Change build_fs_mount_list() to return bool, in accordance
with the guidance under = Rules = in include/qapi/error.h
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Suggested-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20220525144140.591926-10-marcandre.lureau@redhat.com>
qemu_open_old() uses qemu_open_internal() which handles special
"/dev/fdset/" path for monitor fd sets, set CLOEXEC, and uses Error
reporting (and some O_DIRECT special error casing).
The monitor fdset handling is unnecessary for qga, use
qga_open_cloexec() instead.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Konstantin Kostiuk <kkostiuk@redhat.com>
Message-Id: <20220525144140.591926-9-marcandre.lureau@redhat.com>
The function takes care of setting CLOEXEC.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20220525144140.591926-7-marcandre.lureau@redhat.com>
There is a bit too much nesting in the function, this can be simplified
a bit to improve readability.
This also helps with the following error handling changes.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20220525144140.591926-5-marcandre.lureau@redhat.com>
Add a new 'guest-get-diskstats' command for report disk io statistics
for Linux guests. This can be useful for getting io flow or handling
IO fault, no need to enter guests.
Signed-off-by: luzhipeng <luzhipeng@cestc.cn>
Message-Id: <20220520021935.676-1-luzhipeng@cestc.cn>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Konstantin Kostiuk <kkostiuk@redhat.com>
Signed-off-by: Konstantin Kostiuk <kkostiuk@redhat.com>
After assigning a NVMe/SCSI controller to guest by VFIO, we lose
everything on the host side. A guest uses these devices exclusively,
we usually don't care the actions on these devices. But there is a
low probability that hitting physical hardware warning, we need a
chance to get the basic smart log info.
Introduce disk smart, and implement NVMe smart on linux.
Thanks to Keith and Marc-André.
CC: Keith Busch <kbusch@kernel.org>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: zhenwei pi <pizhenwei@bytedance.com>
Message-Id: <20220420022610.418052-3-pizhenwei@bytedance.com>
Assigning a NVMe disk by VFIO or emulating a NVMe controller by QEMU,
a NVMe disk get exposed in guest side. Support NVMe disk bus type and
implement posix version.
Test PCI passthrough case:
~#virsh qemu-agent-command buster '{"execute":"guest-get-disks"}' | jq
...
{
"name": "/dev/nvme0n1",
"dependencies": [],
"partition": false,
"address": {
"serial": "SAMSUNG MZQL23T8HCLS-00A07_S64HNE0N500076",
"bus-type": "nvme",
"bus": 0,
"unit": 0,
"pci-controller": {
"bus": 0,
"slot": 22,
"domain": 0,
"function": 0
},
"dev": "/dev/nvme0n1",
"target": 0
}
...
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: zhenwei pi <pizhenwei@bytedance.com>
Message-Id: <20220420022610.418052-2-pizhenwei@bytedance.com>
On Solaris, instead of the -P, -H, and -r flags, we need to provide
the target init state to the 'shutdown' command: state 5 is poweroff,
0 is halt, and 6 is reboot. We also need to pass -g0 to avoid the
default 60-second delay, and -y to avoid a confirmation prompt.
Implement this logic under an #ifdef CONFIG_SOLARIS, so the
'guest-shutdown' command works properly on Solaris.
Signed-off-by: Andrew Deason <adeason@sinenomine.net>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20220426195526.7699-6-adeason@sinenomine.net>
guest_get_network_stats can silently fail in a couple of ways. Add
debug messages to these cases, so we're never completely silent on
failure.
Signed-off-by: Andrew Deason <adeason@sinenomine.net>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20220426195526.7699-5-adeason@sinenomine.net>
The code for guest-network-get-interfaces needs a couple of small
adjustments for Solaris:
- The results from SIOCGIFHWADDR are documented as being in ifr_addr,
not ifr_hwaddr (ifr_hwaddr doesn't exist on Solaris).
- The implementation of guest_get_network_stats is Linux-specific, so
hide it under #ifdef CONFIG_LINUX. On non-Linux, we just won't
provide network interface stats.
