This validates that we correctly handle multifd migration success
and failure scenarios when using TLS with pre shared keys.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20220426160048.812266-8-berrange@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Most of the multifd migration test logic is common with the rest of the
precopy tests, so it can use the helper without difficulty. The only
exception of the multifd cancellation test which tries to run multiple
migrations in a row.
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20220426160048.812266-7-berrange@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Most of the XBZRLE migration test logic is common with the rest of the
precopy tests, so it can use the helper with just one small tweak.
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20220426160048.812266-6-berrange@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
This validates that we correctly handle migration success and failure
scenarios when using TLS with x509 certificates. There are quite a few
different scenarios that matter in relation to hostname validation.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20220426160048.812266-5-berrange@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
dgilbert: Manual merge due to ifdef change in 3
This validates that we correctly handle migration success and failure
scenarios when using TLS with pre shared keys.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20220426160048.812266-4-berrange@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
These macros are more suited to the general consumers of certs in the
test suite, where we don't need to exercise every single possible
permutation.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20220426160048.812266-3-berrange@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
We need to encode just the address bytes, not the whole struct sockaddr
data. Add a test case to validate that we're matching on SAN IP
addresses correctly.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20220426160048.812266-2-berrange@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Add CXL Fixed Memory Windows to the CXL tests.
Signed-off-by: Ben Widawsky <ben.widawsky@intel.com>
Co-developed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Message-Id: <20220429144110.25167-40-Jonathan.Cameron@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Tables that differ from normal Q35 tables when running the CXL test.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Message-Id: <20220429144110.25167-39-Jonathan.Cameron@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The DSDT includes several CXL specific elements and the CEDT
table is only present if we enable CXL.
The test exercises all current functionality with several
CFMWS, CHBS structures in CEDT and ACPI0016/ACPI00017 and _OSC
entries in DSDT.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Message-Id: <20220429144110.25167-38-Jonathan.Cameron@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Add exceptions for the DSDT and the new CEDT tables
specific to a new CXL test in the following patch.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Message-Id: <20220429144110.25167-37-Jonathan.Cameron@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
At this stage we can boot configurations with host bridges,
root ports and type 3 memory devices, so add appropriate
tests.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20220429144110.25167-23-Jonathan.Cameron@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Initial test with just pxb-cxl. Other tests will be added
alongside functionality.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20220429144110.25167-16-Jonathan.Cameron@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
common.rc has some complicated logic to find the common.config that
dates back to xfstests and is completely unnecessary now. Just include
the contents of the file.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20220505094723.732116-1-pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
According to the NBD spec, a server that advertises
NBD_FLAG_CAN_MULTI_CONN promises that multiple client connections will
not see any cache inconsistencies: when properly separated by a single
flush, actions performed by one client will be visible to another
client, regardless of which client did the flush.
We always satisfy these conditions in qemu - even when we support
multiple clients, ALL clients go through a single point of reference
into the block layer, with no local caching. The effect of one client
is instantly visible to the next client. Even if our backend were a
network device, we argue that any multi-path caching effects that
would cause inconsistencies in back-to-back actions not seeing the
effect of previous actions would be a bug in that backend, and not the
fault of caching in qemu. As such, it is safe to unconditionally
advertise CAN_MULTI_CONN for any qemu NBD server situation that
supports parallel clients.
Note, however, that we don't want to advertise CAN_MULTI_CONN when we
know that a second client cannot connect (for historical reasons,
qemu-nbd defaults to a single connection while nbd-server-add and QMP
commands default to unlimited connections; but we already have
existing means to let either style of NBD server creation alter those
defaults). This is visible by no longer advertising MULTI_CONN for
'qemu-nbd -r' without -e, as in the iotest nbd-qemu-allocation.
The harder part of this patch is setting up an iotest to demonstrate
behavior of multiple NBD clients to a single server. It might be
possible with parallel qemu-io processes, but I found it easier to do
in python with the help of libnbd, and help from Nir and Vladimir in
writing the test.
