qcow2_do_open() is checking that header.refcount_table_clusters is not
too large, but it doesn't check that it's greater than zero. Apart
from the fact that an image like that is obviously corrupted, trying
to use it crashes QEMU since we end up with a null s->refcount_table
after qcow2_refcount_init().
These images can however be repaired, so allow opening them if the
BDRV_O_CHECK flag is set.
Signed-off-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: f9750f50c80359babba11062e88f5075a47e8e16.1509718618.git.berto@igalia.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
If the refcount data is corrupted then we can end up trying to
allocate a new compressed cluster at offset 0 in the image, triggering
an assertion in qcow2_alloc_bytes() that would crash QEMU:
qcow2_alloc_bytes: Assertion `offset' failed.
This patch adds an explicit check for this scenario and a new test
case.
Signed-off-by: Alberto Garcia <berto@igalia.com>
Message-id: fb53467cf48e95ff3330def1cf1003a5b862b7d9.1509718618.git.berto@igalia.com
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
If the refcount data is corrupted then we can end up trying to
allocate a new L2 table at offset 0 in the image, triggering an
assertion in the qcow2 cache that would crash QEMU:
qcow2_cache_entry_mark_dirty: Assertion `c->entries[i].offset != 0' failed
This patch adds an explicit check for this scenario and a new test
case.
Signed-off-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 92dac37191ae7844a2da22c122204eb493cc3133.1509718618.git.berto@igalia.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Each entry in the qcow2 cache contains an offset field indicating the
location of the data in the qcow2 image. If the offset is 0 then it
means that the entry contains no data and is available to be used when
needed.
Because of that it is not possible to store in the cache the first
cluster of the qcow2 image (offset = 0). This is not a problem because
that cluster always contains the qcow2 header and we're not using this
cache for that.
However, if the qcow2 image is corrupted it can happen that we try to
allocate a new refcount block at offset 0, triggering this assertion
and crashing QEMU:
qcow2_cache_entry_mark_dirty: Assertion `c->entries[i].offset != 0' failed
This patch adds an explicit check for this scenario and a new test
case.
This problem was originally reported here:
https://bugs.launchpad.net/qemu/+bug/1728615
Reported-by: R.Nageswara Sastry <nasastry@in.ibm.com>
Signed-off-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 92a2fadd10d58b423f269c1d1a309af161cdc73f.1509718618.git.berto@igalia.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Most callback commands in qemu-io return 0 to keep the interpreter
loop running, or 1 to quit immediately. However, open_f() just
passed through the return value of openfile(), which has different
semantics of returning 0 if a file was opened, or 1 on any failure.
As a result of mixing the return semantics, we are forcing the
qemu-io interpreter to exit early on any failures, which is rather
annoying when some of the failures are obviously trying to give
the user a hint of how to proceed (if we didn't then kill qemu-io
out from under the user's feet):
$ qemu-io
qemu-io> open foo
qemu-io> open foo
file open already, try 'help close'
$ echo $?
0
In general, we WANT openfile() to report failures, since it is the
function used in the form 'qemu-io -c "$something" no_such_file'
for performing one or more -c options on a single file, and it is
not worth attempting $something if the file itself cannot be opened.
So the solution is to fix open_f() to always return 0 (when we are
in interactive mode, even failure to open should not end the
session), and save the return value of openfile() for command line
use in main().
Note, however, that we do have some qemu-iotests that do 'qemu-io
-c "open file" -c "$something"'; such tests will now proceed to
attempt $something whether or not the open succeeded, the same way
as if the two commands had been attempted in interactive mode. As
such, the expected output for those tests has to be modified. But it
also means that it is now possible to use -c close and have a single
qemu-io command line operate on more than one file even without
using interactive mode. Although the '-c open' action is a subtle
change in behavior, remember that qemu-io is for debugging purposes,
so as long as it serves the needs of qemu-iotests while still being
reasonable for interactive use, it should not be a problem that we
are changing tests to the new behavior.
