This function can fail, which makes it more like ftrylockfile
or pthread_mutex_trylock than flockfile or pthread_mutex_lock,
so rename it.
To closer match the other trylock functions, release rcu_read_lock
along the failure path, so that qemu_log_unlock need not be called
on failure.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220417183019.755276-8-richard.henderson@linaro.org>
Do not force exit within qemu_set_log; return bool and pass
an Error value back up the stack as per usual.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220417183019.755276-5-richard.henderson@linaro.org>
- Some changes for qcow2's refcount repair algorithm to make it work for
qcow2 images stored on block devices
- Skip test cases that require zstd when support for it is missing
- Some refactoring in the iotests' meson.build
-----BEGIN PGP SIGNATURE-----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=BF0c
-----END PGP SIGNATURE-----
Merge tag 'pull-block-2022-04-20' of https://gitlab.com/hreitz/qemu into staging
Block patches:
- Some changes for qcow2's refcount repair algorithm to make it work for
qcow2 images stored on block devices
- Skip test cases that require zstd when support for it is missing
- Some refactoring in the iotests' meson.build
# -----BEGIN PGP SIGNATURE-----
#
# iQJGBAABCAAwFiEEy2LXoO44KeRfAE00ofpA0JgBnN8FAmJf/asSHGhyZWl0ekBy
# ZWRoYXQuY29tAAoJEKH6QNCYAZzfYXUQAKQv5qKQBjU4MTwlS8A4h6B6OJgC1Sik
# 9BB7LO/QFjuuF4vNKpcUlf6i0epxPP8B5pmCjaAolMh6u6wZwL7hHq+SOYXvejTo
# vINW+r097U0qYPkSV+cS6tbW92rYJDD7VxF+34udiWXGjozsBTw/k9DfJaa9Ht66
# 2dw3AxUa4lxN1/ejFzDLx3DNaff+HctLhgVpHeBb0eN2zr2Ug5+ZFgMoiWwU6r6J
# EzTORLAzATerlQVYUkhh4Y/UdVLLw1SzTWOQv5b/NqvaLfKmYsQobSfjC2ajO8XJ
# P2REigcOAij5uWVRf4EY7xoqmADP8pXxuOTzw0hyGNLOLNcXoFbfW45WSPoY+YgH
# EH1TtC4vMsg/MlO/A3PJr9v+SNqxz32cul3MVrY3PuG4Dzz0riy9GhtFUU37igbj
# mR6pP3nSa/f2X4+9B6/UrPjLzusRvc8bvzYqVEnSLABav11npphkYaR9QT1fQUVD
# Zw26igXtmLKUcfop/EqShbhblk0ZLYDTj/Lx7X+thC9OCrK1QgF6qAsIUqiS1iHz
# vwdktRTCofo4ZIT/OCz5QeriJqDz0B7VJ8/4i/uvm2eq8BUsn2mJuyAGD2XtaONV
# rmASrV9VbajdxX5VptjKOOHG6aHtqQlKbyBFog8I4nqVFdjdSMalb++gBMCrPu1A
# 1iZPsOOyz/8+
# =BF0c
# -----END PGP SIGNATURE-----
# gpg: Signature made Wed 20 Apr 2022 05:33:47 AM PDT
# gpg: using RSA key CB62D7A0EE3829E45F004D34A1FA40D098019CDF
# gpg: issuer "hreitz@redhat.com"
# gpg: Good signature from "Hanna Reitz <hreitz@redhat.com>" [undefined]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: CB62 D7A0 EE38 29E4 5F00 4D34 A1FA 40D0 9801 9CDF
* tag 'pull-block-2022-04-20' of https://gitlab.com/hreitz/qemu:
qcow2: Add errp to rebuild_refcount_structure()
iotests/108: Test new refcount rebuild algorithm
qcow2: Improve refcount structure rebuilding
iotests/303: Check for zstd support
iotests/065: Check for zstd support
iotests.py: Add supports_qcow2_zstd_compression()
tests/qemu-iotests: Move the bash and sanitizer checks to meson.build
tests/qemu-iotests/meson.build: Improve the indentation
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
One clear problem with how qcow2's refcount structure rebuild algorithm
used to be before "qcow2: Improve refcount structure rebuilding" was
that it is prone to failure for qcow2 images on block devices: There is
generally unused space after the actual image, and if that exceeds what
one refblock covers, the old algorithm would invariably write the
reftable past the block device's end, which cannot work. The new
algorithm does not have this problem.