Signed-off-by: Eric Blake <eblake@redhat.com>
Suggested-by: Nir Soffer <nsoffer@redhat.com>
Suggested-by: Vladimir Sementsov-Ogievskiy <v.sementsov-og@mail.ru>
Message-Id: <20220512004924.417153-3-eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Add the reproducer from https://gitlab.com/qemu-project/qemu/-/issues/339
Without the previous commit, when running 'make check-qtest-i386'
with QEMU configured with '--enable-sanitizers' we get:
==4028352==ERROR: AddressSanitizer: heap-buffer-overflow on address 0x619000062a00 at pc 0x5626d03c491a bp 0x7ffdb4199410 sp 0x7ffdb4198bc0
READ of size 786432 at 0x619000062a00 thread T0
#0 0x5626d03c4919 in __asan_memcpy (qemu-system-i386+0x1e65919)
#1 0x5626d1c023cc in flatview_write_continue softmmu/physmem.c:2787:13
#2 0x5626d1bf0c0f in flatview_write softmmu/physmem.c:2822:14
#3 0x5626d1bf0798 in address_space_write softmmu/physmem.c:2914:18
#4 0x5626d1bf0f37 in address_space_rw softmmu/physmem.c:2924:16
#5 0x5626d1bf14c8 in cpu_physical_memory_rw softmmu/physmem.c:2933:5
#6 0x5626d0bd5649 in cpu_physical_memory_write include/exec/cpu-common.h:82:5
#7 0x5626d0bd0a07 in i8257_dma_write_memory hw/dma/i8257.c:452:9
#8 0x5626d09f825d in fdctrl_transfer_handler hw/block/fdc.c:1616:13
#9 0x5626d0a048b4 in fdctrl_start_transfer hw/block/fdc.c:1539:13
#10 0x5626d09f4c3e in fdctrl_write_data hw/block/fdc.c:2266:13
#11 0x5626d09f22f7 in fdctrl_write hw/block/fdc.c:829:9
#12 0x5626d1c20bc5 in portio_write softmmu/ioport.c:207:17
0x619000062a00 is located 0 bytes to the right of 512-byte region [0x619000062800,0x619000062a00)
allocated by thread T0 here:
#0 0x5626d03c66ec in posix_memalign (qemu-system-i386+0x1e676ec)
#1 0x5626d2b988d4 in qemu_try_memalign util/oslib-posix.c:210:11
#2 0x5626d2b98b0c in qemu_memalign util/oslib-posix.c:226:27
#3 0x5626d09fbaf0 in fdctrl_realize_common hw/block/fdc.c:2341:20
#4 0x5626d0a150ed in isabus_fdc_realize hw/block/fdc-isa.c:113:5
#5 0x5626d2367935 in device_set_realized hw/core/qdev.c:531:13
SUMMARY: AddressSanitizer: heap-buffer-overflow (qemu-system-i386+0x1e65919) in __asan_memcpy
Shadow bytes around the buggy address:
0x0c32800044f0: fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa
0x0c3280004500: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x0c3280004510: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x0c3280004520: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x0c3280004530: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
=>0x0c3280004540:[fa]fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa
0x0c3280004550: fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa
0x0c3280004560: fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa
0x0c3280004570: fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa
0x0c3280004580: fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa
0x0c3280004590: fd fd fd fd fd fd fd fd fd fd fd fd fd fd fd fd
Shadow byte legend (one shadow byte represents 8 application bytes):
Addressable: 00
Heap left redzone: fa
Freed heap region: fd
==4028352==ABORTING
[ kwolf: Added snapshot=on to prevent write file lock failure ]
Reported-by: Alexander Bulekov <alxndr@bu.edu>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Alexander Bulekov <alxndr@bu.edu>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
When running I/O tests using TAP output mode, we get a single TAP test
with a sub-test reported for each I/O test that is run. The output looks
something like this:
1..123
ok qcow2 011
ok qcow2 012
ok qcow2 013
ok qcow2 217
...
If everything runs or fails normally this is fine, but periodically we
have been seeing the test harness abort early before all 123 tests have
been run, just leaving a fairly useless message like
TAP parsing error: Too few tests run (expected 123, got 107)
we have no idea which tests were running at the time the test harness
abruptly exited. This change causes us to print a message about our
intent to run each test, so we have a record of what is active at the
time the harness exits abnormally.
1..123
# running qcow2 011
ok qcow2 011
# running qcow2 012
ok qcow2 012
# running qcow2 013
ok qcow2 013
# running qcow2 217
ok qcow2 217
...
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20220509124134.867431-2-berrange@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
When stdout is not a terminal, the buffer may not be flushed at each end
of line, so we should flush after each test is done. This is especially
apparent when run by check-block, in two ways:
First, when running make check-block -jX with X > 1, progress indication
was missing, even though testrunner.py does theoretically print each
test's status once it has been run, even in multi-processing mode.
Flushing after each test restores this progress indication.
Second, sometimes make check-block failed altogether, with an error
message that "too few tests [were] run". I presume that's because one
worker process in the job pool did not get to flush its stdout before
the main process exited, and so meson did not get to see that worker's
test results. In any case, by flushing at the end of run_test(), the
problem has disappeared for me.
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20220506134215.10086-1-hreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Up to now the virt-machine node contains a virtio-mmio node.
However no driver produces any PCI interface node. Hence, PCI
tests cannot be run with aarch64 binary.
Add a GPEX driver node that produces a pci interface node. This latter
then can be consumed by all the pci tests. One of the first motivation
was to be able to run the virtio-iommu-pci tests.
We still face an issue with pci hotplug tests as hotplug cannot happen
on the pcie root bus and require a generic root port. This will be
addressed later on.
We force cpu=max along with aarch64/virt machine as some PCI tests
require high MMIO regions to be available.
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Message-Id: <20220504152025.1785704-4-eric.auger@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
ARM does not not support hotplug on pcie.0. Add a flag on the bus
which tells if devices can be hotplugged and skip hotplug tests
if the bus cannot be hotplugged. This is a temporary solution to
enable the other pci tests on aarch64.
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Acked-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20220504152025.1785704-3-eric.auger@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
At the moment the IO space limit is hardcoded to
QPCI_PIO_LIMIT = 0x10000. When accesses are performed to a bar,
the base address of this latter is compared against the limit
to decide whether we perform an IO or a memory access.
On ARM, we cannot keep this PIO limit as the arm-virt machine
uses [0x3eff0000, 0x3f000000 ] for the IO space map and we
are mandated to allocate at 0x0.
Add a new flag in QPCIBar indicating whether it is an IO bar
or a memory bar. This flag is set on QPCIBar allocation and
provisionned based on the BAR configuration. Then the new flag
is used in access functions and in iomap() function.
