Implement the preallocation modes falloc and full for growing qcow2
images.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20170613202107.10125-15-mreitz@redhat.com
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Now alloc_refcount_block() only contains a single fail label, so it
makes more sense to just name it "fail" instead of "fail_block".
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 20170613202107.10125-14-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
This function creates a collection of self-describing refcount
structures (including a new refcount table) at the end of a qcow2 image
file. Optionally, these structures can also describe a number of
additional clusters beyond themselves; this will be important for
preallocated truncation, which will place the data clusters and L2
tables there.
For now, we can use this function to replace the part of
alloc_refcount_block() that grows the refcount table (from which it is
actually derived).
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 20170613202107.10125-13-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
We can support PREALLOC_MODE_METADATA by invoking preallocate() in
qcow2_truncate().
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20170613202107.10125-12-mreitz@redhat.com
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
preallocate() is and will be called only from places that do not
otherwise need to lock s->lock: Currently that is qcow2_create2(), as of
a future patch it will be called from qcow2_truncate(), too.
It therefore makes sense to move locking that mutex into preallocate()
itself.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 20170613202107.10125-11-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
This patch adds two new parameters to the preallocate() function so we
will be able to use it not just for preallocating a new image but also
for preallocated image growth.
The offset parameter allows the caller to specify a virtual offset from
which to start preallocating. For newly created images this is always 0,
but for preallocating growth this will be the old image length.
The new_length parameter specifies the supposed new length of the image
(basically the "end offset" for preallocation). During image truncation,
bdrv_getlength() will return the old image length so we cannot rely on
its return value then.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 20170613202107.10125-10-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
By using raw_regular_truncate() in raw_truncate(), we can now easily
support preallocation.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 20170613202107.10125-9-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Currently, raw_regular_truncate() is intended for setting the size of a
newly created file. However, we also want to use it for truncating an
existing file in which case only the newly added space (when growing)
should be preallocated.
This also means that if resizing failed, we should try to restore the
original file size. This is important when using preallocation.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 20170613202107.10125-8-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
This functionality is part of raw_create() which we will be able to
reuse nicely in raw_truncate().
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20170613202107.10125-7-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Variables should be declared at the start of a block, and if a certain
parameter value is not supported it may be better to return -ENOTSUP
instead of -EINVAL.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20170613202107.10125-6-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
blk_truncate() itself will pass that value to bdrv_truncate(), and all
callers of blk_truncate() just set the parameter to PREALLOC_MODE_OFF
for now.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 20170613202107.10125-4-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
For block drivers that just pass a truncate request to the underlying
protocol, we can now pass the preallocation mode instead of aborting if
it is not PREALLOC_MODE_OFF.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 20170613202107.10125-3-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Add a PreallocMode parameter to the bdrv_truncate() function implemented
by each block driver. Currently, we always pass PREALLOC_MODE_OFF and no
driver accepts anything else.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 20170613202107.10125-2-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Use qcow2_calc_prealloc_size() to get the required file size.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Message-id: 20170705125738.8777-7-stefanha@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
The image creation options parsed by qcow2_create() are also needed to
implement .bdrv_measure(). Extract the parsing code, including input
validation.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Message-id: 20170705125738.8777-6-stefanha@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
The refcount metadata size calculation is inaccurate and can produce
numbers that are too small. This is bad because we should calculate a
conservative number - one that is guaranteed to be large enough.
This patch switches the approach to a fixed point calculation because
the existing equation is hard to solve when inaccuracies are taken care
of.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Message-id: 20170705125738.8777-5-stefanha@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Calculating the preallocated image size will be needed to implement
.bdrv_measure(). Extract the code out into a separate function.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Message-id: 20170705125738.8777-4-stefanha@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Maximum size calculation is trivial for the raw format: it's just the
requested image size (because there is no metadata).
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Message-id: 20170705125738.8777-3-stefanha@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
We should release them here to reload on invalidate cache.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 20170628120530.31251-31-vsementsov@virtuozzo.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Interface for removing persistent bitmap from its storage.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Message-id: 20170628120530.31251-28-vsementsov@virtuozzo.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Store bitmaps and mark them read-only on reopening image as read-only.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 20170628120530.31251-21-vsementsov@virtuozzo.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Store persistent dirty bitmaps in qcow2 image.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 20170628120530.31251-20-vsementsov@virtuozzo.com
[mreitz: Always assign ret in store_bitmap() in case of an error]
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Message-id: 20170628120530.31251-19-vsementsov@virtuozzo.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
New field BdrvDirtyBitmap.persistent means, that bitmap should be saved
by format driver in .bdrv_close and .bdrv_inactivate. No format driver
supports it for now.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-id: 20170628120530.31251-18-vsementsov@virtuozzo.com
[mreitz: Fixed indentation]
Signed-off-by: Max Reitz <mreitz@redhat.com>
Mirror AUTO flag from Qcow2 bitmap in BdrvDirtyBitmap. This will be
needed in future, to save this flag back to Qcow2 for persistent
bitmaps.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-id: 20170628120530.31251-16-vsementsov@virtuozzo.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Auto loading bitmaps are bitmaps in Qcow2, with the AUTO flag set. They
are loaded when the image is opened and become BdrvDirtyBitmaps for the
corresponding drive.
