This option is described in RFC 1783. As this is only an optional field,
we may ignore it in some situations and handle it in some others.
However, MS Windows 2003 PXE boot client requests a block size of the MTU
(most of the times 1472 bytes), and doesn't work if the option is not
acknowledged (with whatever value).
According to the RFC 1783, we cannot acknowledge the option with a bigger
value than the requested one.
As current implementation is using 512 bytes by block, accept the option
with a value of 512 if the option was specified, and don't acknowledge it
if it is not present or less than 512 bytes.
Signed-off-by: Hervé Poussineau <hpoussin@reactos.org>
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
RFC 1350 does not mention block count roll-over. However, a lot of TFTP servers
implement it to be able to transmit big files, so do it also.
Current block size is 512 bytes, so TFTP files were limited to 32 MB.
Signed-off-by: Hervé Poussineau <hpoussin@reactos.org>
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
When transferring a file, keep it open during the whole transfer,
instead of opening/closing it for each block.
Signed-off-by: Hervé Poussineau <hpoussin@reactos.org>
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Report from smatch:
slirp/tcp_subr.c:127 tcp_respond(17) error:
we previously assumed 'tp' could be null (see line 124)
Return if 'tp' is NULL.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
The type casts of pointers to long are not allowed
when sizeof(pointer) != sizeof(long).
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
in_addr_t isn't available on mingw32. Just use an unsigned long instead. I
considered typedef'ing in_addr_t on mingw32 but this would potentially be
brittle if mingw32 did introduce the type.
Cc: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Changes so translation of remote address to the host's ip address in
the virtual network happens for all addresses in the 127.0.0.0/8
network, not just 127.0.0.1.
This fixes so that hostfwd bound to addresses such as 127.0.0.2 works.
Signed-off-by: Anders Waldenborg <anders@0x63.nu>
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
MAX_TCPOPTLEN is being defined as 32. Darwin already has it as 40,
causing a warning. The value is only used to declare an array,
into which currently 4 bytes are written at most.
Therefore always override MAX_TCPOPTLEN for now.
Suggested-by: Jan Kiszka <jan.kiszka@web.de>
Reviewed-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Andreas Färber <andreas.faerber@web.de>
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Darwin has HTON*/NTOH* macros that on BE simply return the argument.
This is incompatible with SLIRP's use of these macros as a statement.
Undefine the macros in the HOST_WORDS_BIGENDIAN code path to redefine
these macros as no-op, as already done when they were undefined.
Suggested-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Andreas Färber <andreas.faerber@web.de>
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Commit b72210568e (slirp: clean up
conflicts with system headers) enclosed TCPOLEN_MAXSEG with an #ifdef
TCPOPT_EOL. This broke the build on illumos, which has TCPOPT_*
but not TCPOLEN_*.
Move them to their own #ifdef TCPOLEN_MAXSEG section to remedy this.
Cc: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Andreas Färber <andreas.faerber@web.de>
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
- remove qemu_calculate_timeout;
- explicitly size timeout to uint32_t;
- introduce slirp_update_timeout;
- pass NULL as timeout argument to select in case timeout is the maximum
value;
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Acked-by: Paul Brook <paul@codesourcery.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
As those defines are only used for w32,
they should be in the header file for w32.
All files which include slirp.h or qemu_socket.h also
include qemu-os-win32.h.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
This massively accelerates slirp reception speed: If data arrives
faster than the guest can read it from the input buffer, the file
descriptor for the corresponding socket was taken out of the fdset for
select. However, the event of the guest reading enough data from the
buffer was not signaled. Thus, the io-thread only noticed this change
on the next time-driven poll. Fix this by kicking the io-thread as
required.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Right now, slirp/slirp.h cannot include some system headers and,
indirectly, qemu_socket.h. Clean this up, and remove a duplicate
prototype that was introduced because of that.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Casting a pointer to an integer value must use uintptr_t or intptr_t
(not long) for portable code. MinGW-w64 requires this because
sizeof(long) != sizeof(void *) for w64 hosts, so casting to long
raises a compiler warning.
I use uintptr_t instead of intptr_t because changing the sign does not
matter here and casting pointers to unsigned values seems more
reasonable (the unsigned value is a non negative offset.
Cc: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Close & free sockets when shutting down a slirp instance, also release
all buffers.
CC: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
There is now a trivial check on entry of if_start for pending packets,
so we can drop the additional tracking via if_queued.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Another attempt to get this right: We need to carefully walk both the
fastq and the batchq in if_start while trying to send packets to
possibly not yet resolved hosts on the virtual network.
So far we just requeued a delayed packet where it was and then started
walking the queues from the top again - that couldn't work. Now we pre-
calculate the next packet in the queue so that the current one can
safely be removed if it was sent successfully. We also need to take into
account that the next packet can be from the same session if the current
one was sent and there are no other sessions.
CC: Fabien Chouteau <chouteau@adacore.com>
CC: Zhi Yong Wu <wuzhy@linux.vnet.ibm.com>
CC: Stefan Weil <sw@weilnetz.de>
Tested-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
if_start can be called recursively via if_encap. Avoid this as our
scheme of dequeuing packets is not compatible with this.
CC: Fabien Chouteau <chouteau@adacore.com>
CC: Zhi Yong Wu <wuzhy@linux.vnet.ibm.com>
CC: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Make sure that next_m always points to a packet if batchq is non-empty.
This will simplify walking the queues in if_start.
CC: Fabien Chouteau <chouteau@adacore.com>
CC: Zhi Yong Wu <wuzhy@linux.vnet.ibm.com>
CC: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
The guest network stack might DHCPREQUEST an address that the slirp built
in dhcp server can't let it have - for example if the guest has an old
leases file from another network configuration. In this case the dhcp
server should and does reject the request and prepares to send a DHCPNAK
to the client.
