Async QMP always raises a "ConnectError" on any connection error which
houses the cause in a second exception. We can check if this root cause
was python's ConnectionError to determine a fairly similar condition to
the original error check here.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Beraldo Leal <bleal@redhat.com>
Cleanup related to commit ccd3b3b811, "qemu-option: warn for
short-form boolean options".
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
This is in preparation for renaming qemu.aqmp to qemu.qmp. I should have
done this from this from the very beginning, but it's a convenient time
to make sure this churn is taken care of.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
It's a commonly needed definition, it can be re-exported by the root.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Beraldo Leal <bleal@redhat.com>
Copy the remaining type definitions from QMP into the qemu.aqmp.legacy
module. Now, users that require the legacy interface don't need to
import anything else but qemu.aqmp.legacy wrapper.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Beraldo Leal <bleal@redhat.com>
This exception can be injected into any await statement. If we are
canceled via timeout, we want to clear the pending execution record on
our way out.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Beraldo Leal <bleal@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
asyncio can complain *very* loudly if you forget to back out of things
gracefully before the garbage collector starts destroying objects that
contain live references to asyncio Tasks.
The usual fix is just to remember to call aqmp.disconnect(), but for the
sake of the legacy wrapper and quick, one-off scripts where a graceful
shutdown is not necessarily of paramount imporance, add a courtesy
cleanup that will trigger prior to seeing screenfuls of confusing
asyncio tracebacks.
Note that we can't *always* save you from yourself; depending on when
the GC runs, you might just seriously be out of luck. The best we can do
in this case is to gently remind you to clean up after yourself.
(Still much better than multiple pages of incomprehensible python
warnings for the crime of forgetting to put your toys away.)
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Beraldo Leal <bleal@redhat.com>
The old legacy runner no longer seems to work with output logging, so we
can't see failure logs when a test case fails. The new runner doesn't
(seem to) support Coverage.py yet, but seeing error output is a more
important feature.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Beraldo Leal <bleal@redhat.com>
Message-id: 20220119193916.4138217-3-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
setuptools is a package that replaces the python stdlib 'distutils'. It
is generally installed by all venv-creating tools "by default". It isn't
actually needed at runtime for the qemu package, so our own setup.cfg
does not mention it as a dependency.
However, tox will create virtual environments that include it, and will
upgrade it to the very latest version. the 'venv' tool will also include
whichever version your host system happens to have.
Unfortunately, setuptools version 60.0.0 and above include a hack to
forcibly overwrite python's built-in distutils. The pylint tool that we
use to run code analysis checks on this package relies on distutils and
suffers regressions when setuptools >= 60.0.0 is present at all, see
https://github.com/PyCQA/pylint/issues/5704
Instruct tox and the 'check-dev' targets to avoid setuptools packages
that are too new, for now. Pipenv is unaffected, because setuptools 60
does not offer Python 3.6 support, and our pipenv config is pinned
against Python 3.6.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Beraldo Leal <bleal@redhat.com>
Reviewed-by: Cleber Rosa <crosa@redhat.com>
Tested-by: Cleber Rosa <crosa@redhat.com>
Message-id: 20220121005221.142236-1-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
Mypy 0.930, released Dec 22, changes the way argparse objects are
considered. Crafting a definition that works under Python 3.6 and an
older mypy alongside newer versions simultaneously is ... difficult,
so... eh. Stub it out with an 'Any' definition to get the CI moving
again.
Oh well.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Beraldo Leal <bleal@redhat.com>
Message-id: 20220110191349.1841027-4-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
0.920 (Released 2021-12-15) is not entirely happy with the
way that I was defining _FutureT:
qemu/aqmp/protocol.py:601: error: Item "object" of the upper bound
"Optional[Future[Any]]" of type variable "_FutureT" has no attribute
"done"
Update it with something a little mechanically simpler that works better
across a wider array of mypy versions.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-id: 20220110191349.1841027-3-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
pylint's dependency astroid appears to have bugs in 2.9.1 and 2.9.2 (Dec
31 and Jan 3) that appear to erroneously expect the qemu namespace to
have an __init__.py file. astroid 2.9.3 (Jan 9) avoids that problem, but
appears to not understand a relative import within a namespace package.
Update the relative import - it was worth changing anyway, because these
packages will eventually be packaged and distributed separately.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Beraldo Leal <bleal@redhat.com>
Message-id: 20220110191349.1841027-2-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
3.6 doesn't play keepaway with the socket object, so we don't need to go
fishing for it on this version. In fact, so long as 'sendmsg' is still
available, it's probably preferable to just use that method and only go
fishing for forbidden details when we absolutely have to.
