Commit Graph

68 Commits

Author SHA1 Message Date
Peter Maydell 27a296fce9 qemu-ga: Convert invocation documentation to rST
The qemu-ga documentation is currently in qemu-ga.texi in
Texinfo format, which we present to the user as:
 * a qemu-ga manpage
 * a section of the main qemu-doc HTML documentation

Convert the documentation to rST format, and present it to
the user as:
 * a qemu-ga manpage
 * part of the interop/ Sphinx manual

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Tested-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Message-id: 20190905131040.8350-1-peter.maydell@linaro.org
2019-09-13 16:05:01 +01:00
Eric Blake 0a4795455c nbd: Prepare for NBD_CMD_FLAG_FAST_ZERO
Commit fe0480d6 and friends added BDRV_REQ_NO_FALLBACK as a way to
avoid wasting time on a preliminary write-zero request that will later
be rewritten by actual data, if it is known that the write-zero
request will use a slow fallback; but in doing so, could not optimize
for NBD.  The NBD specification is now considering an extension that
will allow passing on those semantics; this patch updates the new
protocol bits and 'qemu-nbd --list' output to recognize the bit, as
well as the new errno value possible when using the new flag; while
upcoming patches will improve the client to use the feature when
present, and the server to advertise support for it.

The NBD spec recommends (but not requires) that ENOTSUP be avoided for
all but failures of a fast zero (the only time it is mandatory to
avoid an ENOTSUP failure is when fast zero is supported but not
requested during write zeroes; the questionable use is for ENOTSUP to
other actions like a normal write request).  However, clients that get
an unexpected ENOTSUP will either already be treating it the same as
EINVAL, or may appreciate the extra bit of information.  We were
equally loose for returning EOVERFLOW in more situations than
recommended by the spec, so if it turns out to be a problem in
practice, a later patch can tighten handling for both error codes.

Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20190823143726.27062-3-eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
[eblake: tweak commit message, also handle EOPNOTSUPP]
2019-09-05 16:03:13 -05:00
Eric Blake 61cc872456 nbd: Advertise multi-conn for shared read-only connections
The NBD specification defines NBD_FLAG_CAN_MULTI_CONN, which can be
advertised when the server promises cache consistency between
simultaneous clients (basically, rules that determine what FUA and
flush from one client are able to guarantee for reads from another
client).  When we don't permit simultaneous clients (such as qemu-nbd
without -e), the bit makes no sense; and for writable images, we
probably have a lot more work before we can declare that actions from
one client are cache-consistent with actions from another.  But for
read-only images, where flush isn't changing any data, we might as
well advertise multi-conn support.  What's more, advertisement of the
bit makes it easier for clients to determine if 'qemu-nbd -e' was in
use, where a second connection will succeed rather than hang until the
first client goes away.

This patch affects qemu as server in advertising the bit.  We may want
to consider patches to qemu as client to attempt parallel connections
for higher throughput by spreading the load over those connections
when a server advertises multi-conn, but for now sticking to one
connection per nbd:// BDS is okay.

See also: https://bugzilla.redhat.com/1708300
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20190815185024.7010-1-eblake@redhat.com>
[eblake: tweak blockdev-nbd.c to not request shared when writable,
fix iotest 233]
Reviewed-by: John Snow <jsnow@redhat.com>
2019-09-05 15:51:55 -05:00
Markus Armbruster ffaee83bcb qapi: Move query-target from misc.json to machine.json
Move query-target and its return type TargetInfo from misc.json to
machine.json, where they are covered by MAINTAINERS section "Machine
core".  Also move its implementation from arch_init.c to
hw/core/machine-qmp-cmds, where it is likewise covered.

All users of SysEmuTarget are now in machine.json.  Move it there from
common.json.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190709152053.16670-3-armbru@redhat.com>
2019-08-21 13:24:01 +02:00
Stefan Hajnoczi df98d7ccc2 docs: clarify multiqueue vs multiple virtqueues
The vhost-user specification does not explain when
VHOST_USER_PROTOCOL_F_MQ must be implemented.  This may lead
implementors of vhost-user masters to believe that this protocol feature
is required for any device that has multiple virtqueues.  That would be
a mistake since existing vhost-user slaves offer multiple virtqueues but
do not advertise VHOST_USER_PROTOCOL_F_MQ.

For example, a vhost-net device with one rx/tx queue pair is not
multiqueue.  The slave does not need to advertise
VHOST_USER_PROTOCOL_F_MQ.  Therefore the master must assume it has these
virtqueues and cannot rely on askingt the slave how many virtqueues
exist.

Extend the specification to explain the different between true
multiqueue and regular devices with a fixed virtqueue layout.

Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20190624091304.666-1-stefanha@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
2019-07-25 04:17:34 -04:00
John Snow a7786bfb0e docs/bitmaps: use QMP lexer instead of json
The annotated style json we use in QMP documentation is not strict json
and depending on the version of Sphinx (2.0+) or Pygments installed,
might cause the build to fail.

Use the new QMP lexer.

Further, some versions of Sphinx can not apply custom lexers to "code"
directives and require the use of "code-block" directives instead, so
make that change at this time as well.

