Commit Graph

62 Commits

Author SHA1 Message Date
Artem Pisarenko e81f86790f qemu-timer: avoid checkpoints for virtual clock timers in external subsystems
Adds EXTERNAL attribute definition to qemu timers subsystem and assigns
it to virtual clock timers, used in slirp (ICMP IPv6) and ui (key queue).
Virtual clock processing in rr mode can use this attribute instead of a
separate clock type.

Fixes: 87f4fe7653
Fixes: 775a412bf8
Fixes: 9888091404
Signed-off-by: Artem Pisarenko <artem.k.pisarenko@gmail.com>
Message-Id: <e771f96ab94e86b54b9a783c974f2af3009fe5d1.1539764043.git.artem.k.pisarenko@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-10-19 13:44:03 +02:00
Artem Pisarenko 05ff8dc32f Revert some patches from recent [PATCH v6] "Fixing record/replay and adding reverse debugging"
That patch series introduced new virtual clock type for use in external
subsystems. It breaks desired behavior in non-record/replay usage
scenarios due to a small change to existing behavior.  Processing of
virtual timers belonging to new clock type is kicked off to the main
loop, which makes these timers asynchronous with vCPU thread and,
in icount mode, with whole guest execution. This breaks expected
determinism in non-record/replay icount mode of emulation where these
"external subsystems" are isolated from the host (i.e. they are
external only to guest core, not to the entire emulation environment).

Example for slirp ("user" backend for network device):
User runs qemu in icount mode with rtc clock=vm without any external
communication interfaces but with "-netdev user,restrict=on". It expects
deterministic execution, because network services are emulated inside
qemu and isolated from host. There are no reasons to get reply from DHCP
server with different delay or something like that.

The next patches revert reimplements the same changes in a better way.
This reverts commit 87f4fe7653.
This reverts commit 775a412bf8.
This reverts commit 9888091404.

Signed-off-by: Artem Pisarenko <artem.k.pisarenko@gmail.com>
Message-Id: <18b1e7c8f155fe26976f91be06bde98eef6f8751.1539764043.git.artem.k.pisarenko@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-10-19 13:44:03 +02:00
Pavel Dovgalyuk 9888091404 ui: fix virtual timers
UI uses timers based on virtual clock for managing key queue.
This is incorrect because this service is not related to the guest state,
and its events should not be recorded and replayed. But these timers should
stop when the guest is not executing.
This patch changes using virtual clock to the new virtual_ext clock,
which runs as virtual clock, but its timers are not saved to the log.

Signed-off-by: Pavel Dovgalyuk <Pavel.Dovgaluk@ispras.ru>
Message-Id: <20180912082013.3228.33664.stgit@pasha-VirtualBox>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-10-02 19:08:59 +02:00
Markus Armbruster 9af2398977 Include less of the generated modular QAPI headers
In my "build everything" tree, a change to the types in
qapi-schema.json triggers a recompile of about 4800 out of 5100
objects.

The previous commit split up qmp-commands.h, qmp-event.h, qmp-visit.h,
qapi-types.h.  Each of these headers still includes all its shards.
Reduce compile time by including just the shards we actually need.

To illustrate the benefits: adding a type to qapi/migration.json now
recompiles some 2300 instead of 4800 objects.  The next commit will
improve it further.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20180211093607.27351-24-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
[eblake: rebase to master]
Signed-off-by: Eric Blake <eblake@redhat.com>
2018-03-02 13:45:50 -06:00
Markus Armbruster 452fcdbc49 Include qapi/qmp/qdict.h exactly where needed
This cleanup makes the number of objects depending on qapi/qmp/qdict.h
drop from 4550 (out of 4743) to 368 in my "build everything" tree.
For qapi/qmp/qobject.h, the number drops from 4552 to 390.

While there, separate #include from file comment with a blank line.

Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20180201111846.21846-13-armbru@redhat.com>
2018-02-09 13:52:15 +01:00
Markus Armbruster e688df6bc4 Include qapi/error.h exactly where needed
This cleanup makes the number of objects depending on qapi/error.h
drop from 1910 (out of 4743) to 1612 in my "build everything" tree.

