Commit Graph

127 Commits

Author SHA1 Message Date
Anthony Liguori 7267c0947d Use glib memory allocation and free functions
qemu_malloc/qemu_free no longer exist after this commit.

Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-08-20 23:01:08 -05:00
Anthony Liguori e374560232 Merge remote-tracking branch 'kraxel/migration.2' into staging 2011-07-29 09:39:37 -05:00
Blue Swirl 00aa0040e8 Wrap recv to avoid warnings
Avoid warnings like these by wrapping recv():
  CC    slirp/ip_icmp.o
/src/qemu/slirp/ip_icmp.c: In function 'icmp_receive':
/src/qemu/slirp/ip_icmp.c:418:5: error: passing argument 2 of 'recv' from incompatible pointer type [-Werror]
/usr/local/lib/gcc/i686-mingw32msvc/4.6.0/../../../../i686-mingw32msvc/include/winsock2.h:547:32: note: expected 'char *' but argument is of type 'struct icmp *'

Remove also casts used to avoid warnings.

Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-07-25 14:38:56 +00:00
Gerd Hoffmann 2837c8ea1f vmstate: add no_migrate flag to VMStateDescription
This allows to easily tag devices as non-migratable,
so any attempt to migrate a virtual machine with the
device in question active will make migration fail.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2011-07-20 09:23:33 +02:00
Jan Kiszka 5a8a49d7aa Reset system before loadvm
In case we load the vmstate during incoming migration, we start from a
clean, default machine state as we went through system reset before. But
if we load from a snapshot, the machine can be in any state. That can
cause troubles if loading an older image which does not carry all state
information the executing QEMU requires. Hardly any device takes care of
this scenario.

However, fixing this is trivial. We just need to issue a system reset
during loadvm as well.

Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2011-06-16 11:42:40 -03:00
Alexandre Raymond 9bf0960a9a Fix compilation warning due to missing header for sigaction (followup)
This patch removes all references to signal.h when qemu-common.h is included
as they become redundant.

Signed-off-by: Alexandre Raymond <cerbere@gmail.com>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
2011-06-08 09:04:29 +01:00
Stefan Weil 61cc8701f3 Fix some typos in comments and documentation
helpfull -> helpful
usefull -> useful
cotrol -> control

and a grammar fix.

Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
2011-04-16 12:24:28 +01:00
Blue Swirl 17a4663e2d Move CPU related functions to cpus.h
Move declarations of CPU related functions to cpus.h. Adjust the only user.

Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-04-15 20:14:52 +00:00
Juan Quintela b784421ce4 Fix migration uint8 arrys handled
commit 82fa39b751

only contains half of the fix.  It forgots the save state fix for
UINT8 indexes.

Anthony, please apply, without this migration using hpet is broken.
(only current user).

Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-03-21 17:41:52 -05:00
Aurelien Jarno aa315f95b7 Merge branch 'for-anthony' of git://github.com/bonzini/qemu
* 'for-anthony' of git://github.com/bonzini/qemu:
  remove qemu_get_clock
  add a generic scaling mechanism for timers
  change all other clock references to use nanosecond resolution accessors
  change all rt_clock references to use millisecond resolution accessors
  add more helper functions with explicit milli/nanosecond resolution
2011-03-21 21:28:38 +01:00
Paolo Bonzini 7447545544 change all other clock references to use nanosecond resolution accessors
This was done with:

    sed -i 's/qemu_get_clock\>/qemu_get_clock_ns/' \
        $(git grep -l 'qemu_get_clock\>' )
    sed -i 's/qemu_new_timer\>/qemu_new_timer_ns/' \
        $(git grep -l 'qemu_new_timer\>' )

after checking that get_clock and new_timer never occur twice
on the same line.  There were no missed occurrences; however, even
if there had been, they would have been caught by the compiler.