Tested under:
- Sphinx 1.3.6 and Pygments 2.4
- Sphinx 1.7.6 and Pygments 2.2 (Fedora 29 packages)
- Sphinx 2.0.1 and Pygments 2.4
- Sphinx 3.0.0+/f396b3a783 and Pygments 2.4 (From Sphinx git c4f44bdd)

Reported-by: Aarushi Mehta <mehta.aaru20@gmail.com>
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Message-id: 20190603214653.29369-4-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
2019-07-10 15:08:07 -04:00
John Snow 575e622628 docs/interop/bitmaps.rst: Fix typos
Pygments and Sphinx get pickier all the time; Sphinx 2.1+ now catches
these errors.

Signed-off-by: John Snow <jsnow@redhat.com>
Reported-by: Aarushi Mehta <mehta.aaru20@gmail.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-id: 20190603214653.29369-2-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
2019-07-10 15:08:06 -04:00
Stefan Hajnoczi 3ef4dff2b3 docs: avoid vhost-user-net specifics in multiqueue section
The "Multiple queue support" section makes references to vhost-user-net
"queue pairs".  This is confusing for two reasons:
1. This actually applies to all device types, not just vhost-user-net.
2. VHOST_USER_GET_QUEUE_NUM returns the number of virtqueues, not the
   number of queue pairs.

Reword the section so that the vhost-user-net specific part is relegated
to the very end: we acknowledge that vhost-user-net historically
automatically enabled the first queue pair.

Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20190626074815.19994-5-stefanha@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2019-07-04 17:00:32 -04:00
Marc-André Lureau 00ab8cb141 docs/vhost-user.json: some firmware.json copy leftovers
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20190605131221.29432-1-marcandre.lureau@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2019-06-16 16:16:52 -04:00
Marc-André Lureau bd2e44fee4 vhost-user: add vhost_user_gpu_set_socket()
Add a new vhost-user message to give a unix socket to a vhost-user
backend for GPU display updates.

Back when I started that work, I added a new GPU channel because the
vhost-user protocol wasn't bidirectional. Since then, there is a
vhost-user-slave channel for the slave to send requests to the master.
We could extend it with GPU messages. However, the GPU protocol is
quite orthogonal to vhost-user, thus I chose to have a new dedicated
channel.

See vhost-user-gpu.rst for the protocol details.

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-id: 20190524130946.31736-2-marcandre.lureau@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2019-05-29 06:29:07 +02:00
Marc-André Lureau ed1be66bfc docs: reST-ify vhost-user documentation
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20190315180735.13096-1-marcandre.lureau@redhat.com>
Reviewed-by: Jens Freimann <jfreimann@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2019-05-20 18:40:02 -04:00
Peter Maydell 8482ff2eb3 Pull request
-----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEE+ber27ys35W+dsvQfe+BBqr8OQ4FAlzKAHAACgkQfe+BBqr8
 OQ5mmhAAppAdw0YjcgX99Ipc5SnLb4wwxm3ut3BlNoa0+m9uPIEq0bnNbR1O1EDX
 I6r+4pNiBR7MN7b2HSRxEfoyjqhPL6X9PhtaNAGM30j8nd/HcWOaaMwS9oD/IHK9
 87qm00rcjZuVGPOld20C6Im6kh55Z4quGOGYdQ1GGmZHw6C3Bb9nBbf2DAoi+wSr
 zpf4b9YbuUfHHH+VoW6KnEi/OmISLERrMHCeO8s0y4fI2L9QJjtfKCjYp0JnlZCt
 dLqZKZzWqXvD5YCguFPf56Lo7gN8Iply/GNhWmycnASIBUVyagsEfPOhEH9CC7mW
 h2Et52LR6wQporsHgWFfsCObNNWV7g6Y53fsXmN5IwlgsD/s2AA82yPk4WfTpg/D
 if33K/x0re53lg+A27SWQittlx/8zsWl4xrGiEdJ0H7WWXQiIxd8rqmwg4lkBZDn
 R/nAqEaLok3IAIyW+CsyjYyb7Ek713NxzstrEkMlu+z2BsqzEk1/IIb0GqMcIvLV
 VIdoBwMdYPphUnSWqIuBVS3XKKN51T0BDSnjPSZtpayBNyE1Eqq8D4MF+atayDDn
 gQ3n4cs43LQ0PdjSCt0hb/jctVLD2AfOHPAPs2Ww5aXbpDysM/OQZHMi0+8oBeGL
 3gkGaobMcf6SGCxzrQwPGqKXLyq8rru6hl4Kpzl6EdzrpfSUAAI=
 =ZpYH
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/jnsnow/tags/bitmaps-pull-request' into staging

Pull request

# gpg: Signature made Wed 01 May 2019 21:24:16 BST
# gpg:                using RSA key F9B7ABDBBCACDF95BE76CBD07DEF8106AAFC390E
# gpg: Good signature from "John Snow (John Huston) <jsnow@redhat.com>" [full]
# Primary key fingerprint: FAEB 9711 A12C F475 812F  18F2 88A9 064D 1835 61EB
#      Subkey fingerprint: F9B7 ABDB BCAC DF95 BE76  CBD0 7DEF 8106 AAFC 390E

* remotes/jnsnow/tags/bitmaps-pull-request:
  docs/interop/bitmaps: rewrite and modernize doc
  Makefile: add nit-picky mode to sphinx-build

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-05-02 12:04:51 +01:00
John Snow 90edef80a0 docs/interop/bitmaps: rewrite and modernize doc
This just about rewrites the entirety of the bitmaps.rst document to
make it consistent with the 4.0 release. I have added new features seen
in the 4.0 release, as well as tried to clarify some points that keep
coming up when discussing this feature both in-house and upstream.