However, in this case the daddr variable in bootp_reply() is set to
0.0.0.0. Shortly afterwards, it unconditionally attempts to pre-insert the
new client address into the ARP table. This causes an assertion failure in
arp_address_add() because of the 0.0.0.0 address.
According to RFC2131, DHCPNAK messages for clients on the same subnet
must be sent to the broadcast address (S3.2, subpoint 2).
Cc: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
In case we requeued a packet that was the head of a longer session
queue, we failed to restore this ordering. Also, we did not properly
deal with changes to Slirp::next_m.
Instead of a cumbersome roll back, this fix simply avoids any changes
until we know if the packet was actually sent. Both fixes crashes due
to inconsistent queues and simplifies the logic.
Thanks to Zhi Yong Wu who found the reason for these crashes.
CC: Zhi Yong Wu <wuzhy@linux.vnet.ibm.com>
CC: Fabien Chouteau <chouteau@adacore.com>
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Remove duplicate ifs_init macros, reimplement the logic as static inline
in mbuf.h.
CC: Zhi Yong Wu <wuzhy@linux.vnet.ibm.com>
CC: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
By removing memset altogether (Patch from Stefan Hajnoczi, tested
compile only by me).
Signed-off-by: Alon Levy <alevy@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
9634d9031c disabled unused code.
This patch removes what was left.
If do_pty is 2, the function returns immediately, so any later checks
for do_pty == 2 will always fail and can be removed together with
the code which is never executed. Then variable master is unused and
can be removed, too.
This issue was detected by coverity.
Cc: Blue Swirl <blauwirbel@gmail.com>
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
The two new variables "arp_requested" and "expiration_date" in the mbuf
structure have been added after the variable-sized "m_dat_" array. The
variables have to be added before the m_dat_ array instead.
Without this patch, the expiration_date gets clobbered by code that
accesses the m_dat_ array.
I experienced this problem with the code in slirp/tftp.c: The
tftp_send_data() function created a new packet with the m_get()
function (which fills-in a default expiration_date value). Then the
TFTP code cleared the data section of the packet, which accidentially
also cleared the expiration_date. This zeroed expiration_date then
finally causes the packet to be discarded during if_start(), so that
TFTP packets were not transmitted anymore.
[Jan: added comment as suggested by Fabien ]
CC: Fabien Chouteau <chouteau@adacore.com>
Signed-off-by: Thomas Huth <thuth@linux.vnet.ibm.com>
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
ti points into the m buffer. But the latter may already be released
right after the dodata: label. Move the test before the potential
release.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Those blanks violate the coding conventions, see
scripts/checkpatch.pl.
Blanks missing after colons in the changed lines were added.
This patch does not try to fix tabs, long lines and other
problems in the changed lines, therefore checkpatch.pl reports
many violations.
Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This ensures we can cleanly signal the drop in case the connection timer
fires. So far we sent those frames to nowhere (target IP 0.0.0.0).
Found by the new assertion on invalid IPs in arp_table_search.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
* qemu-common.h is not a system include file, so it should be included
with "" instead of <>. Otherwise incremental builds might fail
because only local include files are checked for changes.
* linux-user/syscall.c included the file twice.
Cc: Riku Voipio <riku.voipio@iki.fi>
Cc: Jan Kiszka <jan.kiszka@siemens.com>
Acked-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Most changes were made using these commands:
git grep -la '__attribute__((packed))'|xargs perl -pi -e 's/__attribute__\(\(packed\)\)/QEMU_PACKED/'
git grep -la '__attribute__ ((packed))'|xargs perl -pi -e 's/__attribute__ \(\(packed\)\)/QEMU_PACKED/'
git grep -la '__attribute__((__packed__))'|xargs perl -pi -e 's/__attribute__\(\(__packed__\)\)/QEMU_PACKED/'
git grep -la '__attribute__ ((__packed__))'|xargs perl -pi -e 's/__attribute__ \(\(__packed__\)\)/QEMU_PACKED/'
git grep -la '__attribute((packed))'|xargs perl -pi -e 's/__attribute\(\(packed\)\)/QEMU_PACKED/'
Whitespace in linux-user/syscall_defs.h was fixed manually
to avoid warnings from scripts/checkpatch.pl.
Manual changes were also applied to hw/pc.c.
I did not fix indentation with tabs in block/vvfat.c.
The patch will show 4 errors with scripts/checkpatch.pl.
Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
-mms-bitfields prevents that the bitfields in current IP header structs
are packed into a single byte as it is required. Fix this by using
uint8_t as backing type.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
The expiration timeout must only affect packets that are queued due to
pending ARP resolutions. The old version broke ping e.g.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
No need to update the current time for each packet we send from the
queue. Processing time is comparably short.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Should be uint32_t for IPv4, not int. Also avoid in_addr_t without
proper includes. Fixes build regression on mingw32.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
In the current implementation, if Slirp tries to send an IP packet to a client
with an unknown hardware address, the packet is simply dropped and an ARP
request is sent (if_encap in slirp/slirp.c).
With this patch, Slirp will send the ARP request, re-queue the packet and try
to send it later. The packet is dropped after one second if the ARP reply is
not received.
Signed-off-by: Fabien Chouteau <chouteau@adacore.com>
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
This patch adds a simple ARP table in Slirp and also adds handling of
gratuitous ARP requests.
Signed-off-by: Fabien Chouteau <chouteau@adacore.com>
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
cppcheck detected two rather strange comments which were not
correctly written as C comments.
They did not cause any harm because they were framed by
#ifdef notdef ... #endif, so they were never compiled.
Fix them nevertheless (we could also remove the unused code).
Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