There was exactly one false positive in qemu_run_timers:

     -    current_time = qemu_get_clock (clock);
     +    current_time = qemu_get_clock_ns (clock);

which is of course not in this patch.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2011-03-21 09:23:23 +01:00
Paolo Bonzini 7bd427d801 change all rt_clock references to use millisecond resolution accessors
This was done with:

    sed -i '/get_clock\>.*rt_clock/s/get_clock\>/get_clock_ms/' \
        $(git grep -l 'get_clock\>.*rt_clock' )
    sed -i '/new_timer\>.*rt_clock/s/new_timer\>/new_timer_ms/' \
        $(git grep -l 'new_timer\>.*rt_clock' )

after checking that get_clock and new_timer never occur twice
on the same line.  There were no missed occurrences; however, even
if there had been, they would have been caught by the compiler.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2011-03-21 09:23:23 +01:00
Kevin Wolf e11480db7f Add error message for loading snapshot without VM state
It already fails, but it didn't tell the user why.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
2011-03-15 13:21:14 +01:00
Juan Quintela a624b08663 vmstate: add UINT32 VARRAYS
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-03-10 16:12:26 -06:00
Juan Quintela 82fa39b751 vmstate: Fix varrays with uint8 indexes
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-03-10 16:12:26 -06:00
Juan Quintela 9122a8fed7 vmstate: add VMSTATE_UINT32_EQUAL
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-03-10 16:12:25 -06:00
Jan Kiszka e07bbac542 Improve vm_stop reason declarations
Define and use dedicated constants for vm_stop reasons, they actually
have nothing to do with the EXCP_* defines used so far. At this chance,
specify more detailed reasons so that VM state change handlers can
evaluate them.

Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2011-02-14 12:39:46 -02:00
Yoshiaki Tamura eb60260de0 savevm: fix corruption in vmstate_subsection_load().
Although it's rare to happen in live migration, when the head of a
byte stream contains 0x05 which is the marker of subsection, the
loader gets corrupted because vmstate_subsection_load() continues even
the device doesn't require it.  This patch adds a checker whether
subsection is needed, and skips following routines if not needed.

Signed-off-by: Yoshiaki Tamura <tamura.yoshiaki@lab.ntt.co.jp>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-02-04 06:33:26 -06:00
Markus Armbruster 27d6bf40ed blockdev: Fix regression in -drive if=scsi,index=N
Before commit 622b520f, index=12 meant bus=1,unit=5.

Since the commit, it means bus=0,unit=12.  The drive is created, but
not the guest device.  That's because the controllers we use with
if=scsi drives (lsi53c895a and esp) support only 7 units, and
scsi_bus_legacy_handle_cmdline() ignores drives with unit numbers
exceeding that limit.

Changing the mapping of index to bus, unit is a regression.  Breaking
-drive invocations that used to work just makes it worse.

Revert the part of commit 622b520f that causes this, and clean up
some.

Note that the fix only affects if=scsi.  You can still put more than 7
units on a SCSI bus with -device & friends.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-01-31 10:42:42 +01:00
Alex Williamson dc9121210e savevm: Fix no_migrate
The no_migrate save state flag is currently only checked in the
last phase of migration.  This means that we potentially waste
a lot of time and bandwidth with the live state handlers before
we ever check the no_migrate flags.  The error message printed
when we catch a non-migratable device doesn't get printed for
a detached migration.  And, no_migrate does nothing to prevent
an incoming migration to a target that includes a non-migratable
device.  This attempts to fix all of these.

One notable difference in behavior is that an outgoing migration
now checks for non-migratable devices before ever connecting to
the target system.  This means the target will remain listening
rather than exit from failure.

Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2011-01-17 18:22:17 +02:00
Michael S. Tsirkin eff06c40d3 migration/savevm: no need to flush requests
There's no need to flush requests after vmstop
as vmstop does it for us automatically now.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Tested-by: Jason Wang <jasowang@redhat.com>
2010-12-09 12:47:48 +02:00
Michael S. Tsirkin 3d002df33e migration: allow rate > 4g
I'd like to disable bandwidth limit or make it very high,
Use int64_t all over to make values >= 4g work.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Tested-by: Jason Wang <jasowang@redhat.com>
2010-12-02 21:13:39 +02:00
Gerd Hoffmann cdae5cfbd3 add VMSTATE_BOOL
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: malc <av1474@comtv.ru>
2010-11-01 17:57:12 +03:00
Blue Swirl 49a2942d9b Delete write only variables
Compiling with GCC 4.6.0 20100925 produced warnings like:
/src/qemu/net/tap-win32.c: In function 'tap_win32_open':
/src/qemu/net/tap-win32.c:582:12: error: variable 'hThread' set but not used [-Werror=unused-but-set-variable]

Fix by removing the unused variables.

Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-10-13 18:41:29 +00:00
Blue Swirl d7d9b528b1 Fix OpenBSD build warning
Fix this warning:
  CC    savevm.o
/src/qemu/savevm.c: In function `do_savevm':
/src/qemu/savevm.c:1900: warning: passing arg 1 of `localtime_r' from incompatible pointer type

It looks like on OpenBSD the type of tv_sec in struct timeval is still
'long' instead of time_t as in most other OS. Fix by adding a cast.

Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-09-09 19:13:04 +00:00
Miguel Di Ciurcio Filho 7d631a116a savevm: Generate a name when run without one
When savevm is run without a name, the name stays blank and the snapshot is
saved anyway.

The new behavior is when savevm is run without parameters a name will be
created automaticaly, so the snapshot is accessible to the user without needing
the id when loadvm is run.

(qemu) savevm
(qemu) info snapshots
ID        TAG                 VM SIZE                DATE       VM CLOCK
1         vm-20100728134640      978K 2010-07-28 13:46:40   00:00:08.603

We use a name with the format 'vm-YYYYMMDDHHMMSS'.

This is a first step to hide the internal id, because I don't see a reason to
expose this kind of internals to the user.

Signed-off-by: Miguel Di Ciurcio Filho <miguel.filho@gmail.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2010-08-30 18:29:23 +02:00
Miguel Di Ciurcio Filho f920991574 monitor: make 'info snapshots' show only fully available snapshots
The output generated by 'info snapshots' shows only snapshots that exist on the
block device that saves the VM state. This output can cause an user to
erroneously try to load an snapshot that is not available on all block devices.

$ qemu-img snapshot -l xxtest.qcow2
Snapshot list:
ID        TAG                 VM SIZE                DATE       VM CLOCK
1                                1.5M 2010-07-26 16:51:52   00:00:08.599
2                                1.5M 2010-07-26 16:51:53   00:00:09.719
3                                1.5M 2010-07-26 17:26:49   00:00:13.245
4                                1.5M 2010-07-26 19:01:00   00:00:46.763

$ qemu-img snapshot -l xxtest2.qcow2
Snapshot list:
ID        TAG                 VM SIZE                DATE       VM CLOCK
3                                   0 2010-07-26 17:26:49   00:00:13.245
4                                   0 2010-07-26 19:01:00   00:00:46.763

Current output:
$ qemu -hda xxtest.qcow2 -hdb xxtest2.qcow2 -monitor stdio -vnc :0
QEMU 0.12.4 monitor - type 'help' for more information
(qemu) info snapshots
Snapshot devices: ide0-hd0
Snapshot list (from ide0-hd0):
ID        TAG                 VM SIZE                DATE       VM CLOCK
1                                1.5M 2010-07-26 16:51:52   00:00:08.599
2                                1.5M 2010-07-26 16:51:53   00:00:09.719
3                                1.5M 2010-07-26 17:26:49   00:00:13.245
4                                1.5M 2010-07-26 19:01:00   00:00:46.763

Snapshots 1 and 2 do not exist on xxtest2.qcow, but they are displayed anyway.

This patch sumarizes the output to only show fully available snapshots.

New output:
(qemu) info snapshots
ID        TAG                 VM SIZE                DATE       VM CLOCK
3                                1.5M 2010-07-26 17:26:49   00:00:13.245
4                                1.5M 2010-07-26 19:01:00   00:00:46.763

Signed-off-by: Miguel Di Ciurcio Filho <miguel.filho@gmail.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2010-08-30 18:29:23 +02:00
Cam Macdonell 2431296806 Support marking a device as non-migratable
A non-migratable device should be removed before migration and re-added after.

Signed-off-by: Cam Macdonell <cam@cs.ualberta.ca>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-08-10 16:25:15 -05:00
Miguel Di Ciurcio Filho f0aa7a8b2d loadvm: improve tests before bdrv_snapshot_goto()
This patch improves the resilience of the load_vmstate() function, doing
further and better ordered tests.

In load_vmstate(), if there is any error on bdrv_snapshot_goto(), except if the
error is on VM state device, load_vmstate() will return zero and the VM will be
started with major corruption chances.

