Commit Graph

314 Commits

Author SHA1 Message Date
Eric Auger 201a733145 vfio/common: Introduce vfio_set_irq_signaling helper
The code used to assign an interrupt index/subindex to an
eventfd is duplicated many times. Let's introduce an helper that
allows to set/unset the signaling for an ACTION_TRIGGER,
ACTION_MASK or ACTION_UNMASK action.

In the error message, we now use errno in case of any
VFIO_DEVICE_SET_IRQS ioctl failure.

Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Li Qiang <liq3ea@gmail.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2019-06-13 09:57:37 -06:00
Alex Williamson c60807dea5 vfio/pci: Allow MSI-X relocation to fixup bogus PBA
The MSI-X relocation code can sometimes be used to work around bogus
MSI-X capabilities, but this test for whether the PBA is outside of
the specified BAR causes the device to error before we can apply a
relocation.  Let it proceed if we intend to relocate MSI-X anyway.

Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2019-06-13 09:57:36 -06:00
Alex Williamson 3412d8ec98 vfio/pci: Hide Resizable BAR capability
The resizable BAR capability is currently exposed read-only from the
kernel and we don't yet implement a protocol for virtualizing it to
the VM.  Exposing it to the guest read-only introduces poor behavior
as the guest has no reason to test that a control register write is
accepted by the hardware.  This can lead to cases where the guest OS
assumes the BAR has been resized, but it hasn't.  This has been
observed when assigning AMD Vega GPUs.

Note, this does not preclude future enablement of resizable BARs, but
it's currently incorrect to expose this capability as read-only, so
better to not expose it at all.

Reported-by: James Courtier-Dutton <james.dutton@gmail.com>
Tested-by: James Courtier-Dutton <james.dutton@gmail.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2019-06-13 09:57:36 -06:00
Markus Armbruster a8d2532645 Include qemu-common.h exactly where needed
No header includes qemu-common.h after this commit, as prescribed by
qemu-common.h's file comment.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190523143508.25387-5-armbru@redhat.com>
[Rebased with conflicts resolved automatically, except for
include/hw/arm/xlnx-zynqmp.h hw/arm/nrf51_soc.c hw/arm/msf2-soc.c
block/qcow2-refcount.c block/qcow2-cluster.c block/qcow2-cache.c
target/arm/cpu.h target/lm32/cpu.h target/m68k/cpu.h target/mips/cpu.h
target/moxie/cpu.h target/nios2/cpu.h target/openrisc/cpu.h
target/riscv/cpu.h target/tilegx/cpu.h target/tricore/cpu.h
target/unicore32/cpu.h target/xtensa/cpu.h; bsd-user/main.c and
net/tap-bsd.c fixed up]
2019-06-12 13:20:20 +02:00
Markus Armbruster 0b8fa32f55 Include qemu/module.h where needed, drop it from qemu-common.h
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190523143508.25387-4-armbru@redhat.com>
[Rebased with conflicts resolved automatically, except for
hw/usb/dev-hub.c hw/misc/exynos4210_rng.c hw/misc/bcm2835_rng.c
hw/misc/aspeed_scu.c hw/display/virtio-vga.c hw/arm/stm32f205_soc.c;
ui/cocoa.m fixed up]
2019-06-12 13:18:33 +02:00
Gerd Hoffmann a6c9d5da08 vfio/display: set dmabuf modifier field
Fill the new QemuDmaBuf->modifier field properly from plane info.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Acked-by: Alex Williamson <alex.williamson@redhat.com>
Message-id: 20190529072144.26737-3-kraxel@redhat.com
2019-06-07 11:52:35 +02:00
Philippe Mathieu-Daudé a2596aee6c hw/vfio/pci: Use the QOM DEVICE() macro to access DeviceState.qdev
Rather than looking inside the definition of a DeviceState with
"s->qdev", use the QOM prefered style: "DEVICE(s)".

This patch was generated using the following Coccinelle script:

    // Use DEVICE() macros to access DeviceState.qdev
    @use_device_macro_to_access_qdev@
    expression obj;
    identifier dev;
    @@
    -&obj->dev.qdev
    +DEVICE(obj)

Suggested-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Acked-by: Alex Williamson <alex.williamson@redhat.com>
Message-Id: <20190528164020.32250-10-philmd@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2019-06-06 11:35:21 +02:00
Hou Qiming f79081b4b7 hw/display/ramfb: initialize fw-config space with xres/ yres
If xres / yres were specified in QEMU command line, write them as an initial
resolution to the fw-config space on guest reset, which a later BIOS / OVMF
patch can take advantage of.

Signed-off-by: HOU Qiming <hqm03ster@gmail.com>
Signed-off-by: Marcel Apfelbaum <marcel.apfelbaum@gmail.com>
Message-id: 20190513115731.17588-4-marcel.apfelbaum@gmail.com
[fixed malformed patch]
Signed-off-by: Marcel Apfelbaum <marcel.apfelbaum@gmail.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2019-05-24 09:10:29 +02:00
Li Qiang 2d9574bdbe pci: msix: move 'MSIX_CAP_LENGTH' to header file
'MSIX_CAP_LENGTH' is defined in two .c file. Move it
to hw/pci/msix.h file to reduce duplicated code.

CC: qemu-trivial@nongnu.org
Signed-off-by: Li Qiang <liq3ea@163.com>
Message-Id: <20190521151543.92274-5-liq3ea@163.com>
Acked-by: Alex Williamson <alex.williamson@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2019-05-22 17:35:27 +02:00
Li Qiang bf04ef354c vfio: platform: fix a typo
'eventd' should be 'eventfd'.

CC: qemu-trivial@nongnu.org
Signed-off-by: Li Qiang <liq3ea@163.com>
Message-Id: <20190521151543.92274-4-liq3ea@163.com>
Acked-by: Alex Williamson <alex.williamson@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2019-05-22 17:35:27 +02:00
Li Qiang da56e33006 hw: vfio: drop TYPE_FOO MACRO in VMStateDescription
It's recommended that VMStateDescription names are decoupled from QOM
type names as the latter may freely change without consideration of
migration compatibility.

Link: https://lists.gnu.org/archive/html/qemu-devel/2018-10/msg02175.html

CC: qemu-trivial@nongnu.org
Signed-off-by: Li Qiang <liq3ea@163.com>
Message-Id: <20190521151543.92274-3-liq3ea@163.com>
Acked-by: Alex Williamson <alex.williamson@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2019-05-22 17:35:27 +02:00
Li Qiang 0c0c8f8aaf vfio: pci: make "vfio-pci-nohotplug" as MACRO
The QOMConventions recommends we should use TYPE_FOO
for a TypeInfo's name. Though "vfio-pci-nohotplug" is not
used in other parts, for consistency we should make this change.