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20220504152025.1785704-2-eric.auger@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Leading underscores are ill-advised because such identifiers are
reserved. Trailing underscores are merely ugly. Strip both.
Our header guards commonly end in _H. Normalize the exceptions.
Macros should be ALL_CAPS. Normalize the exception.
Done with scripts/clean-header-guards.pl.
include/hw/xen/interface/ and tools/virtiofsd/ left alone, because
these were imported from Xen and libfuse respectively.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20220506134911.2856099-3-armbru@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Header guard symbols should match their file name to make guard
collisions less likely.
Cleaned up with scripts/clean-header-guards.pl, followed by some
renaming of new guard symbols picked by the script to better ones.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20220506134911.2856099-2-armbru@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
[Change to generated file ebpf/rss.bpf.skeleton.h backed out]
In aarch64_numa_cpu(), the CPU and NUMA association is something
like below. Two threads in the same core/cluster/socket are
associated with two individual NUMA nodes, which is unreal as
Igor Mammedov mentioned. We don't expect the association to break
NUMA-to-socket boundary, which matches with the real world.
NUMA-node socket cluster core thread
------------------------------------------
0 0 0 0 0
1 0 0 0 1
This corrects the topology for CPUs and their association with
NUMA nodes. After this patch is applied, the CPU and NUMA
association becomes something like below, which looks real.
Besides, socket/cluster/core/thread IDs are all checked when
the NUMA node IDs are verified. It helps to check if the CPU
topology is properly populated or not.
NUMA-node socket cluster core thread
------------------------------------------
0 1 0 0 0
1 0 0 0 0
Suggested-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Gavin Shan <gshan@redhat.com>
Acked-by: Igor Mammedov <imammedo@redhat.com>
Message-id: 20220503140304.855514-5-gshan@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The CPU topology isn't enabled on arm/virt machine yet, but we're
going to do it in next patch. After the CPU topology is enabled by
next patch, "thread-id=1" becomes invalid because the CPU core is
preferred on arm/virt machine. It means these two CPUs have 0/1
as their core IDs, but their thread IDs are all 0. It will trigger
test failure as the following message indicates:
[14/21 qemu:qtest+qtest-aarch64 / qtest-aarch64/numa-test ERROR
1.48s killed by signal 6 SIGABRT
>>> G_TEST_DBUS_DAEMON=/home/gavin/sandbox/qemu.main/tests/dbus-vmstate-daemon.sh \
QTEST_QEMU_STORAGE_DAEMON_BINARY=./storage-daemon/qemu-storage-daemon \
QTEST_QEMU_BINARY=./qemu-system-aarch64 \
QTEST_QEMU_IMG=./qemu-img MALLOC_PERTURB_=83 \
/home/gavin/sandbox/qemu.main/build/tests/qtest/numa-test --tap -k
――――――――――――――――――――――――――――――――――――――――――――――
stderr:
qemu-system-aarch64: -numa cpu,node-id=0,thread-id=1: no match found
This fixes the issue by providing comprehensive SMP configurations
in aarch64_numa_cpu(). The SMP configurations aren't used before
the CPU topology is enabled in next patch.
Signed-off-by: Gavin Shan <gshan@redhat.com>
Reviewed-by: Yanan Wang <wangyanan55@huawei.com>
Message-id: 20220503140304.855514-3-gshan@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
tests/vm/openbsd: Update to release 7.1
Signed-off-by: Brad Smith <brad@comstyle.com>
Tested-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Warner Losh <imp@bsdimp.com>
Message-Id: <YnRed7sw45lTbRjb@humpty.home.comstyle.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
When using Meson options rather than config-host.h, the "when" clauses
have to be changed to if statements (which is not necessarily great,
though at least it highlights which parts of the build are per-target
and which are not).
Do that before moving vhost logic to meson.build, though for now
the variables are just based on config-host.mak data.
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Timer test assumes that timer 0 IRQ has level 1 and other timers have
higher level IRQs. This assumption is not correct and the levels may be
arbitrary. Fix that assumption by providing TIMER*_VECTOR macro and
using it for vector selection and by making the check for the timer
exception cause conditional.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
MMU test suite is disabled for cores that have spanning TLB way, i.e.