This has been awkward since at least as far back as commit
e3aff4f, in 2009.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
When converting a 1.1 image down to 0.10, qemu-iotests 060 forces
a contrived failure where allocating a cluster used to replace a
zero cluster reads unaligned data. Since it is a zero cluster
rather than a data cluster being converted, changing the error
message to match our earlier change in 'qcow2: Make distinction
between zero cluster types obvious' is worthwhile.
Suggested-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-id: 20170508171302.17805-1-eblake@redhat.com
[mreitz: Commit message fixes]
Signed-off-by: Max Reitz <mreitz@redhat.com>
Treat plain zero clusters differently from allocated ones, so that
we can simplify the logic of checking whether an offset is present.
Do this by splitting QCOW2_CLUSTER_ZERO into two new enums,
QCOW2_CLUSTER_ZERO_PLAIN and QCOW2_CLUSTER_ZERO_ALLOC.
I tried to arrange the enum so that we could use
'ret <= QCOW2_CLUSTER_ZERO_PLAIN' for all unallocated types, and
'ret >= QCOW2_CLUSTER_ZERO_ALLOC' for allocated types, although
I didn't actually end up taking advantage of the layout.
In many cases, this leads to simpler code, by properly combining
cases (sometimes, both zero types pair together, other times,
plain zero is more like unallocated while allocated zero is more
like normal).
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-id: 20170507000552.20847-7-eblake@redhat.com
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Just three instances left.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <1450452927-8346-16-git-send-email-armbru@redhat.com>
Add the bit width of every refcount entry to the format-specific
information.
In contrast to lazy_refcounts and the corrupt flag, this should be
always emitted, even for compat=0.10 although it does not support any
refcount width other than 16 bits. This is because if a boolean is
optional, one normally assumes it to be false when omitted; but if an
integer is not specified, it is rather difficult to guess its value.
This new field breaks some test outputs, fix them.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This is simply:
$ cd tests/qemu-iotests; sed -i -e 's/ *$//' *.out
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-id: 1418110684-19528-2-git-send-email-famz@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The real on-disk size of an image depends on things like the host
filesystem. _img_info already filters it out, use the function in 060.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Michael Mueller <mimu@linux.vnet.ibm.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
039, 060 and 061 all create images with referenced clusters having a
refcount of 0. Because previous commits changed handling of such errors,
these tests now have a different output. Fix it.
Furthermore, 060 created a refblock with a refcount greater than one
which now results in having to rebuild the refcount structure as well.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The "corrupt" entry in the format-specific information section should be
"true".
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 1412105489-7681-4-git-send-email-mreitz@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Add tests for unaligned L1/L2/reftable entries and non-fatal corruption
reports.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 1409926039-29044-6-git-send-email-mreitz@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Use the new function in case of a failed overlap check.
This changes output in case of corruption, so adapt iotest 060's
reference output accordingly.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Benoît Canet <benoit.canet@nodalink.com>
Message-id: 1409926039-29044-4-git-send-email-mreitz@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Add a test for an image with an unallocated image header; instead of an
assertion, this should result in the image being marked corrupt.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Extend test file 060 by a test case for corruption occuring concurrently
to a COW request. QEMU should not crash but rather return an appropriate
error message.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Extend 060 by a test which creates a corrupted image with an active L2
entry pointing to an inactive L2 table and writes to the corresponding
guest offset.
Also, use overlap-check=all for all tests in 060.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
When opening/creating images, propagating errors instead of immediately
emitting them on occurrence results in errors generally being printed on
a single line rather than being split up into multiple ones. This in
turn requires adjustments to some test results.
Also, test 060 used a sed to filter out the test image directory and
format by removing everything from the affected line after a certain
keyword; this now also removes the error message itself, which can be
fixed by using _filter_testdir and _filter_imgfmt.
Finally, _make_test_img in common.rc did not filter out the test image
directory etc. from stderr. This has been fixed through a redirection of
stderr to stdout (which is already done in _check_test_img and
_img_info).
Signed-off-by: Max Reitz <mreitz@redhat.com>
A new test on corrupted images with overlapping cluster allocations.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>