Commit Graph

32 Commits

Author SHA1 Message Date
Richard Henderson d6d1fd2973 accel/tcg: Rename tb_invalidate_phys_page_range and drop end parameter
This function is is never called with a real range,
only for a single page.  Drop the second parameter
and rename to tb_invalidate_phys_page.

Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2022-10-26 11:11:28 +10:00
Alex Bennée 6fbdff8706 cpu: cache CPUClass in CPUState for hot code paths
The class cast checkers are quite expensive and always on (unlike the
dynamic case who's checks are gated by CONFIG_QOM_CAST_DEBUG). To
avoid the overhead of repeatedly checking something which should never
change we cache the CPUClass reference for use in the hot code paths.

Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220811151413.3350684-3-alex.bennee@linaro.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20220923084803.498337-3-clg@kaod.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2022-10-03 20:53:30 -07:00
Richard Henderson ec0d1849d9 util/log: Remove qemu_log_close
The only real use is in cpu_abort, where we have just
flushed the file via qemu_log_unlock, and are just about
to force-crash the application via abort.  We do not
really need to close the FILE before the abort.

The two uses in test-logging.c can be handled with
qemu_set_log_filename_flags.

Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220417183019.755276-32-richard.henderson@linaro.org>
2022-04-20 10:51:11 -07:00
Richard Henderson 90f37362d7 util/log: Remove qemu_log_flush
All uses flush output immediately before or after qemu_log_unlock.
Instead of a separate call, move the flush into qemu_log_unlock.

Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220417183019.755276-20-richard.henderson@linaro.org>
2022-04-20 10:51:11 -07:00
Richard Henderson 78b548583e *: Use fprintf between qemu_log_trylock/unlock
Inside qemu_log, we perform qemu_log_trylock/unlock, which need
not be done if we have already performed the lock beforehand.

Always check the result of qemu_log_trylock -- only checking
qemu_loglevel_mask races with the acquisition of the lock on
the logfile.

Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220417183019.755276-10-richard.henderson@linaro.org>
2022-04-20 10:51:11 -07:00
Richard Henderson c60f599bcb util/log: Rename qemu_log_lock to qemu_log_trylock
This function can fail, which makes it more like ftrylockfile
or pthread_mutex_trylock than flockfile or pthread_mutex_lock,
so rename it.

To closer match the other trylock functions, release rcu_read_lock
along the failure path, so that qemu_log_unlock need not be called
on failure.

Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220417183019.755276-8-richard.henderson@linaro.org>
2022-04-20 10:51:11 -07:00
Marc-André Lureau 0f9668e0c1 Remove qemu-common.h include from most units
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20220323155743.1585078-33-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-04-06 14:31:55 +02:00
Marc-André Lureau 8e3b0cbb72 Replace qemu_real_host_page variables with inlined functions
Replace the global variables with inlined helper functions. getpagesize() is very
likely annotated with a "const" function attribute (at least with glibc), and thus
optimization should apply even better.

This avoids the need for a constructor initialization too.

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20220323155743.1585078-12-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-04-06 10:50:38 +02:00
Marc-André Lureau ee3eb3a7ce Replace TARGET_WORDS_BIGENDIAN
Convert the TARGET_WORDS_BIGENDIAN macro, similarly to what was done
with HOST_BIG_ENDIAN. The new TARGET_BIG_ENDIAN macro is either 0 or 1,
and thus should always be defined to prevent misuse.

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Suggested-by: Halil Pasic <pasic@linux.ibm.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220323155743.1585078-8-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-04-06 10:50:37 +02:00
Philippe Mathieu-Daudé 377bf6f37d softmmu: List CPU types again
Commit e0220bb5b2 made cpus.c target-agnostic but didn't notice
the cpu_list() function is only defined in target-specific code
in "cpu.h". Move list_cpus() declaration to "exec/cpu-common.h"
because this function is not softmmu-specific and can also be
used by user-mode, along with moving its implementation to cpu.c,
which is compiled per target.

Fixes: e0220bb5b2 ("softmmu: Build target-agnostic objects once")
Reported-by: Max Filippov <jcmvbkbc@gmail.com>
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220314140108.26222-1-philippe.mathieu.daude@gmail.com>
Tested-by: Max Filippov <jcmvbkbc@gmail.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
2022-03-16 08:43:10 +01:00
Philippe Mathieu-Daudé 3b04508cce cpu: Add missing 'exec/exec-all.h' and 'qemu/accel.h' headers
cpu.c requires "exec/exec-all.h" to call tlb_flush() and
"qemu/accel.h" to call accel_cpu_realizefn().

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220214183144.27402-6-f4bug@amsat.org>
2022-03-06 13:15:42 +01:00
Philippe Mathieu-Daudé 73842ef04a exec: Make cpu_memory_rw_debug() target agnostic
cpu_memory_rw_debug() is declared in "exec/cpu-all.h" which
contains target-specific declarations. To be able to use it
from target agnostic source, move the declaration to the
generic "exec/cpu-common.h" header.

Replace the target-specific 'target_ulong' type by 'vaddr'
which better reflects the argument type, and is target agnostic.

Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220207075426.81934-5-f4bug@amsat.org>
2022-03-06 13:15:42 +01:00
Peter Maydell 0c3c25fcda cpu.c: Make start-powered-off settable after realize
The CPU object's start-powered-off property is currently only
settable before the CPU object is realized.  For arm machines this is
awkward, because we would like to decide whether the CPU should be
powered-off based on how we are booting the guest code, which is
something done in the machine model code and in common code called by
the machine model, which runs much later and in completely different
parts of the codebase from the SoC object code that is responsible
for creating and realizing the CPU objects.

Allow start-powered-off to be set after realize.  Since this isn't
something that's supported by the DEFINE_PROP_* macros, we have to
switch the property definition to use the
object_class_property_add_bool() function.

Note that it doesn't conceptually make sense to change the setting of
the property after the machine has been completely initialized,
beacuse this would mean that the behaviour of the machine when first
started would differ from its behaviour when the system is
subsequently reset.  (It would also require the underlying state to
be migrated, which we don't do.)

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Tested-by: Cédric Le Goater <clg@kaod.org>
Message-id: 20220127154639.2090164-3-peter.maydell@linaro.org
2022-02-08 10:56:27 +00:00
Richard Henderson 6e8dcacd08 linux-user: Add code for PR_GET/SET_UNALIGN
This requires extra work for each target, but adds the
common syscall code, and the necessary flag in CPUState.

Reviewed-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20211227150127.2659293-4-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2022-01-06 11:40:52 +01:00
Paolo Bonzini ad5439bb53 cpu: remove unnecessary #ifdef CONFIG_TCG
"if (tcg_enabled())" allows elision of the code inside it; we only need
the prototype to exist, so that the code compile even for the --disable-tcg
case.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-12-18 10:57:36 +01:00
Richard Henderson 995b87dedc Revert "cpu: Move cpu_common_props to hw/core/cpu.c"
This reverts commit 1b36e4f5a5.

Despite a comment saying why cpu_common_props cannot be placed in
a file that is compiled once, it was moved anyway.  Revert that.

Since then, Property is not defined in hw/core/cpu.h, so it is now
easier to declare a function to install the properties rather than
the Property array itself.

Cc: Eduardo Habkost <ehabkost@redhat.com>
Suggested-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2021-10-15 16:39:15 -07:00
Richard Henderson c2ffd7549b accel/tcg: Record singlestep_enabled in tb->cflags
Set CF_SINGLE_STEP when single-stepping is enabled.
This avoids the need to flush all tb's when turning
single-stepping on or off.

Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2021-07-21 07:47:05 -10:00
Richard Henderson 10c37828b2 accel/tcg: Move breakpoint recognition outside translation
Trigger breakpoints before beginning translation of a TB
that would begin with a BP.  Thus we never generate code
for the BP at all.

Single-step instructions within a page containing a BP so
that we are sure to check each insn for the BP as above.

We no longer need to flush any TBs when changing BPs.

Resolves: https://gitlab.com/qemu-project/qemu/-/issues/286
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/404
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/489
Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2021-07-21 07:47:05 -10:00
Richard Henderson 5bc31e9440 hw/core: Introduce CPUClass.gdb_adjust_breakpoint
This will allow a breakpoint hack to move out of AVR's translator.

Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2021-07-21 07:47:05 -10:00
Richard Henderson ad1a706f38 cpu: Add breakpoint tracepoints
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2021-07-09 21:31:11 -07:00
Philippe Mathieu-Daudé feece4d070 cpu: Move CPUClass::vmsd to SysemuCPUOps
Migration is specific to system emulation.

- Move the CPUClass::vmsd field to SysemuCPUOps,
- restrict VMSTATE_CPU() macro to sysemu,
- vmstate_dummy is now unused, remove it.

Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210517105140.1062037-16-f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2021-05-26 15:33:59 -07:00
Philippe Mathieu-Daudé 8b80bd28a5 cpu: Introduce SysemuCPUOps structure
Introduce a structure to hold handler specific to sysemu.

Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210517105140.1062037-15-f4bug@amsat.org>
[rth: Squash "restrict hw/core/sysemu-cpu-ops.h" patch]
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2021-05-26 15:33:59 -07:00
Philippe Mathieu-Daudé 744c72a837 cpu: Rename CPUClass vmsd -> legacy_vmsd
Quoting Peter Maydell [*]:

  There are two ways to handle migration for
  a CPU object:

  (1) like any other device, so it has a dc->vmsd that covers
  migration for the whole object. As usual for objects that are a
  subclass of a parent that has state, the first entry in the
  VMStateDescription field list is VMSTATE_CPU(), which migrates
  the cpu_common fields, followed by whatever the CPU's own migration
  fields are.