Test it with three tests:
(1) Create an image with more empty space at the end than what one
refblock covers, see whether rebuilding the refcount structures
results in a change in the image file length. (It should not.)
(2) Leave precisely enough space somewhere at the beginning of the image
for the new reftable (and the refblock for that place), see whether
the new algorithm puts the reftable there. (It should.)
(3) Test the original problem: Create (something like) a block device
with a fixed size, then create a qcow2 image in there, write some
data, and then have qemu-img check rebuild the refcount structures.
Before HEAD^, the reftable would have been written past the image
file end, i.e. outside of what the block device provides, which
cannot work. HEAD^ should have fixed that.
("Something like a block device" means a loop device if we can use
one ("sudo -n losetup" works), or a FUSE block export with
growable=false otherwise.)
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20220405134652.19278-3-hreitz@redhat.com>
303 runs two test cases, one of which requires zstd support.
Unfortunately, given that this is not a unittest-style test, we cannot
easily skip that single case, and instead can only skip the whole test.
(Alternatively, we could split this test into a zlib and a zstd part,
but that seems excessive, given that this test is not in auto and thus
likely only run by developers who have zstd support compiled in.)
Fixes: 677e0bae68 ("iotest 303: explicit compression type")
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <v.sementsov-og@mail.ru>
Message-Id: <20220323105522.53660-4-hreitz@redhat.com>
Some test cases run in iotest 065 want to run with zstd compression just
for added coverage. Run them with zlib if there is no zstd support
compiled in.
Reported-by: Thomas Huth <thuth@redhat.com>
Fixes: 12a936171d ("iotest 065: explicit compression type")
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20220323105522.53660-3-hreitz@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <v.sementsov-og@mail.ru>
Suggested-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20220323105522.53660-2-hreitz@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <v.sementsov-og@mail.ru>
We want to get rid of check-block.sh in the long run, so let's move
the checks for the bash version and sanitizers from check-block.sh
into the meson.build file instead.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20220223093840.2515281-4-thuth@redhat.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
By using subdir_done(), we can get rid of one level of indentation
in this file. This will make it easier to add more conditions to
skip the iotests in future patches.
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20220223093840.2515281-3-thuth@redhat.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Removes the hard-coded values in setUp(). Class inheriting from
avocado_qemu.LinuxTest can overwrite the default smp and memory instead.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/453
Signed-off-by: Ahmed Abouzied <email@aabouzied.com>
Message-Id: <20210802222257.50946-1-email@aabouzied.com>
Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Eric noticed while attempting to enable the vhost-user-blk-test for
Aarch64 that that things didn't work unless he put in a dummy
guest_malloc() at the start of the test. Without it
qvirtio_wait_used_elem() would assert when it reads a junk value for
idx resulting in:
qvirtqueue_get_buf: idx:2401 last_idx:0
qvirtqueue_get_buf: 0x7ffcb6d3fe74, (nil)
qvirtio_wait_used_elem: 3000000/0
ERROR:../../tests/qtest/libqos/virtio.c:226:qvirtio_wait_used_elem: assertion failed (got_desc_idx == desc_idx): (50331648 == 0)
Bail out! ERROR:../../tests/qtest/libqos/virtio.c:226:qvirtio_wait_used_elem: assertion failed (got_desc_idx == desc_idx): (50331648 == 0)
What was actually happening is the guest_malloc() effectively pushed
the allocation of the vring into the next page which just happened to
have clear memory. After much tedious tracing of the code I could see
that qvring_init() does attempt initialise a bunch of the vring
structures but skips the vring->used.idx value. It is probably not
wise to assume guest memory is zeroed anyway. Once the ring is
properly initialised the hack is no longer needed to get things
working.