While there, separate #include from file comment with a blank line,
and drop a useless comment on why qemu/osdep.h is included first.

Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20180201111846.21846-5-armbru@redhat.com>
[Semantic conflict with commit 34e304e975 resolved, OSX breakage fixed]
2018-02-09 13:50:17 +01:00
Markus Armbruster 522ece32d2 Drop superfluous includes of qapi-types.h and test-qapi-types.h
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20180201111846.21846-4-armbru@redhat.com>
2018-02-09 05:05:11 +01:00
linzhecheng fca4774a96 input: fix memory leak
If kbd_queue is not empty and queue_count >= queue_limit,
we should free evt.

Change-Id: Ieeacf90d5e7e370a40452ec79031912d8b864d83
Signed-off-by: linzhecheng <linzhecheng@huawei.com>
Message-id: 20171225023730.5512-1-linzhecheng@huawei.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2018-01-12 14:20:39 +01:00
Daniel P. Berrange 80b857f0c6 ui: normalize the 'sysrq' key into the 'print' key
The 'sysrq' key was mistakenly added to QEMU to deal with incorrect handling
of the 'print' key in the ps2 device:

  commit f2289cb692
  Author: balrog <balrog@c046a42c-6fe2-441c-8c8c-71466251a162>
  Date:   Wed Jun 4 10:14:16 2008 +0000

    Add sysrq to key names known by "sendkey".

    Adding sysrq keycode to the table enabling running sysrq debugging in
    the guest via the monitor sendkey command, like:

    (qemu) sendkey alt-sysrq-t

    Tested on x86-64 target and Linux guest.

    Signed-off-by: Ryan Harper <ryanh@us.ibm.com>

The ps2 device is now fixed wrt modifiers and the 'print' key. Further the
handling of the 'sysrq' key has some problems of its own, documented in the
previous commit. To cleanup this mess, we convert any use of 'sysrq' into
'print' prior to dispatching the event to device models.

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 20171019142848.572-9-berrange@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2017-10-23 10:50:02 +02:00
Daniel P. Berrange 237925baa9 ui: use correct union field for key number
The code converting key numbers to QKeyCode in the 'input-send-event'
command mistakenly accessed the key->u.qcode union field instead of
the key->u.number field. This is harmless because the fields use the
same size datatype in both cases, but none the less it should be fixed
to avoid confusion.

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 20171019142848.572-4-berrange@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2017-10-23 10:50:02 +02:00
Daniel P. Berrange 3ad35e7a9b ui: don't export qemu_input_event_new_key
All public code should use qemu_input_event_send_key* functions
instead of creating an event directly.

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 20170929101201.21039-7-berrange@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2017-10-16 14:50:54 +02:00
Daniel P. Berrange af07e5ff02 ui: convert key events to QKeyCodes immediately
Always use QKeyCode in the InputKeyEvent struct, by converting key
numbers to QKeyCode at the time the event is created. This allows
the code processing / consuming key events to assume QKeyCode is
used. The only place we accept a key number in the InputKeyEvent
struct is with QMP commands sent by the user.

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 20170929101201.21039-6-berrange@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2017-10-16 14:50:54 +02:00
Markus Armbruster 977c736f80 qapi: Mechanically convert FOO_lookup[...] to FOO_str(...)
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <1503564371-26090-14-git-send-email-armbru@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
2017-09-04 13:09:13 +02:00
Alexander Graf 77b0359bf4 input: Decrement queue count on kbd delay
Delays in the input layer are special cased input events. Every input
event is accounted for in a global intput queue count. The special cased
delays however did not get removed from the queue, leading to queue overruns
and thus silent key drops after typing quite a few characters.

Signed-off-by: Alexander Graf <agraf@suse.de>
Message-id: 1498117318-162102-1-git-send-email-agraf@suse.de
Fixes: be1a7176 ("input: add support for kbd delays")
Cc: qemu-stable@nongnu.org
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2017-06-23 11:49:44 +02:00
Thomas Huth 95e92000c8 ui: Remove inclusion of "hw/qdev.h"
Looks like #include "hw/qdev.h" is not needed here, so remove it.

Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-id: 1497894617-12143-1-git-send-email-thuth@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2017-06-21 14:26:15 +02:00
Philippe Voinov 9cfa7ab939 ui: Support non-zero minimum values for absolute input axes
This patch refactors ui/input.c to support absolute axis
minimum values other than 0. All dependent calls to qemu_input_queue_abs
have been updated to explicitly supply 0 as the axis minimum value.

Signed-off-by: Philippe Voinov <philippevoinov@gmail.com>
Message-id: 20170505133952.29885-1-philippevoinov@gmail.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2017-05-11 09:42:16 +02:00
Marc-André Lureau 05c6638b20 input: don't queue delay if paused
qemu_input_event_send() discards key event when the guest is paused,
but not the delay.

The delay ends up in the input queue, and qemu_input_event_send_key()
will further fill the queue with upcoming events.

VNC uses qemu_input_event_send_key_delay(), not SPICE, which results
in a different input behaviour on pause: VNC will queue the events
(except the first that is discarded), SPICE will discard all events.

Don't queue delay if paused, and provide same behaviour on SPICE and
VNC clients on resume (and potentially avoid over-allocating the
buffer queue)

Fixes:
https://bugzilla.redhat.com/show_bug.cgi?id=1444326

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-id: 20170425130520.31819-1-marcandre.lureau@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2017-05-03 14:19:40 +02:00
Gerd Hoffmann fa18f36a46 input: limit kbd queue depth
Apply a limit to the number of items we accept into the keyboard queue.

Impact: Without this limit vnc clients can exhaust host memory by
sending keyboard events faster than qemu feeds them to the guest.

Fixes: CVE-2017-8379
Cc: P J P <ppandit@redhat.com>
Cc: Huawei PSIRT <PSIRT@huawei.com>
Reported-by: jiangxin1@huawei.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 20170428084237.23960-1-kraxel@redhat.com
2017-05-03 14:18:21 +02:00
Eric Blake 32bafa8fdd qapi: Don't special-case simple union wrappers
Simple unions were carrying a special case that hid their 'data'
QMP member from the resulting C struct, via the hack method
QAPISchemaObjectTypeVariant.simple_union_type().  But by using
the work we started by unboxing flat union and alternate
branches, coupled with the ability to visit the members of an
implicit type, we can now expose the simple union's implicit
type in qapi-types.h:

| struct q_obj_ImageInfoSpecificQCow2_wrapper {
|     ImageInfoSpecificQCow2 *data;
| };
|
| struct q_obj_ImageInfoSpecificVmdk_wrapper {
|     ImageInfoSpecificVmdk *data;
| };
...
| struct ImageInfoSpecific {
|     ImageInfoSpecificKind type;
|     union { /* union tag is @type */
|         void *data;
|-        ImageInfoSpecificQCow2 *qcow2;
|-        ImageInfoSpecificVmdk *vmdk;
|+        q_obj_ImageInfoSpecificQCow2_wrapper qcow2;
|+        q_obj_ImageInfoSpecificVmdk_wrapper vmdk;
|     } u;
| };

Doing this removes asymmetry between QAPI's QMP side and its
C side (both sides now expose 'data'), and means that the
treatment of a simple union as sugar for a flat union is now
equivalent in both languages (previously the two approaches used
a different layer of dereferencing, where the simple union could
be converted to a flat union with equivalent C layout but
different {} on the wire, or to an equivalent QMP wire form
but with different C representation).  Using the implicit type
also lets us get rid of the simple_union_type() hack.