The current process:
- test if there is any writable device without snapshot support
    - if exists return -error
- get the device that saves the VM state, possible return -error but unlikely
because it was tested earlier
- flush I/O
- run bdrv_snapshot_goto() on devices
    - if fails, give an warning and goes to the next (not good!)
    - if fails on the VM state device, return zero (not good!)
- check if the requested snapshot exists on the device that saves the VM state
and the state is not zero
    - if fails return -error
- open the file with the VM state
    - if fails return -error
- load the VM state
    - if fails return -error
- return zero

New behavior:
- get the device that saves the VM state
    - if fails return -error
- check if the requested snapshot exists on the device that saves the VM state
and the state is not zero
    - if fails return -error
- test if there is any writable device without snapshot support
    - if exists return -error
- test if the devices with snapshot support have the requested snapshot
    - if anyone fails, return -error
- flush I/O
- run snapshot_goto() on devices
    - if anyone fails, return -error
- open the file with the VM state
    - if fails return -error
- load the VM state
    - if fails return -error
- return zero

do_loadvm must not call vm_start if any error has occurred in load_vmstate.

Signed-off-by: Miguel Di Ciurcio Filho <miguel.filho@gmail.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2010-08-03 15:57:22 +02:00
Alex Williamson 69e58af92c savevm: Fix memory leak of compat struct
Forgot to check for and free these.

Found-by: Zachary Amsden <zamsden@redhat.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-07-30 23:00:56 +02:00
Juan Quintela 811814bd28 vmstate: add subsections code
This commit adds subsections for each device section.
Subsections is the way to handle information that don't need to be sent
to de destination of a migration because its values are not needed.  It is
the way to handle optional information.  Notice that only the source can
decide if the information is optional or not.  The destination needs to
understand all subsections that it receives to have a sucessful load.

Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-07-26 16:19:51 -05:00
Alex Williamson 7685ee6abc savevm: Make use of DeviceState
For callers that pass a device we can traverse up the qdev tree and
make use of the BusInfo.get_dev_path information for creating unique
savevm id strings.  This avoids needing to rely on the instance number,
which can cause problems with device initialization order and hotplug.

For compatibility, we also store away the old id string and instance
so we can accept migrations from VMs as we add new get_dev_path
implementations.

Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-07-06 10:36:28 -05:00
Alex Williamson 0be71e324f savevm: Add DeviceState param
When available, we'd like to be able to access the DeviceState
when registering a savevm.  For buses with a get_dev_path()
function, this will allow us to create more unique savevm
id strings.

Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-07-06 10:36:28 -05:00
Markus Armbruster f9092b108f savevm: Survive hot-unplug of snapshot device
savevm.c keeps a pointer to the snapshot block device.  If you manage
to get that device deleted, the pointer dangles, and the next snapshot
operation will crash & burn.  Unplugging a guest device that uses it
does the trick:

    $ MALLOC_PERTURB_=234 qemu-system-x86_64 [...]
    QEMU 0.12.50 monitor - type 'help' for more information
    (qemu) info snapshots
    No available block device supports snapshots
    (qemu) drive_add auto if=none,file=tmp.qcow2
    OK
    (qemu) device_add usb-storage,id=foo,drive=none1
    (qemu) info snapshots
    Snapshot devices: none1
    Snapshot list (from none1):
    ID        TAG                 VM SIZE                DATE       VM CLOCK
    (qemu) device_del foo
    (qemu) info snapshots
    Snapshot devices:
    Segmentation fault (core dumped)

Move management of that pointer to block.c, and zap it when the device
it points becomes unusable.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2010-07-02 13:18:02 +02:00
Markus Armbruster dbc13590f6 block: Decouple savevm from DriveInfo
We find snapshots by iterating over the list of drives defined with
drive_init().  This misses host block devices defined by other means.
Such means don't exist now, but will be introduced later in this
series.

Iterate over all host block devices instead, with bdrv_next().

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2010-06-15 09:41:59 +02:00
Miguel Di Ciurcio Filho feeee5aca7 savevm: Really verify if a drive supports snapshots
Both bdrv_can_snapshot() and bdrv_has_snapshot() does not work as advertized.

First issue: Their names implies different porpouses, but they do the same thing
and have exactly the same code. Maybe copied and pasted and forgotten?
bdrv_has_snapshot() is called in various places for actually checking if there
is snapshots or not.

Second issue: the way bdrv_can_snapshot() verifies if a block driver supports or
not snapshots does not catch all cases. E.g.: a raw image.

