This patch introduces the blk_drain() function which allows to replace
blk_drain_all() when only one BlockDriverState needs to be drained.
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Cornelia Huck <cornelia.huck@de.ibm.com>
Cc: Kevin Wolf <kwolf@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Alexander Yarygin <yarygin@linux.vnet.ibm.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Acked-by: Kevin Wolf <kwolf@redhat.com>
Message-id: 1434537440-28236-2-git-send-email-yarygin@linux.vnet.ibm.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Calling throttle_group_config() cancels all timers from a particular
BlockDriverState, so any_timer_armed[] should be updated accordingly.
However, with the current code it may happen that a timer is armed in
a different BlockDriverState from the same group, so any_timer_armed[]
would be set to false in a situation where there is still a timer
armed.
The consequence is that we might end up with two timers armed. This
should not have any noticeable impact however, since all accesses to
the ThrottleGroup are protected by a lock, and the situation would
become normal again shortly thereafter as soon as all timers have been
fired.
The correct way to solve this is to check that we're actually
cancelling a timer before updating any_timer_armed[].
Signed-off-by: Alberto Garcia <berto@igalia.com>
Message-id: 1434382875-3998-1-git-send-email-berto@igalia.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
After the commit 9b536adc ("block: acquire AioContext in
bdrv_drain_all()") the aio_poll() function got called for every
BlockDriverState, in assumption that every device may have its own
AioContext. If we have thousands of disks attached, there are a lot of
BlockDriverStates but only a few AioContexts, leading to tons of
unnecessary aio_poll() calls.
This patch changes the bdrv_drain_all() function allowing it find shared
AioContexts and to call aio_poll() only for unique ones.
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Cornelia Huck <cornelia.huck@de.ibm.com>
Cc: Kevin Wolf <kwolf@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Alexander Yarygin <yarygin@linux.vnet.ibm.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Tested-by: Christian Borntraeger <borntraeger@de.ibm.com>
Message-id: 1433936297-7098-4-git-send-email-yarygin@linux.vnet.ibm.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=v038
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/armbru/tags/pull-monitor-2015-06-22' into staging
Monitor patches
# gpg: Signature made Mon Jun 22 18:56:18 2015 BST using RSA key ID EB918653
# gpg: Good signature from "Markus Armbruster <armbru@redhat.com>"
# gpg: aka "Markus Armbruster <armbru@pond.sub.org>"
* remotes/armbru/tags/pull-monitor-2015-06-22: (24 commits)
Include monitor/monitor.h exactly where needed
Include qapi/qmp/qerror.h exactly where needed
qerror: Move #include out of qerror.h
qerror: Finally unused, clean up
qmp: Wean off qerror_report()
tpm: Avoid qerror_report() outside QMP command handlers
qerror: Clean up QERR_ macros to expand into a single string
qerror: Eliminate QERR_DEVICE_NOT_FOUND
vl: Use error_report() for --display errors
vl: Avoid qerror_report() outside QMP command handlers
QemuOpts: Wean off qerror_report_err()
qdev-monitor: Propagate errors through qdev_device_add()
qdev-monitor: Propagate errors through set_property()
qdev-monitor: Convert qbus_find() to Error
qdev-monitor: Fix check for full bus
qdev-monitor: Stop error avalanche in qbus_find_recursive()
disas: Remove uses of CPU env
monitor: Split mon_get_cpu fn to remove ENV_GET_CPU
monitor: Fix failure path for "S" argument
monitor: Point to "help" command on syntax error
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
In particular, don't include it into headers.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
In particular, don't include it into headers.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
Remove it except for two things in qerror.h:
* Two #include to be cleaned up separately to avoid cluttering this
patch.
* The QERR_ macros. Mark as obsolete.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
The traditional QMP command handler interface
int qmp_FOO(Monitor *mon, const QDict *params, QObject **ret_data);
doesn't provide for returning an Error object. Instead, the handler
is expected to stash it in the monitor with qerror_report().
