This will let block-stream reuse the enum. Places that used the enums
are renamed accordingly.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
We want to remove knowledge of BLOCK_ERR_STOP_ENOSPC from drivers;
drivers should only be told whether to stop/report/ignore the error.
On the other hand, we want to keep using the nicer BlockErrorAction
name in the drivers. So rename the enums, while leaving aside the
names of the enum values for now.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This patch adds modelling of the two NOR flash banks found on the
Versatile Express motherboard. Tested with U-Boot running on an emulated
Versatile Express, with either A9 or A15 CoreTile.
Signed-off-by: Francesco Lavra <francescolavra.fl@gmail.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
In the A series memory map (implemented in the Cortex A15 CoreTile), the
first NOR flash bank (flash 0) is mapped to address 0x08000000, while
address 0x00000000 can be configured as alias to either the first or the
second flash bank. This patch fixes the definition of flash 0 address,
and for simplicity removes the alias definition.
Signed-off-by: Francesco Lavra <francescolavra.fl@gmail.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
When setting up the NVIC memory regions the memory range
0x100..0xcff is aliased to an IO memory region that belongs
to the ARM GIC. This aliased region should be added to the
NVIC memory container, but the actual GIC IO memory region
was being added instead. This mixup was causing the wrong
IO memory access functions to be called when accessing parts
of the NVIC memory.
Signed-off-by: Meador Inge <meadori@codesourcery.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reading VECTADDR was causing us to set the current priority to
the wrong value, the most obvious effect of which was that we
would return the vector for the wrong interrupt as the result
of the read.
Signed-off-by: Brendan Fennell <bfennell@skynet.ie>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Added an option to let qemu transfer a configuration file to bios,
"etc/boot-fail-wait", which could be specified by command
-boot reboot-timeout=T
T have a max value of 0xffff, unit is ms.
With this option, guest will wait for a given time if not find
bootabled device, then reboot. If reboot-timeout is '-1', guest
will not reboot, qemu passes '-1' to bios by default.
This feature need the new seabios's support.
Seabios pulls the value from the fwcfg "file" interface, this
interface is used because SeaBIOS needs a reliable way of
obtaining a name, value size, and value. It in no way requires
that there be a real file on the user's host machine.
Signed-off-by: Amos Kong <akong@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This patch adds a "use64" property which will make the ivshmem driver
register a 64bit memory bar when set, so you have something to play with
when testing 64bit pci bits. It also allows to have quite big shared
memory regions, like this:
[root@fedora ~]# lspci -vs1:1
01:01.0 RAM memory: Red Hat, Inc Device 1110
Subsystem: Red Hat, Inc Device 1100
Physical Slot: 1-1
Flags: fast devsel
Memory at fd400000 (32-bit, non-prefetchable) [disabled] [size=256]
Memory at 8040000000 (64-bit, prefetchable) [size=1G]
[ v5: rebase, update compat property for post-1.2 merge ]
[ v4: rebase & adapt to latest master again ]
[ v3: rebase & adapt to latest master ]
[ v2: default to on as suggested by avi,
turn off for pc-$old using compat property ]
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Tested-by: Cam Macdonell <cam@cs.ualberta.ca>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Acked-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
In addition, there is no need to allocate an extra irq just for
rising SCI in irq handler. Just rise SCI right from notifier
handler instead.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
* stefanha/trivial-patches:
w32: Always use standard instead of native format strings
net/socket: Fix compiler warning (regression for MinGW)
linux-user: Remove redundant null check and replace free by g_free
qemu-timer: simplify qemu_run_timers
TextConsole: saturate escape parameter in TTY_STATE_CSI
curses: don't initialize curses when qemu is daemonized
dtrace backend: add function to reserved words
pflash_cfi01: Fix warning caused by unreachable code
ioh3420: Remove unreachable code
lm4549: Fix buffer overflow
cadence_uart: Fix buffer overflow
qemu-sockets: Fix potential memory leak
qemu-ga: Remove unreachable code after g_error
target-i386: Allow tsc-frequency to be larger then 2.147G
* bonzini/scsi-next:
SCSI: Standard INQUIRY data should report HiSup flag as set.
scsi-disk: use scsi_data_cdb_length
scsi: introduce scsi_cdb_length and scsi_data_cdb_length
scsi-disk: fix check for out-of-range LBA
scsi-disk: introduce check_lba_range
iSCSI: We dont need to explicitely call qemu_notify_event() any more
iSCSI: We need to support SG_IO also from iscsi_ioctl()
Report from smatch:
hw/pflash_cfi01.c:431 pflash_write(180) info: ignoring unreachable code.
Instead of removing the return statement after the switch statement,
the patch replaces the return statements in the switch statement by
break statements. Other switch statements in the same code do it also
like that.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Stefan Hajnoczi <stefanha@gmail.com>
Report from smatch:
hw/ioh3420.c:128 ioh3420_initfn(35) info: ignoring unreachable code.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@gmail.com>
Report from smatch:
lm4549.c:234 lm4549_write_samples(14) error:
buffer overflow 's->buffer' 1024 <= 1024
There must be enough space to add two entries starting with index
s->buffer_level, therefore the old check was wrong.