for all MMUv3 cores. Instead of disabling it make testing region virtual
addresses explicit and invalidate TLB mappings for entries that conflict
with the test.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Autorefill tests in the phys_mem test suite are disabled for cores that
have spanning TLB way, i.e. for all MMUv3 cores. Instead of disabling it
invalidate TLB mappings for entries that conflict with the test.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
xtensa core may not have the loop option, but still have timers. Don't
use loop opcode in the timer test.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
xtensa core may have only one set of DBREAKA/DBREAKC registers. Don't
hardcode register numbers in the test as 0 and 1, use macros that only
index valid DBREAK* registers.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Writing garbage into the vecbase SR results in hang in the subsequent
tests that expect to raise an exception. Restore vecbase SR to its
reset value after the test.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
* Enable read access to performance counters from EL0
* Enable SCTLR_EL1.BT0 for aarch64-linux-user
* Refactoring of cpreg handling
-----BEGIN PGP SIGNATURE-----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=Q7ra
-----END PGP SIGNATURE-----
Merge tag 'pull-target-arm-20220505' of https://git.linaro.org/people/pmaydell/qemu-arm into staging
target-arm queue:
* Enable read access to performance counters from EL0
* Enable SCTLR_EL1.BT0 for aarch64-linux-user
* Refactoring of cpreg handling
# -----BEGIN PGP SIGNATURE-----
#
# iQJNBAABCAA3FiEE4aXFk81BneKOgxXPPCUl7RQ2DN4FAmJzlJYZHHBldGVyLm1h
# eWRlbGxAbGluYXJvLm9yZwAKCRA8JSXtFDYM3rQXEACqtWhESD9ZJ0T1DfiWh7HX
# KXZuvB5C4kEdY8KXPJsdFM47KGMB29AI1pfqN5oRvalGG40ROM1HNTO44LSjKgUr
# b+aEq0bcbOJQuhfc5EPoh3b9wekowxlBYsH3Zq251J6ua6dRd1iqdeGXFIZbn02x
# RY5lXB2wgWh8LnF+qwoLiIrqJWsJ8PSOolyl0LrKjI3Z22UboK1Y5K0sbJBlavX4
# xKEyd4Af1Jq+1GcleSymAjcNF1iO+38w6rrFSgMWj+f3HSjKCk+MHU78rfqVNa88
# ESRjBj1x3c8kRzNzy+Q8ntJ5QzREvFDpUYBC9lvnoLKQ6xRJWDvvZQw2YJGsH8sB
# Xgg8fQ75iYEQdN4SHLWn24OwZpKuzTZ4QYm0d02GiAZCGXgAFEIKG62lBd3UJTAy
# 6wTUdjuLv/KA+Lc3qdvmFfOVxfPh728VvFl55IoGXZv9FFrxvrluLEgr3TIje9W3
# 0r1FcjtAuuTHzKiaf8UsmvMW9nR550L1xQ+uMY8GKQvQgSvkf050srVZS05GFItH
# DqCUv++hsyi0b44J377cUKkAEOdH/rhV20pvvfoJthRgmHLNN5LG61JI9eK9JXzl
# +AYpbxAC3R6f0dp6/31D0ZRhW7wcC/rt1EVK/iACVKoGo8hZf3lC64y2+3TVoApF
# DdCadVNnR9eUFWh1inGXKQ==
# =Q7ra
# -----END PGP SIGNATURE-----
# gpg: Signature made Thu 05 May 2022 04:10:46 AM CDT
# gpg: using RSA key E1A5C593CD419DE28E8315CF3C2525ED14360CDE
# gpg: issuer "peter.maydell@linaro.org"
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>" [full]
# gpg: aka "Peter Maydell <pmaydell@gmail.com>" [full]
# gpg: aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>" [full]
* tag 'pull-target-arm-20220505' of https://git.linaro.org/people/pmaydell/qemu-arm: (23 commits)
target/arm: read access to performance counters from EL0
target/arm: Add isar_feature_{aa64,any}_ras
target/arm: Add isar predicates for FEAT_Debugv8p2
target/arm: Remove HOST_BIG_ENDIAN ifdef in add_cpreg_to_hashtable
target/arm: Reformat comments in add_cpreg_to_hashtable
target/arm: Perform override check early in add_cpreg_to_hashtable
target/arm: Hoist isbanked computation in add_cpreg_to_hashtable
target/arm: Use bool for is64 and ns in add_cpreg_to_hashtable
target/arm: Consolidate cpreg updates in add_cpreg_to_hashtable
target/arm: Hoist computation of key in add_cpreg_to_hashtable
target/arm: Merge allocation of the cpreg and its name
target/arm: Store cpregs key in the hash table directly
target/arm: Drop always-true test in define_arm_vh_e2h_redirects_aliases
target/arm: Name CPSecureState type
target/arm: Name CPState type
target/arm: Change cpreg access permissions to enum
target/arm: Avoid bare abort() or assert(0)
target/arm: Reorg ARMCPRegInfo type field bits
target/arm: Make some more cpreg data static const
target/arm: Replace sentinels with ARRAY_SIZE in cpregs.h
...
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This controls whether the PACI{A,B}SP instructions trap with BTYPE=3
(indirect branch from register other than x16/x17). The linux kernel
sets this in bti_enable().
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/998
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20220427042312.294300-1-richard.henderson@linaro.org
[PMM: remove stray change to makefile comment]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This should work for all format drivers that support reopening, so test
it.
(This serves as a regression test for HEAD^: This test used to fail for
VMDK before HEAD^.)
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20220314162719.65384-3-hreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Create a VM with a BDS in an iothread, add -incoming defer to the
command line, and then export this BDS via NBD. Doing so should not
fail an assertion.
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20220427114057.36651-5-hreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Tested-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Binutils >=2.37 and Clang do not accept (. - 0x100000000) PCRel32
constants. While this looks like a bug that needs fixing, use a
different notation (-0x100000000) as a workaround.
Reported-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Message-Id: <20220502164830.1622191-1-iii@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: David Miller <dmiller423@gmail.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Tested-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20220428094708.84835-14-david@redhat.com>
[thuth: Only add test if -march=z15 is supported. Fix constraints for Clang]
Signed-off-by: Thomas Huth <thuth@redhat.com>
The qemu_*block() functions are meant to be be used with sockets (the
win32 implementation expects SOCKET)
Over time, those functions where used with Win32 SOCKET or
file-descriptors interchangeably. But for portability, they must only be
used with socket-like file-descriptors. FDs can use
g_unix_set_fd_nonblocking() instead.
Rename the functions with "socket" in the name to prevent bad usages.