CC: qemu-trivial@nongnu.org
Signed-off-by: Li Qiang <liq3ea@163.com>
Message-Id: <20190521151543.92274-2-liq3ea@163.com>
Acked-by: Alex Williamson <alex.williamson@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2019-05-22 17:35:27 +02:00
Peter Maydell 9ec34ecc97 ppc patch queue 2019-04-26
Here's the first ppc target pull request for qemu-4.1.  This has a
 number of things that have accumulated while qemu-4.0 was frozen.
 
  * A number of emulated MMU improvements from Ben Herrenschmidt
 
  * Assorted cleanups fro Greg Kurz
 
  * A large set of mostly mechanical cleanups from me to make target/ppc
    much closer to compliant with the modern coding style
 
  * Support for passthrough of NVIDIA GPUs using NVLink2
 
 As well as some other assorted fixes.
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEEdfRlhq5hpmzETofcbDjKyiDZs5IFAlzCnusACgkQbDjKyiDZ
 s5LfhhAAuem5UBGKPKPj33c87HC+GGG+S4y89ic3ebyKplWulGgouHCa4Dnc7Y5m
 9MfIEcljRDpuRJCEONo6yg9aaRb3cW2Go9TpTwxmF8o1suG/v5bIQIdiRbBuMa2t
 yhNujVg5kkWSU1G4mCZjL9FS2ADPsxsKZVd73DPEqjlNJg981+2qtSnfR8SXhfnk
 dSSKxyfC6Hq1+uhGkLI+xtft+BCTWOstjz+efHpZ5l2mbiaMeh7zMKrIXXy/FtKA
 ufIyxbZznMS5MAZk7t90YldznfwOCqfh3di1kx8GTZ40LkBKbuI5LLHTG0sT75z5
 LHwFuLkBgWmS8RyIRRh9opr7ifrayHx8bQFpW368Qu+PbPzUCcTVIrWUfPmaNR74
 CkYJvhiYZfTwKtUeP7b2wUkHpZF4KINI4TKNaS4QAlm3DNbO67DFYkBrytpXsSzv
 smEpe+sqlbY40olw9q4ESP80r+kGdEPLkRjfdj0R7qS4fsqAH1bjuSkNqlPaCTJQ
 hNsoz2D+f56z0bBq4x8FRzDpqnBkdy4x6PlLxkJuAaV7WAtvq7n7tiMA3TRr/rIB
 OYFP2xPNajjP8MfyOB94+S4WDltmsgXoM7HyyvrKp2JBpe7mFjpep5fMp5GUpweV
 OOYrTsN1Nuu3kFpeimEc+IOyp1BWXnJF4vHhKTOqHeqZEs5Fgus=
 =RpAK
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/dgibson/tags/ppc-for-4.1-20190426' into staging

ppc patch queue 2019-04-26

Here's the first ppc target pull request for qemu-4.1.  This has a
number of things that have accumulated while qemu-4.0 was frozen.

 * A number of emulated MMU improvements from Ben Herrenschmidt

 * Assorted cleanups fro Greg Kurz

 * A large set of mostly mechanical cleanups from me to make target/ppc
   much closer to compliant with the modern coding style

 * Support for passthrough of NVIDIA GPUs using NVLink2

As well as some other assorted fixes.

# gpg: Signature made Fri 26 Apr 2019 07:02:19 BST
# gpg:                using RSA key 75F46586AE61A66CC44E87DC6C38CACA20D9B392
# gpg: Good signature from "David Gibson <david@gibson.dropbear.id.au>" [full]
# gpg:                 aka "David Gibson (Red Hat) <dgibson@redhat.com>" [full]
# gpg:                 aka "David Gibson (ozlabs.org) <dgibson@ozlabs.org>" [full]
# gpg:                 aka "David Gibson (kernel.org) <dwg@kernel.org>" [unknown]
# Primary key fingerprint: 75F4 6586 AE61 A66C C44E  87DC 6C38 CACA 20D9 B392

* remotes/dgibson/tags/ppc-for-4.1-20190426: (36 commits)
  target/ppc: improve performance of large BAT invalidations
  ppc/hash32: Rework R and C bit updates
  ppc/hash64: Rework R and C bit updates
  ppc/spapr: Use proper HPTE accessors for H_READ
  target/ppc: Don't check UPRT in radix mode when in HV real mode
  target/ppc/kvm: Convert DPRINTF to traces
  target/ppc/trace-events: Fix trivial typo
  spapr: Drop duplicate PCI swizzle code
  spapr_pci: Get rid of duplicate code for node name creation
  target/ppc: Style fixes for translate/spe-impl.inc.c
  target/ppc: Style fixes for translate/vmx-impl.inc.c
  target/ppc: Style fixes for translate/vsx-impl.inc.c
  target/ppc: Style fixes for translate/fp-impl.inc.c
  target/ppc: Style fixes for translate.c
  target/ppc: Style fixes for translate_init.inc.c
  target/ppc: Style fixes for monitor.c
  target/ppc: Style fixes for mmu_helper.c
  target/ppc: Style fixes for mmu-hash64.[ch]
  target/ppc: Style fixes for mmu-hash32.[ch]
  target/ppc: Style fixes for misc_helper.c
  ...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-04-27 21:34:46 +01:00
Alexey Kardashevskiy ec132efaa8 spapr: Support NVIDIA V100 GPU with NVLink2
NVIDIA V100 GPUs have on-board RAM which is mapped into the host memory
space and accessible as normal RAM via an NVLink bus. The VFIO-PCI driver
implements special regions for such GPUs and emulates an NVLink bridge.
NVLink2-enabled POWER9 CPUs also provide address translation services
which includes an ATS shootdown (ATSD) register exported via the NVLink
bridge device.

This adds a quirk to VFIO to map the GPU memory and create an MR;
the new MR is stored in a PCI device as a QOM link. The sPAPR PCI uses
this to get the MR and map it to the system address space.
Another quirk does the same for ATSD.

This adds additional steps to sPAPR PHB setup:

1. Search for specific GPUs and NPUs, collect findings in
sPAPRPHBState::nvgpus, manage system address space mappings;

2. Add device-specific properties such as "ibm,npu", "ibm,gpu",
"memory-block", "link-speed" to advertise the NVLink2 function to
the guest;

3. Add "mmio-atsd" to vPHB to advertise the ATSD capability;

4. Add new memory blocks (with extra "linux,memory-usable" to prevent
the guest OS from accessing the new memory until it is onlined) and
npuphb# nodes representing an NPU unit for every vPHB as the GPU driver
uses it for link discovery.

