Raise your hand if you have a physical floppy drive in a computer
you've powered on in 2015. Okay, I see we got a few weirdos in the
audience. That's okay, weirdos are welcome here.
Kidding aside, media change detection doesn't fully work, isn't going
to be fixed, and floppy passthrough just isn't earning its keep
anymore.
Deprecate block driver host_floppy now, so we can drop it after a
grace period.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Since commit c25f53b06e ("raw: Probe
required direct I/O alignment") QEMU has failed to launch if image files
produce I/O errors.
Previously, QEMU would launch successfully and the guest would see the
errors when attempting I/O.
This is a regression and may prevent multipath I/O inside the guest,
where QEMU must launch and let the guest figure out by itself which
disks are online.
Tweak the alignment probing code in raw-posix.c to explicitly look for
EINVAL on Linux instead of bailing. The kernel refuses misaligned
requests with this error code and other error codes can be ignored.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Introduce driver methods of defining disk blocksizes (physical and
logical) and hard drive geometry.
Methods are only implemented for "host_device". For "raw" devices
driver calls child's method.
For now geometry detection will only work for DASD devices. To check
that a local check_for_dasd function was introduced. It calls BIODASDINFO2
ioctl and returns its rc.
Blocksizes detection function will probe sizes for DASD devices.
Signed-off-by: Ekaterina Tumanova <tumanova@linux.vnet.ibm.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 1424087278-49393-4-git-send-email-tumanova@linux.vnet.ibm.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Put it in new probe_logical_blocksize().
Signed-off-by: Ekaterina Tumanova <tumanova@linux.vnet.ibm.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 1424087278-49393-3-git-send-email-tumanova@linux.vnet.ibm.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
block/raw-posix.c:947:19: warning: unused variable 's' [-Wunused-variable]
BDRVRawState *s = aiocb->bs->opaque;
This variable is used only when on of the following macros are defined
CONFIG_XFS, CONFIG_FALLOCATE, CONFIG_FALLOCATE_PUNCH_HOLE or
CONFIG_FALLOCATE_ZERO_RANGE. Fortunately, CONFIG_FALLOCATE_PUNCH_HOLE
and CONFIG_FALLOCATE_ZERO_RANGE could be defined only along with
CONFIG_FALLOCATE. Therefore checking for CONFIG_XFS or CONFIG_FALLOCATE
would be enough.
Signed-off-by: Denis V. Lunev <den@openvz.org>
CC: Peter Maydell <peter.maydell@linaro.org>
CC: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Now that request clamping is done in the BlockBackend, the "growable"
field can be removed from the BlockDriverState. All BDSs are now treated
as being "growable" (that is, they are allowed to grow; they are not
necessarily actually able to).
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 1423162705-32065-16-git-send-email-mreitz@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This patch replaces the dummy code in raw_getlength() for block devices
on OS X, which always returned LLONG_MAX, with a real implementation
that returns the actual block device size.
Signed-off-by: John Arbuckle <programmingkidx@gmail.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Tested-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This sequence works efficiently if FALLOC_FL_ZERO_RANGE is not supported.
Unfortunately, FALLOC_FL_ZERO_RANGE is supported on really modern systems
and only for a couple of filesystems. FALLOC_FL_PUNCH_HOLE is much more
mature.
The sequence of 2 operations FALLOC_FL_PUNCH_HOLE and 0 is necessary due
to the following reasons:
- FALLOC_FL_PUNCH_HOLE creates a hole in the file, the file becomes
sparse. In order to retain original functionality we must allocate
disk space afterwards. This is done using fallocate(0) call
- fallocate(0) without preceeding FALLOC_FL_PUNCH_HOLE will do nothing
if called above already allocated areas of the file, i.e. the content
will not be zeroed
This should increase the performance a bit for not-so-modern kernels.
CC: Max Reitz <mreitz@redhat.com>
CC: Kevin Wolf <kwolf@redhat.com>
CC: Stefan Hajnoczi <stefanha@redhat.com>
CC: Peter Lieven <pl@kamp.de>
CC: Fam Zheng <famz@redhat.com>
Signed-off-by: Denis V. Lunev <den@openvz.org>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
There is a possibility that we are extending our image and thus writing
zeroes beyond the end of the file. In this case we do not need to care
about the hole to make sure that there is no data in the file under
this offset (pre-condition to fallocate(0) to work). We could simply call
fallocate(0).
This improves the performance of writing zeroes even on really old
platforms which do not have even FALLOC_FL_PUNCH_HOLE.
Before the patch do_fallocate was used when either
CONFIG_FALLOCATE_PUNCH_HOLE or CONFIG_FALLOCATE_ZERO_RANGE are defined.