So when do_savevm() is called, first thing it does is to set a global
BlockDriverState to save the VM memory state calling get_bs_snapshots().

static BlockDriverState *get_bs_snapshots(void)
{
    BlockDriverState *bs;
    DriveInfo *dinfo;

    if (bs_snapshots)
        return bs_snapshots;
    QTAILQ_FOREACH(dinfo, &drives, next) {
        bs = dinfo->bdrv;
        if (bdrv_can_snapshot(bs))
            goto ok;
    }
    return NULL;
 ok:
    bs_snapshots = bs;
    return bs;
}

bdrv_can_snapshot() may return a BlockDriverState that does not support
snapshots and do_savevm() goes on.

Later on in do_savevm(), we find:

    QTAILQ_FOREACH(dinfo, &drives, next) {
        bs1 = dinfo->bdrv;
        if (bdrv_has_snapshot(bs1)) {
            /* Write VM state size only to the image that contains the state */
            sn->vm_state_size = (bs == bs1 ? vm_state_size : 0);
            ret = bdrv_snapshot_create(bs1, sn);
            if (ret < 0) {
                monitor_printf(mon, "Error while creating snapshot on '%s'\n",
                               bdrv_get_device_name(bs1));
            }
        }
    }

bdrv_has_snapshot(bs1) is not checking if the device does support or has
snapshots as explained above. Only in bdrv_snapshot_create() the device is
actually checked for snapshot support.

So, in cases where the first device supports snapshots, and the second does not,
the snapshot on the first will happen anyways. I believe this is not a good
behavior. It should be an all or nothing process.

This patch addresses these issues by making bdrv_can_snapshot() actually do
what it must do and enforces better tests to avoid errors in the middle of
do_savevm(). bdrv_has_snapshot() is removed and replaced by bdrv_can_snapshot()
where appropriate.

bdrv_can_snapshot() was moved from savevm.c to block.c. It makes more sense to me.

The loadvm_state() function was updated too to enforce that when loading a VM at
least all writable devices must support snapshots too.

Signed-off-by: Miguel Di Ciurcio Filho <miguel.filho@gmail.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2010-06-15 09:41:58 +02:00
Markus Armbruster 666daa6823 blockdev: Collect block device code in new blockdev.c
Anything that moves hundreds of lines out of vl.c can't be all bad.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2010-06-04 15:20:47 +02:00
Anthony Liguori 41ef56e611 migration: respect exit status with exec:
This patch makes sure that if the exec: process exits with a non-zero return
status, we treat the migration as failed.

This fixes https://bugs.launchpad.net/qemu/+bug/391879

Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-06-03 14:55:45 -05:00
Jan Kiszka 4d2ffa08b6 vmstate: Add support for alias ID
Some legacy users (mostly PC devices) of vmstate_register manage
instance IDs on their own, and that unfortunately in a way that is
incompatible with automatically generated ones. This so far prevents
switching those users to vmstates that are registered by qdev.

To establish a migration path, this patch introduces the concept of
alias IDs. They can be passed to an extended vmstate registration
service, and qdev provides a set service to be used during device init.
find_se will consider the alias in addition to the default ID. We can
then start generating the default ID automatically and writing it on
vmsave, thus converting that format without breaking support for upward
migration.

The user is required specify the highest vmstate version for which the
alias is required. Once this version falls behind the minimum required
for a specific vmstate, an assertion triggers to motivate cleaning up
the obsolete alias.

Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-05-15 14:23:31 +00:00
Jan Kiszka ec86f3e1af vmstate: Drop unused post_save handler
No device makes use of it anymore.

Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-05-15 14:02:39 +00:00
Stefan Berger f8778a7785 Fix the RARP protocol ID
The packet(s) sent out after migration are supposed to be RAPR type of
packets. If they are supposed to go anywhere useful, the RAPR ethernet
identifier needs to be fix.

Also see http://www.iana.org/assignments/ethernet-numbers for 0x8035 for
RARP.

Signed-off-by: Stefan Berger <stefanb@us.ibm.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-05-03 12:09:48 -05:00
Anthony Liguori 4a39943bd1 Merge remote branch 'markus/qerror' into staging 2010-03-17 09:44:37 -05:00
Markus Armbruster 1ecda02b24 error: Replace qemu_error() by error_report()
error_report() terminates the message with a newline.  Strip it it
from its arguments.