This is effectively reverting commit f9e8cacc55 ("oslib-posix:
rename socket_set_nonblock() to qemu_set_nonblock()").
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
The call is POSIX-specific. Use the dedicated GLib API.
(this is a preliminary patch before renaming qemu_set_nonblock())
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Suggested-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Suggested-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
This will help moving QAPI/QMP in a common subproject.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Acked-by: Thomas Huth <thuth@redhat.com>
Since commit a2ce7dbd91 ("meson: convert tests/qtest to meson"),
libqtest.h is under libqos/ directory, while libqtest.c is still in
qtest/. Move back to its original location to avoid mixing with libqos/.
Suggested-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
I was setting gpioV4-7 to "1110" using the QOM pin property handler and
noticed that lowering gpioV7 was inadvertently lowering gpioV4-6 too.
(qemu) qom-set /machine/soc/gpio gpioV4 true
(qemu) qom-set /machine/soc/gpio gpioV5 true
(qemu) qom-set /machine/soc/gpio gpioV6 true
(qemu) qom-get /machine/soc/gpio gpioV4
true
(qemu) qom-set /machine/soc/gpio gpioV7 false
(qemu) qom-get /machine/soc/gpio gpioV4
false
An expression in aspeed_gpio_set_pin_level was using a logical NOT
operator instead of a bitwise NOT operator:
value &= !pin_mask;
The original author probably intended to make a bitwise NOT expression
"~", but mistakenly used a logical NOT operator "!" instead. Some
programming languages like Rust use "!" for both purposes.
Fixes: 4b7f956862 ("hw/gpio: Add basic Aspeed GPIO model for AST2400 and
AST2500")
Signed-off-by: Peter Delevoryas <pdel@fb.com>
Message-Id: <20220502080827.244815-1-pdel@fb.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
This add two addition test cases for accumulative mode under sg enabled.
The input vector was manually craft with "abc" + bit 1 + padding zeros + L.
The padding length depends on algorithm, i.e. SHA512 (1024 bit),
SHA256 (512 bit).
The result was calculated by command line sha512sum/sha256sum utilities
without padding, i.e. only "abc" ascii text.
Signed-off-by: Troy Lee <troy_lee@aspeedtech.com>
Signed-off-by: Steven Lee <steven_lee@aspeedtech.com>
Acked-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Joel Stanley <joel@jms.id.au>
[ clg: checkpatch fixes ]
Message-Id: <20220426021120.28255-4-steven_lee@aspeedtech.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Add test case to test "ast1030-evb" machine with zephyr os
Signed-off-by: Troy Lee <troy_lee@aspeedtech.com>
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Signed-off-by: Steven Lee <steven_lee@aspeedtech.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20220401083850.15266-10-jamin_lin@aspeedtech.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Add simple test-case for new display-update qmp command.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@openvz.org>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20220401143936.356460-4-vsementsov@openvz.org>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
- Paolo Bonzini: thread-safety improvements to NBD client
- Vladimir Sementsov-Ogievsky: finer-grained selection of bitmaps during
nbd-export
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEccLMIrHEYCkn0vOqp6FrSiUnQ2oFAmJoUhAACgkQp6FrSiUn
Q2qnpgf/YCuONdwAndjEo7he5c1BfB/F2sujQJJ00CebUqnz5OFKQ85RwLC8DCGB
rXnxqC/NF4yyYM+6uYWDpggDd0bJVKbfG7NE/AZsEZrK+n9xMkvGLRwGqMugUii+
Px4Ba98++0giqGoAI8pU/wQZNh1I6uGabv/DPRTpwzBjbfAcATqV09OzaGiK3SRC
Zm/55zmXm1zM4XSUtUzN1gILPG09P+51m6NVkANZbzps9e2PtfFy8EsWc5+YhuBM
5K7sN+5g8GpRhz6j8RkrhrbNpvg3bGvgRJRMcW7Bo8KVUdvT1Jng6xs8CIRv39AF
jDJwGe+cq5p5PNuyqOrVSA/ynBZxBw==
=I1yM
-----END PGP SIGNATURE-----
Merge tag 'pull-nbd-2022-04-26' of https://repo.or.cz/qemu/ericb into staging
nbd patches for 2022-04-26
- Paolo Bonzini: thread-safety improvements to NBD client
- Vladimir Sementsov-Ogievsky: finer-grained selection of bitmaps during
nbd-export
# -----BEGIN PGP SIGNATURE-----
#
# iQEzBAABCAAdFiEEccLMIrHEYCkn0vOqp6FrSiUnQ2oFAmJoUhAACgkQp6FrSiUn
# Q2qnpgf/YCuONdwAndjEo7he5c1BfB/F2sujQJJ00CebUqnz5OFKQ85RwLC8DCGB
# rXnxqC/NF4yyYM+6uYWDpggDd0bJVKbfG7NE/AZsEZrK+n9xMkvGLRwGqMugUii+
# Px4Ba98++0giqGoAI8pU/wQZNh1I6uGabv/DPRTpwzBjbfAcATqV09OzaGiK3SRC
# Zm/55zmXm1zM4XSUtUzN1gILPG09P+51m6NVkANZbzps9e2PtfFy8EsWc5+YhuBM
# 5K7sN+5g8GpRhz6j8RkrhrbNpvg3bGvgRJRMcW7Bo8KVUdvT1Jng6xs8CIRv39AF
# jDJwGe+cq5p5PNuyqOrVSA/ynBZxBw==
# =I1yM
# -----END PGP SIGNATURE-----
# gpg: Signature made Tue 26 Apr 2022 01:12:00 PM PDT
# gpg: using RSA key 71C2CC22B1C4602927D2F3AAA7A16B4A2527436A
# gpg: Good signature from "Eric Blake <eblake@redhat.com>" [full]
# gpg: aka "Eric Blake (Free Software Programmer) <ebb9@byu.net>" [full]
# gpg: aka "[jpeg image of size 6874]" [full]
* tag 'pull-nbd-2022-04-26' of https://repo.or.cz/qemu/ericb:
nbd: document what is protected by the CoMutexes
nbd: take receive_mutex when reading requests[].receiving
nbd: move s->state under requests_lock
nbd: code motion and function renaming
nbd: use a QemuMutex to synchronize yanking, reconnection and coroutines
