Test 297 in tests/qemu-iotests currently fails: pylint has
learned new things to check, or we simply missed them.
All fixes in this patch are related to additional spaces used
or wrong indentation. No functional change intended.
Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Message-Id: <20211008062821.1010967-2-eesposit@redhat.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Right now, this does not change anything, because backup ignores
max-chunk and max-workers. However, as soon as backup is switched over
to block-copy for the background copying process, we will need it to
keep 129 passing.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20210120102043.28346-1-mreitz@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
And consequentially drop it from 297's skip list.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Willian Rampazzo <willianr@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20210118105720.14824-10-mreitz@redhat.com>
Issuing 'stop' on the VM drains all nodes. If the mirror job has many
large requests in flight, this may lead to significant I/O that looks a
bit like 'stop' would make the job try to complete (which is what 129
should verify not to happen).
We can limit the I/O in flight by limiting the buffer size, so mirror
will make very little progress during the 'stop' drain.
(We do not need to do anything about commit, which has a buffer size of
512 kB by default; or backup, which goes cluster by cluster. Once we
have asynchronous requests for backup, that will change, but then we can
fine-tune the backup job to only perform a single request on a very
small chunk, too.)
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Willian Rampazzo <willianr@redhat.com>
Message-Id: <20210118105720.14824-9-mreitz@redhat.com>
Before this patch, test_block_commit() performs an active commit, which
under the hood is a mirror job. If we want to test various different
block jobs, we should perhaps run an actual commit job instead.
Doing so requires adding an overlay above the source node before the
commit is done (and then specifying the source node as the top node for
the commit job).
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Willian Rampazzo <willianr@redhat.com>
Message-Id: <20210118105720.14824-8-mreitz@redhat.com>
Throttling on the BB has not affected block jobs in a while, so it is
possible that one of the jobs in 129 finishes before the VM is stopped.
We can fix that by running the job from a throttle node.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Willian Rampazzo <willianr@redhat.com>
Message-Id: <20210118105720.14824-7-mreitz@redhat.com>
@busy is false when the job is paused, which happens all the time
because that is how jobs yield (e.g. for mirror at least since commit
565ac01f8d).
Back when 129 was added (2015), perhaps there was no better way of
checking whether the job was still actually running. Now we have the
@status field (as of 58b295ba52, i.e. 2018), which can give us exactly
that information.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Willian Rampazzo <willianr@redhat.com>
Message-Id: <20210118105720.14824-6-mreitz@redhat.com>
We are going to drop group file. Define group in tests as a preparatory
step.
The patch is generated by
cd tests/qemu-iotests
grep '^[0-9]\{3\} ' group | while read line; do
file=$(awk '{print $1}' <<< "$line");
groups=$(sed -e 's/^... //' <<< "$line");
awk "NR==2{print \"# group: $groups\"}1" $file > tmp;
cat tmp > $file;
done
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20210116134424.82867-7-vsementsov@virtuozzo.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
There are many existing qcow2 images that specify a backing file but
no format. This has been the source of CVEs in the past, but has
become more prominent of a problem now that libvirt has switched to
-blockdev. With older -drive, at least the probing was always done by
qemu (so the only risk of a changed format between successive boots of
a guest was if qemu was upgraded and probed differently). But with
newer -blockdev, libvirt must specify a format; if libvirt guesses raw
where the image was formatted, this results in data corruption visible
to the guest; conversely, if libvirt guesses qcow2 where qemu was
using raw, this can result in potential security holes, so modern
libvirt instead refuses to use images without explicit backing format.
The change in libvirt to reject images without explicit backing format
has pointed out that a number of tools have been far too reliant on
probing in the past. It's time to set a better example in our own
iotests of properly setting this parameter.
iotest calls to create, rebase, and convert are all impacted to some
degree. It's a bit annoying that we are inconsistent on command line
- while all of those accept -o backing_file=...,backing_fmt=..., the
shortcuts are different: create and rebase have -b and -F, while
convert has -B but no -F. (amend has no shortcuts, but the previous
patch just deprecated the use of amend to change backing chains).
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20200706203954.341758-9-eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Use the program search path to find the Python 3 interpreter.
Patch created mechanically by running:
$ sed -i "s,^#\!/usr/bin/\(env\ \)\?python$,#\!/usr/bin/env python3," \
$(git grep -l 'if __name__.*__main__')
Reported-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Suggested-by: Daniel P. Berrangé <berrange@redhat.com>
Suggested-by: Stefan Hajnoczi <stefanha@redhat.com>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20200130163232.10446-4-philmd@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Most of our Python unittest-style tests only support the file protocol.
You can run them with any other protocol, but the test will simply
ignore your choice and use file anyway.
We should let them signal that they require the file protocol so they
are skipped when you want to test some other protocol.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The majority of our iotests have the executable bit set; fix the
few outliers for consistency.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-id: 20180305161824.7188-1-eblake@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Message-id: 1428069921-2957-4-git-send-email-famz@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Emanuele Giuseppe Esposito
Max Reitz
Vladimir Sementsov-Ogievskiy
Eric Blake
Philippe Mathieu-Daudé
Fam Zheng