[Peter Maydell <peter.maydell@linaro.org> clarifies the nature of the
analyser warning:
I don't object to making the change to placate the analyser,
but I don't think this is actually a buffer overrun. We always
add and remove samples from the buffer two at a time, so it's
not possible to get here with s->buffer_level == BUFFER_SIZE-1
(which is the only case where the old and new conditions
give different answers).]
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Stefan Hajnoczi <stefanha@gmail.com>
Report from smatch:
hw/cadence_uart.c:413 uart_read(13) error: buffer overflow 's->r' 18 <= 18
This fixes read access to s->r[R_MAX] which is behind the limits of s->r.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Stefan Hajnoczi <stefanha@gmail.com>
* 'usb.65' of git://git.kraxel.org/qemu:
uhci: Don't queue up packets after one with the SPD flag set
usb-redir: Revert usb-redir part of commit 93bfef4c
usb-redir: Add chardev open / close debug logging
usb-redir: Add support for migration
usb-redir: Store max_packet_size in endp_data
usb-redir: Add an already_in_flight packet-id queue
usb-redir: Change cancelled packet code into a generic packet-id queue
ehci: Walk async schedule before and after migration
ehci: Don't set seen to 0 when removing unseen queue-heads
configure: usbredir fixes
ehci: Don't process too much frames in 1 timer tick (v2)
ehci: Fix interrupts stopping when Interrupt Threshold Control is 8
ehci: switch to new-style memory ops
usb-host: allow emulated (non-async) control requests without USBPacket
QEMU as far as I know only reports LUN numbers using the modes that
are described in SAM4.
As such, since all LUN numbers generated by the SCSI emulation in QEMU
follow SAM4, we should set the HiSup bit in the standard INQUIRY data
to indicate such.
From SAM4:
4.6.3 LUNs overview
All LUN formats described in this standard are hierarchical in
structure even when only a single level in that hierarchy is used.
The HISUP bit shall be set to one in the standard INQUIRY data
(see SPC-4) when any LUN format described in this standard is used.
Non-hierarchical formats are outside the scope of this standard.
Signed-off-by: Ronnie Sahlberg <ronniesahlberg@gmail.com>
This fix is needed to correctly handle 0-block read and writes.
Without it, a 0-block access at LBA 0 would underflow.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Drop the private reimplementation of ctz32() from pflash_cfi0[12]
in favour of using the standard version from host-utils.h.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
pflash_cfi01 announces a version number of 1.1, which implies
"Protection Register Information" and "Burst Read information"
sections, which are not provided.
Decrease the version number to 1.0 so that only the "Protection
Register Information" section is needed.
Set the number of protection fields (0x3f) to 0x01, as 0x00 means 256
protections field, which makes the CFI table bigger than the current
implementation, causing some kernels to fail to read it.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
There was a missing include of qemu-log and a variable name in a printf was out
of date.
Signed-off-by: Chris Wulff <crwulff@gmail.com>
Signed-off-by: Peter A. G. Crosthwaite <peter.crosthwaite@petalogix.com>
Assert that the ethernet and dma controller are sucessfully linked to their
peers.
Signed-off-by: Peter A. G. Crosthwaite <peter.crosthwaite@petalogix.com>
The "frequency" qdev prop matches the "clock-frequency" property in Xilinx EDK.
Renamed "frequency" -> "clock-frequency" accordingly.
Signed-off-by: Peter A. G. Crosthwaite <peter.crosthwaite@petalogix.com>
* kwolf/for-anthony:
block: Don't forget to delete temporary file
Don't require encryption password for 'qemu-img info' command
qemu-img: Add json output option to the info command.
qapi: Add SnapshotInfo and ImageInfo.
ahci: properly reset PxCMD on HBA reset
block: fix block tray status
vdi: Fix warning from clang
block/curl: Fix wrong free statement
ide: Fix error messages from static code analysis (no real error)
ATAPI: STARTSTOPUNIT only eject/load media if powercondition is 0
sheepdog: fix savevm and loadvm
* stefanha/trivial-patches:
configure: fix seccomp check
arch_init.c: add missing '%' symbols before PRIu64 in debug printfs
kvm: Fix warning from static code analysis
qapi: Fix enumeration typo error
console: Clean up bytes per pixel calculation
Fix copy&paste typos in documentation comments
linux-user: Remove #if 0'd cpu_get_real_ticks() definition
ui: Fix spelling in comment (ressource -> resource)
Spelling fixes in comments and macro names (ressource -> resource)
Fix spelling (licenced -> licensed) in GPL
Spelling fixes in comments and documentation
srp: Don't use QEMU_PACKED for single elements of a structured type
* stefanha/net:
net: EAGAIN handling for net/socket.c TCP
net: EAGAIN handling for net/socket.c UDP
net: asynchronous send/receive infrastructure for net/socket.c
net: broadcast hub packets if at least one port can receive
net: fix usbnet_receive() packet drops
net: clean up usbnet_receive()
net: add -netdev options to man page
net: do not report queued packets as sent
net: add receive_disabled logic to iov delivery path
eepro100: Fix network hang when rx buffers run out
xen: flush queue when getting an event
e1000: flush queue whenever can_receive can go from false to true
net: notify iothread after flushing queue
* qemu-kvm/uq/master:
kvm: Rename irqchip_inject_ioctl to irq_set_ioctl
kvm: Stop flushing coalesced MMIO on vmexit
VGA: Flush coalesced MMIO on related MMIO/PIO accesses
memory: Flush coalesced MMIO on mapping and state changes
memory: Fold memory_region_update_topology into memory_region_transaction_commit
memory: Use transaction_begin/commit also for single-step operations
memory: Flush coalesced MMIO on selected region access
kvm-all.c: Move init of irqchip_inject_ioctl out of kvm_irqchip_create()
update-linux-headers.sh: Don't hard code list of architectures
We have debugcon these days to listen on those ports that receive debug
messages. Also drop the others that have no effect anymore.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Now that CONFIG_TCG_PASS_AREG0 is enabled for all targets,
remove dead code and support for !CONFIG_TCG_PASS_AREG0 case.