Signed-off-by: Andrew Deason <adeason@sinenomine.net>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Message-Id: <20220426195526.7699-4-adeason@sinenomine.net>
Since its introduction in commit 3424fc9f16 ("qemu-ga: add
guest-network-get-interfaces command"), guest-network-get-interfaces
seems to check if a given interface has a hardware address by checking
'ifa->ifa_flags & SIOCGIFHWADDR'. But ifa_flags is a field for IFF_*
flags (IFF_UP, IFF_LOOPBACK, etc), and comparing it to an ioctl like
SIOCGIFHWADDR doesn't make sense.
On Linux, this isn't a big deal, since SIOCGIFHWADDR has so many bits
set (0x8927), 'ifa->ifa_flags & SIOCGIFHWADDR' will usually have a
nonzero result for any 'normal'-looking interfaces: anything with
IFF_UP (0x1) or IFF_BROADCAST (0x2) set, as well as several
less-common flags. This means we'll try to get the hardware address
for most/all interfaces, even those that don't really have one (like
the loopback device). For those interfaces, Linux just returns a
hardware address of all zeroes.
On Solaris, however, trying to get the hardware address for a loopback
device returns an EADDRNOTAVAIL error. This causes us to return an
error and the entire guest-network-get-interfaces call fails.
Change this logic to always try to get the hardware address for each
interface, and don't return an error if we fail to get it. Instead,
just don't include the 'hardware-address' field in the result if we
can't get the hardware address.
Signed-off-by: Andrew Deason <adeason@sinenomine.net>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Message-Id: <20220426195526.7699-3-adeason@sinenomine.net>
Currently, commands-posix.c assumes that getifaddrs() is only
available on Linux, and so the related guest agent command
guest-network-get-interfaces is only implemented for #ifdef __linux__.
This function does exist on other platforms, though, such as Solaris.
So, add a meson check for getifaddrs(), and move the code for
guest-network-get-interfaces to be built whenever getifaddrs() is
available.
The implementation for guest-network-get-interfaces still has some
Linux-specific code, which is not fixed in this commit. This commit
moves the relevant big chunks of code around without changing them, so
a future commit can change the code in place.
Signed-off-by: Andrew Deason <adeason@sinenomine.net>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Message-Id: <20220426195526.7699-2-adeason@sinenomine.net>
The call is POSIX-specific. Use the dedicated GLib API.
(this is a preliminary patch before renaming qemu_set_nonblock())
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Suggested-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
The function is specific to qemu-ga, no need to share it in QEMU.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Konstantin Kostiuk <kkostiuk@redhat.com>
Message-Id: <20220420132624.2439741-32-marcandre.lureau@redhat.com>
Environment is implicitly inherited from the current process "environ"
variable for execl() or g_spawn_sync(), no need to be explicit about it.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220323155743.1585078-31-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
GLib g_get_real_time() is an alternative to gettimeofday() which allows
to simplify our code.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20220307070401.171986-4-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Commit 54aa3de72 ("qapi: Use QAPI_LIST_PREPEND() where possible")
inadvertently removed the has_dependencies from the partition disk
info, resulting in empty list being returned.
Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=1950833
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-id: 20210420125831.233092-1-marcandre.lureau@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reported-by: Euler Robot <euler.robot@huawei.com>
Signed-off-by: AlexChen <alex.chen@huawei.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
*fix 80+ char violation while we're here
*fix w32 build breakage from changing INVALID_SET_FILE_POINTER
definition from a cast to a subtraction
Signed-off-by: Michael Roth <michael.roth@amd.com>
I found another spot that can benefit from using our macros instead of
open-coding qapi list creation.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20210205171634.1491258-1-eblake@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
These cases require a bit more thought to review; in each case, the
code was appending to a list, but not with a FOOList **tail variable.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20210113221013.390592-6-eblake@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
[Flawed change to qmp_guest_network_get_interfaces() dropped]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
The easiest spots to use QAPI_LIST_APPEND are where we already have an
obvious pointer to the tail of a list. While at it, consistently use
the variable name 'tail' for that purpose.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20210113221013.390592-5-eblake@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
- enhance the s390 devices acceptance test
- tcg: improve carry computation
- qga: send the ccw address with the fsinfo data
- fixes for protected virtualisation and zpci
-----BEGIN PGP SIGNATURE-----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=X/jY
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/cohuck-gitlab/tags/s390x-20201222' into staging
Further s390x updates:
- enhance the s390 devices acceptance test
- tcg: improve carry computation
- qga: send the ccw address with the fsinfo data
- fixes for protected virtualisation and zpci
# gpg: Signature made Tue 22 Dec 2020 10:37:34 GMT
# gpg: using RSA key C3D0D66DC3624FF6A8C018CEDECF6B93C6F02FAF
# gpg: issuer "cohuck@redhat.com"
# gpg: Good signature from "Cornelia Huck <conny@cornelia-huck.de>" [unknown]
# gpg: aka "Cornelia Huck <huckc@linux.vnet.ibm.com>" [full]
# gpg: aka "Cornelia Huck <cornelia.huck@de.ibm.com>" [full]
# gpg: aka "Cornelia Huck <cohuck@kernel.org>" [unknown]
# gpg: aka "Cornelia Huck <cohuck@redhat.com>" [unknown]
# Primary key fingerprint: C3D0 D66D C362 4FF6 A8C0 18CE DECF 6B93 C6F0 2FAF
* remotes/cohuck-gitlab/tags/s390x-20201222:
tests/acceptance: Add a test with the Fedora 31 kernel and initrd
s390x/pci: Fix memory_region_access_valid call
s390x/pci: fix pcistb length
tests/acceptance: Test the virtio-balloon device on s390x
tests/acceptance: Test virtio-rng on s390 via /dev/hwrng
tests/acceptance: Extract the code to clear dmesg and wait for CRW reports
tests/acceptance: test hot(un)plug of ccw devices
target/s390x: Improve SUB LOGICAL WITH BORROW
target/s390x: Improve cc computation for SUBTRACT LOGICAL
target/s390x: Improve ADD LOGICAL WITH CARRY
target/s390x: Improve cc computation for ADD LOGICAL
qga/commands-posix: Send CCW address on s390x with the fsinfo data
MAINTAINERS: move my git tree to gitlab
s390x: pv: Fence additional unavailable SCLP facilities for PV guests
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
We need the CCW address on the libvirt side to correctly identify
the disk, so add this information to the GuestDiskAddress on s390x.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Michael Roth <michael.roth@amd.com>
Message-Id: <20201127082353.448251-1-thuth@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Anywhere we create a list of just one item or by prepending items
(typically because order doesn't matter), we can use
QAPI_LIST_PREPEND(). But places where we must keep the list in order
by appending remain open-coded until later patches.
Note that as a side effect, this also performs a cleanup of two minor
issues in qga/commands-posix.c: the old code was performing
new = g_malloc0(sizeof(*ret));
which 1) is confusing because you have to verify whether 'new' and
'ret' are variables with the same type, and 2) would conflict with C++
compilation (not an actual problem for this file, but makes
copy-and-paste harder).
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20201113011340.463563-5-eblake@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
[Straightforward conflicts due to commit a8aa94b5f8 "qga: update
schema for guest-get-disks 'dependents' field" and commit a10b453a52
"target/mips: Move mips_cpu_add_definition() from helper.c to cpu.c"
resolved. Commit message tweaked.]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
The recently-added 'guest-get-disk' command returns a list of
GuestDiskInfo entries, which in turn have a 'dependents' field which
lists devices these entries are dependent upon. Thus, 'dependencies'
is a better name for this field. Address this by renaming the field
accordingly.
Additionally, 'dependents' is specified as non-optional, even though
it's not implemented for w32. This is misleading, since it gives users
the impression that a particular disk might not have dependencies,
when in reality that information is simply not known to the guest
agent. Address this by making 'dependents' an optional field, and only
marking it as in-use when the facilities to obtain this information are
available to the guest agent.