Now the story is different. CONFIG_FALLOCATE is defined when Linux
fallocate is defined, posix_fallocate is completely different story
(CONFIG_POSIX_FALLOCATE). CONFIG_FALLOCATE is mandatory prerequite
for both CONFIG_FALLOCATE_PUNCH_HOLE and CONFIG_FALLOCATE_ZERO_RANGE
thus we are on the safe side.
CC: Max Reitz <mreitz@redhat.com>
CC: Kevin Wolf <kwolf@redhat.com>
CC: Stefan Hajnoczi <stefanha@redhat.com>
CC: Peter Lieven <pl@kamp.de>
CC: Fam Zheng <famz@redhat.com>
Signed-off-by: Denis V. Lunev <den@openvz.org>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This efficiently writes zeroes on Linux if the kernel is capable enough.
FALLOC_FL_ZERO_RANGE correctly handles all cases, including and not
including file expansion.
CC: Kevin Wolf <kwolf@redhat.com>
CC: Stefan Hajnoczi <stefanha@redhat.com>
CC: Peter Lieven <pl@kamp.de>
CC: Fam Zheng <famz@redhat.com>
Signed-off-by: Denis V. Lunev <den@openvz.org>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
move code dealing with a block device to a separate function. This will
allow to implement additional processing for ordinary files.
Please note, that xfs_code has been moved before checking for
s->has_write_zeroes as xfs_write_zeroes does not touch this flag inside.
This makes code a bit more consistent.
CC: Kevin Wolf <kwolf@redhat.com>
CC: Stefan Hajnoczi <stefanha@redhat.com>
CC: Peter Lieven <pl@kamp.de>
CC: Fam Zheng <famz@redhat.com>
Signed-off-by: Denis V. Lunev <den@openvz.org>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The pattern
do {
if (fallocate(s->fd, mode, offset, len) == 0) {
return 0;
}
} while (errno == EINTR);
ret = translate_err(-errno);
will be commonly useful in next patches. Create helper for it.
CC: Kevin Wolf <kwolf@redhat.com>
CC: Stefan Hajnoczi <stefanha@redhat.com>
CC: Peter Lieven <pl@kamp.de>
CC: Fam Zheng <famz@redhat.com>
Signed-off-by: Denis V. Lunev <den@openvz.org>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Peter Lieven <pl@kamp.de>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
actually the code
if (ret == -ENODEV || ret == -ENOSYS || ret == -EOPNOTSUPP ||
ret == -ENOTTY) {
ret = -ENOTSUP;
}
is present twice and will be added a couple more times. Create helper
for this.
CC: Kevin Wolf <kwolf@redhat.com>
CC: Stefan Hajnoczi <stefanha@redhat.com>
CC: Peter Lieven <pl@kamp.de>
CC: Fam Zheng <famz@redhat.com>
Signed-off-by: Denis V. Lunev <den@openvz.org>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Peter Lieven <pl@kamp.de>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The return value must be negative on error; there is one place in
raw_open_common() where errp is set, but ret remains 0. Fix it.
Cc: qemu-stable@nongnu.org
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
There are some block drivers which are essential to QEMU and may not be
removed: These are raw, file and qcow2 (as the default non-raw format).
Make their BlockDriver objects public so they can be directly referenced
throughout the block layer without needing to call bdrv_find_format()
and having to deal with an error at runtime, while the real problem
occurred during linking (where raw, file or qcow2 were not linked into
qemu).
Cc: qemu-stable@nongnu.org
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Use the external qemu-timer API instead.
No one else should be calling cpu_get_clock(), get_clock() and
get_clock_realtime() directly; they are internal functions and they
should be confined to qemu-timer.c and cpus.c (where the icount
implementation resides). All accesses should go through
qemu_clock_get_ns.
Cc: kwolf@redhat.com
Cc: stefanha@redhat.com
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 1417010463-3527-2-git-send-email-pbonzini@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
fsync() may fail, and that case should be handled.
Reported-by: László Érsek <lersek@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The loop which filled the file with zeroes may have been left early due
to an error. In that case, the fsync() should be skipped.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
write() may write less bytes than requested; in this case, the number of
bytes written is returned. This is the byte count we should be
subtracting from the number of bytes still to be written, and not the
byte count we requested to write.
Reported-by: László Érsek <lersek@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
On systems where SEEK_HOLE in a trailing hole seeks to EOF (Solaris,
but not Linux), try_seek_hole() reports trailing data instead.