It does not yet cover pull backups or migration details, but I intend to
keep extending this document to cover those cases.

Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-id: 20190426221528.30293-3-jsnow@redhat.com
[Adjusted commit message. --js]
Signed-off-by: John Snow <jsnow@redhat.com>
2019-05-01 16:21:24 -04:00
Peter Maydell 3b5b6e9b51 pci, pc, virtio: features, fixes, cleanups
intel-iommu scalable option
 pcie acs emulation
 beginning for vhost-user-blk reconnect and of vhost-user backend work
 misc fixes and cleanups
 
 Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
 -----BEGIN PGP SIGNATURE-----
 
 iQEcBAABAgAGBQJciHBSAAoJECgfDbjSjVRpoxkH/2NvGGZo+fSAIjVcEOe9BKZx
 XeI4X51QnqOqur3GktoHQzpMYCGxYy653AE69aoO1JVOXsoJS2py0SKw5VIa9bnh
 BeZwXGmf1/rySC+iFc5oSNxHv7vS2o40ccwrkeKoqbbzrnLPIYQs/yyfJG/m0HtS
 xj0zSN6rTY8xxiJYVQftav3ylqInIr3d14WoJcIP3ksiOVtuQ1yjDJnJdKCZvLMk
 4dtFuQJpownQrOZ0jfXXvpWu2VUC2ZuBd4ylTK3IiqBRjfaU4/wIq6ySMsU1evLy
 chcAykqY0jt5nz339K2HgquUtcuE3LsKi3igqTZMKi2vb3SLQFnPBO0DUyjXvGg=
 =gusE
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging

pci, pc, virtio: features, fixes, cleanups

intel-iommu scalable option
pcie acs emulation
beginning for vhost-user-blk reconnect and of vhost-user backend work
misc fixes and cleanups

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

# gpg: Signature made Wed 13 Mar 2019 02:52:02 GMT
# gpg:                using RSA key 281F0DB8D28D5469
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" [full]
# gpg:                 aka "Michael S. Tsirkin <mst@redhat.com>" [full]
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17  0970 C350 3912 AFBE 8E67
#      Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA  8A0D 281F 0DB8 D28D 5469

* remotes/mst/tags/for_upstream: (26 commits)
  i386, acpi: check acpi_memory_hotplug capacity in pre_plug
  gen_pcie_root_port: Add ACS (Access Control Services) capability
  pcie: Add a simple PCIe ACS (Access Control Services) helper function
  vhost-user-blk: Add support to get/set inflight buffer
  libvhost-user: Support tracking inflight I/O in shared memory
  libvhost-user: Introduce vu_queue_map_desc()
  libvhost-user: Remove unnecessary FD flag check for event file descriptors
  vhost-user: Support transferring inflight buffer between qemu and backend
  nvdimm: use NVDIMM_ACPI_IO_LEN for the proper IO size
  nvdimm: use *function* directly instead of allocating it again
  nvdimm: fix typo in nvdimm_build_nvdimm_devices argument
  intel_iommu: add scalable-mode option to make scalable mode work
  intel_iommu: add 256 bits qi_desc support
  intel_iommu: scalable mode emulation
  libvhost-user: add vu_queue_unpop()
  libvhost-user-glib: export vug_source_new()
  vhost-user: split vhost_user_read()
  vhost-user: wrap some read/write with retry handling
  libvhost-user: exit by default on VHOST_USER_NONE
  vhost-user: simplify vhost_user_init/vhost_user_cleanup
  ...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-03-13 19:10:40 +00:00
Xie Yongji 5ad204bf2a vhost-user: Support transferring inflight buffer between qemu and backend
This patch introduces two new messages VHOST_USER_GET_INFLIGHT_FD
and VHOST_USER_SET_INFLIGHT_FD to support transferring a shared
buffer between qemu and backend.

Firstly, qemu uses VHOST_USER_GET_INFLIGHT_FD to get the
shared buffer from backend. Then qemu should send it back
through VHOST_USER_SET_INFLIGHT_FD each time we start vhost-user.

This shared buffer is used to track inflight I/O by backend.
Qemu should retrieve a new one when vm reset.

Signed-off-by: Xie Yongji <xieyongji@baidu.com>
Signed-off-by: Chai Wen <chaiwen@baidu.com>
Signed-off-by: Zhang Yu <zhangyu31@baidu.com>
Message-Id: <20190228085355.9614-2-xieyongji@baidu.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2019-03-12 22:31:21 -04:00
Marc-André Lureau 482580a658 vhost-user: define conventions for vhost-user backends
As discussed during "[PATCH v4 00/29] vhost-user for input & GPU"
review, let's define a common set of backend conventions to help with
management layer implementation, and interoperability.