This allocates space for GPU RAM and ATSD like we do for MMIOs by
adding 2 new parameters to the phb_placement() hook. Older machine types
set these to zero.

This puts new memory nodes in a separate NUMA node to as the GPU RAM
needs to be configured equally distant from any other node in the system.
Unlike the host setup which assigns numa ids from 255 downwards, this
adds new NUMA nodes after the user configures nodes or from 1 if none
were configured.

This adds requirement similar to EEH - one IOMMU group per vPHB.
The reason for this is that ATSD registers belong to a physical NPU
so they cannot invalidate translations on GPUs attached to another NPU.
It is guaranteed by the host platform as it does not mix NVLink bridges
or GPUs from different NPU in the same IOMMU group. If more than one
IOMMU group is detected on a vPHB, this disables ATSD support for that
vPHB and prints a warning.

Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
[aw: for vfio portions]
Acked-by: Alex Williamson <alex.williamson@redhat.com>
Message-Id: <20190312082103.130561-1-aik@ozlabs.ru>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-04-26 10:41:23 +10:00
Cornelia Huck 41c3d4269b Support for booting from a vfio-ccw passthrough dasd device
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.22 (GNU/Linux)
 
 iQIcBAABAgAGBQJcsHOvAAoJEC7Z13T+cC21IgoP/37yKOLOuagT4an9L573qWPp
 xCS48CJ4rNkpWXP3SHuTe+UHSp20sk+5b6rgM/VkLT2d301WS4gxF/VVu85ZFxGX
 tkqDwnljb87MqwTbH5Yj/U4mmq8tZkNg4CqmWuvJhWv4aFe6T/YtAzUkl7y7YCcT
 QfKqErl363JJKkL7cz+QWopFn5Gl/hy+mvEhbEtexWLIV1UNZ1i2hPWURfkh8FWH
 C1047CAfnC/rEJy0GcwkH4iCem8n4LWkMuf3Zehq+Yx+f2e8FfxMkoOtLJVCoKWj
 qoMidAplGqUxLoamZsbU1wEzwH6YH28X+uNUULsgDIIBuyW35ymbGsGTmKmNm6ED
 zVM1K7badvLeO3PXBxUkviZk7UFjxjXz3xCQMheY47wPoslfX+EN0xUvQ2gW2MvO
 Dhb9oPWsr/PFrMMJ35D2OOFH5kJC8Sj30YiP5lsnRoUBi4ecHCIUSlw6esKuYI+H
 JfDAYzxe6QqoGg5cxSNUXP+vAgU/FQq+nGNGHzHnsIR4Udt/JsAtNwxQ9DCbYR0C
 LA5qxZZTqkDtLPAHynqOzd8m7AoNaBSAgP2qp7Yp8ItXMyemlW2OIYR7yRxuL5bH
 zWO/deGYHp3+j9/Z0quzSUL5G85m0o1xgRJcJe9T2fYjWgsy271WFqaZg1JEvpI6
 zHcXEw71B7WQuAFaFO1+
 =tJvv
 -----END PGP SIGNATURE-----

Merge tag 's390-ccw-bios-2019-04-12' into s390-next-staging

Support for booting from a vfio-ccw passthrough dasd device

# gpg: Signature made Fri 12 Apr 2019 01:17:03 PM CEST
# gpg:                using RSA key 2ED9D774FE702DB5
# gpg: Good signature from "Thomas Huth <th.huth@gmx.de>" [full]
# gpg:                 aka "Thomas Huth <thuth@redhat.com>" [undefined]
# gpg:                 aka "Thomas Huth <huth@tuxfamily.org>" [undefined]
# gpg:                 aka "Thomas Huth <th.huth@posteo.de>" [unknown]

* tag 's390-ccw-bios-2019-04-12':
  pc-bios/s390: Update firmware images
  s390-bios: Use control unit type to find bootable devices
  s390-bios: Support booting from real dasd device
  s390-bios: Add channel command codes/structs needed for dasd-ipl
  s390-bios: Use control unit type to determine boot method
  s390-bios: Refactor virtio to run channel programs via cio
  s390-bios: Factor finding boot device out of virtio code path
  s390-bios: Extend find_dev() for non-virtio devices
  s390-bios: cio error handling
  s390-bios: Support for running format-0/1 channel programs
  s390-bios: ptr2u32 and u32toptr
  s390-bios: Map low core memory
  s390-bios: Decouple channel i/o logic from virtio
  s390-bios: Clean up cio.h
  s390-bios: decouple common boot logic from virtio
  s390-bios: decouple cio setup from virtio
  s390 vfio-ccw: Add bootindex property and IPLB data

Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2019-04-25 14:09:20 +02:00
David Hildenbrand 905b7ee4d6 exec: Introduce qemu_maxrampagesize() and rename qemu_getrampagesize()
Rename qemu_getrampagesize() to qemu_minrampagesize(). While at it,
properly rename find_max_supported_pagesize() to
find_min_backend_pagesize().

s390x is actually interested into the maximum ram pagesize, so
introduce and use qemu_maxrampagesize().

Add a TODO, indicating that looking at any mapped memory backends is not
100% correct in some cases.

Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20190417113143.5551-3-david@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2019-04-25 13:47:27 +02:00
Markus Armbruster 8f8f588565 vfio: Report warnings with warn_report(), not error_printf()
Cc: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190417190641.26814-8-armbru@redhat.com>
Acked-by: Alex Williamson <alex.williamson@redhat.com>
2019-04-18 22:18:59 +02:00
Jason J. Herne 44445d8668 s390 vfio-ccw: Add bootindex property and IPLB data
Add bootindex property and iplb data for vfio-ccw devices. This allows us to
forward boot information into the bios for vfio-ccw devices.

Refactor s390_get_ccw_device() to return device type. This prevents us from
having to use messy casting logic in several places.