Of course, now all clients of simple unions have to adjust from
using su->u.member to using su->u.member.data; while this touches
a number of files in the tree, some earlier cleanup patches
helped minimize the change to the initialization of a temporary
variable rather than every single member access.  The generated
qapi-visit.c code is also affected by the layout change:

|@@ -7393,10 +7393,10 @@ void visit_type_ImageInfoSpecific_member
|     }
|     switch (obj->type) {
|     case IMAGE_INFO_SPECIFIC_KIND_QCOW2:
|-        visit_type_ImageInfoSpecificQCow2(v, "data", &obj->u.qcow2, &err);
|+        visit_type_q_obj_ImageInfoSpecificQCow2_wrapper_members(v, &obj->u.qcow2, &err);
|         break;
|     case IMAGE_INFO_SPECIFIC_KIND_VMDK:
|-        visit_type_ImageInfoSpecificVmdk(v, "data", &obj->u.vmdk, &err);
|+        visit_type_q_obj_ImageInfoSpecificVmdk_wrapper_members(v, &obj->u.vmdk, &err);
|         break;
|     default:
|         abort();

Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <1458254921-17042-13-git-send-email-eblake@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-03-18 10:29:26 +01:00
Eric Blake 10f759079e qapi: Avoid use of 'data' member of QAPI unions
QAPI code generators currently create a 'void *data' member as
part of the anonymous union embedded in the C struct corresponding
to a QAPI union.  However, directly assigning to this member of
the union feels a bit fishy, when we can assign to another member
of the struct instead.

Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
Message-Id: <1457021813-10704-9-git-send-email-eblake@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-03-05 10:41:58 +01:00
Eric Blake b5a1b44318 ui: Shorten references into InputEvent
An upcoming patch will alter how simple unions, like InputEvent, are
laid out, which will impact all lines of the form 'evt->u.XXX'
(expanding it to the longer 'evt->u.XXX.data').  For better
legibility in that patch, and less need for line wrapping, it's better
to use a temporary variable to reduce the effect of a layout change to
just the variable initializations, rather than every reference within
an InputEvent.

There was one instance in hid.c:hid_pointer_event() where the code
was referring to evt->u.rel inside the case label where evt->u.abs
is the correct name; thankfully, both members of the union have the
same type, so it happened to work, but it is now cleaner.

Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <1457021813-10704-8-git-send-email-eblake@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-03-05 10:41:55 +01:00
Gerd Hoffmann 6575ccddf4 qapi: promote input-send-event to stable
With all fixups being in place now, we can promote input-send-event
to stable abi by removing the x- prefix.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
2016-03-01 08:20:27 +01:00
Gerd Hoffmann b98d26e333 qapi: switch x-input-send-event from console to device+head
Use display device qdev id and head number instead of console index to
specify the QemuConsole.  This makes things consistent with input
devices (for input routing) and vnc server configuration, which both use
display and head too.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
2016-03-01 07:51:34 +01:00
Gerd Hoffmann f2c1d54c18 console: add & use qemu_console_lookup_by_device_name
We have two places needing this, and a third one will come shortly.
So factor things out into a helper function to reduce code duplication.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
2016-03-01 07:51:34 +01:00
Peter Maydell e16f4c8770 ui: Clean up includes
Clean up includes so that osdep.h is included first and headers
which it implies are not included manually.

This commit was created with scripts/clean-includes.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1454089805-5470-2-git-send-email-peter.maydell@linaro.org
2016-02-04 17:01:04 +00:00
Eric Blake 7fb1cf1606 qapi: Don't let implicit enum MAX member collide
Now that we guarantee the user doesn't have any enum values
beginning with a single underscore, we can use that for our
own purposes.  Renaming ENUM_MAX to ENUM__MAX makes it obvious
that the sentinel is generated.

This patch was mostly generated by applying a temporary patch:

|diff --git a/scripts/qapi.py b/scripts/qapi.py
|index e6d014b..b862ec9 100644
|--- a/scripts/qapi.py
|+++ b/scripts/qapi.py
|@@ -1570,6 +1570,7 @@ const char *const %(c_name)s_lookup[] = {
|     max_index = c_enum_const(name, 'MAX', prefix)
|     ret += mcgen('''
|     [%(max_index)s] = NULL,
|+// %(max_index)s
| };
| ''',
|                max_index=max_index)

then running:

$ cat qapi-{types,event}.c tests/test-qapi-types.c |
    sed -n 's,^// \(.*\)MAX,s|\1MAX|\1_MAX|g,p' > list
$ git grep -l _MAX | xargs sed -i -f list

The only things not generated are the changes in scripts/qapi.py.

