Commit Graph

18 Commits

Author SHA1 Message Date
Vladimir Sementsov-Ogievskiy 9dd003a998 iotests: define group in each iotest
We are going to drop group file. Define group in tests as a preparatory
step.

The patch is generated by

    cd tests/qemu-iotests

    grep '^[0-9]\{3\} ' group | while read line; do
        file=$(awk '{print $1}' <<< "$line");
        groups=$(sed -e 's/^... //' <<< "$line");
        awk "NR==2{print \"# group: $groups\"}1" $file > tmp;
        cat tmp > $file;
    done

Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20210116134424.82867-7-vsementsov@virtuozzo.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
2021-01-20 14:53:22 -06:00
Eric Blake b66ff2c298 iotests: Specify explicit backing format where sensible
There are many existing qcow2 images that specify a backing file but
no format.  This has been the source of CVEs in the past, but has
become more prominent of a problem now that libvirt has switched to
-blockdev.  With older -drive, at least the probing was always done by
qemu (so the only risk of a changed format between successive boots of
a guest was if qemu was upgraded and probed differently).  But with
newer -blockdev, libvirt must specify a format; if libvirt guesses raw
where the image was formatted, this results in data corruption visible
to the guest; conversely, if libvirt guesses qcow2 where qemu was
using raw, this can result in potential security holes, so modern
libvirt instead refuses to use images without explicit backing format.

The change in libvirt to reject images without explicit backing format
has pointed out that a number of tools have been far too reliant on
probing in the past.  It's time to set a better example in our own
iotests of properly setting this parameter.

iotest calls to create, rebase, and convert are all impacted to some
degree.  It's a bit annoying that we are inconsistent on command line
- while all of those accept -o backing_file=...,backing_fmt=..., the
shortcuts are different: create and rebase have -b and -F, while
convert has -B but no -F.  (amend has no shortcuts, but the previous
patch just deprecated the use of amend to change backing chains).

Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20200706203954.341758-9-eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2020-07-14 15:18:59 +02:00
Max Reitz 801ddbda71 iotests: Fix cleanup path in some tests
Some iotests leave behind some external data file when run for qcow2
with -o data_file.  Fix that.

Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20200224171631.384314-1-mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
2020-03-24 11:57:38 +01:00
Max Reitz d88bef1921 iotests: Avoid cp/mv of test images
This will not work with external data files, so try to get tests working
without it as far as possible.

Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-id: 20191107163708.833192-17-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
2020-01-06 13:43:07 +01:00
Max Reitz f91ecbd74e iotests: Use _rm_test_img for deleting test images
Just rm will not delete external data files.  Use _rm_test_img every
time we delete a test image.

(In the process, clean up the indentation of every _cleanup() this patch
touches.)

((Also, use quotes consistently.  I am happy to see unquoted instances
like "rm -rf $TEST_DIR/..." go.))

Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-id: 20191107163708.833192-16-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
2020-01-06 13:43:07 +01:00
Thomas Huth b3763a195c tests/qemu-iotests: Remove the "_supported_os Linux" line from many tests
A lot of tests run fine on FreeBSD and macOS, too - the limitation
to Linux here was likely just copied-and-pasted from other tests.
Thus remove the "_supported_os Linux" line from tests that run
successful in our CI pipelines on FreeBSD and macOS.

Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Message-Id: <20190502084506.8009-6-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
2019-05-21 10:13:58 +02:00
Philippe Mathieu-Daudé 11a82d1429 qemu-iotests: Improve portability by searching bash in the $PATH
Bash is not always installed as /bin/bash. In particular on OpenBSD,
the package installs it in /usr/local/bin.
Use the 'env' shebang to search bash in the $PATH.

Patch created mechanically by running:

  $ git grep -lE '#! ?/bin/bash' -- tests/qemu-iotests \
    | while read f; do \
      sed -i 's|^#!.\?/bin/bash$|#!/usr/bin/env bash|' $f; \
    done

Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2019-03-08 12:26:45 +01:00
Eric Blake 8cedcffdc1 iotests: Drop use of bash keyword 'function'
Bash allows functions to be declared with or without the leading
keyword 'function'; but including the keyword does not comply with
POSIX syntax, and is confusing to ksh users where the use of the
keyword changes the scoping rules for functions.  Stick to the
POSIX form through iotests.

Done mechanically with:
  sed -i 's/^function //' $(git ls-files tests/qemu-iotests)

Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20181116215002.2124581-1-eblake@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
2018-11-19 11:16:46 -06:00
Mao Zhongyi bf22957309 qemu-iotests: remove unused variable 'here'
Running
git grep '\$here' tests/qemu-iotests

has 0 hits, which means we are setting a variable that has
no use.  It appears that commit e8f8624d removed the last
use.  So execute the following cmd to remove all of
the 'here=...' lines as dead code.

sed -i '/^here=/d' $(git grep -l '^here=' tests/qemu-iotests)

Cc: kwolf@redhat.com
Cc: mreitz@redhat.com
Cc: eblake@redhat.com
Suggested-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Mao Zhongyi <maozhongyi@cmss.chinamobile.com>
Message-Id: <20181024094051.4470-3-maozhongyi@cmss.chinamobile.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
[eblake: touch up commit message, reorder series, rebase to master]
Signed-off-by: Eric Blake <eblake@redhat.com>
2018-11-19 10:08:19 -06:00
Markus Armbruster c42e8742f5 block: Use JSON null instead of "" to disable backing file
BlockdevRef is an alternate of BlockdevOptions (inline definition) and
str (reference to an existing block device by name).  BlockdevRef
value "" is special: "no block device should be referenced."  It's
actually interpreted that way in just one place: optional member
@backing of COW formats.  Semantics:

* Present means "use this block device" as backing storage

* Absent means "default to the one stored in the image"

* Except "" means "don't use backing storage at all"

The first two are perfectly normal: when the parameter is absent, it
defaults to an implied value, but the value's meaning is the same.