  (2) a backwards-compatible mechanism for CPUs that were
  originally migrated using manual "write fields to the migration
  stream structures". The on-the-wire migration format
  for those is based on the 'env' pointer (which isn't a QOM object),
  and the cpu_common part of the migration data is elsewhere.

  cpu_exec_realizefn() handles both possibilities:

  * for type 1, dc->vmsd is set and cc->vmsd is not,
    so cpu_exec_realizefn() does nothing, and the standard
    "register dc->vmsd for a device" code does everything needed

  * for type 2, dc->vmsd is NULL and so we register the
    vmstate_cpu_common directly to handle the cpu-common fields,
    and the cc->vmsd to handle the per-CPU stuff

  You can't change a CPU from one type to the other without breaking
  migration compatibility, which is why some guest architectures
  are stuck on the cc->vmsd form. New targets should use dc->vmsd.

To avoid new targets to start using type (2), rename cc->vmsd as
cc->legacy_vmsd. The correct field to implement is dc->vmsd (the
DeviceClass one).

See also commit b170fce3dd ("cpu: Register VMStateDescription
through CPUState") for historic background.

[*] https://www.mail-archive.com/qemu-devel@nongnu.org/msg800849.html

Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Cc: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20210517105140.1062037-13-f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2021-05-26 15:33:59 -07:00
Philippe Mathieu-Daudé 4336073b9b cpu: Assert DeviceClass::vmsd is NULL on user emulation
Migration is specific to system emulation.

Restrict current DeviceClass::vmsd to sysemu using #ifdef'ry,
and assert in cpu_exec_realizefn() that dc->vmsd not set under
user emulation.

Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210517105140.1062037-12-f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2021-05-26 15:33:59 -07:00
Claudio Fontana 9ea057dc64 accel-cpu: make cpu_realizefn return a bool
overall, all devices' realize functions take an Error **errp, but return void.

hw/core/qdev.c code, which realizes devices, therefore does:

local_err = NULL;
dc->realize(dev, &local_err);
if (local_err != NULL) {
    goto fail;
}

However, we can improve at least accel_cpu to return a meaningful bool value.

Signed-off-by: Claudio Fontana <cfontana@suse.de>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210322132800.7470-9-cfontana@suse.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-05-10 15:41:50 -04:00
Claudio Fontana bb883fd677 accel: introduce new accessor functions
avoid open coding the accesses to cpu->accel_cpu interfaces,
and instead introduce:

accel_cpu_instance_init,
accel_cpu_realizefn

to be used by the targets/ initfn code,
and by cpu_exec_realizefn respectively.

Signed-off-by: Claudio Fontana <cfontana@suse.de>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210322132800.7470-7-cfontana@suse.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-05-10 15:41:50 -04:00
Claudio Fontana 30565f10e9 cpu: call AccelCPUClass::cpu_realizefn in cpu_exec_realizefn
move the call to accel_cpu->cpu_realizefn to the general
cpu_exec_realizefn from target/i386, so it does not need to be
called for every target explicitly as we enable more targets.

Signed-off-by: Claudio Fontana <cfontana@suse.de>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210322132800.7470-6-cfontana@suse.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-05-10 15:41:50 -04:00
Claudio Fontana 7df5e3d6ad accel/tcg: split TCG-only code from cpu_exec_realizefn
move away TCG-only code, make it compile only on TCG.

Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
[claudio: moved the prototypes from hw/core/cpu.h to exec/cpu-all.h]
Signed-off-by: Claudio Fontana <cfontana@suse.de>
Message-Id: <20210204163931.7358-4-cfontana@suse.de>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2021-02-05 10:24:14 -10:00
Eduardo Habkost e9e51b7154 cpu: Introduce TCGCpuOperations struct
The TCG-specific CPU methods will be moved to a separate struct,
to make it easier to move accel-specific code outside generic CPU
code in the future.  Start by moving tcg_initialize().

The new CPUClass.tcg_opts field may eventually become a pointer,
but keep it an embedded struct for now, to make code conversion
easier.

Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
[claudio: move TCGCpuOperations inside include/hw/core/cpu.h]
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20210204163931.7358-2-cfontana@suse.de>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2021-02-05 10:24:14 -10:00
Paolo Bonzini 3b9bd3f46b remove TCG includes from common code
Enable removing tcg/$tcg_arch from the include path when TCG is disabled.
Move translate-all.h to include/exec, since stubs exist for the functions
defined therein.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-01-02 21:03:36 +01:00
Eduardo Habkost 1b36e4f5a5 cpu: Move cpu_common_props to hw/core/cpu.c
There's no reason to keep the property list separate from the CPU
class code.  Move the variable to hw/core/cpu.c and make it
static.

Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20201211220529.2290218-3-ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2020-12-15 10:02:07 -05:00
Paolo Bonzini d9f24bf572 exec: split out non-softmmu-specific parts
Over the years, most parts of exec.c that were not specific to softmmu
have been moved to accel/tcg; what's left is mostly the low-level part
of the memory API, which includes RAMBlock and AddressSpaceDispatch.
However exec.c also hosts 4-500 lines of code for the target specific
parts of the CPU QOM object, plus a few functions for user-mode
emulation that do not have a better place (they are not TCG-specific so
accel/tcg/user-exec.c is not a good place either).

Move these parts to a new file, so that exec.c can be moved to
softmmu/physmem.c.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-10-12 11:50:22 -04:00