perror and fprintf can be removed because all clients can now consume
Errors properly. However, we'll need to change the non-blocking connect
handlers to take an Error, in order to improve error handling for
migration with the TCP protocol.
This is a minor degradation in error reporting for outgoing migration.
However, until 1.2 this case just failed without even attempting to
connect, so it is still an improvement as far as overall QoI is
concerned.
Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Among others, before:
$ qemu-system-x86_64 -chardev socket,port=12345,id=char
inet_connect: host and/or port not specified
chardev: opening backend "socket" failed
After:
$ x86_64-softmmu/qemu-system-x86_64 -chardev socket,port=12345,id=char
qemu-system-x86_64: -chardev socket,port=12345,id=char: host and/or port not specified
chardev: opening backend "socket" failed
perror and fprintf can be removed because all clients can now
consume Errors properly.
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Before:
$ qemu-system-x86_64 -vnc foo.bar:12345
getaddrinfo(foo.bar,18245): Name or service not known
Failed to start VNC server on `foo.bar:12345'
$ qemu-system-x86_64 -vnc localhost:12345,reverse=on
inet_connect_opts: connect(ipv4,yakj.usersys.redhat.com,127.0.0.1,12345): Connection refused
Failed to start VNC server on `localhost:12345,reverse=on'
After:
$ x86_64-softmmu/qemu-system-x86_64 -vnc foo.bar:12345
Failed to start VNC server on `foo.bar:12345': address resolution failed for foo.bar:18245: Name or service not known
$ x86_64-softmmu/qemu-system-x86_64 -vnc localhost:12345,reverse=on
Failed to start VNC server on `localhost:12345,reverse=on': Failed to connect to socket: Connection refused
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Before:
$ qemu-system-x86_64 nbd:localhost:12345
inet_connect_opts: connect(ipv4,yakj.usersys.redhat.com,127.0.0.1,12345): Connection refused
qemu-system-x86_64: could not open disk image nbd:localhost:12345: Connection refused
After:
$ x86_64-softmmu/qemu-system-x86_64 nbd:localhost:12345
qemu-system-x86_64: Failed to connect to socket: Connection refused
qemu-system-x86_64: could not open disk image nbd:localhost:12345: Connection refused
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
And remove the superfluous integer return value.
Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Error propagation is already there for socket backends. Add it to other
protocols, simplifying code that tests for errors that will never happen.
With all protocols understanding Error, the code can be simplified
further by removing the return value.
Unfortunately, the quality of error messages varies depending
on where the error is detected, because no Error is passed to the
NonBlockingConnectHandler. Thus, the exact error message still cannot
be sent to the user if the OS reports it asynchronously via SO_ERROR.
If NonBlockingConnectHandler received an Error**, we could for
example report the error class and/or message via a new field of the
query-migration command even if it is reported asynchronously.
Before:
(qemu) migrate fd:ffff
migrate: An undefined error has occurred
(qemu) info migrate
(qemu)
After:
(qemu) migrate fd:ffff
migrate: File descriptor named 'ffff' has not been found
(qemu) info migrate
capabilities: xbzrle: off
Migration status: failed
total time: 0 milliseconds
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This makes migration-unix.c again a cut-and-paste job from migration-tcp.c,
exactly as it was in the beginning. :)
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The call to migrate_fd_error() was missing for non-socket backends, so
centralize it in qmp_migrate().
Before:
(qemu) migrate fd:ffff
migrate: An undefined error has occurred
(qemu) info migrate
(qemu)
After:
(qemu) migrate fd:ffff
migrate: An undefined error has occurred
(qemu) info migrate
capabilities: xbzrle: off
Migration status: failed
total time: 0 milliseconds
(The awful error message will be fixed later in the series).
Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The migration code is using errp to detect "internal" errors, this means
that it relies on errp being non-NULL.
No impact so far because our only QMP clients (the QMP marshaller and HMP)
never pass a NULL Error **. But if we had others, this patch would make
sure that migration can work with a NULL Error **.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This patch mostly mimics what was done to TCP sockets, but simpler
because there is only one address to try. It also includes a free EINTR
bug fix.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
They are just wrappers and do not need a Win32-specific version.
Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This lets me adjust the clients to do proper error propagation first,
thus avoiding temporary regressions in the quality of the error messages.
Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
These functions help maintaining homogeneous formatting of error
messages that include strerror values.
Acked-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
* qemu-kvm/memory/urgent:
memory: abort if a memory region is destroyed during a transaction
i440fx: avoid destroying memory regions within a transaction
memory: Make eventfd adhere to device endianness
Add multiport serial card implementation, with two variants, one
featuring two and one featuring four ports.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Split serial.c into serial.c, serial.h and serial-isa.c. While being at
creating a serial.h header file move the serial prototypes from pc.h to
the new serial.h. The latter leads to s/pc.h/serial.h/ in tons of
boards which just want the serial bits from pc.h
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This makes it possible for QEMU to use transparent huge pages (THP)
when transparent_hugepage/enabled=madvise. Otherwise THP is only
used when it's enabled system wide.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
* quintela/migration-next-20121017: (41 commits)
cpus: create qemu_in_vcpu_thread()
savevm: make qemu_file_put_notify() return errors
savevm: un-export qemu_file_set_error()
block-migration: handle errors with the return codes correctly
block-migration: Switch meaning of return value
block-migration: make flush_blks() return errors
buffered_file: buffered_put_buffer() don't need to set last_error
savevm: Only qemu_fflush() can generate errors
savevm: make qemu_fill_buffer() be consistent
savevm: unexport qemu_ftell()
savevm: unfold qemu_fclose_internal()
savevm: make qemu_fflush() return an error code
savevm: Remove qemu_fseek()
virtio-net: use qemu_get_buffer() in a temp buffer
savevm: unexport qemu_fflush
migration: make migrate_fd_wait_for_unfreeze() return errors
buffered_file: make buffered_flush return the error code
buffered_file: callers of buffered_flush() already check for errors
buffered_file: We can access directly to bandwidth_limit
buffered_file: unfold migrate_fd_close
...