Additionally, unlikely lseek() failures are treated badly:
* When SEEK_HOLE fails, try_seek_hole() reports trailing data. For
-ENXIO, there's in fact a trailing hole. Can happen only when
something truncated the file since we opened it.
* When SEEK_HOLE succeeds, SEEK_DATA fails, and SEEK_END succeeds,
then try_seek_hole() reports a trailing hole. This is okay only
when SEEK_DATA failed with -ENXIO (which means the non-trailing hole
found by SEEK_HOLE has since become trailing somehow). For other
failures (unlikely), it's wrong.
* When SEEK_HOLE succeeds, SEEK_DATA fails, SEEK_END fails (unlikely),
then try_seek_hole() reports bogus data [-1,start), which its caller
raw_co_get_block_status() turns into zero sectors of data. Could
theoretically lead to infinite loops in code that attempts to scan
data vs. hole forward.
Rewrite from scratch, with very careful comments.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Commit 5500316 (May 2012) implemented raw_co_is_allocated() as
follows:
1. If defined(CONFIG_FIEMAP), use the FS_IOC_FIEMAP ioctl
2. Else if defined(SEEK_HOLE) && defined(SEEK_DATA), use lseek()
3. Else pretend there are no holes
Later on, raw_co_is_allocated() was generalized to
raw_co_get_block_status().
Commit 4f11aa8 (May 2014) changed it to try the three methods in order
until success, because "there may be implementations which support
[SEEK_HOLE/SEEK_DATA] but not [FIEMAP] (e.g., NFSv4.2) as well as vice
versa."
Unfortunately, we used FIEMAP incorrectly: we lacked FIEMAP_FLAG_SYNC.
Commit 38c4d0a (Sep 2014) added it. Because that's a significant
speed hit, the next commit 7c159037 put SEEK_HOLE/SEEK_DATA first.
As you see, the obvious use of FIEMAP is wrong, and the correct use is
slow. I guess this puts it somewhere between -7 "The obvious use is
wrong" and -10 "It's impossible to get right" on Rusty Russel's Hard
to Misuse scale[*].
"Fortunately", the FIEMAP code is used only when
* SEEK_HOLE/SEEK_DATA aren't defined, but CONFIG_FIEMAP is
Uncommon. SEEK_HOLE had no XFS implementation between 2011 (when it
was introduced for ext4 and btrfs) and 2012.
* SEEK_HOLE/SEEK_DATA and CONFIG_FIEMAP are defined, but lseek() fails
Unlikely.
Thus, the FIEMAP code executes rarely. Makes it a nice hidey-hole for
bugs. Worse, bugs hiding there can theoretically bite even on a host
that has SEEK_HOLE/SEEK_DATA.
I don't want to worry about this crap, not even theoretically. Get
rid of it.
[*] http://ozlabs.org/~rusty/index.cgi/tech/2008-04-01.html
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Missed in commit 705be72.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Instead of generating the full return value thrice in try_fiemap(),
try_seek_hole() and as a fall-back in raw_co_get_block_status() itself,
generate the value only in raw_co_get_block_status().
While at it, also remove the pnum parameter from try_fiemap() and
try_seek_hole().
Suggested-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-id: 1414148280-17949-3-git-send-email-mreitz@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
As its comment states, raw_co_get_block_status() should unconditionally
return 0 and set *pnum to 0 for after EOF.
An assertion after lseek(..., SEEK_HOLE) tried to catch this case by
asserting that errno != -ENXIO (which would indicate a position after
the EOF); but it should be errno != ENXIO instead. Regardless of that,
there should be no such assertion at all. If bdrv_getlength() returned
an outdated value and the image has been resized outside of qemu,
lseek() will return with errno == ENXIO. Just return that value as an
error then.
Setting *pnum to 0 and returning 0 should not be done here, as in that
case we should update the device length as well. So, from qemu's
perspective, the file has not been resized; it's just that there was an
error querying sectors beyond a certain point (the actual file size).
Additionally, nb_sectors should be clamped against the image end. This
was probably not an issue if FIEMAP or SEEK_HOLE/SEEK_DATA worked, but
the fallback did not take this case into account.
Reported-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-id: 1414148280-17949-2-git-send-email-mreitz@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Introduce a new flag to mark devices that require requests to be aligned and
replace the usage of BDRV_O_NOCACHE and O_DIRECT with this flag when
appropriate.
If a character device is used as a backend on a FreeBSD host set this flag
unconditionally.
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Cc: Kevin Wolf <kwolf@redhat.com>
Cc: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
I'll use it with block backends shortly, and the name is going to fit
badly there. It's a block layer thing anyway, not just a block driver
thing.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
I'll use BlockDriverAIOCB with block backends shortly, and the name is
going to fit badly there. It's a block layer thing anyway, not just a
block driver thing.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
try_fiemap() uses FIEMAP_FLAG_SYNC which has a significant performance
impact.