Cc: Eric Blake <eblake@redhat.com>
Cc: Tomáš Golembiovský <tgolembi@redhat.com>
Cc: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Michael Roth <michael.roth@amd.com>
We opendir("/sys/block") at the beginning of the function, but we never
close it prior to returning.
Fixes: Coverity CID 1436130
Fixes: fed3956429 ("qga: add implementation of guest-get-disks for Linux")
Reported-by: Peter Maydell <peter.maydell@linaro.org>
Cc: Marc-André Lureau <marcandre.lureau@redhat.com>
Cc: Tomáš Golembiovský <tgolembi@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Michael Roth <michael.roth@amd.com>
The command lists all disks (real and virtual) as well as disk
partitions. For each disk the list of dependent disks is also listed and
/dev path is used as a handle so it can be matched with "name" field of
other returned disk entries. For disk partitions the "dependents" list
is populated with the the parent device for easier tracking of
hierarchy.
Example output:
{
"return": [
...
{
"name": "/dev/dm-0",
"partition": false,
"dependents": [
"/dev/sda2"
],
"alias": "luks-7062202e-5b9b-433e-81e8-6628c40da9f7"
},
{
"name": "/dev/sda2",
"partition": true,
"dependents": [
"/dev/sda"
]
},
{
"name": "/dev/sda",
"partition": false,
"address": {
"serial": "SAMSUNG_MZ7LN512HCHP-000L1_S1ZKNXAG822493",
"bus-type": "sata",
...
"dev": "/dev/sda",
"target": 0
},
"dependents": []
},
...
]
}
Signed-off-by: Tomáš Golembiovský <tgolembi@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
*add missing stub for !defined(CONFIG_FSFREEZE)
*remove unused deps_dir variable
Signed-off-by: Michael Roth <michael.roth@amd.com>
Add API and stubs for new guest-get-disks command.
The command guest-get-fsinfo can be used to list information about disks
and partitions but it is limited only to mounted disks with filesystem.
This new command should allow listing information about disks of the VM
regardles whether they are mounted or not. This can be usefull for
management applications for mapping virtualized devices or pass-through
devices to device names in the guest OS.
Signed-off-by: Tomáš Golembiovský <tgolembi@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Michael Roth <michael.roth@amd.com>
We want to introduce a new version of qemu_open() that uses an Error
object for reporting problems and make this it the preferred interface.
Rename the existing method to release the namespace for the new impl.
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Add command for reporting devices on Windows guest. The intent is not so
much to report the devices but more importantly the driver (and its
version) that is assigned to the device. This gives caller the
information whether VirtIO drivers are installed and/or whether
inadequate driver is used on a device (e.g. QXL device with base VGA
driver).
Example:
[
{
"driver-date": "2019-08-12",
"driver-name": "Red Hat VirtIO SCSI controller",
"driver-version": "100.80.104.17300",
"address": {
"type": "pci",
"data": {
"device-id": 4162,
"vendor-id": 6900
}
}
},
...
]
Signed-off-by: Tomáš Golembiovský <tgolembi@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
*remove redundant glib autoptr declaration for GuestDeviceInfo
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
QEMU on s390x uses virtio via channel I/O instead of PCI by default.
Add a function to detect and provide information for virtio-scsi and
virtio-block devices here, too.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
The libudev-related code is independent from the other pci-related code
and can be re-used for non-pci devices (like ccw devices on s390x). Thus
move this part to the generic function.
Buglink: https://bugzilla.redhat.com/show_bug.cgi?id=1755075
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
We are going to support non-PCI devices soon. For this we need to split
the generic GuestDiskAddress and GuestDiskAddressList memory allocation
and list chaining into a separate function first.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
When all we do with an Error we receive into a local variable is
propagating to somewhere else, we can just as well receive it there
right away. The previous two commits did that for sufficiently simple
cases with Coccinelle. Do it for several more manually.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20200707160613.848843-37-armbru@redhat.com>
transfer_memory_block() leaks an Error object when reading file
/sys/devices/system/memory/memory<INDEX>/state fails with errno other
than ENOENT, and @sys2memblk is false, i.e. when the state file exists
but cannot be read (seems quite unlikely), and this is
guest-set-memory-blocks, not guest-get-memory-blocks.