Rejecting enum members named 'MAX' is now useless, and will be dropped
in the next patch.

Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <1447836791-369-23-git-send-email-eblake@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
[Rebased to current master, commit message tweaked]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
2015-12-17 08:21:28 +01:00
Pavel Dovgalyuk ee312992a3 replay: recording of the user input
This records user input (keyboard and mouse events) in record mode and replays
these input events in replay mode.

Signed-off-by: Pavel Dovgalyuk <pavel.dovgaluk@ispras.ru>
Message-Id: <20150917162524.8676.11696.stgit@PASHA-ISP.def.inno>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Pavel Dovgalyuk <Pavel.Dovgaluk@ispras.ru>
2015-11-06 10:16:03 +01:00
Eric Blake 568c73a478 input: Convert to new qapi union layout
We have two issues with our qapi union layout:
1) Even though the QMP wire format spells the tag 'type', the
C code spells it 'kind', requiring some hacks in the generator.
2) The C struct uses an anonymous union, which places all tag
values in the same namespace as all non-variant members. This
leads to spurious collisions if a tag value matches a non-variant
member's name.

Make the conversion to the new layout for input-related code.

Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <1445898903-12082-20-git-send-email-eblake@redhat.com>
[Commit message tweaked slightly]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
2015-11-02 08:30:28 +01:00
Markus Armbruster d49b683644 qerror: Move #include out of qerror.h
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
2015-06-22 18:20:40 +02:00
Markus Armbruster 75158ebbe2 qerror: Eliminate QERR_DEVICE_NOT_FOUND
Error classes other than ERROR_CLASS_GENERIC_ERROR should not be used
in new code.  Hiding them in QERR_ macros makes new uses hard to spot.
Fortunately, there's just one such macro left.  Eliminate it with this
coccinelle semantic patch:

    @@
    expression EP, E;
    @@
    -error_set(EP, QERR_DEVICE_NOT_FOUND, E)
    +error_set(EP, ERROR_CLASS_DEVICE_NOT_FOUND, "Device '%s' not found", E)

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
2015-06-22 18:20:39 +02:00
Markus Armbruster 3e5a50d64c hmp: Name HMP command handler functions hmp_COMMAND()
Some are called do_COMMAND() (old ones, usually), some hmp_COMMAND(),
and sometimes COMMAND pointlessly differs in spelling.

Normalize to hmp_COMMAND(), where COMMAND is exactly the command name
with '-' replaced by '_'.

Exceptions:

* do_device_add() and client_migrate_info() *not* renamed to
  hmp_device_add(), hmp_client_migrate_info(), because they're also
  QMP handlers.  They still need to be converted to QAPI.

* do_memory_dump(), do_physical_memory_dump(), do_ioport_read(),
  do_ioport_write() renamed do hmp_* instead of hmp_x(), hmp_xp(),
  hmp_i(), hmp_o(), because those names are too cryptic for my taste.

* do_info_help() renamed to hmp_info_help() instead of hmp_info(),
  because it only covers help.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
2015-02-18 11:58:30 +01:00
Gerd Hoffmann df5b2adb73 input: move input-send-event into experimental namespace
Ongoing discussions on how we are going to specify the console,
so tag the command as experiental so we can refine things in
the 2.3 development cycle.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 1416923657-10614-1-git-send-email-armbru@redhat.com
[Spell out "not a stable API", and x- the QAPI schema, too]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Amos Kong <akong@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-11-25 17:03:31 +00:00
Amos Kong 51fc44768a QMP/input-send-event: make console parameter optional
The 'QemuConsole' is the input source for handler, we share some
input handlers to process the input events from different QemuConsole.

Normally we only have one set of keyboard, mouse, usbtablet, etc.
The devices have different mask, it's fine to just checking mask to
insure that the handler has the ability to process the event.

I saw we try to bind console to handler in usb/dev-hid.c, but display
always isn't available at that time.

If we have multiseat setup (as Gerd said), we only have 'problem' in
this case. Actually event from different devices have the same effect
for system, it's fine to always use the first available handler
without caring about the console.