Signed-off-by: Jason J. Herne <jjherne@linux.ibm.com>
Acked-by: Halil Pasic <pasic@linux.vnet.ibm.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <1554388475-18329-2-git-send-email-jjherne@linux.ibm.com>
[thuth: fixed "typedef struct VFIOCCWDevice" build failure with clang]
Signed-off-by: Thomas Huth <thuth@redhat.com>
2019-04-12 12:39:52 +02:00
Daniel P. Berrangé e1d0b37261 hw/vfio/ccw: avoid taking address members in packed structs
The GCC 9 compiler complains about many places in s390 code
that take the address of members of the 'struct SCHIB' which
is marked packed:

hw/vfio/ccw.c: In function ‘vfio_ccw_io_notifier_handler’:
hw/vfio/ccw.c:133:15: warning: taking address of packed member of ‘struct SCHIB’ may result in an unaligned pointer value \
[-Waddress-of-packed-member]
  133 |     SCSW *s = &sch->curr_status.scsw;
      |               ^~~~~~~~~~~~~~~~~~~~~~
hw/vfio/ccw.c:134:15: warning: taking address of packed member of ‘struct SCHIB’ may result in an unaligned pointer value \
[-Waddress-of-packed-member]
  134 |     PMCW *p = &sch->curr_status.pmcw;
      |               ^~~~~~~~~~~~~~~~~~~~~~

...snip many more...

Almost all of these are just done for convenience to avoid
typing out long variable/field names when referencing struct
members. We can get most of this convenience by taking the
address of the 'struct SCHIB' instead, avoiding triggering
the compiler warnings.

In a couple of places we copy via a local variable which is
a technique already applied elsewhere in s390 code for this
problem.

Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20190329111104.17223-12-berrange@redhat.com>
Reviewed-by: Eric Farman <farman@linux.ibm.com>
Reviewed-by: Halil Pasic <pasic@linux.ibm.com>
Reviewed-by: Farhan Ali <alifm@linux.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2019-04-03 11:19:57 +02:00
Markus Armbruster dec9776049 trace-events: Fix attribution of trace points to source
Some trace points are attributed to the wrong source file.  Happens
when we neglect to update trace-events for code motion, or add events
in the wrong place, or misspell the file name.

Clean up with help of cleanup-trace-events.pl.  Same funnies as in the
previous commit, of course.  Manually shorten its change to
linux-user/trace-events to */signal.c.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-id: 20190314180929.27722-6-armbru@redhat.com
Message-Id: <20190314180929.27722-6-armbru@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2019-03-22 16:18:07 +00:00
Markus Armbruster a9779a3ab0 trace-events: Delete unused trace points
Tracked down with cleanup-trace-events.pl.  Funnies requiring manual
post-processing:

* block.c and blockdev.c trace points are in block/trace-events.

* hw/block/nvme.c uses the preprocessor to hide its trace point use
  from cleanup-trace-events.pl.

* include/hw/xen/xen_common.h trace points are in hw/xen/trace-events.

* net/colo-compare and net/filter-rewriter.c use pseudo trace points
  colo_compare_udp_miscompare and colo_filter_rewriter_debug to guard
  debug code.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-id: 20190314180929.27722-5-armbru@redhat.com
Message-Id: <20190314180929.27722-5-armbru@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2019-03-22 16:18:07 +00:00
Markus Armbruster 500016e5db trace-events: Shorten file names in comments
We spell out sub/dir/ in sub/dir/trace-events' comments pointing to
source files.  That's because when trace-events got split up, the
comments were moved verbatim.

Delete the sub/dir/ part from these comments.  Gets rid of several
misspellings.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20190314180929.27722-3-armbru@redhat.com
Message-Id: <20190314180929.27722-3-armbru@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2019-03-22 16:18:07 +00:00
Peter Maydell 46316f1dff VFIO updates 2019-03-11
- Resolution support for mdev displays supporting EDID interface
    (Gerd Hoffmann)
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.14 (GNU/Linux)
 
 iQIcBAABAgAGBQJchrRTAAoJECObm247sIsiQwMQAIENkbd41VAcUFkoSLfloebP
 FppvUoCdWKkVLaOeEltlOGJyxh6Ixirv+iUTw3+5kNPyZyXdOaFp0pOr/SCD9p1x
 l2kYUazxCJM495py15o646X/ZKeUHKNU01X+7ZcQqQXwYqnNBVDVClAYw+kNJ2aL
 2QJ2KkaHu/JJJTQqWgOBcAVI10CeaBoTaZT65gmPELSUS3NsjSSjErJiQREzHoyP
 J0LsYuk1UVF80FP7ZNo2kS1UPmDEyQPISaDcgngvxjeR9KWE6TuHcsI9xJz4k4sm
 S/QxAlYWdXYX/I5pC0UlBEvaJxSsXSf4gr+AGYm4ebnptONT5/m82pc6YMitHr1C
 XDkbXkxv2n9q2NG9kbDvUdjlDt99W81XxTOpp/LkrGjrI7RkwowIHVSDNFYzmNFV
 Pma1Q93q1Zr6HiAm7817bEFltO9RjAMmiFCvgAyWWSwCwWI1I19BfCSJ/8aGhrwR
 GIIW+cTHZYXH70os354XrpYsW8sZNFbjtfhOUt5b5H4l341FR9+w6nmB/BJDz5U5
 ijm6ABWnT6UYx2n4lpwO0vuBtOMplL7tkxHI8+iiX4HeKGvhmaxLiNaeIFC5w65J
 MvdlTBMFKJgxXqfKDTlHkxkLoF7vjOUr7vflcSCny53RSUUztajpBy0ByRWIeTPH
 PvmnGbV+Y3EGhRSjpFwU
 =5V6/
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/awilliam/tags/vfio-updates-20190311.0' into staging

VFIO updates 2019-03-11

 - Resolution support for mdev displays supporting EDID interface
   (Gerd Hoffmann)

# gpg: Signature made Mon 11 Mar 2019 19:17:39 GMT
# gpg:                using RSA key 239B9B6E3BB08B22
# gpg: Good signature from "Alex Williamson <alex.williamson@redhat.com>" [full]
# gpg:                 aka "Alex Williamson <alex@shazbot.org>" [full]
# gpg:                 aka "Alex Williamson <alwillia@redhat.com>" [full]
# gpg:                 aka "Alex Williamson <alex.l.williamson@gmail.com>" [full]
# Primary key fingerprint: 42F6 C04E 540B D1A9 9E7B  8A90 239B 9B6E 3BB0 8B22

* remotes/awilliam/tags/vfio-updates-20190311.0:
  vfio/display: delay link up event
  vfio/display: add xres + yres properties
  vfio/display: add edid support.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-03-12 13:37:29 +00:00
Alexey Kardashevskiy 013002f0fb vfio: Make vfio_get_region_info_cap public
This makes vfio_get_region_info_cap() to be used in quirks.

Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Acked-by: Alex Williamson <alex.williamson@redhat.com>
Message-Id: <20190307050518.64968-3-aik@ozlabs.ru>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-03-12 16:17:35 +11:00
Alexey Kardashevskiy 3cdd801b0b vfio/spapr: Rename local systempagesize variable
The "systempagesize" name suggests that it is the host system page size
while it is the smallest page size of memory backing the guest RAM so
let's rename it to stop confusion. This should cause no behavioral change.

Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Message-Id: <20190227085149.38596-4-aik@ozlabs.ru>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-03-12 10:50:59 +11:00
Alexey Kardashevskiy 1610799876 vfio/spapr: Fix indirect levels calculation
The current code assumes that we can address more bits on a PCI bus
for DMA than we really can but there is no way knowing the actual limit.

This makes a better guess for the number of levels and if the kernel
fails to allocate that, this increases the level numbers till succeeded
or reached the 64bit limit.

This adds levels to the trace point.

This may cause the kernel to warn about failed allocation:
   [65122.837458] Failed to allocate a TCE memory, level shift=28
which might happen if MAX_ORDER is not large enough as it can vary:
https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/arch/powerpc/Kconfig?h=v5.0-rc2#n727

Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Message-Id: <20190227085149.38596-3-aik@ozlabs.ru>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-03-12 10:50:59 +11:00
Gerd Hoffmann 8781c70144 vfio/display: delay link up event
Kick the display link up event with a 0.1 sec delay,
so the guest has a chance to notice the link down first.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Liam Merwick <liam.merwick@oracle.com>
[update for redefined macro]
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2019-03-11 12:59:59 -06:00
Gerd Hoffmann c62a0c7ce3 vfio/display: add xres + yres properties
This allows configure the display resolution which the vgpu should use.
The information will be passed to the guest using EDID, so the mdev
driver must support the vfio edid region for this to work.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Liam Merwick <liam.merwick@oracle.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2019-03-11 12:59:59 -06:00
Gerd Hoffmann 08479114b0 vfio/display: add edid support.
This patch adds EDID support to the vfio display (aka vgpu) code.
When supported by the mdev driver qemu will generate a EDID blob
and pass it on using the new vfio edid region.  The EDID blob will
be updated on UI changes (i.e. window resize), so the guest can
adapt.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Liam Merwick <liam.merwick@oracle.com>
[remove control flow via macro, use unsigned format specifier]
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2019-03-11 12:59:59 -06:00
Paolo Bonzini 97575f928f vfio-pci: enable by default
CONFIG_VFIO_PCI was not "default y" - and once you do that, it is also
important to disable it if PCI is not there.

Reported-by: Alex Williamson <alex.williamson@redhat.com>
Tested-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-03-11 14:45:10 +01:00
Paolo Bonzini 2ac041c2c3 vfio: express vfio dependencies with Kconfig
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-03-07 21:45:53 +01:00
Paolo Bonzini e0e312f352 build: switch to Kconfig
The make_device_config.sh script is replaced by minikconf, which
is modified to support the same command line as its predecessor.

The roots of the parsing are default-configs/*.mak, Kconfig.host and
hw/Kconfig.  One difference with make_device_config.sh is that all symbols
have to be defined in a Kconfig file, including those coming from the
configure script.  This is the reason for the Kconfig.host file introduced
in the previous patch. Whenever a file in default-configs/*.mak used
$(...) to refer to a config-host.mak symbol, this is replaced by a
Kconfig dependency; this part must be done already in this patch
for bisectability.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Yang Zhong <yang.zhong@intel.com>
Acked-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20190123065618.3520-28-yang.zhong@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-03-07 21:45:53 +01:00
Paolo Bonzini 82f5181777 kconfig: introduce kconfig files
The Kconfig files were generated mostly with this script:

  for i in `grep -ho CONFIG_[A-Z0-9_]* default-configs/* | sort -u`; do
    set fnord `git grep -lw $i -- 'hw/*/Makefile.objs' `
    shift
    if test $# = 1; then
      cat >> $(dirname $1)/Kconfig << EOF
config ${i#CONFIG_}
    bool

EOF
      git add $(dirname $1)/Kconfig
    else
      echo $i $*
    fi
  done
  sed -i '$d' hw/*/Kconfig
  for i in hw/*; do
    if test -d $i && ! test -f $i/Kconfig; then
      touch $i/Kconfig
      git add $i/Kconfig
    fi
  done

Whenever a symbol is referenced from multiple subdirectories, the
script prints the list of directories that reference the symbol.
These symbols have to be added manually to the Kconfig files.

Kconfig.host and hw/Kconfig were created manually.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Yang Zhong <yang.zhong@intel.com>
Message-Id: <20190123065618.3520-27-yang.zhong@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-03-07 21:45:53 +01:00
Peter Maydell 1ba530a4ec s390x updates:
- tcg: support the floating-point extension facility
 - vfio-ap: support hot(un)plug of vfio-ap device
 - fixes + cleanups
 -----BEGIN PGP SIGNATURE-----
 
 iQJGBAABCAAwFiEEw9DWbcNiT/aowBjO3s9rk8bwL68FAlx9EjsSHGNvaHVja0By
 ZWRoYXQuY29tAAoJEN7Pa5PG8C+vS1EP/2breENmZ8XymtsXtIWwli4WUIidOdvf
 KKXt7sCmWwPr19JhLjtLVfdETT9EVFKmA30pNxB4EzVkD1KCFYMYK8jvTj6FDFd/
 pYXqQGZopwQqr+jhTWtdmSoc15+jkyCD4Gg9+jlLB7XvfY6g1TTttYxT8RxonGd9
 o8Xy4ODY++sEVA1Y9B6QFc9ePbzDpN6jWHJht6ZHGeJUmLexwanKC6LixSQkqhsG
 B6+J+j6NUO3HLvHvIvNpVDQEgFYeCBzhpVF0Atl0O4MmFH7Jke9/iI3b6dX5iGtb
 cWmCffuu91dBjJFitDABS7n3gNRYV/cFAz64y4Zm6KBz2h/xy7lzHQDtdPw4AWOa
 OeiFoWPPXFy8ClbQJvdMNzxgMK5GjejfudAxZ2lMWY+x8ThKnL/g3xv/hlWEEFpq
 tnGbHALKA2qGBlv+6M5q/nk0ZpNdMt7wFzhkbGZeeUepgsyd0JRJIuaFqLaSxawl
 p6pQ4XAsBKH2Q0ZgOak2atZV2coyFqXNPFo3HDfFGP82G9K6sRMFAbNSHJeoSjfE
 4ArNBFxXcs5OTauprw+wqgUhOB8DPtnlQIsqfxuYEP6X0Ayu1BOfrUpEEO/8Mbsh
 j6MxXinpo5NqC5v1vJZsypF7Jr/Rft5lHV30WXGovmUPhPVMQ9aIw+uSdL96CHec
 JK4EuqHMJrij
 =iS1q
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/cohuck/tags/s390x-20190304' into staging

s390x updates:
- tcg: support the floating-point extension facility
- vfio-ap: support hot(un)plug of vfio-ap device
- fixes + cleanups

