Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210419202257.161730-32-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210419202257.161730-31-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210419202257.161730-30-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210419202257.161730-29-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210419202257.161730-28-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
For 128-bit load/store, use 16-byte alignment. This
requires that we perform the two operations in the
correct order so that we generate the alignment fault
before modifying memory.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210419202257.161730-27-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
In the case of gpr load, merge the size and is_signed arguments;
otherwise, simply convert size to memop.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210419202257.161730-26-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210419202257.161730-25-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210419202257.161730-24-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210419202257.161730-23-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210419202257.161730-22-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210419202257.161730-21-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210419202257.161730-20-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210419202257.161730-19-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210419202257.161730-18-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210419202257.161730-17-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Adjust the interface to match what has been done to the
TCGv_i32 load/store functions.
This is less obvious, because at present the only user of
these functions, trans_VLDST_multiple, also wants to manipulate
the endianness to speed up loading multiple bytes. Thus we
retain an "internal" interface which is identical to the
current gen_aa32_{ld,st}_i64 interface.
The "new" interface will gain users as we remove the legacy
interfaces, gen_aa32_ld64 and gen_aa32_st64.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210419202257.161730-15-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Just because operating on a TCGv_i64 temporary does not
mean that we're performing a 64-bit operation. Restrict
the frobbing to actual 64-bit operations.
This bug is not currently visible because all current
users of these two functions always pass MO_64.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210419202257.161730-14-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This is the only caller. Adjust some commentary to talk
about SCTLR_B instead of the vanishing function.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210419202257.161730-13-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Create a finalize_memop function that computes alignment and
endianness and returns the final MemOp for the operation.
Split out gen_aa32_{ld,st}_internal_i32 which bypasses any special
handling of endianness or alignment. Adjust gen_aa32_{ld,st}_i32
so that s->be_data is not added by the callers.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210419202257.161730-12-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Use this to signal when memory access alignment is required.
This value comes from the CCR register for M-profile, and
from the SCTLR register for A-profile.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210419202257.161730-11-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Now that other bits have been moved out of tb->flags,
there's no point in filling from the top.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210419202257.161730-10-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Now that these bits have been moved out of tb->flags,
where TBFLAG_ANY was filling from the top, move AM32
to fill from the top, and A32 and M32 to fill from the
bottom. This means fewer changes when adding new bits.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210419202257.161730-9-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Now that we have all of the proper macros defined, expanding
the CPUARMTBFlags structure and populating the two TB fields
is relatively simple.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210419202257.161730-7-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
In preparation for splitting tb->flags across multiple
fields, introduce a structure to hold the value(s).
So far this only migrates the one uint32_t and fixes
all of the places that require adjustment to match.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210419202257.161730-6-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
We're about to split tbflags into two parts. These macros
will ensure that the correct part is used with the correct
set of bits.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210419202257.161730-5-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
We're about to rearrange the macro expansion surrounding tbflags,
and this field name will be expanded using the bit definition of
the same name, resulting in a token pasting error.
So PSTATE_SS -> PSTATE__SS in the uses, and document it.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210419202257.161730-4-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
We're about to rearrange the macro expansion surrounding tbflags,
and this field name will be expanded using the bit definition of
the same name, resulting in a token pasting error.
So SCTLR_B -> SCTLR__B in the 3 uses, and document it.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210419202257.161730-3-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The encoding of size = 2 and size = 3 had the incorrect decode
for align, overlapping the stride field. This error was hidden
by what should have been unnecessary masking in translate.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210419202257.161730-2-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The log2_esize parameter is not used except trivially.
Drop the parameter and the deferral to gen_mte_check1.
This fixes a bug in that the parameters as documented
in the header file were the reverse from those in the
implementation. Which meant that translate-sve.c was
passing the parameters in the wrong order.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210416183106.1516563-10-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Now that mte_check1 and mte_checkN have been merged, we can
merge sve_cont_ldst_mte_check1 and sve_cont_ldst_mte_checkN.
Which means that we can eliminate the function pointer into
sve_ldN_r and sve_stN_r, calling sve_cont_ldst_mte_check directly.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210416183106.1516563-9-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
For consistency with the mte_check1 + mte_checkN merge
to mte_check, rename the probe function as well.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210416183106.1516563-8-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The mte_check1 and mte_checkN functions are now identical.