This fixes a few error messages lacking a newline:
net_handle_fd_param()'s "No file descriptor named %s found", and
tap_open()'s "vnet_hdr=1 requested, but no kernel support for
IFF_VNET_HDR available" (all three versions).

There's one place that passes arguments without newlines
intentionally: load_vmstate().  Fix it up.
2010-03-16 16:58:32 +01:00
Markus Armbruster 03cd4655cb savevm: Fix -loadvm to report errors to stderr, not the monitor
A monitor may not even exist.

Change load_vmstate() to use qemu_error() instead of monitor_printf().
Parameter mon is now unused, remove it.
2010-03-16 16:55:05 +01:00
Blue Swirl 090414a30c Fix a typo in error message
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-03-13 11:36:09 +00:00
Jan Kiszka ea375f9ab8 KVM: Rework VCPU state writeback API
This grand cleanup drops all reset and vmsave/load related
synchronization points in favor of four(!) generic hooks:

- cpu_synchronize_all_states in qemu_savevm_state_complete
  (initial sync from kernel before vmsave)
- cpu_synchronize_all_post_init in qemu_loadvm_state
  (writeback after vmload)
- cpu_synchronize_all_post_init in main after machine init
- cpu_synchronize_all_post_reset in qemu_system_reset
  (writeback after system reset)

These writeback points + the existing one of VCPU exec after
cpu_synchronize_state map on three levels of writeback:

- KVM_PUT_RUNTIME_STATE (during runtime, other VCPUs continue to run)
- KVM_PUT_RESET_STATE   (on synchronous system reset, all VCPUs stopped)
- KVM_PUT_FULL_STATE    (on init or vmload, all VCPUs stopped as well)

This level is passed to the arch-specific VCPU state writing function
that will decide which concrete substates need to be written. That way,
no writer of load, save or reset functions that interact with in-kernel
KVM states will ever have to worry about synchronization again. That
also means that a lot of reasons for races, segfaults and deadlocks are
eliminated.

cpu_synchronize_state remains untouched, just as Anthony suggested. We
continue to need it before reading or writing of VCPU states that are
also tracked by in-kernel KVM subsystems.

Consequently, this patch removes many cpu_synchronize_state calls that
are now redundant, just like remaining explicit register syncs.

Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-03-04 00:29:28 -03:00
Marcelo Tosatti f139a41256 fix savevm command without id or tag
savevm without id or tag segfaults in:

(gdb) bt
#0  0x00007f600a83bf8a in __strcmp_sse42 () from /lib64/libc.so.6
#1  0x00000000004745b6 in bdrv_snapshot_find (bs=<value optimized out>,
    sn_info=0x7fff996be280, name=0x0) at savevm.c:1631
#2  0x0000000000475c80 in del_existing_snapshots (name=<value optimized out>,
    mon=<value optimized out>) at savevm.c:1654
#3  do_savevm (name=<value optimized out>, mon=<value optimized out>)

Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-01-26 15:45:06 -06:00
Kirill A. Shutemov 5fdb3aa16a savevm.c: fix warning with _FORTIFY_SOURCE
CC    savevm.o
cc1: warnings being treated as errors
savevm.c: In function 'file_put_buffer':
savevm.c:342: error: ignoring return value of 'fwrite', declared with attribute warn_unused_result
make: *** [savevm.o] Error 1

Signed-off-by: Kirill A. Shutemov <kirill@shutemov.name>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2009-12-25 18:19:19 +00:00
Jan Kiszka 90697be889 live migration: Serialize vmstate saving in stage 2
The effect of this patch with current block migration is that its stage
2, ie. the first full walk-through of the block devices will be
performed completely before RAM migration starts. This ensures that
continuously changing RAM pages are not re-synchronized all the time
while block migration is not completed.

Future versions of block migration which will respect the specified
downtime will generate a different pattern: After RAM migration has
started as well, block migration may also continue to inject dirty
blocks into the RAM stream once it detects that the number of pending
blocks would extend the downtime unacceptably.

Note that all this relies on the current registration order: block
before RAM migration.

Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-12-03 11:45:49 -06:00
Jan Kiszka f327aa0c60 live migration: Propagate output monitor to callback handler
In order to allow proper progress reporting to the monitor that
initiated the migration, forward the monitor reference through the
migration layer down to SaveLiveStateHandler.

Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-12-03 10:48:53 -06:00