# gpg: Signature made Mon 04 Mar 2019 11:55:39 GMT
# gpg:                using RSA key C3D0D66DC3624FF6A8C018CEDECF6B93C6F02FAF
# gpg:                issuer "cohuck@redhat.com"
# gpg: Good signature from "Cornelia Huck <conny@cornelia-huck.de>" [unknown]
# gpg:                 aka "Cornelia Huck <huckc@linux.vnet.ibm.com>" [full]
# gpg:                 aka "Cornelia Huck <cornelia.huck@de.ibm.com>" [full]
# gpg:                 aka "Cornelia Huck <cohuck@kernel.org>" [unknown]
# gpg:                 aka "Cornelia Huck <cohuck@redhat.com>" [unknown]
# Primary key fingerprint: C3D0 D66D C362 4FF6 A8C0  18CE DECF 6B93 C6F0 2FAF

* remotes/cohuck/tags/s390x-20190304: (27 commits)
  s390x: Add floating-point extension facility to "qemu" cpu model
  s390x/tcg: Handle all rounding modes overwritten by BFP instructions
  s390x/tcg: Implement rounding mode and XxC for LOAD ROUNDED
  s390x/tcg: Implement XxC and checks for most FP instructions
  s390x/tcg: Prepare for IEEE-inexact-exception control (XxC)
  s390x/tcg: Refactor saving/restoring the bfp rounding mode
  s390x/tcg: Check for exceptions in SET BFP ROUNDING MODE
  s390x/tcg: Handle SET FPC AND LOAD FPC 3-bit BFP rounding modes
  s390x/tcg: Fix simulated-IEEE exceptions
  s390x/tcg: Refactor SET FPC AND SIGNAL handling
  s390x/tcg: Hide IEEE underflows in some scenarios
  s390x/tcg: Fix parts of IEEE exception handling
  s390x/tcg: Factor out conversion of softfloat exceptions
  s390x/tcg: Fix rounding from float128 to uint64_t/uint32_t
  s390x/tcg: Fix TEST DATA CLASS instructions
  s390x/tcg: Implement LOAD COUNT TO BLOCK BOUNDARY
  s390x/tcg: Implement LOAD LENGTHENED short HFP to long HFP
  s390x/tcg: Factor out gen_addi_and_wrap_i64() from get_address()
  s390x/tcg: Factor out vec_full_reg_offset()
  s390x/tcg: Clarify terminology in vec_reg_offset()
  ...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-03-04 13:38:54 +00:00
Peter Maydell 1d31f1872b pci, pc, virtio: fixes, cleanups, tests
Lots of work on tests: BiosTablesTest UEFI app,
 vhost-user testing for non-Linux hosts.
 Misc cleanups and fixes all over the place
 
 Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
 -----BEGIN PGP SIGNATURE-----
 
 iQEcBAABAgAGBQJccBqMAAoJECgfDbjSjVRpvSEIAKYPRNdCBX/SSS/L/tmJS5Zt
 8IyU/HW1YJ249vO+aT6z4Q3QPgqNC3KjXC3brx/WRoPZnRroen4rv2Kqnk6SayPa
 a52d2ubXKWxb3swdG1CAVzFRhq/ABpgAPx0dr1JW+RXgo2lxpJ4GNYxKMosQTaPE
 hRNeXl1XlcIK525kJhFH3Hlij9mTRuY6T7ydpPQd8dUq2dBRaL9RrzZRrkZxCy6l
 gQPUqNzPhG0XXyOiJmwYyVX0zGzbYrMLrMQAor2SBIYmU+zv2eZGPJUYxoMTUMzt
 YR0WCpvkvPITlAryaBoozAIDYVz8PxBRT1KRwpDal+2rzlm6o+veKDiF8R46gn0=
 =GzUz
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging

pci, pc, virtio: fixes, cleanups, tests

Lots of work on tests: BiosTablesTest UEFI app,
vhost-user testing for non-Linux hosts.
Misc cleanups and fixes all over the place

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

# gpg: Signature made Fri 22 Feb 2019 15:51:40 GMT
# gpg:                using RSA key 281F0DB8D28D5469
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" [full]
# gpg:                 aka "Michael S. Tsirkin <mst@redhat.com>" [full]
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17  0970 C350 3912 AFBE 8E67
#      Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA  8A0D 281F 0DB8 D28D 5469

* remotes/mst/tags/for_upstream: (26 commits)
  pci: Sanity test minimum downstream LNKSTA
  hw/smbios: fix offset of type 3 sku field
  pci: Move NVIDIA vendor id to the rest of ids
  virtio-balloon: Safely handle BALLOON_PAGE_SIZE < host page size
  virtio-balloon: Use ram_block_discard_range() instead of raw madvise()
  virtio-balloon: Rework ballon_page() interface
  virtio-balloon: Corrections to address verification
  virtio-balloon: Remove unnecessary MADV_WILLNEED on deflate
  i386/kvm: ignore masked irqs when update msi routes
  contrib/vhost-user-blk: fix the compilation issue
  Revert "contrib/vhost-user-blk: fix the compilation issue"
  pc-dimm: use same mechanism for [get|set]_addr
  tests/data: introduce "uefi-boot-images" with the "bios-tables-test" ISOs
  tests/uefi-test-tools: add build scripts
  tests: introduce "uefi-test-tools" with the BiosTablesTest UEFI app
  roms: build the EfiRom utility from the roms/edk2 submodule
  roms: add the edk2 project as a git submodule
  vhost-user-test: create a temporary directory per TestServer
  vhost-user-test: small changes to init_hugepagefs
  vhost-user-test: create a main loop per TestServer
  ...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-03-04 11:04:31 +00:00
Tony Krowiak 374b78e370 s390x/vfio-ap: Implement hot plug/unplug of vfio-ap device
Introduces hot plug/unplug support for the vfio-ap device.