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20190308140454.32437-3-marcandre.lureau@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2019-03-12 21:22:31 -04:00
Vladimir Sementsov-Ogievskiy 2fd490c614 docs/interop/qcow2: Improve bitmap flag in_use specification
We already use (we didn't notice it) IN_USE flag for marking bitmap
metadata outdated, such as AUTO flag, which mirrors enabled/disabled
bitmaps. Now we are going to support bitmap resize, so it's good to
write IN_USE meaning with more details.

Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-id: 20190311185147.52309-2-vsementsov@virtuozzo.com
Signed-off-by: John Snow <jsnow@redhat.com>
2019-03-12 12:06:11 -04:00
Markus Armbruster e33763be7c docs/interop/firmware.json: Prefer -machine to if=pflash
The previous commit added a way to configure firmware with -blockdev
rather than -drive if=pflash.  Document it as the preferred way.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190308131445.17502-13-armbru@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
2019-03-11 22:54:25 +01:00
Kevin Wolf e88153ea9a qcow2 spec: Describe string header extensions
Be more specific about the string representation in header extensions.

Suggested-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
2019-03-08 12:26:46 +01:00
Kevin Wolf 65a3d073e9 qcow2: Extend spec for external data files
This adds external data file to the qcow2 spec as a new incompatible
feature.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2019-03-08 12:26:45 +01:00
Peter Maydell f8cf7147f1 docs: Provide separate conf.py for each manual we want
By default Sphinx wants to build a single manual at once.
For QEMU, this doesn't suit us, because we want to have
separate manuals for "Developer's Guide", "User Manual",
and so on, and we don't want to ship the Developer's Guide
to end-users. However, we don't want to completely duplicate
conf.py for each manual, and we'd like to continue to
support "build all docs in one run" for third-party sites
like readthedocs.org.

Make the top-level conf.py support two usage forms:
 (1) as a common config file which is included by the conf.py
 for each of QEMU's manuals: in this case sphinx-build is run
 multiple times, once per subdirectory.
 (2) as a top level conf file which will result in building all
 the manuals into a single document: in this case sphinx-build is
 run once, on the top-level docs directory.

Provide per-manual conf.py files and top level pages for
our first two manuals:
 * QEMU Developer's Guide (docs/devel)
 * QEMU System Emulation Management and Interoperability Guide
   (docs/interop)

Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Acked-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Message-id: 20190305172139.32662-9-peter.maydell@linaro.org
Message-id: 20190228145624.24885-9-peter.maydell@linaro.org
2019-03-07 14:26:46 +00:00
Eric Blake ba2d3b3ab2 nbd: Document timeline of various features
It can be useful to figure out which NBD protocol features are
exposed by a server, as well as what features a client will
take advantage of if available, for a given qemu release.  It's
not always precise to base features on version numbers (thanks
to downstream backports), but any documentation is better than
making users search through git logs themselves.

This patch originally stemmed from a request to document that
pristine 3.0 has a known bug where NBD_OPT_LIST_META_CONTEXT
with 0 queries forgot to advertise an available
"qemu:dirty-bitmap" context, but documenting bugs like this (or
the fact that 3.0 also botched NBD_CMD_CACHE) gets to be too
much details, especially since buggy releases will be less
likely connection targets over time.  Instead, I chose to just
remind users to check stable release branches.

Suggested-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20181215135324.152629-3-eblake@redhat.com>
Reviewed-by: Richard W.M. Jones <rjones@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
2019-01-04 17:41:28 -06:00
Eric Blake aee03bf367 docs: Update references to JSON RFC
RFC8259 obsoletes RFC7159. Fix a couple of URLs to point to the
newer version.

Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20181203175702.128701-1-eblake@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
2018-12-13 19:10:06 +01:00
Peter Xu 9ab84470ff monitor: Suspend monitor instead dropping commands
When a QMP client sends in-band commands more quickly that we can
process them, we can either queue them without limit (QUEUE), drop
commands when the queue is full (DROP), or suspend receiving commands
when the queue is full (SUSPEND).  None of them is ideal:

* QUEUE lets a misbehaving client make QEMU eat memory without bounds.
Not such a hot idea.

* With DROP, the client has to cope with dropped in-band commands.  To
inform the client, we send a COMMAND_DROPPED event then.  The event is
flawed by design in two ways: it's ambiguous (see commit d621cfe0a1),
and it brings back the "eat memory without bounds" problem.

* With SUSPEND, the client has to manage the flow of in-band commands to
keep the monitor available for out-of-band commands.

We currently DROP.  Switch to SUSPEND.

Managing the flow of in-band commands to keep the monitor available for
out-of-band commands isn't really hard: just count the number of
"outstanding" in-band commands (commands sent minus replies received),
and if it exceeds the limit, hold back additional ones until it drops
below the limit again.

Note that we need to be careful pairing the suspend with a resume, or
else the monitor will hang, possibly forever.  And here since we need to
make sure both:

     (1) popping request from the req queue, and
     (2) reading length of the req queue

will be in the same critical section, we let the pop function take the
corresponding queue lock when there is a request, then we release the
lock from the caller.

Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20181009062718.1914-2-peterx@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
2018-12-12 09:55:57 +01:00
Eric Blake d3e1a7eb4c qcow2: Document some maximum size constraints
Although off_t permits up to 63 bits (8EB) of file offsets, in
practice, we're going to hit other limits first.  Document some
of those limits in the qcow2 spec (some are inherent, others are
implementation choices of qemu), and how choice of cluster size
can influence some of the limits.