Thanks-to: John Snow <jsnow@redhat.com> for helping debug
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20220406173356.1891500-1-alex.bennee@linaro.org>
Tested-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The fuzz tests are currently scheduled for all targets, but their setup
code limits the run to "i386", so that these tests always show "SKIP"
on other targets. Move it to the right x86 list in meson.build, then
we can drop the architecture check during runtime, too.
Message-Id: <20220414130127.719528-1-thuth@redhat.com>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Allow the same set of tests for all MIPS targets, so that "mipsel"
now gets some additional test coverage, too. While we're at it,
simplify the definitions for qtests_mips64 and qtests_mips64el.
Message-Id: <20220414114655.604391-1-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The perl test harness is not necessary anymore since commit 3d2f73ef75
("build: use "meson test" as the test harness"). Thus remove it from
tests/lcitool/projects/qemu.yml, run "make lcitool-refresh" and manually
clean the remaining docker / vm files that are not managed by lcitool yet.
Message-Id: <20220329102808.423681-1-thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Replace the global variables with inlined helper functions. getpagesize() is very
likely annotated with a "const" function attribute (at least with glibc), and thus
optimization should apply even better.
This avoids the need for a constructor initialization too.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20220323155743.1585078-12-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Use more idiomatic glib/auto-style code.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220323155743.1585078-11-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Convert the TARGET_WORDS_BIGENDIAN macro, similarly to what was done
with HOST_BIG_ENDIAN. The new TARGET_BIG_ENDIAN macro is either 0 or 1,
and thus should always be defined to prevent misuse.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Suggested-by: Halil Pasic <pasic@linux.ibm.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220323155743.1585078-8-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Replace a config-time define with a compile time condition
define (compatible with clang and gcc) that must be declared prior to
its usage. This avoids having a global configure time define, but also
prevents from bad usage, if the config header wasn't included before.
This can help to make some code independent from qemu too.
gcc supports __BYTE_ORDER__ from about 4.6 and clang from 3.2.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
[ For the s390x parts I'm involved in ]
Acked-by: Halil Pasic <pasic@linux.ibm.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220323155743.1585078-7-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When running "make lcitool-refresh", this currently uses the hard-coded
/usr/bin/python3 from the script's shebang line for running Python.
That's bad, since neither /usr/bin/python3 is guaranteed to exist, nor
does it honor the python interpreter that the user might have chosen
while running the "configure" script. Thus let's rather use $(PYTHON)
in the Makefile, and improve the shebang line in the script in case
someone runs this directly.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220329063958.262669-1-thuth@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
- Disable GLOBAL_STATE_CODE() assertion for the 7.0 release: We got
another bug report for this, and we do not have the time to
investigate before 7.0, so disable the assertion for the release, to
re-enable and continue investigation in the 7.1 cycle
- stream job fix (regarding interaction with concurrent block jobs)
- iotests fixes
-----BEGIN PGP SIGNATURE-----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=JjXm
-----END PGP SIGNATURE-----
Merge tag 'pull-block-2022-03-29' of https://gitlab.com/hreitz/qemu into staging
Block patches for 7.0-rc2:
- Disable GLOBAL_STATE_CODE() assertion for the 7.0 release: We got
another bug report for this, and we do not have the time to
investigate before 7.0, so disable the assertion for the release, to
re-enable and continue investigation in the 7.1 cycle
- stream job fix (regarding interaction with concurrent block jobs)
- iotests fixes
# gpg: Signature made Tue 29 Mar 2022 15:55:33 BST
# gpg: using RSA key CB62D7A0EE3829E45F004D34A1FA40D098019CDF
# gpg: issuer "hreitz@redhat.com"
# gpg: Good signature from "Hanna Reitz <hreitz@redhat.com>" [marginal]
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg: It is not certain that the signature belongs to the owner.