To hot plug a vfio-ap device using the QEMU device_add command:

	(qemu) device_add vfio-ap,sysfsdev=$path-to-mdev

	Where $path-to-mdev is the absolute path to the mediated matrix device
	to which AP resources to be used by the guest have been assigned.

A vfio-ap device can be hot plugged only if:

1. A vfio-ap device has not been attached to the virtual machine's ap-bus
   via the QEMU command line or a prior hot plug action.

2. The guest was started with the CPU model feature for AP enabled
   (e.g., -cpu host,ap=on)

To hot unplug a vfio-ap device using the QEMU device_del command:

	(qemu) device_del vfio-ap,sysfsdev=$path-to-mdev

	Where $path-to-mdev is the absolute path to the mediated matrix device
	specified when the vfio-ap device was attached to the virtual machine's
	ap-bus.

A vfio-ap device can be hot unplugged only if:

1. A vfio-ap device has been attached to the virtual machine's ap-bus
   via the QEMU command line or a prior hot plug action.

2. The guest was started with the CPU model feature for AP enabled
   (e.g., -cpu host,ap=on)

Please note that a hot plug handler is not necessary for the vfio-ap device
because the AP matrix configuration for the guest is performed by the
kernel device driver when the vfio-ap device is realized. The vfio-ap device
represents a VFIO mediated device created in the host sysfs for use by a guest.
The mdev device is configured with an AP matrix (i.e., adapters and domains) via
its sysfs attribute interfaces prior to starting the guest or plugging a vfio-ap
device in. When the device is realized, a file descriptor is opened on the mdev
device which results in a callback to the vfio_ap kernel device driver. The
device driver then configures the AP matrix in the guest's SIE state description
from the AP matrix assigned via the mdev device's sysfs interfaces. The AP
devices will be created for the guest when the AP bus running on the guest
subsequently performs its periodic scan for AP devices.

The qdev_simple_device_unplug_cb() callback function is used for the same
reaons; namely, the vfio_ap kernel device driver will perform the AP resource
de-configuration for the guest when the vfio-ap device is unplugged. When the
vfio-ap device is unrealized, the mdev device file descriptor is closed which
results in a callback to the vfio_ap kernel device driver. The device driver
then clears the AP matrix configuration in the guest's SIE state description
and resets all of the affected queues. The AP devices created for the guest
will be removed when the AP bus running on the guest subsequently performs
its periodic scan and finds there are no longer any AP resources assigned to the
guest.

Signed-off-by: Tony Krowiak <akrowiak@linux.ibm.com>
Reviewed-by: Pierre Morel <pmorel@linux.ibm.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Halil Pasic <pasic@linux.ibm.com>
Tested-by: Pierre Morel <pmorel@linux.ibm.com>
Message-Id: <1550519397-25359-2-git-send-email-akrowiak@linux.ibm.com>
[CH: adapt to changed qbus_set_hotplug_handler() signature]
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2019-03-04 11:49:31 +01:00
Alexey Kardashevskiy ee1cd0099a pci: Move NVIDIA vendor id to the rest of ids
sPAPR code will use it too so move it from VFIO to the common code.

Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20190214051440.59167-1-aik@ozlabs.ru>
Acked-by: Alex Williamson <alex.williamson@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2019-02-22 10:51:31 -05:00
Eric Auger 2b6326c0bf hw/vfio/common: Refactor container initialization
We introduce the vfio_init_container_type() helper.
It computes the highest usable iommu type and then
set the container and the iommu type.

Its usage in vfio_connect_container() makes the code
ready for addition of new iommu types.

Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2019-02-21 21:07:03 -07:00
Alex Williamson 567d7d3e6b vfio/common: Work around kernel overflow bug in DMA unmap
A kernel bug was introduced in v4.15 via commit 71a7d3d78e3c which
adds a test for address space wrap-around in the vfio DMA unmap path.
Unfortunately due to overflow, the kernel detects an unmap of the last
page in the 64-bit address space as a wrap-around.  In QEMU, a Q35
guest with VT-d emulation and guest IOMMU enabled will attempt to make
such an unmap request during VM system reset, triggering an error:

  qemu-kvm: VFIO_UNMAP_DMA: -22
  qemu-kvm: vfio_dma_unmap(0x561f059948f0, 0xfef00000, 0xffffffff01100000) = -22 (Invalid argument)

Here the IOVA start address (0xfef00000) and the size parameter
(0xffffffff01100000) add to exactly 2^64, triggering the bug.  A
kernel fix is queued for the Linux v5.0 release to address this.

This patch implements a workaround to retry the unmap, excluding the
final page of the range when we detect an unmap failing which matches
the requirements for this issue.  This is expected to be a safe and
complete workaround as the VT-d address space does not extend to the
full 64-bit space and therefore the last page should never be mapped.

This workaround can be removed once all kernels with this bug are
sufficiently deprecated.

Link: https://bugzilla.redhat.com/show_bug.cgi?id=1662291
Reported-by: Pei Zhang <pezhang@redhat.com>
Debugged-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2019-02-21 21:07:03 -07:00
Paolo Bonzini f5ce0a5f5a hw/vfio/Makefile.objs: Create new CONFIG_* variables for VFIO core and PCI
Make hw/vfio configurable and add new CONFIG_VFIO_* to the
default-configs/s390x*-softmmu.mak.  This allow a finer-grain
selection of the various VFIO backends.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20190202072456.6468-28-yang.zhong@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-02-05 16:50:21 +01:00
Paolo Bonzini e01ee04f8b vfio: move conditional up to hw/Makefile.objs
Instead of wrapping the entire Makefile.objs with an ifeq/endif, just
include the directory only for Linux.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20190202072456.6468-4-yang.zhong@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-02-05 16:50:19 +01:00
Daniel P. Berrangé 772f1b3721 trace: forbid use of %m in trace event format strings
The '%m' format instructs glibc's printf()/syslog() implementation to
insert the contents of strerror(errno). Since this is a glibc extension
it should generally be avoided in QEMU due to need for portability to a
variety of platforms.

Even though vfio is Linux-only code that could otherwise use "%m", it
must still be avoided in trace-events files because several of the
backends do not use the format string and so this error information is
invisible to them.

The errno string value should be given as an explicit trace argument
instead, making it accessible to all backends. This also allows it to
work correctly with future patches that use the format string with
systemtap's simple printf code.

Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-id: 20190123120016.4538-4-berrange@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2019-01-24 14:16:56 +00:00
Paolo Bonzini f481ee2d5e qemu/queue.h: typedef QTAILQ heads
This will be needed when we change the QTAILQ head and elem structs
to unions.  However, it is also consistent with the usage elsewhere
in QEMU for other list head structs (see for example FsMountList).