nbd: keep send_mutex/free_sema handling outside nbd_co_do_establish_connection
nbd: remove peppering of nbd_client_connected
nbd: mark more coroutine_fns
nbd: safeguard against waking up invalid coroutine
iotests/223: check new possibility of exporting bitmaps by node/name
qapi: nbd-export: allow select bitmaps by node/name pair
qapi: rename BlockDirtyBitmapMergeSource to BlockDirtyBitmapOrStr
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Add simple test that new interface introduced in previous commit works.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@openvz.org>
Message-Id: <20220314213226.362217-4-v.sementsov-og@mail.ru>
[eblake: Adjust S-o-b to Vladimir's new email, with permission]
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Add a regression test for tcg indirect global lowering.
This appeared with nios2, with cps != 0, so that we use
indirection into the shadow register set. An indirect
call verifies alignment of rA. The use of rA was live
across the brcond leading to a tcg_debug_assert failure.
Cc: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20220421151735.31996-65-richard.henderson@linaro.org>
Add runtime supporting the nios2-semi.c interface.
Execute the hello and memory multiarch tests.
Cc: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220421151735.31996-64-richard.henderson@linaro.org>
Now that threads and signals have been fixed, re-enable tests.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220421151735.31996-9-richard.henderson@linaro.org>
FUSE exports' allow-other option defaults to "auto", which means that it
will try passing allow_other as a mount option, and fall back to not
using it when an error occurs. We make no effort to hide fusermount's
error message (because it would be difficult, and because users might
want to know about the fallback occurring), and so when allow_other does
not work (primarily when /etc/fuse.conf does not contain
user_allow_other), this error message will appear and break the
reference output.
We do not need allow_other here, though, so we can just pass
allow-other=off to fix that.
Reported-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20220421142435.569600-1-hreitz@redhat.com>
Tested-by: Markus Armbruster <armbru@redhat.com>
Tested-by: Eric Blake <eblake@redhat.com>
Just like qemu_img_log(), upgrade qemu_io_log() to enforce a return code
of zero by default.
Tests that use qemu_io_log(): 242 245 255 274 303 307 nbd-reconnect-on-open
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20220418211504.943969-13-jsnow@redhat.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Like qemu-img, qemu-io returning 0 should be the norm and not the
exception. Remove all calls to qemu_io_silent that just assert the
return code is zero (That's every last call, as it turns out), and
replace them with a normal qemu_io() call.
qemu_io_silent_check() appeared to have been unused already.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20220418211504.943969-12-jsnow@redhat.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
I know we just added it, sorry. This is done in favor of qemu_io() which
*also* returns the console output and status, but with more robust error
handling on failure.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20220418211504.943969-11-jsnow@redhat.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
This test expects failure ... but only sometimes. When? Why?
It's for reads of a region not defined by a bitmap. Adjust the test to
be more explicit about what it expects to fail and why.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20220418211504.943969-10-jsnow@redhat.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Modify this test to use assertRaises for its negative testing of
qemu_io. If the exception raised does not match the one we tell it to
expect, we get *that* exception unhandled. If we get no exception, we
get a unittest assertion failure and the provided emsg printed to
screen.
If we get the CalledProcessError exception but the output is not what we
expect, we re-raise the original CalledProcessError.
Tidy.
(Note: Yes, you can reference "with" objects after that block ends; it
just means that ctx.__exit__(...) will have been called on it. It does
not *actually* go out of scope. unittests expects you to want to inspect
the Exception object, so they leave it defined post-exit.)
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Tested-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20220418211504.943969-9-jsnow@redhat.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
reimplement qemu_img() in terms of qemu_tool() in preparation for doing
the same with qemu_io().
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20220418211504.943969-7-jsnow@redhat.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Without this change, asserting that qemu_io always returns 0 causes this
test to fail in a way we happened not to be catching previously:
qemu.utils.VerboseProcessError: Command
'('/home/jsnow/src/qemu/bin/git/tests/qemu-iotests/../../qemu-io',
'--cache', 'writeback', '--aio', 'threads', '-f', 'qcow2', '-c',
'read -P 4 3M 1M',
'/home/jsnow/src/qemu/bin/git/tests/qemu-iotests/scratch/3.img')'
returned non-zero exit status 1.