# Primary key fingerprint: CB62 D7A0 EE38 29E4 5F00 4D34 A1FA 40D0 9801 9CDF
* tag 'pull-block-2022-03-29' of https://gitlab.com/hreitz/qemu:
iotests: Fix status checks
block/stream: Drain subtree around graph change
main-loop: Disable GLOBAL_STATE_CODE() assertions
iotests: update test owner contact information
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
If the migration is over before we cancel it, we are
waiting in a loop a state that never comes because the state
is already "completed".
To avoid an infinite loop, skip the test if the migration
is "completed" before we were able to cancel it.
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Acked-by: Thomas Huth <thuth@redhat.com>
Message-id: 20220329124259.355995-1-lvivier@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
An iotest's 'paused' condition is fickle; it will be reported as true
whenever the job is drained, for example, or when it is in the process
of completing.
030 and 041 contain such checks, we should replace them by checking the
job status instead. (As was done for 129 in commit f9a6256b48
for the 'busy' condition.)
Additionally, when we want to test that a job is paused on error, we
might want to give it some time to actually switch to the paused state.
Do that by waiting on the corresponding JOB_STATUS_CHANGE event. (But
only if they are not already paused; the loops these places are in fetch
all VM events, so they may have already fetched that event from the
queue.)
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20220324180221.24508-1-hreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
When the stream block job cuts out the nodes between top and base in
stream_prepare(), it does not drain the subtree manually; it fetches the
base node, and tries to insert it as the top node's backing node with
bdrv_set_backing_hd(). bdrv_set_backing_hd() however will drain, and so
the actual base node might change (because the base node is actually not
part of the stream job) before the old base node passed to
bdrv_set_backing_hd() is installed.
This has two implications:
First, the stream job does not keep a strong reference to the base node.
Therefore, if it is deleted in bdrv_set_backing_hd()'s drain (e.g.
because some other block job is drained to finish), we will get a
use-after-free. We should keep a strong reference to that node.
Second, even with such a strong reference, the problem remains that the
base node might change before bdrv_set_backing_hd() actually runs and as
a result the wrong base node is installed.
Both effects can be seen in 030's TestParallelOps.test_overlapping_5()
case, which has five nodes, and simultaneously streams from the middle
node to the top node, and commits the middle node down to the base node.
As it is, this will sometimes crash, namely when we encounter the
above-described use-after-free.
Taking a strong reference to the base node, we no longer get a crash,
but the resuling block graph is less than ideal: The expected result is
obviously that all middle nodes are cut out and the base node is the
immediate backing child of the top node. However, if stream_prepare()
takes a strong reference to its base node (the middle node), and then
the commit job finishes in bdrv_set_backing_hd(), supposedly dropping
that middle node, the stream job will just reinstall it again.
Therefore, we need to keep the whole subtree drained in
stream_prepare(), so that the graph modification it performs is
effectively atomic, i.e. that the base node it fetches is still the base
node when bdrv_set_backing_hd() sets it as the top node's backing node.
Verify this by asserting in said 030's test case that the base node is
always the top node's immediate backing child when both jobs are done.
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20220324140907.17192-1-hreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Acked-by: Vladimir Sementsov-Ogievskiy <v.sementsov-og@mail.ru>
Quite a few of these tests have stale contact information. This patch
updates the stale ones that I happen to be aware of at the moment.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-Id: <20220322174212.1169630-1-jsnow@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
This was attempted in commit 533b0a1a41 ("tests/tcg: Fix target-specific
Makefile variables path for user-mode", 2022-01-12) but it also used the
wrong path; default.mak is used for config/devices, not config/targets.
While at it, explain what the inclusion is about.
Cc: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
"make clean" should clear all binaries that have been built, but so
far it left the TCG tests still in place. Let's make sure that they
are now removed, too.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220301085900.1443232-1-thuth@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Hi,
A collection of fixes & cleanup patches that should be safe for 7.0 inclusion.
-----BEGIN PGP SIGNATURE-----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=fKgO
-----END PGP SIGNATURE-----
Merge tag 'fixes-pull-request' of gitlab.com:marcandre.lureau/qemu into staging
Fixes and cleanups for 7.0
Hi,
A collection of fixes & cleanup patches that should be safe for 7.0 inclusion.