Prefer seek_hole() over fiemap() to avoid this impact where possible.
seek_hole is more widely used and, arguably, has potential to be
optimised in the kernel.
Reported-By: Michael Steffens <michael_steffens@posteo.de>
Signed-off-by: Tony Breeds <tony@bakeyournoodle.com>
Cc: Kevin Wolf <kwolf@redhat.com>
Cc: Markus Armbruster <armbru@redhat.com>
Cc: Stefan Hajnoczi <stefanha@redhat.com>
Cc: Max Reitz <mreitz@redhat.com>
Cc: Pádraig Brady <pbrady@redhat.com>
Cc: Eric Blake <eblake@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Using fiemap without FIEMAP_FLAG_SYNC is a known corrupter.
Add the FIEMAP_FLAG_SYNC flag to the FS_IOC_FIEMAP ioctl. This has
the downside of significantly reducing performance.
Reported-By: Michael Steffens <michael_steffens@posteo.de>
Signed-off-by: Tony Breeds <tony@bakeyournoodle.com>
Cc: Kevin Wolf <kwolf@redhat.com>
Cc: Markus Armbruster <armbru@redhat.com>
Cc: Stefan Hajnoczi <stefanha@redhat.com>
Cc: Max Reitz <mreitz@redhat.com>
Cc: Pádraig Brady <pbrady@redhat.com>
Cc: Eric Blake <eblake@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Check for the presence of posix_fallocate() in configure and only
compile in support for PREALLOC_MODE_FALLOC when it's there.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This patch adds a new option preallocation for raw format, and implements
falloc and full preallocation.
Signed-off-by: Hu Tao <hutao@cn.fujitsu.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
and avoid converting it back later.
Signed-off-by: Hu Tao <hutao@cn.fujitsu.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Benoît Canet <benoit.canet@nodalink.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Currently the file size requested by user is rounded down to nearest
sector, causing the actual file size could be a bit less than the size
user requested. Since some formats (like qcow2) record virtual disk
size in bytes, this can make the last few bytes cannot be accessed.
This patch fixes it by rounding up file size to nearest sector so that
the actual file size is no less than the requested file size.
Signed-off-by: Hu Tao <hutao@cn.fujitsu.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The following O_DIRECT read from a <512 byte file fails:
$ truncate -s 320 test.img
$ qemu-io -n -c 'read -P 0 0 512' test.img
qemu-io: can't open device test.img: Could not read image for determining its format: Invalid argument
Note that qemu-io completes successfully without the -n (O_DIRECT)
option.
This patch fixes qemu-iotests ./check -nocache -vmdk 059.
Cc: qemu-stable@nongnu.org
Suggested-by: Kevin Wolf <kwolf@redhat.com>
Reported-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
g_new(T, n) is neater than g_malloc(sizeof(T) * n). It's also safer,
for two reasons. One, it catches multiplication overflowing size_t.
Two, it returns T * rather than void *, which lets the compiler catch
more type errors.
Patch created with Coccinelle, with two manual changes on top:
* Add const to bdrv_iterate_format() to keep the types straight
* Convert the allocation in bdrv_drop_intermediate(), which Coccinelle
inexplicably misses
Coccinelle semantic patch:
@@
type T;
@@
-g_malloc(sizeof(T))
+g_new(T, 1)
@@
type T;
@@
-g_try_malloc(sizeof(T))
+g_try_new(T, 1)
@@
type T;
@@
-g_malloc0(sizeof(T))
+g_new0(T, 1)
@@
type T;
@@
-g_try_malloc0(sizeof(T))
+g_try_new0(T, 1)
@@
type T;
expression n;
@@
-g_malloc(sizeof(T) * (n))
+g_new(T, n)
@@
type T;
expression n;
@@
-g_try_malloc(sizeof(T) * (n))
+g_try_new(T, n)
@@
type T;
expression n;
@@
-g_malloc0(sizeof(T) * (n))
+g_new0(T, n)
@@
type T;
expression n;
@@
-g_try_malloc0(sizeof(T) * (n))
+g_try_new0(T, n)
@@
type T;
expression p, n;
@@
-g_realloc(p, sizeof(T) * (n))
+g_renew(T, p, n)
@@
type T;
expression p, n;
@@
-g_try_realloc(p, sizeof(T) * (n))
+g_try_renew(T, p, n)
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Some code in the block layer makes potentially huge allocations. Failure
is not completely unexpected there, so avoid aborting qemu and handle
out-of-memory situations gracefully.