Note that most QTAILQs only need their name in order to do backwards
walks.  Those do not break with the struct->union change, and anyway
the change will also remove the need to name heads when doing backwards
walks, so those are not touched here.

Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-01-11 15:46:55 +01:00
Paolo Bonzini 10ca76b4d2 vfio: make vfio_address_spaces static
It is not used outside hw/vfio/common.c, so it does not need to
be extern.

Acked-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-01-11 15:46:54 +01:00
Peter Maydell 15763776bf pci, pc, virtio: fixes, features
VTD fixes
 IR and split irqchip are now the default for Q35
 ACPI refactoring
 hotplug refactoring
 new names for virtio devices
 multiple pcie link width/speeds
 PCI fixes
 
 Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
 -----BEGIN PGP SIGNATURE-----
 
 iQEcBAABAgAGBQJcG967AAoJECgfDbjSjVRpUlMH/1wy8WW7Br/4JxlWUPsfZTqZ
 0Lg2n59wuFzRVS+gLotp6bUaJGR9xn9fKjI1wfD59oVrDTKyauuw82v0OityEs33
 ZquFecuJvP6k5N40DkqA9YJjKSw7nUmLrsyrD0t2H43npikP2aD9f6yootrr3oVV
 nPwBvyT9ykIBQc7IzsHDiLw3EPdIf+9IR7+l+PLptzV0zK43Jfwi/nzHIQq00UMz
 eLM/ejQLIx4BZJnYGS0Cy6v3K7cS3k45LHDY0cGc0id2jHFN2vdQyHCF9I1ps72q
 pSlhMaLEwvQSYyre6iFTG5uuvyIPWv3LOkaBEwMSA5B/HXuEb2RKHThYzS9dc68=
 =OwW7
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging

pci, pc, virtio: fixes, features

VTD fixes
IR and split irqchip are now the default for Q35
ACPI refactoring
hotplug refactoring
new names for virtio devices
multiple pcie link width/speeds
PCI fixes

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

# gpg: Signature made Thu 20 Dec 2018 18:26:03 GMT
# gpg:                using RSA key 281F0DB8D28D5469
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>"
# gpg:                 aka "Michael S. Tsirkin <mst@redhat.com>"
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17  0970 C350 3912 AFBE 8E67
#      Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA  8A0D 281F 0DB8 D28D 5469

* remotes/mst/tags/for_upstream: (44 commits)
  x86-iommu: turn on IR by default if proper
  x86-iommu: switch intr_supported to OnOffAuto type
  q35: set split kernel irqchip as default
  pci: Adjust PCI config limit based on bus topology
  spapr_pci: perform unplug via the hotplug handler
  pci/shpc: perform unplug via the hotplug handler
  pci: Reuse pci-bridge hotplug handler handlers for pcie-pci-bridge
  pci/pcie: perform unplug via the hotplug handler
  pci/pcihp: perform unplug via the hotplug handler
  pci/pcihp: overwrite hotplug handler recursively from the start
  pci/pcihp: perform check for bus capability in pre_plug handler
  s390x/pci: rename hotplug handler callbacks
  pci/shpc: rename hotplug handler callbacks
  pci/pcie: rename hotplug handler callbacks
  hw/i386: Remove deprecated machines pc-0.10 and pc-0.11
  hw: acpi: Remove AcpiRsdpDescriptor and fix tests
  hw: acpi: Export and share the ARM RSDP build
  hw: arm: Support both legacy and current RSDP build
  hw: arm: Convert the RSDP build to the buid_append_foo() API
  hw: arm: Carry RSDP specific data through AcpiRsdpData
  ...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-12-21 14:06:01 +00:00
Markus Armbruster b7d89466dd Clean up includes
Clean up includes so that osdep.h is included first and headers
which it implies are not included manually.

This commit was created with scripts/clean-includes, with the changes
to the following files manually reverted:

    contrib/libvhost-user/libvhost-user-glib.h
    contrib/libvhost-user/libvhost-user.c
    contrib/libvhost-user/libvhost-user.h
    linux-user/mips64/cpu_loop.c
    linux-user/mips64/signal.c
    linux-user/sparc64/cpu_loop.c
    linux-user/sparc64/signal.c
    linux-user/x86_64/cpu_loop.c
    linux-user/x86_64/signal.c
    target/s390x/gen-features.c
    tests/migration/s390x/a-b-bios.c
    tests/test-rcu-simpleq.c
    tests/test-rcu-tailq.c

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20181204172535.2799-1-armbru@redhat.com>
Acked-by: Eduardo Habkost <ehabkost@redhat.com>
Acked-by: Halil Pasic <pasic@linux.ibm.com>
Acked-by: Yuval Shaia <yuval.shaia@oracle.com>
Acked-by: Viktor Prutyanov <viktor.prutyanov@phystech.edu>
2018-12-20 10:29:08 +01:00
Alex Williamson d26e543891 vfio/pci: Remove PCIe Link Status emulation
Now that the downstream port will virtually negotiate itself to the
link status of the downstream device, we can remove this emulation.
It's not clear that it was every terribly useful anyway.

Tested-by: Geoffrey McRae <geoff@hostfission.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2018-12-19 16:48:16 -05:00
Alex Williamson d96a0ac71c pcie: Create enums for link speed and width
In preparation for reporting higher virtual link speeds and widths,
create enums and macros to help us manage them.

Cc: Marcel Apfelbaum <marcel.apfelbaum@gmail.com>
Tested-by: Geoffrey McRae <geoff@hostfission.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2018-12-19 16:48:16 -05:00
Cornelia Huck 1883e8fc80 vfio-ap: flag as compatible with balloon
vfio-ap devices do not pin any pages in the host. Therefore, they
are compatible with memory ballooning.

Flag them as compatible, so both vfio-ap and a balloon can be
used simultaneously.

Cc: qemu-stable@nongnu.org
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Tested-by: Tony Krowiak <akrowiak@linux.ibm.com>
Reviewed-by: Halil Pasic <pasic@linux.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2018-12-12 10:39:28 +01:00
Cornelia Huck ab17b1fc75 s390x/vfio-ap: report correct error
If ioctl(..., VFIO_DEVICE_RESET) fails, we want to report errno
instead of ret (which is always -1 on error).

Fixes Coverity issue CID 1396176.

Reported-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Tony Krowiak <akrowiak@linux.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2018-11-05 09:55:01 +01:00