# gpg: Signature made Tue 22 Mar 2022 12:11:30 GMT
# gpg: using RSA key 87A9BD933F87C606D276F62DDAE8E10975969CE5
# gpg: issuer "marcandre.lureau@redhat.com"
# gpg: Good signature from "Marc-André Lureau <marcandre.lureau@redhat.com>" [full]
# gpg: aka "Marc-André Lureau <marcandre.lureau@gmail.com>" [full]
# Primary key fingerprint: 87A9 BD93 3F87 C606 D276 F62D DAE8 E109 7596 9CE5
* tag 'fixes-pull-request' of gitlab.com:marcandre.lureau/qemu: (21 commits)
qapi: remove needless include
Remove trailing ; after G_DEFINE_AUTO macro
tests: remove needless include
error: use GLib to remember the program name
qga: remove bswap.h include
qapi: remove needless include
meson: fix CONFIG_ATOMIC128 check
meson: move int128 checks from configure
qapi: remove needless include
util: remove the net/net.h dependency
util: remove needless includes
scripts/modinfo-collect: remove unused/dead code
Move HOST_LONG_BITS to compiler.h
Simplify HOST_LONG_BITS
compiler.h: replace QEMU_SENTINEL with G_GNUC_NULL_TERMINATED
compiler.h: replace QEMU_WARN_UNUSED_RESULT with G_GNUC_WARN_UNUSED_RESULT
Replace GCC_FMT_ATTR with G_GNUC_PRINTF
Drop qemu_foo() socket API wrapper
m68k/nios2-semi: fix gettimeofday() result check
vl: typo fix in a comment
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
One less qemu-specific macro. It also helps to make some headers/units
only depend on glib, and thus moved in standalone projects eventually.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Richard W.M. Jones <rjones@redhat.com>
The socket API wrappers were initially introduced in commit
00aa0040 ("Wrap recv to avoid warnings"), but made redundant with
commit a2d96af4 ("osdep: add wrappers for socket functions") which fixes
the win32 declarations and thus removed the earlier warnings.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Commit e3296cc796 made the ssh block
driver's error message for fingerprint mismatches more verbose, so it
now prints the actual host key fingerprint and the key type.
iotest 207 tests such errors, but was not amended to filter that
fingerprint (which is host-specific), so do it now. Filter the key
type, too, because I guess this too can differ depending on the host
configuration.
Fixes: e3296cc796
("block: print the server key type and fingerprint on failure")
Reported-by: John Snow <jsnow@redhat.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20220318125304.66131-3-hreitz@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Allow filters for VM.run_job(), and pass the filters given to
VM.blockdev_create() to it.
(Use this opportunity to annotate VM.run_job()'s parameter types;
unfortunately, for the filter, I could not come up with anything better
than Callable[[Any], Any] that would pass mypy's scrutiny.)
At one point, a plain string is logged, so the filters passed to it must
work fine with plain strings. The only filters passed to it at this
point are the ones from VM.blockdev_create(), which are
filter_qmp_test_files() (by default) and 207's filter_hash(). Both
cannot handle plain strings yet, but we can make them by amending
filter_qmp() to treat them as plain values with a None key.
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20220318125304.66131-2-hreitz@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Add a `check: bool = True` parameter to both functions and make their
qemu_img() invocations raise on error by default.
users of img_info_log:
206, 207, 210, 211, 212, 213, 237, 242, 266, 274, 302
users of qemu_img_log:
044, 209, 274, 302, 304
iotests 242 and 266 need to use check=False for their negative tests.
iotests 206, 210, 211, 212, 213, 237, 274 and 302 continue working
normally.
As of this commit, all calls to QEMU_IMG made from iotests enforce a
return code of zero by default unless explicitly disabled or suppressed
by passing check=False or with an exception handler.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-Id: <20220321201618.903471-19-jsnow@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
With the exceptional 'create' calls removed in the prior commit, change
qemu_img_log() and img_info_log() to call qemu_img() directly
instead.