* qemu-kvm/memory/dma: (23 commits)
pci: honor PCI_COMMAND_MASTER
pci: give each device its own address space
memory: add address_space_destroy()
dma: make dma access its own address space
memory: per-AddressSpace dispatch
s390: avoid reaching into memory core internals
memory: use AddressSpace for MemoryListener filtering
memory: move tcg flush into a tcg memory listener
memory: move address_space_memory and address_space_io out of memory core
memory: manage coalesced mmio via a MemoryListener
xen: drop no-op MemoryListener callbacks
kvm: drop no-op MemoryListener callbacks
xen_pt: drop no-op MemoryListener callbacks
vfio: drop no-op MemoryListener callbacks
memory: drop no-op MemoryListener callbacks
memory: provide defaults for MemoryListener operations
memory: maintain a list of address spaces
memory: export AddressSpace
memory: prepare AddressSpace for exporting
xen_pt: use separate MemoryListeners for memory and I/O
...
Currently we ignore PCI_COMMAND_MASTER completely: DMA succeeds even when
the bit is clear.
Honor PCI_COMMAND_MASTER by inserting a memory region into the device's
bus master address space, and tying its enable status to PCI_COMMAND_MASTER.
Tested using
setpci -s 03 COMMAND=3
while a ping was running on a NIC in slot 3. The kernel (Linux) detected
the stall and recovered after the command
setpci -s 03 COMMAND=7
was issued.
Signed-off-by: Avi Kivity <avi@redhat.com>
Accesses from different devices can resolve differently
(depending on bridge settings, iommus, and PCI_COMMAND_MASTER), so
set up an address space for each device.
Currently iommus are expressed outside the memory API, so this doesn't
work if an iommu is present.
Signed-off-by: Avi Kivity <avi@redhat.com>
Instead of accessing the cpu address space, use an address space
configured by the caller.
Eventually all dma functionality will be folded into AddressSpace,
but we have to start from something.
Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Currently we use a global radix tree to dispatch memory access. This only
works with a single address space; to support multiple address spaces we
make the radix tree a member of AddressSpace (via an intermediate structure
AddressSpaceDispatch to avoid exposing too many internals).
A side effect is that address_space_io also gains a dispatch table. When
we remove all the pre-memory-API I/O registrations, we can use that for
dispatching I/O and get rid of the original I/O dispatch.
Signed-off-by: Avi Kivity <avi@redhat.com>
Using the AddressSpace type reduces confusion, as you can't accidentally
supply the MemoryRegion you're interested in.
Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
We plan to make the core listener listen to all address spaces; this
will cause many more flushes than necessary. Prepare for that by
moving the flush into a tcg-specific listener.
Later we can avoid registering the listener if tcg is disabled.
Signed-off-by: Avi Kivity <avi@redhat.com>
With this change, memory.c no longer knows anything about special address
spaces, so it is prepared for AddressSpace based DMA.
Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Instead of calling a global function on coalesced mmio changes, which
routes the call to kvm if enabled, add coalesced mmio hooks to
MemoryListener and make kvm use that instead.
The motivation is support for multiple address spaces (which means we
we need to filter the call on the right address space) but the result
is cleaner as well.
Signed-off-by: Avi Kivity <avi@redhat.com>
commit 38f419f352 fixed a breakage with CONFIG_QEMU_HELPERDIR
which has been introduced by 8bf188aa18. But while techinically
that fix has been correct, all other similar variables are handled
differently. Make it consistent, and let scripts/create_config
expand and capitalize the variable properly like for all other
qemu_*dir variables.
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Like the MOVr instruction, the FMOVr instruction has the condition
encoded between bits 10 and 12.
Cc: Blue Swirl <blauwirbel@gmail.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Use LOG_GUEST_ERROR rather than hw_error or direct fprintf.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Use LOG_UNIMP and LOG_GUEST_ERROR where appropriate rather
than hw_error().
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Use the new LOG_UNIMP and LOG_GUEST_ERROR logging types rather
than hw_error().
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
If the guest attempts an offset to a nonexistent register, just
log this via LOG_GUEST_ERROR rather than killing QEMU with a hw_error.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Use the new LOG_UNIMP tracing to report unimplemented
features.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Rather than a mix of direct printing to stderr and aborting
via hw_error(), use LOG_UNIMP and LOG_GUEST_ERROR.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Add an include of qemu-log.h to hw.h, so that device model
code has access to these logging functions without the need
to directly include qemu-log.h.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Add a new category for device models to log guest behaviour
which is likely to be a guest bug of some kind (accessing
nonexistent registers, reading 32 bit wide registers with
a byte access, etc). Making this its own log category allows
those who care (mostly guest OS authors) to see the complaints
without bothering most users.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