For send-key command, we just pass a NULL for console parameter in
calling qemu_input_event_send_key(NULL, ..), but 'input-send-event'
needs to care more devices.

Conclusion:
Generally assigning the special console is meanless, and we can't
directly remove the QMP parameter for compatibility.

So we can make the parameter optional. The parameter might be useful
for some special condition: we have multiple devices without binding
console and they all have the ability(mask) to process events, and
we don't want to use the first one.

Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Markus Armbruster <armbru@redhat.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Amos Kong <akong@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2014-11-13 11:06:40 +01:00
Marcelo Tosatti 50c6617fcb add input-send-event command
Which allows specification of absolute/relative,
up/down and console parameters.

Suggested by Gerd Hoffman.

Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2014-10-02 09:58:14 +02:00
Gerd Hoffmann be1a717624 input: add support for kbd delays
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2014-06-04 08:40:41 +02:00
Gerd Hoffmann 6f5943cf45 input: bind devices and input routing
Add function to bind input devices to display devices.  Implementing
input routing on top of this:  Events coming from the display device in
question are routed to the input device bound to it (if there is one).

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2014-05-26 08:42:43 +02:00
Gerd Hoffmann 2386a90730 input: add name to input_event_key_number
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2014-05-26 08:42:42 +02:00
Gerd Hoffmann 528728fd93 input: add qemu_input_handler_deactivate
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2014-05-16 08:30:12 +02:00
Gerd Hoffmann bdcc3a28b7 input: add sanity check
Check we've actually found a input handler before trying to call it.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2014-04-01 10:17:45 +02:00
Hani Benhabiles 0419f78fae input: mouse_set should check input device type.
Otherwise, the index of an input device like a usb-kbd is silently accepted.

(qemu) info mice
  Mouse #2: QEMU PS/2 Mouse
* Mouse #3: QEMU HID Mouse
(qemu) mouse_set 1
(qemu) info mice
  Mouse #2: QEMU PS/2 Mouse
* Mouse #3: QEMU HID Mouse

Also replace monitor_printf() call in do_mouse_set() with error_report() and
adjust error message.

Signed-off-by: Hani Benhabiles <hani@linux.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2014-04-01 10:17:45 +02:00
Gerd Hoffmann 70b52f62b8 input: move do_mouse_set to new core
This removes the last user of the lecagy input mouse handler list,
so we can remove more legacy bits with this.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2014-03-05 09:52:04 +01:00
Gerd Hoffmann e842c68d44 input: move qmp_query_mice to new core
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2014-03-05 09:52:04 +01:00
Gerd Hoffmann a8dfb1c34f input: add input_mouse_mode tracepoint
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2014-03-05 09:52:04 +01:00
Gerd Hoffmann 4a33f45e2e input: move mouse mode notifier to new core
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2014-03-05 09:52:04 +01:00
Gerd Hoffmann c43ce5512f input: trace events
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2014-03-05 09:52:03 +01:00
Gerd Hoffmann 502c8db5b4 input: mouse: add qemu_input_is_absolute()
Same as kbd_mouse_is_absolute(), but using new input core.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2014-03-05 09:52:02 +01:00
Gerd Hoffmann d3535431e8 input: mouse: add graphic_rotate support
Transform absolute mouse events according to graphic_rotate.

Legacy input code does it for both absolute and relative events,
but the logic is broken for relative coordinates, so this is
most likely not used anyway.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2014-03-05 09:52:02 +01:00
Gerd Hoffmann 43579403a3 input: mouse: add helpers functions to core
Likewise a bunch of helper functions to manage mouse button
and movement events, again to make life easier for the ui code.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2014-03-05 09:50:18 +01:00
Gerd Hoffmann 6567147588 input: keyboard: add helper functions to core
A bunch of helper functions to manage keyboard events,
to make life simpler for the ui code when submitting
keyboard events.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2014-03-05 09:50:17 +01:00
Gerd Hoffmann c8b405b679 input: add core bits of the new input layer
Register and unregister handlers.
Event dispatcher code.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2014-03-05 09:50:17 +01:00