Reported-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Willian Rampazzo <willianr@redhat.com>
Message-id: 20211118204620.1897674-8-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
In the case that the QEMU process actually launches -- but then dies so
quickly that we can't establish a QMP connection to it -- QEMUMachine
currently calls _post_shutdown() assuming that it never launched the VM
process.
This isn't true, though: it "merely" may have failed to establish a QMP
connection and the process is in the middle of its own exit path.
If we don't wait for the subprocess, the caller may get a bogus `None`
return for .exitcode(). This behavior was observed from
device-crash-test; after the switch to Async QMP, the timings were
changed such that it was now seemingly possible to witness the failure
of "vm.launch()" *prior* to the exitcode becoming available.
The semantic of the `_launched` property is changed in this
patch. Instead of representing the condition "launch() executed
successfully", it will now represent "has forked a child process
successfully". This way, wait() when called in the exit path won't
become a no-op.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Willian Rampazzo <willianr@redhat.com>
Message-id: 20211118204620.1897674-6-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
No need to clear them only to set them later.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Willian Rampazzo <willianr@redhat.com>
Message-id: 20211118204620.1897674-5-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
If you create two instances of QEMUMachine(), they'll both create the
same nickname by default -- which is not that helpful.
Luckily, they'll both create unique temporary directories ... but due to
user configuration, they may share logging and sockfile directories,
meaning two instances can collide. The Python logging will also be quite
confusing, with no differentiation between the two instances.
Add an instance disambiguator (The memory address of the instance) to
the default nickname to foolproof this in all cases.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Willian Rampazzo <willianr@redhat.com>
Message-id: 20211118204620.1897674-4-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
It doesn't matter if it was the user or the class itself that specified
where the sockfile should be created; the fact is that if we are using a
sockfile here, we created it and we can clean it up.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Willian Rampazzo <willianr@redhat.com>
Message-id: 20211118204620.1897674-3-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
Analogous to temp_dir and log_dir, add a sock_dir property that defaults
to @temp_dir -- instead of base_temp_dir -- when the user hasn't
overridden the sock dir value in the initializer.
This gives us a much more unique directory to put sockfiles in by default.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Willian Rampazzo <willianr@redhat.com>
Message-id: 20211118204620.1897674-2-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
When ConnectError is used to wrap an Exception that was initialized
without an error message, we are treated to a traceback with a rubbish
line like this:
... ConnectError: Failed to establish session:
Correct this to use the name of an exception as a fallback message:
... ConnectError: Failed to establish session: EOFError
Better!
Signed-off-by: John Snow <jsnow@redhat.com>
Reported-by: Thomas Huth <thuth@redhat.com>
Tested-by: Thomas Huth <thuth@redhat.com>
Message-id: 20211111143719.2162525-3-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
If we receive ConnectionResetError (ECONNRESET) while attempting to
perform capabilities negotiation -- prior to the establishment of the
async reader/writer tasks -- the disconnect function is not aware that
we are in an error pathway.
As a result, when attempting to close the StreamWriter, we'll see the
same ConnectionResetError that caused us to initiate a disconnect in the
first place, which will cause the disconnect task itself to fail, which
emits a CRITICAL logging event.
I still don't know if there's a smarter way to check to see if an
exception received at this point is "the same" exception as the one that
caused the initial disconnect, but for now the problem can be avoided by
improving the error pathway detection in the exit path.
Reported-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: John Snow <jsnow@redhat.com>
Tested-by: Thomas Huth <thuth@redhat.com>
Message-id: 20211111143719.2162525-2-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
In the discussion about renaming the `tests/acceptance` [1], the
conclusion was that the folders inside `tests` are related to the
framework running the tests and not directly related to the type of
the tests.
This changes the folder to `tests/avocado` and adjusts the MAKEFILE, the
CI related files and the documentation.
[1] https://lists.gnu.org/archive/html/qemu-devel/2021-05/msg06553.html
Reviewed-by: Niek Linnenbank <nieklinnenbank@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Willian Rampazzo <willianr@redhat.com>
Message-Id: <20211105155354.154864-3-willianr@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Swap out the synchronous QEMUMonitorProtocol from qemu.qmp with the sync
wrapper from qemu.aqmp instead.
Add an escape hatch in the form of the environment variable
QEMU_PYTHON_LEGACY_QMP which allows you to cajole QEMUMachine into using
the old implementation, proving that both implementations work
concurrently.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Message-id: 20211026175612.4127598-9-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
This is a wrapper around the async QMPClient that mimics the old,
synchronous QEMUMonitorProtocol class. It is designed to be
interchangeable with the old implementation.
It does not, however, attempt to mimic Exception compatibility.
Signed-off-by: John Snow <jsnow@redhat.com>
Acked-by: Hanna Reitz <hreitz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Message-id: 20211026175612.4127598-8-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
The scary message interferes with the iotests output. Coincidentally, if
iotests works by removing this, then it's good evidence that we don't
really need to scare people away from using it.
