/redirect.c:1361:5: error: enumeration value ‘CHR_EVENT_MUX_OUT’ not handled in switch [-Werror=switch]
cc1: all warnings being treated as errors
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20191218172009.8868-6-philmd@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The Chardev events are listed in the QEMUChrEvent enum. To be
able to use this enum in the IOEventHandler typedef, we need to
explicit all the events ignored by this frontend, to silent the
following GCC warning:
hw/usb/dev-serial.c: In function ‘usb_serial_event’:
hw/usb/dev-serial.c:468:5: error: enumeration value ‘CHR_EVENT_MUX_IN’ not handled in switch [-Werror=switch]
468 | switch (event) {
| ^~~~~~
hw/usb/dev-serial.c:468:5: error: enumeration value ‘CHR_EVENT_MUX_OUT’ not handled in switch [-Werror=switch]
cc1: all warnings being treated as errors
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20191218172009.8868-5-philmd@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The 'usb-redir' device requires the USB core code to work. Do not
link it when there is no USB support. This fixes:
$ qemu-system-tricore -M tricore_testboard -device usb-redir
qemu-system-tricore: -device usb-redir: No 'usb-bus' bus found for device 'usb-redir'
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20191231183216.6781-2-philmd@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20191205174635.18758-18-vsementsov@virtuozzo.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
We are going to remove the bluetooth backend, so the USB bluetooth
dongle can not work anymore. It's a completely optional device, no
board depends on it, so let's simply remove it now.
Message-Id: <20191120091014.16883-3-thuth@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