While we cannot map any uncompressed virtual cluster to any
address higher than 64 PB (56 bits) (due to the current L1/L2
field encoding stopping at bit 55), qemu's cap of 8M for the
refcount table can still access larger host addresses for some
combinations of large clusters and small refcount_order.  For
comparison, ext4 with 4k blocks caps files at 16PB.

Another interesting limit: for compressed clusters, the L2 layout
requires an ever-smaller maximum host offset as cluster size gets
larger, down to a 512 TB maximum with 2M clusters.  In particular,
note that with a cluster size of 8k or smaller, the L2 entry for
a compressed cluster could technically point beyond the 64PB mark,
but when you consider that with 8k clusters and refcount_order = 0,
you cannot access beyond 512T without exceeding qemu's limit of an
8M cap on the refcount table, it is unlikely that any image in the
wild has attempted to do so.  To be safe, let's document that bits
beyond 55 in a compressed cluster must be 0.

Signed-off-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2018-11-19 12:51:40 +01:00
Stefan Weil 963e64a486 docs: Fix some typos (most found by codespell)
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
2018-09-25 17:26:18 +02:00
Thomas Huth 2feac451d2 Remove the deprecated -nodefconfig option
It's the same as -no-user-config and marked as deprecated since three
releases already. Time to remove it now.

Acked-by: Peter Krempa <pkrempa@redhat.com>
Acked-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
2018-08-31 09:52:46 +02:00
Markus Armbruster 72e9e569d0 docs/interop/qmp-spec: How to force known good parser state
Section "QGA Synchronization" specifies that sending "a raw 0xFF
sentinel byte" makes the server "reset its state and discard all
pending data prior to the sentinel."  What actually happens there is a
lexical error, which will produce one or more error responses.
Moreover, it's not specific to QGA.

Create new section "Forcing the JSON parser into known-good state" to
document the technique properly.  Rewrite section "QGA
Synchronization" to document just the other direction, i.e. command
guest-sync-delimited.

Section "Protocol Specification" mentions "synchronization bytes
(documented below)".  Delete that.

While there, fix it not to claim '"Server" is QEMU itself', but
'"Server" is either QEMU or the QEMU Guest Agent'.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20180823164025.12553-2-armbru@redhat.com>
2018-08-24 20:25:48 +02:00
Ville Skyttä 9277d81f5c docs: Grammar and spelling fixes
Signed-off-by: Ville Skyttä <ville.skytta@iki.fi>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 20180612065150.21110-1-ville.skytta@iki.fi
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-07-13 10:16:04 +01:00
Markus Armbruster 00ecec151d qmp: Redo how the client requests out-of-band execution
Commit cf869d5317 "qmp: support out-of-band (oob) execution" added a
general mechanism for command-independent arguments just for an
out-of-band flag:

    The "control" key is introduced to store this extra flag.  "control"
    field is used to store arguments that are shared by all the commands,
    rather than command specific arguments.  Let "run-oob" be the first.

However, it failed to reject unknown members of "control".  For
instance, in QMP command

    {"execute": "query-name", "id": 42, "control": {"crap": true}}

"crap" gets silently ignored.

Instead of fixing this, revert the general "control" mechanism
(because YAGNI), and do it the way I initially proposed, with key
"exec-oob".  Simpler code, simpler interface.

An out-of-band command

    {"execute": "migrate-pause", "id": 42, "control": {"run-oob": true}}

becomes

    {"exec-oob": "migrate-pause", "id": 42}

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20180703085358.13941-13-armbru@redhat.com>
[Commit message typo fixed]
2018-07-03 23:18:56 +02:00
Markus Armbruster 80cd93bd96 qmp: Make "id" optional again even in "oob" monitors
Commit cf869d5317 "qmp: support out-of-band (oob) execution" made
"id" mandatory for all commands when the client accepted capability
"oob".  This is rather onerous when you play with QMP by hand, and
unnecessarily so: only out-of-band commands need an ID for reliable
matching of response to command.

Revert that part of commit cf869d5317 for now, but have documentation
advise on the need to use "id" with out-of-band commands.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20180703085358.13941-8-armbru@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
2018-07-03 23:18:56 +02:00
Markus Armbruster 71696cc66c docs/interop/qmp: Improve OOB documentation
OOB documentation is spread over qmp-spec.txt sections 2.2.1
Capabilities and 2.3 Issuing Commands.  The amount of detail is a bit
distracting there.  Move the meat of the matter to new section 2.3.1
Out of band execution.

Throw in a few other improvements while there:

* 2.2 Server Greeting: Drop advice to search entire capabilities
  array; should be obvious.

* 3. QMP Examples

  - 3.1 Server Greeting: Update greeting to the one we expect for the
    release.  Now shows capability "oob".  Update qmp-intro.txt
    likewise.

  - 3.2 Capabilities negotiation: Show client accepting capability
    "oob".

  - 3.7 Out-of-band execution: New.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20180703085358.13941-4-armbru@redhat.com>
[Whitespace tidied up]
2018-07-03 23:09:31 +02:00
Markus Armbruster c069821220 qmp: Say "out-of-band" instead of "Out-Of-Band"
Affects documentation and a few error messages.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20180703085358.13941-2-armbru@redhat.com>
2018-07-03 11:46:54 +02:00
Vladimir Sementsov-Ogievskiy 3229a835a3 docs/interop: add nbd.txt
Describe new metadata namespace: "qemu".

Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20180609151758.17343-7-vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
[eblake: grammar tweaks]
Signed-off-by: Eric Blake <eblake@redhat.com>
2018-06-21 09:23:59 -05:00
Peter Maydell f67c9b693a acpi, vhost, misc: fixes, features
vDPA support, fix to vhost blk RO bit handling, some include path
 cleanups, NFIT ACPI table.
 
 Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
 -----BEGIN PGP SIGNATURE-----
 
 iQEcBAABAgAGBQJbEXNvAAoJECgfDbjSjVRpc8gH/R8xrcFrV+k9wwbgYcOcGb6Y
 LWjseE31pqJcxRV80vLOdzYEuLStZQKQQY7xBDMlA5vdyvZxIA6FLO2IsiJSbFAk
 EK8pclwhpwQAahr8BfzenabohBv2UO7zu5+dqSvuJCiMWF3jGtPAIMxInfjXaOZY
 odc1zY2D2EgsC7wZZ1hfraRbISBOiRaez9BoGDKPOyBY9G1ASEgxJgleFgoBLfsK
 a1XU+fDM6hAVdxftfkTm0nibyf7PWPDyzqghLqjR9WXLvZP3Cqud4p8N29mY51pR
 KSTjA4FYk6Z9EVMltyBHfdJs6RQzglKjxcNGdlrvacDfyFi79fGdiosVllrjfJM=
 =3+V0
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging

acpi, vhost, misc: fixes, features

vDPA support, fix to vhost blk RO bit handling, some include path
cleanups, NFIT ACPI table.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

# gpg: Signature made Fri 01 Jun 2018 17:25:19 BST
# gpg:                using RSA key 281F0DB8D28D5469
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>"
# gpg:                 aka "Michael S. Tsirkin <mst@redhat.com>"
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17  0970 C350 3912 AFBE 8E67
#      Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA  8A0D 281F 0DB8 D28D 5469

* remotes/mst/tags/for_upstream: (31 commits)
  vhost-blk: turn on pre-defined RO feature bit
  ACPI testing: test NFIT platform capabilities
  nvdimm, acpi: support NFIT platform capabilities
  tests/.gitignore: add entry for generated file
  arch_init: sort architectures
  ui: use local path for local headers
  qga: use local path for local headers
  colo: use local path for local headers
  migration: use local path for local headers
  usb: use local path for local headers
  sd: fix up include
  vhost-scsi: drop an unused include
  ppc: use local path for local headers
  rocker: drop an unused include
  e1000e: use local path for local headers
  ioapic: fix up includes
  ide: use local path for local headers
  display: use local path for local headers
  trace: use local path for local headers
  migration: drop an unused include
  ...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-06-04 10:15:16 +01:00
Laszlo Ersek 3a0adfc9bf docs/interop: add "firmware.json"
Add a schema that describes the different uses and properties of virtual
machine firmware.

Each firmware executable installed on a host system should come with at
least one JSON file that conforms to this schema. Each file informs the
management applications about
- the firmware's properties and one possible use case / feature set,
- configuration bits that are required to run the firmware binary.

In addition, define rules for management apps for picking the highest
priority firmware JSON file when multiple such files match the search
criteria.

Cc: "Daniel P. Berrange" <berrange@redhat.com>
Cc: David Gibson <dgibson@redhat.com>
Cc: Eric Blake <eblake@redhat.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Kashyap Chamarthy <kchamart@redhat.com>
Cc: Markus Armbruster <armbru@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Thomas Huth <thuth@redhat.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20180509152608.9343-1-lersek@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-06-01 15:14:25 +02:00
Tiwei Bie 44866521bd vhost-user: support registering external host notifiers
This patch introduces VHOST_USER_PROTOCOL_F_HOST_NOTIFIER.
With this feature negotiated, vhost-user backend can register
memory region based host notifiers. And it will allow the guest
driver in the VM to notify the hardware accelerator at the
vhost-user backend directly.

Signed-off-by: Tiwei Bie <tiwei.bie@intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2018-05-24 21:14:11 +03:00
Tiwei Bie 5f57fbeaaf vhost-user: allow slave to send fds via slave channel
Introduce VHOST_USER_PROTOCOL_F_SLAVE_SEND_FD protocol
feature to allow slave to send at most 8 descriptors
in each message to master via ancillary data using the
slave channel.

Suggested-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Tiwei Bie <tiwei.bie@intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2018-05-24 21:14:10 +03:00
Alberto Garcia 3c7d14b201 specs/qcow2: Clarify that compressed clusters have the COPIED bit reset
Compressed clusters are not supposed to have the COPIED bit set, but
this is not made explicit in the specs, so let's document it.

Signed-off-by: Alberto Garcia <berto@igalia.com>
Message-id: 74552e1d6e858d3159cb0c0e188e80bc9248e337.1523376013.git.berto@igalia.com
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
2018-05-15 16:15:21 +02:00
Maxime Coquelin 1c3e5a2617 vhost-user: back SET/GET_CONFIG requests with a protocol feature
Without a dedicated protocol feature, QEMU cannot know whether
the backend can handle VHOST_USER_SET_CONFIG and
VHOST_USER_GET_CONFIG messages.

