-fsanitize=undefined is not the same thing as --enable-sanitizers. After
commit 47c823e ("tests/docker: add sanitizers back to clang build", 2019-09-11)
test-clang is almost duplicating the asan (test-debug) test, so
partly revert commit 47c823e5b while leaving ubsan enabled.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
There are just too many leaks in device-introspect-test (especially for
the plethora of arm and aarch64 boards) to make LeakSanitizer useful;
disable it for now.
Whoever is interested in debugging leaks can also use valgrind like this:
QTEST_QEMU_BINARY=aarch64-softmmu/qemu-system-aarch64 \
QTEST_QEMU_IMG=qemu-img \
valgrind --trace-children=yes --leak-check=full \
tests/device-introspect-test -p /aarch64/device/introspect/concrete/defaults/none
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Despite our attempts in 4d26c7fef4 to keep this going it still gets in
the way of "make docker-test-build" completing because of course we
can't build a modern QEMU with the image. Let's put the thing out of
its misery and remove it.
People who really care about building on powerpc can still use the
binfmt_misc support to manually build an image (or just run the build
from pre this commit).
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Cc: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
As part of the push to drop python2 support, replace any explicit python2
dependencies with python3 versions.
For centos, python2 still exists as an implicit dependency, but by adding
python3 we will be able to build even if the configure script begins to
require python 3.5+.
Tested with centos7, fedora, ubuntu, ubuntu1804, and debian 9 (amd64).
Tested under a custom configure script that requires Python 3.5+.
the travis dockerfile is also moved to using python3, which was tested
by running `make docker-test-build@travis`, which I hope is sufficient.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-Id: <20190923181140.7235-7-jsnow@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Cleber Rosa <crosa@redhat.com>
Tested-by: Cleber Rosa <crosa@redhat.com>
debian-sid is listed as a partial image, so we cannot run tests against it.
Since it isn't used by any other testable image, remove it for now as it
is prone to bitrot.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-Id: <20190923181140.7235-6-jsnow@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Acked-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
debian-ports is listed as a partial image, so we cannot run tests against it.
Since it isn't used by any other testable image, remove it for now as it
is prone to bitrot.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-Id: <20190923181140.7235-5-jsnow@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Acked-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
There isn't a debian.dockerfile anymore,
so perform some ghost-busting.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-Id: <20190923181140.7235-4-jsnow@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Acked-by: Philippe Mathieu-Daudé <philmd@redhat.com>
debian8 partial base is also not consumed by any image, so remove it.
For QEMU's development cycle, we only support debian9 (stretch) and
debian10 (buster).
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20190923181140.7235-3-jsnow@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
We don't have a debian8-mxe dockerfile anymore.
Fixes: 67bd36beda
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20190923181140.7235-2-jsnow@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Oops; there's no argv here.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-Id: <20190913193821.17756-1-jsnow@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Cleber Rosa <crosa@redhat.com>
Tested-by: Cleber Rosa <crosa@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Tested-by: Thomas Huth <thuth@redhat.com>
There was in the clean-up code caused by attempting to inspect images
which finished before we got there. Clean up the clean up code by:
- only track the one instance at a time
- use --filter for docker ps instead of doing it by hand
- just call docker rm -f to be done with it
- use uuid.uuid4() for a random uid
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
When it was based on debian8 which uses python-minimal, it needed this.
It no longer does.
Goodbye, python2.7.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-Id: <20190918222546.11696-1-jsnow@redhat.com>
[AJB: fixed up commit message]
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Finger trouble in a previous clean-up inadvertently set
DEBIAN_PARTIAL_IMAGES instead of DOCKER_PARTIAL_IMAGES. Also fix the
typo to debian-9-mxe.
Fixes: 44d5a8bf5d
Signed-off-by: John Snow <jsnow@redhat.com>
[AJB: merged fix from Message-Id: <20190917185537.25417-1-jsnow@redhat.com>]
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Cleber Rosa <crosa@redhat.com>
Fedora23 is but a distant twinkle. The sanitizer works again, and even
if not, we have --enable-sanitizers now.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-Id: <20190912014442.5757-1-jsnow@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Currently this stops the mega:
make docker-test-build
from working. Once the source is patched to deal with the case this
workaround can be removed.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
The Debian QEMU packages require a bunch of cross compilers for
building firmware which aren't available on all host architectures.
Using --arch-only skips this particular requirement and allows us to
install just the dependencies we need.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
On some images SHELL is pointing at a limited /bin/sh which doesn't
understand noprofile/norc. Given the run script is running bash just
invoke it directly.
This fixes:
$ make docker-test-build@IMAGE DEBUG=1
[...]
+ echo ' ./test-build'
./test-build
+ echo '* Hit Ctrl-D to continue, or type '\''exit 1'\'' to abort'
* Hit Ctrl-D to continue, or type 'exit 1' to abort
+ echo
+ /bin/sh --noprofile --norc
/bin/sh: 0: Illegal option --
Fixes: 2b0c4fa13f
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Another image that can't be used directly to build QEMU.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
This should have been marked when the docker recipe was added to
prevent it being used for cross compiling QEMU. Sort the
DEBIAN_PARTIAL_IMAGE list while we are at it.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Now Jessie has entered LTS the powerpc architecture has been dropped
so we can no longer build the image from scratch. However we can use
the snapshot archive to build the last working version.
This now only lives on an example of setting up a user-cross image as
at least on x86-64 we can use the Buster packaged cross compiler for
building test images.