This patch addresses the allocations in the raw-posix block driver.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
If qemu couldn't find out what O_DIRECT alignment to use with a given
file, it would run into assert(bdrv_opt_mem_align(bs) != 0); in block.c
and confuse users. This adds a more descriptive error message for such
cases.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
At least raw-posix relies on this because it can allocate bounce buffers
based on the request length, but access it using all of the qiov entries
later.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
This patch implements .bdrv_io_plug, .bdrv_io_unplug and
.bdrv_flush_io_queue callbacks for linux-aio Block Drivers,
so that submitting I/O as a batch can be supported on linux-aio.
[Unprocessed requests are completed with -EIO instead of a bogus ret
value.
--Stefan]
Signed-off-by: Ming Lei <ming.lei@canonical.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
We got a merry mix of -1 and -errno here.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Benoit Canet <benoit@irqsave.net>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Add 'nocow' option so that users could have a chance to set NOCOW flag to
newly created files. It's useful on btrfs file system to enhance performance.
Btrfs has low performance when hosting VM images, even more when the guest
in those VM are also using btrfs as file system. One way to mitigate this bad
performance is to turn off COW attributes on VM files. Generally, there are
two ways to turn off NOCOW on btrfs: a) by mounting fs with nodatacow, then
all newly created files will be NOCOW. b) per file. Add the NOCOW file
attribute. It could only be done to empty or new files.
This patch tries the second way, according to the option, it could add NOCOW
per file.
For most block drivers, since the create file step is in raw-posix.c, so we
can do setting NOCOW flag ioctl in raw-posix.c only.
But there are some exceptions, like block/vpc.c and block/vdi.c, they are
creating file by calling qemu_open directly. For them, do the same setting
NOCOW flag ioctl work in them separately.
[Fixed up 082.out due to the new 'nocow' creation option
--Stefan]
Signed-off-by: Chunyan Liu <cyliu@suse.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Now that all backend drivers are using QemuOpts, remove all
QEMUOptionParameter related codes.
Signed-off-by: Dong Xu Wang <wdongxu@linux.vnet.ibm.com>
Signed-off-by: Chunyan Liu <cyliu@suse.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Dong Xu Wang <wdongxu@linux.vnet.ibm.com>
Signed-off-by: Chunyan Liu <cyliu@suse.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
virtio-blk data-plane now uses the QEMU block layer for I/O. We do not
need raw_get_aio_fd() anymore. It was a layering violation anyway, so
let's get rid of it.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Hot unplugging -drive aio=native,file=test.img,format=raw images leaves
the Linux AIO event notifier and struct qemu_laio_state allocated.
Luckily nothing will use the event notifier after the BlockDriverState
has been closed so the handler function is never called.
It's still worth fixing this resource leak.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Drop the assumption that we're using the main AioContext for Linux AIO.
Convert the Linux AIO event notifier to use aio_set_event_notifier().
The .bdrv_detach/attach_aio_context() interfaces also need to be
implemented to move the event notifier handler from the old to the new
AioContext.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
In the MacOSX specific code in raw-posix.c we use the define
LONG_LONG_MAX. This is actually a non-standard pre-C99 define;
switch to using the standard LLONG_MAX instead.
This apparently fixes a compilation failure with certain
compiler/OS versions (though it is unclear which).
Reported-by: Peter Bartoli <peter@bartoli.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The current version of raw-posix always uses ioctl(FS_IOC_FIEMAP) if
FIEMAP is available; lseek with SEEK_HOLE/SEEK_DATA are not even
compiled in in this case. However, there may be implementations which
support the latter but not the former (e.g., NFSv4.2) as well as vice
versa.
To cover both cases, try FIEMAP first (as this will return -ENOTSUP if
not supported instead of returning a failsafe value (everything
allocated as a single extent)) and if that does not work, fall back to
SEEK_HOLE/SEEK_DATA.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Instead of having unlink() calls in the generic block layer, where we
aren't even guarateed to have a file name, move them to those block
drivers that are actually used and that always have a filename. Gets us
rid of some #ifdefs as well.
The patch also converts bs->is_temporary to a new BDRV_O_TEMPORARY open
flag so that it is inherited in the protocol layer and the raw-posix and
raw-win32 drivers can unlink the file.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Markus Armbruster
Stefan Hajnoczi
Ekaterina Tumanova
Denis V. Lunev
Max Reitz
Programmingkid
Paolo Bonzini
Roger Pau Monne
Tony Breeds
Kevin Wolf
Hu Tao
Ming Lei
Chunyan Liu
Peter Maydell