This patch adds a protocol feature that is only advertised by
QEMU if the device implements the config ops. Vhost user init
fails if the device support the feature but the backend doesn't.

The backend should only send VHOST_USER_SLAVE_CONFIG_CHANGE_MSG
requests if the protocol feature has been negotiated.

Signed-off-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Changpeng Liu <changpeng.liu@intel.com>
2018-04-09 17:35:46 +03:00
Peter Maydell ed627b2ad3 virtio,vhost,pci,pc: features, cleanups
SRAT tables for DIMM devices
 new virtio net flags for speed/duplex
 post-copy migration support in vhost
 cleanups in pci
 
 Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
 -----BEGIN PGP SIGNATURE-----
 
 iQEcBAABAgAGBQJasR1rAAoJECgfDbjSjVRpOocH/R9A3g/TkpGjmLzJBrrX1NGO
 I/iq0ttHjqg4OBIChA4BHHjXwYUMs7XQn26B3efrk1otLAJhuqntZIIo3uU0WraA
 5J+4DT46ogs5rZWNzDCZ0zAkSaATDA6h9Nfh7TvPc9Q2WpcIT0cTa/jOtrxRc9Vq
 32hbUKtJSpNxRjwbZvk6YV21HtWo3Tktdaj9IeTQTN0/gfMyOMdgxta3+bymicbJ
 FuF9ybHcpXvrEctHhXHIL4/YVGEH/4shagZ4JVzv1dVdLeHLZtPomdf7+oc0+07m
 Qs+yV0HeRS5Zxt7w5blGLC4zDXczT/bUx8oln0Tz5MV7RR/+C2HwMOHC69gfpSc=
 =vomK
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging

virtio,vhost,pci,pc: features, cleanups

SRAT tables for DIMM devices
new virtio net flags for speed/duplex
post-copy migration support in vhost
cleanups in pci

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

# gpg: Signature made Tue 20 Mar 2018 14:40:43 GMT
# gpg:                using RSA key 281F0DB8D28D5469
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>"
# gpg:                 aka "Michael S. Tsirkin <mst@redhat.com>"
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17  0970 C350 3912 AFBE 8E67
#      Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA  8A0D 281F 0DB8 D28D 5469

* remotes/mst/tags/for_upstream: (51 commits)
  postcopy shared docs
  libvhost-user: Claim support for postcopy
  postcopy: Allow shared memory
  vhost: Huge page align and merge
  vhost+postcopy: Wire up POSTCOPY_END notify
  vhost-user: Add VHOST_USER_POSTCOPY_END message
  libvhost-user: mprotect & madvises for postcopy
  vhost+postcopy: Call wakeups
  vhost+postcopy: Add vhost waker
  postcopy: postcopy_notify_shared_wake
  postcopy: helper for waking shared
  vhost+postcopy: Resolve client address
  postcopy-ram: add a stub for postcopy_request_shared_page
  vhost+postcopy: Helper to send requests to source for shared pages
  vhost+postcopy: Stash RAMBlock and offset
  vhost+postcopy: Send address back to qemu
  libvhost-user+postcopy: Register new regions with the ufd
  migration/ram: ramblock_recv_bitmap_test_byte_offset
  postcopy+vhost-user: Split set_mem_table for postcopy
  vhost+postcopy: Transmit 'listen' to slave
  ...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

# Conflicts:
#	scripts/update-linux-headers.sh
2018-03-20 15:48:34 +00:00
Dr. David Alan Gilbert c639187e33 vhost-user: Add VHOST_USER_POSTCOPY_END message
This message is sent just before the end of postcopy to get the
client to stop using userfault since we wont respond to any more
requests.  It should close userfaultfd so that any other pages
get mapped to the backing file automatically by the kernel, since
at this point we know we've received everything.

Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2018-03-20 16:40:37 +02:00
Dr. David Alan Gilbert 9bb3801994 vhost+postcopy: Send address back to qemu
We need a better way, but at the moment we need the address of the
mappings sent back to qemu so it can interpret the messages on the
userfaultfd it reads.

This is done as a 3 stage set:
   QEMU -> client
      set_mem_table

   mmap stuff, get addresses

   client -> qemu
       here are the addresses

   qemu -> client
       OK - now you can use them

That ensures that qemu has registered the new addresses in it's
userfault code before the client starts accessing them.

Note: We don't ask for the default 'ack' reply since we've got our own.

Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2018-03-20 05:03:28 +02:00
Dr. David Alan Gilbert 6864a7b5ac vhost+postcopy: Transmit 'listen' to slave
Notify the vhost-user slave on reception of the 'postcopy-listen'
event from the source.

Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2018-03-20 05:03:28 +02:00
Dr. David Alan Gilbert d3dff7a5a1 vhost-user: Add 'VHOST_USER_POSTCOPY_ADVISE' message
Wire up a notifier to send a VHOST_USER_POSTCOPY_ADVISE
message on an incoming advise.

Later patches will fill in the behaviour/contents of the
message.

Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2018-03-20 05:03:27 +02:00
Dr. David Alan Gilbert 9ccbfe14dd postcopy: Add vhost-user flag for postcopy and check it
Add a vhost feature flag for postcopy support, and
use the postcopy notifier to check it before allowing postcopy.

Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2018-03-20 05:03:27 +02:00
Peter Xu 378112b002 docs: update QMP documents for OOB commands
Update both the developer and spec for the new QMP OOB (Out-Of-Band)
command.

Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20180309090006.10018-2-peterx@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
[eblake: grammar tweaks]
Signed-off-by: Eric Blake <eblake@redhat.com>
2018-03-19 14:58:36 -05:00
Peter Maydell 58e2e17dba Block layer patches
-----BEGIN PGP SIGNATURE-----
 
 iQIcBAABAgAGBQJanYJPAAoJEH8JsnLIjy/WxjUQAJA+DTOmGXvaNpMs65BrU79K
 /r/iGVrzHv/RMLmrWMnqj96W9SnpMuiAP9hVLNsekqClY9q4ME4DpGcXhWfhSvF5
 FC51ehvFJdfo8cPorsevcqNj60iWebjcx3lFfUq2606UOyYih3oijYxr6gSwWbRc
 GAgdGMqsvGYpzgqAQVEWHUhaX0La49/OzY42aR+E+LCBNfTYvlydvyoc+tUTdIpW
 1eM/ASGndGsN0Cf2vxlbKgJ0/P6v+cRZuuIDhKZqre+YG+yM+pq7yZb+o7nf/P36
 TPR93BsT7FSVAizRK7VFRuPIynHpiaxYygrJERCXF0sxsV4OlKjpmt/uUPamWFh+
 46Jx2NK1AuAx87BdErgmA119ObO3oAPxK0+2p981obb6SphTbbPxDj6SOlYCt4mJ
 mhff4JtIiwCmDSckAwd2mkBI1Tvl9qqcELrpyd2t2eU4ec2vf7fPd85EsK/Mq6Kr
 dbfqFvjNaaMxChoqFgkHAveYJ7zYqRFI2IY5o9c1QyZehCGPWjScxHXZZYdpDl59
 YF9DkYQDOyvEX2jmMECaO1r/0nnO+BqQHu5ItJuTte9rjP9Q0do3iBISiIefewtf
 yji6/QNn2hFrnr1HPAwLFFC3kPgc8Mq8mIUb53j8vG/01KhVRCcnJm2K6D4IUwLZ
 S6ZnQJB97eE4y7YR5dNt
 =2axz
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/kevin/tags/for-upstream' into staging

Block layer patches

# gpg: Signature made Mon 05 Mar 2018 17:45:51 GMT
# gpg:                using RSA key 7F09B272C88F2FD6
# gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>"
# Primary key fingerprint: DC3D EB15 9A9A F95D 3D74  56FE 7F09 B272 C88F 2FD6

* remotes/kevin/tags/for-upstream: (38 commits)
  block: Fix NULL dereference on empty drive error
  qcow2: Replace align_offset() with ROUND_UP()
  block/ssh: Add basic .bdrv_truncate()
  block/ssh: Make ssh_grow_file() blocking
  block/ssh: Pull ssh_grow_file() from ssh_create()
  qemu-img: Make resize error message more general
  qcow2: make qcow2_co_create2() a coroutine_fn
  block: rename .bdrv_create() to .bdrv_co_create_opts()
  Revert "IDE: Do not flush empty CDROM drives"
  block: test blk_aio_flush() with blk->root == NULL
  block: add BlockBackend->in_flight counter
  block: extract AIO_WAIT_WHILE() from BlockDriverState
  aio: rename aio_context_in_iothread() to in_aio_context_home_thread()
  docs: document how to use the l2-cache-entry-size parameter
  specs/qcow2: Fix documentation of the compressed cluster descriptor
  iotest 033: add misaligned write-zeroes test via truncate
  block: fix write with zero flag set and iovector provided
  block: Drop unused .bdrv_co_get_block_status()
  vvfat: Switch to .bdrv_co_block_status()
  vpc: Switch to .bdrv_co_block_status()
  ...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

# Conflicts:
#	include/block/block.h
2018-03-06 11:20:44 +00:00
Markus Armbruster eb815e248f qapi: Move qapi-schema.json to qapi/, rename generated files
Move qapi-schema.json to qapi/, so it's next to its modules, and all
files get generated to qapi/, not just the ones generated for modules.

Consistently name the generated files qapi-MODULE.EXT:
qmp-commands.[ch] become qapi-commands.[ch], qapi-event.[ch] become
qapi-events.[ch], and qmp-introspect.[ch] become qapi-introspect.[ch].
This gets rid of the temporary hacks in scripts/qapi/commands.py,
scripts/qapi/events.py, and scripts/qapi/common.py.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20180211093607.27351-28-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com>
[eblake: Fix trailing dot in tpm.c, undo temporary hack for OSX toolchain]
Signed-off-by: Eric Blake <eblake@redhat.com>
2018-03-02 13:45:57 -06:00
Markus Armbruster bb46af41b9 docs: Correct outdated information on QAPI
* Fix guidance on error classes

* Point to generated documentation

* Drop plea for documentation, because the QAPI code generator
  enforces it since commit 3313b6124b

* Minor tweaks here and there

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20180211093607.27351-27-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
2018-03-02 13:45:51 -06:00