Suggested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Cc: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
While we are not currently using it we might as well keep the image
for later usage. So:
- update to a more recent snapshot
- clean up verbiage in commentary
- remove duplicate shell from a merge failure
Suggested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Now Buster is released we can stop relying on the movable feast that
is Sid for our cross-compiler for building tests.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Now Buster is released we can stop relying on the movable feast that
is Sid for our cross-compiler for building tests.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Now Buster is released we can stop relying on the movable feast that
is Sid for our cross-compiler for building tests.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Now Buster is released we can stop relying on the movable feast that
is Sid for our cross-compiler for building tests.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Now Buster is released we can stop relying on the movable feast that
is Sid for our cross-compiler for building tests.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Now Buster is released we can stop relying on the movable feast that
is Sid for our cross-compiler for building tests.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Now Buster is released we can stop relying on the movable feast that
is Sid for our cross-compiler for building tests.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Now Buster is released we can stop relying on the movable feast that
is Sid for our cross-compiler for building tests.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Now Buster is released we can stop relying on the movable feast that
is Sid for our cross-compiler for building tests.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Now Buster is released we can unify our cross build images for both
QEMU and tests.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
We need to add additional packages to the base images to be able to
build QEMU so lets avoid building with it.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
You can assume the failures most people are interested in are the
cross-compile failures that are specific to the cross compile target.
Set DEF_TARGET_LIST based on what we use for shippable, the user can
always override by calling with TARGET_LIST set.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
We might as well not repeat ourselves. At the same time allow it to be
overridden which we will use later from docker targets.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
This was only added in Python 3.6 and not all the build hosts have
that recent a python3. However we still need to ensure everything is
returns as a unicode string so checks higher up the call chain don't
barf.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
fixup! tests/docker: handle missing encoding keyword for subprocess.check_output
Podman requires a little bit of additional magic to the uid mapping
which was already done for the normal RunCommand. We simplify the
logic by pushing it directly into the Docker::run method to avoid
instantiating an extra Docker() object and ensure the CC command
always runs as the current user.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
The workaround that attempts to accomplish the same result as --userns=keep-id
does not appear to work well with UIDs much above 1000 (like mine, which is
above 20000.)
Since we have official support for this "trick" now, use the supported method.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-Id: <20190904232451.26466-1-jsnow@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
The introduction of podman support inadvertently broke configure's
detect of the container support as the configure probe didn't specify
an engine type. To fix this in docker.py:
- only (re)set USE_ENGINE if --engine is specified
- enhance the output so docker is no longer just yes
In the configure script we can at least start cleaning up the
detecting and naming of variables. To avoid too much churn the
conversion of the various make DOCKER_foo variables has been left for
future clean-ups.
Fixes: 9459f75413
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: David Hildenbrand <david@redhat.com>
The recent podman changes (9459f75413) imported enum which is part
of the python3 standard library but only available as an external
library for python2. This causes problems on the fairly restricted
environment such as shippable. Lets bite the bullet and make the
script a fully python3 one. To that end:
- drop the from __future__ import (we are there now ;-)
- avoid the StringIO import hack
- be consistent with the mode we read/write dockerfiles
- s/iteritems/items/
- ensure check_output returns strings for processing
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Cc: Marc-André Lureau <marcandre.lureau@redhat.com>
Allow to specify the container engine to run with ENGINE variable.
By default, ENGINE=auto and will select either podman or docker.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Add a --engine option to select either docker, podman or auto.
Among other advantages, podman allows to run rootless & daemonless
containers, fortunately sharing compatible CLI with docker.
With current podman, we have to use a uidmap trick in order to be able
to rw-share the ccache directory with the container user.
With a user 1000, the default mapping is: 1000 (host) -> 0 (container).
So write access to /var/tmp/ccache ends will end with permission
denied error.
With "--uidmap 1000:0:1 --uidmap 0:1:1000", the mapping is:
1000 (host) -> 0 (container, 1st namespace) -> 1000 (container, 2nd namespace).
(the rest is mumbo jumbo to avoid holes in the range of UIDs)
A future podman version may have an option such as --userns-keep-uid.
Thanks to Debarshi Ray <rishi@redhat.com> for the help!
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Acked-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
(podman will need further tweaks)
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Since docker caches the different layers, updating the package
list does not invalidate the previous "apt-get update" layer,
and it is likely "apt-get install" hits an outdated repository.
See commit beac6a98f6 and
https://docs.docker.com/develop/develop-images/dockerfile_best-practices/#apt-get
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20190723141528.18023-1-philmd@redhat.com>
[AJB: manually applies and fixed up]
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
It's very confusing when things work in the debug shell because the
environment is different from what the test is running. Fix this by
ensuring we only have the inherited environment from the run shell.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
The NSIS installer generates an executable suitable to install
QEMU on Windows.
Suggested-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20190715174817.18981-9-philmd@redhat.com>
[AJB: also --enable-docs in configure step]
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
The 'makeinfo' is required to generate the documentation from
the 'html' Makefile rule (called by 'install-doc').
The NSIS installer uses these files.
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20190715174817.18981-6-philmd@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
This silents a bunch of warnings while compiling the Slirp objects:
$ make
[...]
CC slirp/src/tftp.o
Package glib-2.0 was not found in the pkg-config search path.
Perhaps you should add the directory containing `glib-2.0.pc'
to the PKG_CONFIG_PATH environment variable
No package 'glib-2.0' found
CC slirp/src/udp6.o
Package glib-2.0 was not found in the pkg-config search path.
Perhaps you should add the directory containing `glib-2.0.pc'
to the PKG_CONFIG_PATH environment variable
No package 'glib-2.0' found
[...]
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20190715174817.18981-5-philmd@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Paolo Bonzini
Alex Bennée
John Snow
Marc-André Lureau
Philippe Mathieu-Daudé