When we rebased QMP on top of QAPI, we didn't change this interface.
Instead, commit 776574d introduced "middle mode" as a temporary aid
for converting existing QMP commands to QAPI one by one. More than
three years later, we're still using it.
Middle mode has two effects:
* Instead of the native input marshallers
static void qmp_marshal_input_FOO(QDict *, QObject **, Error **)
it generates input marshallers conforming to the traditional QMP
command handler interface.
* It suppresses generation of code to register them with
qmp_register_command()
This permits giving them internal linkage.
As long as we need qmp-commands.hx, we can't use the registry behind
qmp_register_command(), so the latter has to stay for now.
The former has to go to get rid of qerror_report(). Changing all QMP
commands to fit the QAPI mold in one go was impractical back when we
started, but by now there are just a few stragglers left:
do_qmp_capabilities(), qmp_qom_set(), qmp_qom_get(), qmp_object_add(),
qmp_netdev_add(), do_device_add().
Switch middle mode to generate native input marshallers, and adapt the
stragglers. Simplifies both the monitor code and the stragglers.
Rename do_qmp_capabilities() to qmp_capabilities(), and
do_device_add() to qmp_device_add, because that's how QMP command
handlers are named today.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
qerror_report() is a transitional interface to help with converting
existing monitor commands to QMP. It should not be used elsewhere.
Replace by error_report().
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
These macros expand into error class enumeration constant, comma,
string. Unclean. Has been that way since commit 13f59ae.
The error class is always ERROR_CLASS_GENERIC_ERROR since the previous
commit.
Clean up as follows:
* Prepend every use of a QERR_ macro by ERROR_CLASS_GENERIC_ERROR, and
delete it from the QERR_ macro. No change after preprocessing.
* Rewrite error_set(ERROR_CLASS_GENERIC_ERROR, ...) into
error_setg(...). Again, no change after preprocessing.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
Error classes other than ERROR_CLASS_GENERIC_ERROR should not be used
in new code. Hiding them in QERR_ macros makes new uses hard to spot.
Fortunately, there's just one such macro left. Eliminate it with this
coccinelle semantic patch:
@@
expression EP, E;
@@
-error_set(EP, QERR_DEVICE_NOT_FOUND, E)
+error_set(EP, ERROR_CLASS_DEVICE_NOT_FOUND, "Device '%s' not found", E)
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
Results in nicer error messages. Before this patch:
Invalid GTK option string: gtk,lirum-larum
After:
qemu-system-x86_64: -display gtk,lirum-larum: Invalid GTK option string
Of course, the thing ought to use QemuOpts instead of parsing by hand.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
qerror_report() is a transitional interface to help with converting
existing monitor commands to QMP. It should not be used elsewhere.
Replace by error_report() in initial startup helpers parse_sandbox()
and parse_add_fd().
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
qerror_report_err() is a transitional interface to help with
converting existing monitor commands to QMP. It should not be used
elsewhere.
The only remaining user in qemu-option.c is qemu_opts_parse(). Is it
used in QMP context? If not, we can simply replace
qerror_report_err() by error_report_err().
The uses in qemu-img.c, qemu-io.c, qemu-nbd.c and under tests/ are
clearly not in QMP context.
The uses in vl.c aren't either, because the only QMP command handlers
there are qmp_query_status() and qmp_query_machines(), and they don't
call it.
Remaining uses:
* drive_def(): Command line -drive and such, HMP drive_add and pci_add
* hmp_chardev_add(): HMP chardev-add
* monitor_parse_command(): HMP core
* tmp_config_parse(): Command line -tpmdev
* net_host_device_add(): HMP host_net_add
* net_client_parse(): Command line -net and -netdev
* qemu_global_option(): Command line -global
* vnc_parse_func(): Command line -display, -vnc, default display, HMP
change, QMP change. Bummer.