Plug the leak.
Fixes: bd240fca42
Cc: Michael Roth <mdroth@linux.vnet.ibm.com>
Cc: Hailiang Zhang <zhang.zhanghailiang@huawei.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Message-Id: <20200630090351.1247703-9-armbru@redhat.com>
The Error ** argument must be NULL, &error_abort, &error_fatal, or a
pointer to a variable containing NULL. Passing an argument of the
latter kind twice without clearing it in between is wrong: if the
first call sets an error, it no longer points to NULL for the second
call.
qmp_guest_get_memory_blocks() passes &local_err to
transfer_memory_block() in a loop. If this fails in more than one
iteration, it can trip error_setv()'s assertion.
Fix it to break the loop.
Cc: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20200422130719.28225-14-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Extract the common code shared by both POSIX/Win32 implementations.
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
As we are going to reuse this method, declare it in common
header.
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
local_err is used several times in guest_suspend(). Setting non-NULL
local_err will crash, so let's zero it after freeing. Also fix possible
leak of local_err in final if().
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20200324153630.11882-7-vsementsov@virtuozzo.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20191205174635.18758-13-vsementsov@virtuozzo.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
build_guest_fsinfo_for_virtual_device() dereferences @errp when
build_guest_fsinfo_for_device() fails. That's wrong; see the big
comment in error.h. Introduced in commit 46d4c5723e "qga: Add
guest-get-fsinfo command".
No caller actually passes null.
Fix anyway: splice in a local Error *err, and error_propagate().
Cc: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20191204093625.14836-10-armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
The Posix implementation of guest-set-time invokes hwclock to
set/retrieve the time to/from the hardware clock. If hwclock
is not available, the user is currently informed that "hwclock
failed to set hardware clock to system time", which is quite
misleading. This may happen e.g. on s390x, which has a different
timekeeping concept anyway.
Let's check for the availability of the hwclock command and
return QERR_UNSUPPORTED for guest-set-time if it is not available.
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Message-Id: <20191205115350.18713-1-cohuck@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Memory block commands are only supported for linux with sysfs,
"guest-get-memory-block-info" was not in blacklist for other
cases.
Reported on:
https://bugzilla.redhat.com/show_bug.cgi?id=1751431
Signed-off-by: Basil Salman <bsalman@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
No header includes qemu-common.h after this commit, as prescribed by
qemu-common.h's file comment.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190523143508.25387-5-armbru@redhat.com>
[Rebased with conflicts resolved automatically, except for
include/hw/arm/xlnx-zynqmp.h hw/arm/nrf51_soc.c hw/arm/msf2-soc.c
block/qcow2-refcount.c block/qcow2-cluster.c block/qcow2-cache.c
target/arm/cpu.h target/lm32/cpu.h target/m68k/cpu.h target/mips/cpu.h
target/moxie/cpu.h target/nios2/cpu.h target/openrisc/cpu.h
target/riscv/cpu.h target/tilegx/cpu.h target/tricore/cpu.h
target/unicore32/cpu.h target/xtensa/cpu.h; bsd-user/main.c and
net/tap-bsd.c fixed up]
Report device node of the disk on Linux (e.g. "/dev/sda2").
Requirs libudev.
Signed-off-by: Tomáš Golembiovský <tgolembi@redhat.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Marc-André Lureau
luzhipeng
zhenwei pi
Andrew Deason
AlexChen
Lin Ma
Eric Blake
Peter Maydell
Thomas Huth
Michael Roth
Tomáš Golembiovský
Daniel P. Berrangé
Markus Armbruster
Philippe Mathieu-Daudé
Vladimir Sementsov-Ogievskiy
Cornelia Huck
Basil Salman
Paolo Bonzini