┏━ output ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
┃ qemu-io: can't open device
┃ /home/jsnow/src/qemu/bin/git/tests/qemu-iotests/scratch/3.img:
┃ Could not open backing file: Could not open backing file: Throttle
┃ group 'tg' does not exist
┗━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
The commit jobs changes the backing file string stored in the image file
header belonging to the node above the commit’s top node to point to the
commit target (the base node). QEMU tries to be as accurate as
possible, and so in these test cases will include the filter that is
part of the block graph in that backing file string (by virtue of making
it a json:{} description of the post-commit subgraph). This makes
little sense outside of QEMU, though: Specifically, the throttle node in
that subgraph will dearly miss its supposedly associated throttle group
object.
When starting the commit job, we can specify a custom backing file
string to write into said image file, so let’s use that feature to write
the plain filename of the backing chain’s next actual image file there.
Explicitly provide the backing file so that opening the file outside of
QEMU (Where we will not have throttle groups) will succeed.
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20220418211504.943969-6-jsnow@redhat.com>
qemu-io fails on read/write beyond end-of-file on raw images, so skip
these invocations when running the zero-length image tests.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20220418211504.943969-5-jsnow@redhat.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
A forthcoming commit updates qemu_io() to raise an exception on non-zero
return by default, and changes its return type.
In preparation, simplify some calls to qemu_io() that assert that
specific error message strings do not appear in qemu-io's
output. Asserting that all of these calls return a status code of zero
will be a more robust way to guard against failure.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20220418211504.943969-4-jsnow@redhat.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
The 'read' commands to qemu-io were malformed, and this invocation only
worked by coincidence because the error messages were identical. Oops.
There's no point in checking the patterning of the reference image, so
just check the empty image by itself instead.
(Note: as of this commit, nothing actually enforces that this command
completes successfully, but a forthcoming commit in this series will
enforce that qemu_io() must have a zero status code.)
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20220418211504.943969-3-jsnow@redhat.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
This makes these callsites a little simpler, but the real motivation is
a forthcoming commit will change the return type of qemu_io(), so removing
users of the return value now is helpful.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20220418211504.943969-2-jsnow@redhat.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Dan: Test fixes and improvements (TLS mostly)
Peter: Postcopy improvements
Me: Race fix for info migrate, and compilation fix
V2:
Fixed checkpatch nit of unneeded NULL check
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
-----BEGIN PGP SIGNATURE-----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=M5sx
-----END PGP SIGNATURE-----
Merge tag 'pull-migration-20220421a' of https://gitlab.com/dagrh/qemu into staging
V2: Migration pull 2022-04-21
Dan: Test fixes and improvements (TLS mostly)
Peter: Postcopy improvements
Me: Race fix for info migrate, and compilation fix
V2:
Fixed checkpatch nit of unneeded NULL check
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
# -----BEGIN PGP SIGNATURE-----
#
# iQIzBAABCAAdFiEERfXHG0oMt/uXep+pBRYzHrxb/ecFAmJhpLIACgkQBRYzHrxb
# /edCPQ//dITFWStcsvon8gBBRWY/ekz/EdmWd2KFUp1r/yzopXExW5Gy+MzzTEwk
# axf7s991eyjta1gU0IYCzWcuR36LE8YsZRgDlOhttZ/674ZnX5ZIJBggwDKE/bYE
# IEHd8qsHy6oV8UIFvBQ6wvIDJmH+8gOwnPUzOO9Ek2UkSgBGsptZ8d6Hi0hTzYFB
# omhgc2eO3XQUlxM+8MwlrZU84QkxnBn2g7nVgDQyRokAou46Yf8FD/bWv3CKAdO+
# Ph+4XjBiddBFYUtf4XWSTvVfi23kij1k/4bjH3zaocE86gQ6CUteImFtowwr6N95
# sJl1EXBOtz0BP5xONqkywpWi1Qqg+mecF4KrS4XAHszaUkaj3sTFOyItwlTzZErF
# /2dZRsPRs9fTcjjzpOe/CKoGr+CcyZdxY1qbCNfHaJagdxytN2qxOaneTUbKYUE5
# n4Om9zxDS2esZCnkx26e2wylJ1wzKZBbjsoKYQA4IGaQ6Qz8Zciea0tApwhgyVjs
# KHcYtvScPLxmEEKgzDap6B7fJxyaOg3KNX+0XzLLpLS1oaeqwvSIQM/QMMrnwGxs
# uA1LI2uqlQBitaJOhgLMnNH4ze27HC3DM4OWAE+iOhpD+LNAWstjWraNNXbG4sSj
# 55ndJHJxOCjPlFY4dB/ytUbUo7XBkztCR4c1+I+lSUbMTq3KuUg=
# =M5sx
# -----END PGP SIGNATURE-----
# gpg: Signature made Thu 21 Apr 2022 11:38:42 AM PDT
# gpg: using RSA key 45F5C71B4A0CB7FB977A9FA90516331EBC5BFDE7
# gpg: Good signature from "Dr. David Alan Gilbert (RH2) <dgilbert@redhat.com>" [full]
* tag 'pull-migration-20220421a' of https://gitlab.com/dagrh/qemu:
migration: Read state once
migration: Fix operator type
migration: Allow migrate-recover to run multiple times
migration: Move channel setup out of postcopy_try_recover()
migration: Export ram_load_postcopy()
migration: Move migrate_allow_multifd and helpers into migration.c
migration: Add pss.postcopy_requested status
migration: Drop multifd tls_hostname cache
migration: Postpone releasing MigrationState.hostname
tests: expand the migration precopy helper to support failures
tests: switch migration FD passing test to use common precopy helper
tests: introduce ability to provide hooks for migration precopy test
tests: merge code for UNIX and TCP migration pre-copy tests
tests: switch MigrateStart struct to be stack allocated
migration: fix use of TLS PSK credentials with a UNIX socket
tests: print newline after QMP response in qtest logs
tests: support QTEST_TRACE env variable
tests: improve error message when saving TLS PSK file fails
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The migration precopy testing helper function always expects the
migration to run to a completion state. There will be test scenarios
for TLS where expect either the client or server to fail the migration.