* qemu_pci_hot_add_nic(): HMP pci_add
* usb_net_init(): Command line -usbdevice, HMP usb_add
Propagate errors through qemu_opts_parse(). Create a convenience
function qemu_opts_parse_noisily() that passes errors to
error_report_err(). Switch all non-QMP users outside tests to it.
That leaves vnc_parse_func(). Propagate errors through it. Since I'm
touching it anyway, rename it to vnc_parse().
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
Also polish an error message while I'm touching the line anyway,
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Andreas Färber <afaerber@suse.de>
As usual, the conversion breaks printing explanatory messages after
the error: actual printing of the error gets delayed, so the
explanations precede rather than follow it.
Pity. Disable them for now. See also commit 7216ae3.
While there, eliminate QERR_BUS_NOT_FOUND, and clean up unusual
spelling in the error message.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Property bus has always been too screwed up to be really usable for
values other than plain bus IDs. This just fixes a bug that crept in
in commit 1395af6 "qdev: add a maximum device allowed field for the
bus."
It doesn't always fail when it should:
$ qemu-system-x86_64 -nodefaults -device virtio-serial-pci -device virtio-rng-device,bus=pci.0/virtio-serial-pci/virtio-bus
Happily plugs the virtio-rng-device into the virtio-bus provided by
virtio-serial-pci, even though its only slot is already occupied by a
virtio-serial-device.
And sometimes fails when it shouldn't:
$ qemu-system-x86_64 -nodefaults -device virtio-serial-pci -device virtserialport,bus=virtio-bus/virtio-serial-device
Yes, the virtio-bus is full, but the virtio-serial-bus provided by
virtio-serial-device isn't, and that's the one we're trying to use.
Root cause: we check "bus full" when we resolve the first element of
the path. That's the correct one only when it's also the last one.
Fix by moving the "bus full" check to right before we return a bus.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reproducer:
$ qemu-system-x86_64 -nodefaults -device virtio-rng-pci -device virtio-rng-pci -device virtio-rng-device,bus=virtio-bus
qemu-system-x86_64: -device virtio-rng-device,bus=virtio-bus: Bus 'virtio-bus' is full
qemu-system-x86_64: -device virtio-rng-device,bus=virtio-bus: Bus 'virtio-bus' is full
qemu-system-x86_64: -device virtio-rng-device,bus=virtio-bus: Bus 'virtio-bus' not found
qbus_find_recursive() reports the "is full" error itself, and leaves
reporting "not found" to its caller. The result is confusion. Write
it a function contract that permits leaving all error reporting to the
caller, and implement it. Update callers to detect and report "is
full".
Screwed up when commit 1395af6 added the max_dev limit and the "is
full" error condition to enforce it.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
disas does not need to access the CPU env for any reason. Change the
APIs to accept CPU pointers instead. Small change pattern needs to be
applied to all target translate.c. This brings us closer to making
disas.o a common-obj and less architecture specific in general.
Cc: Richard Henderson <rth@twiddle.net>
Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: "Edgar E. Iglesias" <edgar.iglesias@gmail.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Eduardo Habkost <ehabkost@redhat.com>
Cc: Michael Walle <michael@walle.cc>
Cc: Aurelien Jarno <aurelien@aurel32.net>
Cc: Leon Alrae <leon.alrae@imgtec.com>
Cc: Jia Liu <proljc@gmail.com>
Cc: Alexander Graf <agraf@suse.de>
Cc: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Cc: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
Cc: Guan Xuetao <gxt@mprc.pku.edu.cn>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Acked-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
The monitor currently has one helper, mon_get_cpu() which will return
an env pointer. The target specific users of this API want an env, but
all the target agnostic users really just want the cpu pointer. These
users then need to use the target-specifically defined ENV_GET_CPU to
navigate back up to the CPU from the ENV. Split the API for the two
uses cases to remove all need for ENV_GET_CPU.
Reviewed-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Acked-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Since the "S" argument type is only used with the "?" flag,
the bug can't bite.