For now, allow these calls to qemu-img to return non-zero on the basis
that any unusual output will be logged anyway. The very next commit
begins to enforce a successful exit code by default even for the logged
functions.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-Id: <20220321201618.903471-18-jsnow@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
qemu_img_log() calls into qemu_img_pipe(), which always removes output
for 'create' commands on success anyway. Replace all of these calls to
the simpler qemu_img_create(...) which doesn't log, but raises a
detailed exception object on failure instead.
Blank lines are removed from output files where appropriate.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20220321201618.903471-17-jsnow@redhat.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Admittedly a mostly lateral move, but qemu_img() is essentially the
replacement for qemu_img_pipe_and_status(). It will give slightly better
diagnostics on crash.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20220321201618.903471-16-jsnow@redhat.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
As part of moving all python iotest invocations of qemu-img onto a
single qemu_img() implementation, remove a few lingering uses of
qemu_img_pipe() from outside of iotests.py itself.
Several cases here rely on the knowledge that qemu_img_pipe() suppresses
*all* output on a successful case when the command being issued is
'create'.
065: This call's output is inspected, but it appears as if it's expected
to succeed. Replace this call with the checked qemu_img() variant
instead to get better diagnostics if/when qemu-img itself fails.
237: "create" call output isn't actually logged. Use qemu_img_create()
instead, which checks the return code. Remove the empty lines from
the test output.
296: Two calls;
-create: Expected to succeed. Like other create calls, the output
isn't actually logged. Switch to a checked variant
(qemu_img_create) instead. The output for this test is
a mixture of both test styles, so actually replace the
blank line for readability.
-amend: This is expected to fail. Log the output.
After this patch, the only uses of qemu_img_pipe are internal to
iotests.py and will be removed in subsequent patches.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20220321201618.903471-15-jsnow@redhat.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
qemu_img_pipe calls blank their output when the command being run is a
'create' call and the command succeeds. Thus, the normative output for
this command in iotest 149 is to print a blank line. We can remove the
logging from this invocation and use a checked invocation, but we still
need to inspect the actual output to see if we want to retroactively
skip the test due to missing cipher support.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20220321201618.903471-14-jsnow@redhat.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
qemu_img_pipe() discards the return code from qemu-img in favor of
returning just its output. Some tests using this function don't save,
log, or check the output either, though, which is unsafe.
Replace all of these calls with a checked version.
Tests affected are 194, 202, 203, 234, 262, and 303.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20220321201618.903471-13-jsnow@redhat.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Similar to other recent changes: use the qemu_img() invocation that
supports throwing loud, nasty exceptions when it fails for surprising
reasons.
(Why would "--help" ever fail? I don't know, but eliminating *all* calls
to qemu-img that do not go through qemu_img() is my goal, so
qemu_img_pipe() has to be removed.)
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20220321201618.903471-12-jsnow@redhat.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Add a qemu_img_map() function by analogy with qemu_img_measure(),
qemu_img_check(), and qemu_img_info() that all return JSON information.
Replace calls to qemu_img_pipe('map', '--output=json', ...) with this
new function, which provides better diagnostic information on failure.
Note: The output for iotest 211 changes, because logging JSON after it
was deserialized by Python behaves a little differently than logging the
raw JSON document string itself.
(iotests.log() sorts the keys for Python 3.6 support.)
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20220321201618.903471-11-jsnow@redhat.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
This removes two more usages of qemu_img_pipe() and replaces them with
calls to qemu_img(), which provides better diagnostic information on
failure.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20220321201618.903471-10-jsnow@redhat.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Add qemu_img_info() by analogy with qemu_img_measure() and
qemu_img_check(). Modify image_size() to use this function instead to
take advantage of the better diagnostic information on failure provided
(ultimately) by qemu_img().
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20220321201618.903471-9-jsnow@redhat.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
qemu_img_json() gives better diagnostic information on failure.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20220321201618.903471-8-jsnow@redhat.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Richard Henderson
Hanna Reitz
Thomas Huth
Ahmed Abouzied
Alex Bennée
Marc-André Lureau
Peter Maydell
Laurent Vivier
John Snow
Paolo Bonzini