This expands the helper to cope with these scenarios.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20220310171821.3724080-12-berrange@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
The combination of the start and finish hooks allow the FD passing
code to use the precopy helper
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20220310171821.3724080-11-berrange@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
There are alot of different scenarios to test with migration due to the
wide number of parameters and capabilities available. To enable sharing
of the basic precopy test scenario, we need to be able to set arbitrary
parameters and capabilities before the migration is initiated, but don't
want to have all this logic in the common helper function. Solve this
by defining two hooks that can be provided by the test case, one before
migration starts and one after migration finishes.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20220310171821.3724080-10-berrange@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
The test cases differ only in the URI they provide to the migration
commands, and the ability to set the dirty_ring mode. This code is
trivially merged into a common helper.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20220310171821.3724080-9-berrange@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
There's no compelling reason why the MigrateStart struct needs to be
heap allocated. Using stack allocation and static initializers is
simpler.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20220310171821.3724080-8-berrange@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
The QMP commands have a trailing newline, but the response does not.
This makes the qtest logs hard to follow as the next QMP command
appears in the same line as the previous QMP response.
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20220310171821.3724080-5-berrange@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
When debugging failing qtests it is useful to be able to turn on trace
output to stderr. The QTEST_TRACE env variable contents get injected
as a '-trace <str>' command line arg
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20220310171821.3724080-4-berrange@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20220310171821.3724080-3-berrange@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Now that we are fully switched over to the new QMP library, move it back
over the old namespace. This is being done primarily so that we may
upload this package simply as "qemu.qmp" without introducing confusion
over whether or not "aqmp" is a new protocol or not.
The trade-off is increased confusion inside the QEMU developer
tree. Sorry!
Note: the 'private' member "_aqmp" in legacy.py also changes to "_qmp";
not out of necessity, but just to remove any traces of the "aqmp"
name.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Beraldo Leal <bleal@redhat.com>
Acked-by: Hanna Reitz <hreitz@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@openvz.org>
Message-id: 20220330172812.3427355-8-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
iotests is already using async QMP, but to finalize the switchover we
only need to update any remaining import paths to rely solely on the new
library instead.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Beraldo Leal <bleal@redhat.com>
Acked-by: Hanna Reitz <hreitz@redhat.com>
Message-id: 20220321203315.909411-5-jsnow@redhat.com
[Fixed minor rebase conflict. --js]
Signed-off-by: John Snow <jsnow@redhat.com>
We don't have to maintain compatibility with both QMP libraries anymore,
so we can just remove the old exception. While we're here, take
advantage of the extra fields present in the VMLaunchFailure exception
that machine.py now raises.
(Note: I'm leaving the logging suppression here unchanged. I had
suggested previously we use filters to scrub the PID out of the logging
information so it could just be diffed as part of the iotest output, but
that meant *always* scrubbing PID from logger output, which defeated the
point of even offering that information in the output to begin with.
Ultimately, I decided it's fine to just suppress the logger temporarily.)
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Acked-by: Hanna Reitz <hreitz@redhat.com>
Message-id: 20220321203315.909411-4-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
../tests/qtest/fuzz/generic_fuzz.c:746:17: warning: variable 'name' set but not used [-Wunused-but-set-variable]
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20220420132624.2439741-42-marcandre.lureau@redhat.com>
This allows to make sure the test is still built, and gives more
accurate report details.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20220420132624.2439741-30-marcandre.lureau@redhat.com>
The functions are already covered in check-block-qdict.c.
This will help moving QAPI-related tests in a common subproject.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20220420132624.2439741-26-marcandre.lureau@redhat.com>
Move them where they belong, since the functions are implemented in block-qdict.c.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20220420132624.2439741-25-marcandre.lureau@redhat.com>
Do not require the whole option machinery to handle keyval, as it is
used by QAPI alone, without the option API. And match the associated
unit name.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20220420132624.2439741-24-marcandre.lureau@redhat.com>
G_NORETURN was introduced in glib 2.68, fallback to G_GNUC_NORETURN in
glib-compat.
Note that this attribute must be placed before the function declaration
(bringing a bit of consistency in qemu codebase usage).
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Warner Losh <imp@bsdimp.com>
Message-Id: <20220420132624.2439741-20-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20220321164243.200569-4-pbonzini@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
[Dead code dropped in test_visitor_in_alternate_list()]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Daniel P. Berrangé
Ben Widawsky
Jonathan Cameron
Richard Henderson
Paolo Bonzini
Eric Blake
Philippe Mathieu-Daudé
Hanna Reitz
Eric Auger
Markus Armbruster
Gavin Shan
Brad Smith
Max Filippov
Ilya Leoshkevich
David Miller
Marc-André Lureau
Peter Delevoryas
Steven Lee
Jamin Lin
Vladimir Sementsov-Ogievskiy
Vladimir Sementsov-Ogievskiy
John Snow