Signed-off-by: John Snow <jsnow@redhat.com>
Acked-by: Hanna Reitz <hreitz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Message-id: 20211026175612.4127598-4-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
To use the AQMP backend, Machine just needs to be a little more diligent
about what happens when closing a QMP connection. The operation is no
longer a freebie in the async world; it may return errors encountered in
the async bottom half on incoming message receipt, etc.
(AQMP's disconnect, ultimately, serves as the quiescence point where all
async contexts are gathered together, and any final errors reported at
that point.)
Because async QMP continues to check for messages asynchronously, it's
almost certainly likely that the loop will have exited due to EOF after
issuing the last 'quit' command. That error will ultimately be bubbled
up when attempting to close the QMP connection. The manager class here
then is free to discard it -- if it was expected.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-id: 20211026175612.4127598-3-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
If we spy on the QMP commands instead, we don't need callers to remember
to pass it. Seems like a fair trade-off.
The one slightly weird bit is overloading this instance variable for
wait(), where we use it to mean "don't issue the qmp 'quit'
command". This means that wait() will "fail" if the QEMU process does
not terminate of its own accord.
In most cases, we probably did already actually issue quit -- some
iotests do this -- but in some others, we may be waiting for QEMU to
terminate for some other reason, such as a test wherein we tell the
guest (directly) to shut down.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-id: 20211026175612.4127598-2-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
Run mypy and pylint on the iotests files directly from the Python CI
test infrastructure. This ensures that any accidental breakages to the
qemu.[qmp|aqmp|machine|utils] packages will be caught by that test
suite.
It also ensures that these linters are run with well-known versions and
test against a wide variety of python versions, which helps to find
accidental cross-version python compatibility issues.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Message-id: 20211019144918.3159078-15-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
It's not used anymore, now.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 20210923004938.3999963-11-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
It turns out you can do this directly from Python ... and because of
this, you don't need to worry about setting the inheritability of the
fds or spawning another process.
Doing this is helpful because it allows QEMUMonitorProtocol to keep its
file descriptor and socket object as private implementation
details. /that/ is helpful in turn because it allows me to write a
compatible, alternative implementation.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 20210923004938.3999963-10-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
All callers in the tree *already* clear the events after a call to
get_events(). Do it automatically instead and update callsites to remove
the manual clear call.
These semantics are quite a bit easier to emulate with async QMP, and
nobody appears to be abusing some emergent properties of what happens if
you decide not to clear them, so let's dial down to the dumber, simpler
thing.
Specifically: callers of clear() right after a call to get_events() are
more likely expressing their desire to not see any events they just
retrieved, whereas callers of clear_events() not in relation to a recent
call to pull_event/get_events are likely expressing their desire to
simply drop *all* pending events straight onto the floor. In the sync
world, this is safe enough; in the async world it's nearly impossible to
promise that nothing happens between getting and clearing the
events.
Making the retrieval also clear the queue is vastly simpler.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 20210923004938.3999963-9-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
AQMP is a library, and ideally it should not print error diagnostics
unless a user opts into seeing them. By default, Python will print all
WARNING, ERROR or CRITICAL messages to screen if no logging
configuration has been created by a client application.
In AQMP's case, ERROR logging statements are used to report additional
detail about runtime failures that will also eventually be reported to the
client library via an Exception, so these messages should not be
rendered by default.
(Why bother to have them at all, then? In async contexts, there may be
multiple Exceptions and we are only able to report one of them back to
the client application. It is not reasonably easy to predict ahead of
time if one or more of these Exceptions will be squelched. Therefore,
it's useful to log intermediate failures to help make sense of the
ultimate, resulting failure.)
Add a NullHandler that will suppress these messages until a client
application opts into logging via logging.basicConfig or similar. Note
that upon calling basicConfig(), this handler will *not* suppress these
messages from being displayed by the client's configuration.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 20210923004938.3999963-8-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
When we encounter an EOFError, we don't know if it's an "error" in the
perspective of the user of the library yet. Therefore, we should not log
it as an error. Reduce the severity of this logging message to "INFO" to
indicate that it's something that we expect to occur during the normal
operation of the library.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 20210923004938.3999963-7-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
The iotests interface expects to return the greeting as a dict; AQMP
offers it as a rich object.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 20210923004938.3999963-6-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
Add an implementation for send_fd_scm to the async QMP implementation.
Like socket_scm_helper mentions, a non-empty payload is required for
QEMU to process the ancillary data. A space is most useful because it
does not disturb the parsing of subsequent JSON objects.
A note on "voiding the warranty":
Python 3.11 removes support for calling sendmsg directly from a
transport's socket. There is no other interface for doing this, our use
case is, I suspect, "quite unique".