The third one overloads the parameter with a second meaning.  The
overloading is *implicit*, i.e. it's not visible in the types.  Works
here, because "" is not a value block device ID.

Pressing argument values the schema accepts, but are semantically
invalid, into service to mean "do something else entirely" is not
general, as suitable invalid values need not exist.  I also find it
ugly.

To clean this up, we could add a separate flag argument to suppress
@backing, or add a distinct value to @backing.  This commit implements
the latter: add JSON null to the values of @backing, deprecate "".

Because we're so close to the 2.10 freeze, implement it in the
stupidest way possible: have qmp_blockdev_add() rewrite null to ""
before anything else can see the null.  Works, because BlockdevRef
occurs only within arguments of blockdev-add.  The proper way to do it
would be rewriting "" to null, preferably in a cleaner way, but that
requires fixing up code to work with null.  Add a TODO comment for
that.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
Acked-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
2017-07-24 13:35:11 +02:00
John Snow 6e6e55f5c2 qemu-img: Check for backing image if specified during create
Or, rather, force the open of a backing image if one was specified
for creation. Using a similar -unsafe option as rebase, allow qemu-img
to ignore the backing file validation if possible.

It may not always be possible, as in the existing case when a filesize
for the new image was not specified.

This is accomplished by shifting around the conditionals in
bdrv_img_create, such that a backing file is always opened unless we
provide BDRV_O_NO_BACKING. qemu-img is adjusted to pass this new flag
when -u is provided to create.

Sorry for the heinous looking diffstat, but it's mostly whitespace.

Inspired by: https://bugzilla.redhat.com/show_bug.cgi?id=1213786

Signed-off-by: John Snow <jsnow@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2017-07-18 15:27:37 +02:00
Fam Zheng ecffa63421 iotests: 085: Avoid image locking conflict
In the case where we test the expected error when a blockdev-snapshot
target already has a backing image, the backing chain is opened multiple
times. This will be a problem when we use image locking, so use a
different backing file that is not already open.

Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2017-05-11 11:08:40 +02:00
Kevin Wolf 0153d2f50b block: Remove "options" indirection from blockdev-add
Now that QAPI supports boxed types, we can have unions at the top level
of a command, so let's put our real options directly there for
blockdev-add instead of having a single "options" dict that contains the
real arguments.

blockdev-add is still experimental and we already made substantial
changes to the API recently, so we're free to make changes like this
one, too.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
2016-10-24 17:54:03 +02:00
Alberto Garcia 3fa123d059 block: test 'blockdev-snapshot' using a file BDS as the overlay
This test checks that it is not possible to create a snapshot if the
requested overlay node is a BDS which does not support backing images.

Signed-off-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2015-11-11 16:25:48 +01:00
Alberto Garcia f2d7f16f94 block: Remove inner quotation marks in iotest 085
This patch removes the inner quotation marks in all cases like this:

   cmd=" ... "${variable}" ... "

Signed-off-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2015-11-11 16:25:48 +01:00
Alberto Garcia 89e3a2d86d block: add tests for the 'blockdev-snapshot' command
Signed-off-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2015-11-11 16:25:47 +01:00
Jeff Cody e86e869770 block: qemu-iotests - update 085 to use common.qemu
The new functionality of common.qemu implements the QEMU control
and communication functionality that was originally in test 085.

This removes that now-duplicate functionality, and uses the
common.qemu functions.

The QEMU commandline changes slightly due to this; in addition to
monitor and qmp i/o options, the new QEMU commandline from inside
common.qemu now introduces -machine accel=qtest.

Reviewed-by: Benoit Canet <benoit@irqsave.net>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-05-09 20:57:32 +02:00
Jeff Cody 4089f7c6a0 block: qemu-iotests 085 - live snapshots tests
This adds tests for live snapshots, both through the single
snapshot command, and the transaction group snapshot command.

The snapshots are done through the QMP interface, using the
following commands for snapshots:

Single snapshot:
{ 'execute': 'blockdev-snapshot-sync', 'arguments':
             { 'device': 'virtio0', 'snapshot-file':'...',
               'format': 'qcow2' } }"

Group snapshot:
{ 'execute': 'transaction', 'arguments':
              {'actions': [
                  { 'type': 'blockdev-snapshot-sync', 'data' :
                    { 'device': 'virtio0', 'snapshot-file': '...' } },
                  { 'type': 'blockdev-snapshot-sync', 'data' :
                    { 'device': 'virtio1', 'snapshot-file': '...' } } ]
             } }

Signed-off-by: Jeff Cody <jcody@redhat.com>
Reviewed-by: Benoit Canet <benoit@irqsave.net>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-03-07 11:36:12 +01:00