Extra data in bitmaps is not supported for now.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Message-id: 20170628120530.31251-12-vsementsov@virtuozzo.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
It will be needed in following commits for persistent bitmaps.
If bitmap is loaded from read-only storage (and we can't mark it
"in use" in this storage) corresponding BdrvDirtyBitmap should be
read-only.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-id: 20170628120530.31251-11-vsementsov@virtuozzo.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 20170628120530.31251-10-vsementsov@virtuozzo.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Add bitmap extension as specified in docs/specs/qcow2.txt.
For now, just mirror extension header into Qcow2 state and check
constraints. Also, calculate refcounts for qcow2 bitmaps, to not break
qemu-img check.
For now, disable image resize if it has bitmaps. It will be fixed later.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Message-id: 20170628120530.31251-9-vsementsov@virtuozzo.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
This is needed for the following patch, which will introduce refcounts
checking for qcow2 bitmaps.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Message-id: 20170628120530.31251-8-vsementsov@virtuozzo.com
[mreitz: s/inc_refcounts/qcow2_inc_refcounts_imrt/ in one more (new)
place]
Signed-off-by: Max Reitz <mreitz@redhat.com>
Add bdrv_dirty_bitmap_deserialize_ones() function, which is needed for
qcow2 bitmap loading, to handle unallocated bitmap parts, marked as
all-ones.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Message-id: 20170628120530.31251-7-vsementsov@virtuozzo.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Make getter signature const-correct. This allows other functions with
const dirty bitmap parameter use bdrv_dirty_bitmap_granularity().
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-id: 20170628120530.31251-6-vsementsov@virtuozzo.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
While the crypto layer uses a fixed option name "key-secret",
the upper block layer may have a prefix on the options. e.g.
"encrypt.key-secret", in order to avoid clashes between crypto
option names & other block option names. To ensure the crypto
layer can report accurate error messages, we must tell it what
option name prefix was used.
Reviewed-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 20170623162419.26068-19-berrange@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Now that all encryption keys must be provided upfront via
the QCryptoSecret API and associated block driver properties
there is no need for any explicit encryption handling APIs
in the block layer. Encryption can be handled transparently
within the block driver. We only retain an API for querying
whether an image is encrypted or not, since that is a
potentially useful piece of metadata to report to the user.
Reviewed-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 20170623162419.26068-18-berrange@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
This adds support for using LUKS as an encryption format
with the qcow2 file, using the new encrypt.format parameter
to request "luks" format. e.g.
# qemu-img create --object secret,data=123456,id=sec0 \
-f qcow2 -o encrypt.format=luks,encrypt.key-secret=sec0 \
test.qcow2 10G
The legacy "encryption=on" parameter still results in
creation of the old qcow2 AES format (and is equivalent
to the new 'encryption-format=aes'). e.g. the following are
equivalent:
# qemu-img create --object secret,data=123456,id=sec0 \
-f qcow2 -o encryption=on,encrypt.key-secret=sec0 \
test.qcow2 10G
# qemu-img create --object secret,data=123456,id=sec0 \
-f qcow2 -o encryption-format=aes,encrypt.key-secret=sec0 \
test.qcow2 10G
With the LUKS format it is necessary to store the LUKS
partition header and key material in the QCow2 file. This
data can be many MB in size, so cannot go into the QCow2
header region directly. Thus the spec defines a FDE
(Full Disk Encryption) header extension that specifies
the offset of a set of clusters to hold the FDE headers,
as well as the length of that region. The LUKS header is
thus stored in these extra allocated clusters before the
main image payload.
Aside from all the cryptographic differences implied by
use of the LUKS format, there is one further key difference
between the use of legacy AES and LUKS encryption in qcow2.
For LUKS, the initialiazation vectors are generated using
the host physical sector as the input, rather than the
guest virtual sector. This guarantees unique initialization
vectors for all sectors when qcow2 internal snapshots are
used, thus giving stronger protection against watermarking
attacks.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 20170623162419.26068-14-berrange@redhat.com
Reviewed-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
This converts the qcow2 driver to make use of the QCryptoBlock
APIs for encrypting image content, using the legacy QCow2 AES
scheme.
With this change it is now required to use the QCryptoSecret
object for providing passwords, instead of the current block
password APIs / interactive prompting.