As far as I can tell, this is safe to do -- send_fd_scm is a synchronous
function and we can be guaranteed that the async coroutines will *not* be
running when it is invoked. In testing, it works correctly.
I investigated quite thoroughly the possibility of creating my own
asyncio Transport (The class that ultimately manages the raw socket
object) so that I could manage the socket myself, but this is so wildly
invasive and unportable I scrapped the idea. It would involve a lot of
copy-pasting of various python utilities and classes just to re-create
the same infrastructure, and for extremely little benefit. Nah.
Just boldly void the warranty instead, while I try to follow up on
https://bugs.python.org/issue43232
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 20210923004938.3999963-5-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
This serves two purposes:
(1) It is now possible to discern whether or not clear() removed any
event(s) from the queue with absolute certainty, and
(2) It is now very easy to get a List of all pending events in one
chunk, which is useful for the sync bridge.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 20210923004938.3999963-4-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
Synchronous clients may want to know if they're about to block waiting
for an event or not. A method such as this is necessary to implement a
compatible interface for the old QEMUMonitorProtocol using the new async
internals.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 20210923004938.3999963-3-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
Expose the greeting as a read-only property of QMPClient so it can be
retrieved at-will.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 20210923004938.3999963-2-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
Add syntax highlighting for the incoming and outgoing QMP messages.
This is achieved using the pygments module which was added in a
previous commit.
The current implementation is a really simple one which doesn't
allow for any configuration. In future this has to be improved
to allow for easier theme config using an external config of
some sort.
Signed-off-by: G S Niteesh Babu <niteesh.gs@gmail.com>
Message-Id: <20210823220746.28295-6-niteesh.gs@gmail.com>
Signed-off-by: John Snow <jsnow@redhat.com>
Added pygments as optional dependency for AQMP TUI.
This is required for the upcoming syntax highlighting feature
in AQMP TUI.
The dependency has also been added in the devel optional group.
Added mypy 'ignore_missing_imports' for pygments since it does
not have any type stubs.
Signed-off-by: G S Niteesh Babu <niteesh.gs@gmail.com>
Message-Id: <20210823220746.28295-5-niteesh.gs@gmail.com>
Signed-off-by: John Snow <jsnow@redhat.com>
Add an entry point for aqmp-tui. This will allow it to be run from
the command line using "aqmp-tui localhost:1234"
More options available in the TUI can be found using "aqmp-tui -h"
Signed-off-by: G S Niteesh Babu <niteesh.gs@gmail.com>
Message-Id: <20210823220746.28295-4-niteesh.gs@gmail.com>
Signed-off-by: John Snow <jsnow@redhat.com>
Added AQMP TUI.
Implements the follwing basic features:
1) Command transmission/reception.
2) Shows events asynchronously.
3) Shows server status in the bottom status bar.
4) Automatic retries on disconnects and error conditions.
Also added type annotations and necessary pylint/mypy configurations.
Signed-off-by: G S Niteesh Babu <niteesh.gs@gmail.com>
Message-Id: <20210823220746.28295-3-niteesh.gs@gmail.com>
Signed-off-by: John Snow <jsnow@redhat.com>
Added dependencies for the upcoming AQMP TUI under the optional
'tui' group.
The same dependencies have also been added under the devel group
since no work around has been found for optional groups to imply
other optional groups.
Signed-off-by: G S Niteesh Babu <niteesh.gs@gmail.com>
Message-Id: <20210823220746.28295-2-niteesh.gs@gmail.com>
Signed-off-by: John Snow <jsnow@redhat.com>
I'm not exposing this via the Makefile help, it's not likely to be
useful to passersby. Switch the avocado runner to the 'legacy' runner
for now, as the new runner seems to obscure coverage reports, again.
Usage is to enter your venv of choice and then:
`make check-coverage && xdg-open htmlcov/index.html`.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-id: 20210915162955.333025-28-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
Tests a real connect, a real accept, and really sending and receiving a
message over a UNIX socket.
Brings coverage of protocol.py up to ~93%.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-id: 20210915162955.333025-27-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
This tests most of protocol.py -- From a hacked up Coverage.py run, it's
at about 86%. There's a few error cases that aren't very well tested
yet, they're hard to induce artificially so far. I'm working on it.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-id: 20210915162955.333025-26-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
Avocado v90 includes improved support for running async unit tests. The
workaround that existed prior to v90 causes the unit tests to fail
afterwards, however, so upgrade our minimum version pin to the very
latest and greatest.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-id: 20210915162955.333025-25-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
Add a warning whenever AQMP is used to steer people gently away from
using it for the time-being.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-id: 20210915162955.333025-24-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
As a convenience. It isn't used by the library itself, but it is used by
the test suite. It will also come in handy for users of the library
still on Python 3.6.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-id: 20210915162955.333025-23-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