Drop mte_check1 and rename mte_checkN to mte_check.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210416183106.1516563-7-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
After recent changes, mte_checkN does not use ESIZE,
and mte_check1 never used TSIZE. We can combine the
two into a single field: SIZEM1.
Choose to pass size - 1 because size == 0 is never used,
our immediate need in mte_probe_int is for the address
of the last byte (ptr + size - 1), and since almost all
operations are powers of 2, this makes the immediate
constant one bit smaller.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210416183106.1516563-6-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
We were incorrectly assuming that only the first byte of an MTE access
is checked against the tags. But per the ARM, unaligned accesses are
pre-decomposed into single-byte accesses. So by the time we reach the
actual MTE check in the ARM pseudocode, all accesses are aligned.
We cannot tell a priori whether or not a given scalar access is aligned,
therefore we must at least check. Use mte_probe_int, which is already
set up for checking multiple granules.
Buglink: https://bugs.launchpad.net/bugs/1921948
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210416183106.1516563-4-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Split out a helper function from mte_checkN to perform
all of the checking and address manpulation. So far,
just use this in mte_checkN itself.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210416183106.1516563-3-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
We were incorrectly assuming that only the first byte of an MTE access
is checked against the tags. But per the ARM, unaligned accesses are
pre-decomposed into single-byte accesses. So by the time we reach the
actual MTE check in the ARM pseudocode, all accesses are aligned.
Therefore, the first failure is always either the first byte of the
access, or the first byte of the granule.
In addition, some of the arithmetic is off for last-first -> count.
This does not become directly visible until a later patch that passes
single bytes into this function, so ptr == ptr_last.
Buglink: https://bugs.launchpad.net/bugs/1921948
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210416183106.1516563-2-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
[PMM: tweaked a comment]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The Arm ARM specifies that for Thumb encodings of the various plain
store insns, if the Rn field is 1111 then we must UNDEF. This is
different from the Arm encodings, where this case is either
UNPREDICTABLE or has well-defined behaviour. The exclusive stores,
store-release and STRD do not have this UNDEF case for any encoding.
Enforce the UNDEF for this case in the Thumb plain store insns.
Fixes: https://bugs.launchpad.net/qemu/+bug/1922887
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210408162402.5822-1-peter.maydell@linaro.org
This is a left over erroneous check from the days front-ends handled
io start/end themselves. Regardless just because IO could be performed
on the last instruction doesn't obligate the front end to do so.
This fixes an abort faced by the aspeed execute-in-place support which
will necessarily trigger this state (even before the one-shot
CF_LAST_IO fix). The test still seems to hang once it attempts to boot
the Linux kernel but I suspect this is an unrelated issue with icount
and the timer handling code.
The original intention of the cpu_abort (added in commit 2e70f6efa8
when the icount stuff was first added) seems to have been to act as
an assert() to catch an unhandled corner case where the generated code
would be something like:
conditional branch to condlabel if its cc failed
implementation of the insn (a conditional branch or trap)
code emitted by gen_io_end()
condlabel:
gen_goto_tb or equivalent thing to go to next insn
At runtime the cc-failed case would skip over the code emitted by
gen_io_end(), leaving the can_do_io flag incorrectly set.
In commit ba3e792669 we switched to an implementation which
always clears can_do_io at the start of the following TB instead
of trying to clear it at the end of a TB that did IO. So the corner
case that this cpu_abort() was trying to flag is no longer possible,
because the gen_io_end() call has been deleted. We can therefore
safely remove the no-longer-valid assertion.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20210416170207.12504-1-alex.bennee@linaro.org
Cc: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
We can remove PAGE_WRITE when (internally) marking a page
read-only because it contains translated code.
This can be triggered by tests/tcg/aarch64/bti-2, after
having serviced SIGILL trampolines on the stack.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This reverts commit f7fb73b8cd.
This change turned out to be a bit half-baked, and doesn't
work with KVM, which fails with the error:
"qemu-system-aarch64: Failed to retrieve host CPU features"
because KVM does not allow accessing of the PMCR_EL0 value in
the scratch "query CPU ID registers" VM unless we have first
set the KVM_ARM_VCPU_PMU_V3 feature on the VM.