$QEMU \
-object secret,id=sec0,file=/home/berrange/encrypted.pw \
-drive file=/home/berrange/encrypted.qcow2,encrypt.key-secret=sec0
The test 087 could be simplified since there is no longer a
difference in behaviour when using blockdev_add with encrypted
images for the running vs stopped CPU state.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 20170623162419.26068-12-berrange@redhat.com
Reviewed-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Instead of requiring separate input/output buffers for
encrypting data, change qcow2_encrypt_sectors() to assume
use of a single buffer, encrypting in place. The current
callers all used the same buffer for input/output already.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 20170623162419.26068-11-berrange@redhat.com
Reviewed-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
This converts the qcow driver to make use of the QCryptoBlock
APIs for encrypting image content. This is only wired up to
permit use of the legacy QCow encryption format. Users who wish
to have the strong LUKS format should switch to qcow2 instead.
With this change it is now required to use the QCryptoSecret
object for providing passwords, instead of the current block
password APIs / interactive prompting.
$QEMU \
-object secret,id=sec0,file=/home/berrange/encrypted.pw \
-drive file=/home/berrange/encrypted.qcow,encrypt.format=aes,\
encrypt.key-secret=sec0
Though note that running QEMU system emulators with the AES
encryption is no longer supported, so while the above syntax
is valid, QEMU will refuse to actually run the VM in this
particular example.
Likewise when creating images with the legacy AES-CBC format
qemu-img create -f qcow \
--object secret,id=sec0,file=/home/berrange/encrypted.pw \
-o encrypt.format=aes,encrypt.key-secret=sec0 \
/home/berrange/encrypted.qcow 64M
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 20170623162419.26068-10-berrange@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Instead of requiring separate input/output buffers for
encrypting data, change encrypt_sectors() to assume
use of a single buffer, encrypting in place. One current
caller uses the same buffer for input/output already
and the other two callers are easily converted to do so.
Reviewed-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 20170623162419.26068-9-berrange@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Historically the qcow & qcow2 image formats supported a property
"encryption=on" to enable their built-in AES encryption. We'll
soon be supporting LUKS for qcow2, so need a more general purpose
way to enable encryption, with a choice of formats.
This introduces an "encrypt.format" option, which will later be
joined by a number of other "encrypt.XXX" options. The use of
a "encrypt." prefix instead of "encrypt-" is done to facilitate
mapping to a nested QAPI schema at later date.
e.g. the preferred syntax is now
qemu-img create -f qcow2 -o encrypt.format=aes demo.qcow2
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 20170623162419.26068-8-berrange@redhat.com
Reviewed-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
The qcow driver refuses to open images which are less than
2 bytes in size, but will happily create such images. Add
a check in the create path to avoid this discrepancy.
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 20170623162419.26068-5-berrange@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
When integrating the crypto support with qcow/qcow2, we don't
want to use the bare LUKS option names "hash-alg", "key-secret",
etc. We need to namespace them to match the nested QAPI schema.
e.g. "encrypt.hash-alg", "encrypt.key-secret"
so that they don't clash with any general qcow options at a later
date.
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 20170623162419.26068-3-berrange@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
The block/crypto.c defines a set of QemuOpts that provide
parameters for encryption. This will also be needed by
the qcow/qcow2 integration, so expose the relevant pieces
in a new block/crypto.h header. Some helper methods taking
QemuOpts are changed to take QDict to simplify usage in
other places.
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 20170623162419.26068-2-berrange@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
We are gradually moving away from sector-based interfaces, towards
byte-based. In the common case, allocation is unlikely to ever use
values that are not naturally sector-aligned, but it is possible
that byte-based values will let us be more precise about allocation
at the end of an unaligned file that can do byte-based access.
Changing the signature of the function to use int64_t *pnum ensures
that the compiler enforces that all callers are updated. For now,
the io.c layer still assert()s that all callers are sector-aligned,
but that can be relaxed when a later patch implements byte-based
block status. Therefore, for the most part this patch is just the
addition of scaling at the callers followed by inverse scaling at
bdrv_is_allocated(). But some code, particularly stream_run(),
gets a lot simpler because it no longer has to mess with sectors.
Leave comments where we can further simplify by switching to
byte-based iterations, once later patches eliminate the need for
sector-aligned operations.
For ease of review, bdrv_is_allocated() was tackled separately.
Signed-off-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
bdrv_is_allocated_above() was relying on intermediate->total_sectors,
which is a field that can have stale contents depending on the value
of intermediate->has_variable_length. An audit shows that we are safe
(we were first calling through bdrv_co_get_block_status() which in
turn calls bdrv_nb_sectors() and therefore just refreshed the current
length), but it's nicer to favor our accessor functions to avoid having
to repeat such an audit, even if it means refresh_total_sectors() is
called more frequently.
Suggested-by: John Snow <jsnow@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Manos Pitsidianakis <el13635@mail.ntua.gr>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Max Reitz
Stefan Hajnoczi
Vladimir Sementsov-Ogievskiy
Daniel P. Berrange
Eric Blake