Remove dyngen-exec.h and all references to it. Although included by
hw/spapr_hcall.c, it does not seem to use it.
Remove unused HELPER_CFLAGS.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
The USB network interface has a single buffer which the guest reads
from. This patch prevents multiple calls to usbnet_receive() from
clobbering the input buffer. Instead we queue packets until buffer
space becomes available again.
This is inspired by virtio-net and e1000 rxbuf handling.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
The USB network interface has two code paths depending on whether or not
RNDIS mode is enabled. Refactor usbnet_receive() so that there is a
common path throughout the function instead of duplicating everything
across if (is_rndis(s)) ... else ... code paths.
Clean up coding style and 80 character line wrap along the way.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
This is reported by QA. When installing os with pxe, after the initial
kernel and initrd are loaded, the procedure tries to copy files from install
server to local harddisk, the network becomes stall because of running out of
receive descriptor.
[Whitespace fixes and removed qemu_notify_event() because Paolo's
earlier net patches have moved it into qemu_flush_queued_packets().
Additional info:
I can reproduce the network hang with a tap device doing a iPXE HTTP
boot as follows:
$ qemu -enable-kvm -m 1024 \
-netdev tap,id=netdev0,script=no,downscript=no \
-device i82559er,netdev=netdev0,romfile=80861209.rom \
-drive if=virtio,cache=none,file=test.img
iPXE> ifopen net0
iPXE> config # set static network configuration
iPXE> kernel http://mirror.bytemark.co.uk/fedora/linux/releases/17/Fedora/x86_64/os/images/pxeboot/vmlinuz
I needed a vanilla iPXE ROM to get to the iPXE prompt. I think the boot
prompt has been disabled in the ROMs that ship with QEMU to reduce boot
time.
During the vmlinuz HTTP download there is a network hang. hw/eepro100.c
has reached the end of the rx descriptor list. When the iPXE driver
replenishes the rx descriptor list we don't kick the QEMU net subsystem
and event loop, thereby leaving the tap netdev without its file
descriptor in select(2).
Stefan Hajnoczi <stefanha@gmail.com>]
Signed-off-by: Bo Yang <boyang@suse.com>
Signed-off-by: Stefan Hajnoczi <stefanha@gmail.com>
xen does not have a register that, when written, will cause can_receive
to go from false to true. However, flushing the queue can be attempted
whenever the front-end raises its side of the Xen event channel. There
is a single event channel for tx and rx.
Cc: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Cc: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Amos Kong <akong@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
When the guests replenish the receive ring buffer, the network device
should flush its queue of pending packets. This is done with
qemu_flush_queued_packets.
e1000's can_receive can go from false to true when RCTL or RDT are
modified.
Reported-by: Luigi Rizzo <rizzo@iet.unipi.it>
Cc: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Cc: Jan Kiszka <jan.kiszka@siemens.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Amos Kong <akong@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
virtio-net has code to flush the queue and notify the iothread
whenever new receive buffers are added by the guest. That is
fine, and indeed we need to do the same in all other drivers.
However, notifying the iothread should be work for the network
subsystem. And since we are at it we can add a little smartness:
if some of the queued packets already could not be delivered,
there is no need to notify the iothread.
Reported-by: Luigi Rizzo <rizzo@iet.unipi.it>
Cc: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Cc: Jan Kiszka <jan.kiszka@siemens.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Amos Kong <akong@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Macro XEN_HOST_PCI_RESOURCE_BUFFER_SIZE is only used locally,
so the change should be safe.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
These wrong spellings were detected by codespell:
* successully -> successfully
* alot -> a lot
* wanna -> want to
* infomation -> information
* occured -> occurred
["also is" -> "is also" and "ressources" -> "resources" suggested by
Peter Maydell <peter.maydell@linaro.org>]
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
QEMU_PACKED results in a MinGW compiler warning when it is
used for single structure elements:
warning: 'gcc_struct' attribute ignored
Using QEMU_PACKED for the whole structure avoids the compiler warning
without changing the memory layout.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