Revert the change for 6.0.
Reported-by: Zenghui Yu <yuzenghui@huawei.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Tested-by: Zenghui Yu <yuzenghui@huawei.com>
Message-id: 20210331154822.23332-1-peter.maydell@linaro.org
Currently we give all the v7-and-up CPUs a PMU with 4 counters. This
means that we don't provide the 6 counters that are required by the
Arm BSA (Base System Architecture) specification if the CPU supports
the Virtualization extensions.
Instead of having a single PMCR_NUM_COUNTERS, make each CPU type
specify the PMCR reset value (obtained from the appropriate TRM), and
use the 'N' field of that value to define the number of counters
provided.
This means that we now supply 6 counters for Cortex-A53, A57, A72,
A15 and A9 as well as '-cpu max'; Cortex-A7 and A8 stay at 4; and
Cortex-R5 goes down to 3.
Note that because we now use the PMCR reset value of the specific
implementation, we no longer set the LC bit out of reset. This has
an UNKNOWN value out of reset for all cores with any AArch32 support,
so guest software should be setting it anyway if it wants it.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Tested-by: Marcin Juszkiewicz <marcin.juszkiewicz@linaro.org>
Message-id: 20210311165947.27470-1-peter.maydell@linaro.org
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Pretend the fault always happens at page table level 3.
Failure to set this leaves level = 0, which is impossible for
ARMFault_Permission, and produces an invalid syndrome, which
reaches g_assert_not_reached in cpu_loop.
Fixes: 8db94ab4e5 ("linux-user/aarch64: Pass syndrome to EXC_*_ABORT")
Reported-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20210320000606.1788699-1-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
For Arm M-profile CPUs, on reset the CPU must load its initial PC and
SP from a vector table in guest memory. Because we can't guarantee
reset ordering, we have to handle the possibility that the ROM blob
loader's reset function has not yet run when the CPU resets, in which
case the data in an ELF file specified by the user won't be in guest
memory to be read yet.
We work around the reset ordering problem by checking whether the ROM
blob loader has any data for the address where the vector table is,
using rom_ptr(). Unfortunately this does not handle the possibility
of memory aliasing. For many M-profile boards, memory can be
accessed via multiple possible physical addresses; if the board has
the vector table at address X but the user's ELF file loads data via
a different address Y which is an alias to the same underlying guest
RAM then rom_ptr() will not find it.
Use the new rom_ptr_for_as() function, which deals with memory
aliasing when locating a relevant ROM blob.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210318174823.18066-6-peter.maydell@linaro.org
The virt machine already checks KVM_CAP_ARM_VM_IPA_SIZE to get the
upper bound of the IPA size. If that bound is lower than the highest
possible GPA for the machine, then QEMU will error out. However, the
IPA is set to 40 when the highest GPA is less than or equal to 40,
even when KVM may support an IPA limit as low as 32. This means KVM
may fail the VM creation unnecessarily. Additionally, 40 is selected
with the value 0, which means use the default, and that gets around
a check in some versions of KVM, causing a difficult to debug fail.
Always use the IPA size that corresponds to the highest possible GPA,
unless it's lower than 32, in which case use 32. Also, we must still
use 0 when KVM only supports the legacy fixed 40 bit IPA.
Suggested-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Andrew Jones <drjones@redhat.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Message-id: 20210310135218.255205-3-drjones@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
With the reduction operations, we intentionally increase maxsz to
the next power of 2, so as to fill out the reduction tree correctly.
Since e2e7168a21, oprsz must equal maxsz, with exceptions for small
vectors, so this triggers an assertion for vector sizes > 32 that are
not themselves a power of 2.
Pass the power-of-two value in the simd_data field instead.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210309155305.11301-9-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Since b64ee454a4, all predicate operations should be
using these field macros for predicates.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210309155305.11301-8-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Since b64ee454a4, all predicate operations should be
using these field macros for predicates.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210309155305.11301-7-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Since b64ee454a4, all predicate operations should be
using these field macros for predicates.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210309155305.11301-6-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