Signed-off-by: Bandan Das <bsd@redhat.com>
Acked-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
When a command fails due to incorrect syntax or input, suggest using
the "help" command to get more information about the command. This
is only applicable for HMP.
Signed-off-by: Bandan Das <bsd@redhat.com>
Acked-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
There's too much going on in monitor_parse_command().
Split up the arguments parsing bits into a separate function
monitor_parse_arguments(). Let the original function check for
command validity and sub-commands if any and return data (*cmd)
that the newly introduced function can process and return a
QDict. Also, pass a pointer to the cmdline to track current
parser location.
Suggested-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Bandan Das <bsd@redhat.com>
Acked-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
The preferred solution is to use tracepoints and there
is good chance of bitrot with the debug prints not being
enabled at compile time. Remove them.
Suggested-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Bandan Das <bsd@redhat.com>
Acked-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Now that qbool is fixed, let's fix getting and setting a bool
value to a qdict member to also use C99 bool rather than int.
I audited all callers to ensure that the changed return type
will not cause any changed semantics.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Acked-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
We require a C99 compiler, so let's use 'bool' instead of 'int'
when dealing with boolean values. There are few enough clients
to fix them all in one pass.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Acked-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
The action to potentially switch sp register is not occurring at the correct
point in the interrupt entry or exception exit sequences.
For the interrupt entry case the sp on entry is used to create the stack
exception frame - but this may well be the user stack pointer, since we
haven't done the switch yet. Re-order the flow to switch the sp regs then
use the current sp to create the exception frame.
For the return from exception case the code is unwinding the sp after
switching sp registers. But it should always unwind the supervisor sp
first, then carry out any required sp switch.
Note that these problems don't effect operation unless the user sp bit is
set in the CACR register. Only a single sp is used in the default power up
state. Previously Linux only used this single sp mode. But modern versions
of Linux use the user sp mode now, so we need correct behavior for Linux
to work.
Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Tested-by: Laurent Vivier <laurent@vivier.eu>
Message-id: 1434721406-25288-4-git-send-email-gerg@uclinux.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Fill out the code support for the move to/from usp instructions. They are
being decoded, but there is no code to support there actions. So add it.
Current versions of Linux running on the ColdFire 5208 use these instructions.
Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Tested-by: Laurent Vivier <laurent@vivier.eu>
Message-id: 1434721406-25288-3-git-send-email-gerg@uclinux.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Implement the SIMR and CIMR registers of the 5208 interrupt controller.
These are used by modern versions of Linux running on ColdFire (not sure
of the exact version they were introduced, but they have been in for quite
a while now).
Without this change when attempting to run a linux-3.5 kernel you will
see:
qemu: hardware error: mcf_intc_write: Bad write offset 28
and execution will stop and dump out.
Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Tested-by: Laurent Vivier <laurent@vivier.eu>
Message-id: 1434721406-25288-2-git-send-email-gerg@uclinux.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* Changes to name string ownership for alias properties
* Improvements around enum properties
* Cleanups around -object handling
* New helper functions
* Cleanups of qdev init helper functions
* Add path argument to qom-tree script
* QTest cleanup to use new qtest_add_data_func() consistently
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=bIg2
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/afaerber/tags/qom-devices-for-peter' into staging
QOM infrastructure fixes and device conversions
* Changes to name string ownership for alias properties
* Improvements around enum properties
* Cleanups around -object handling
* New helper functions
* Cleanups of qdev init helper functions
* Add path argument to qom-tree script
* QTest cleanup to use new qtest_add_data_func() consistently
# gpg: Signature made Fri Jun 19 18:14:38 2015 BST using RSA key ID 3E7E013F
# gpg: Good signature from "Andreas Färber <afaerber@suse.de>"
# gpg: aka "Andreas Färber <afaerber@suse.com>"
* remotes/afaerber/tags/qom-devices-for-peter:
qdev: Un-deprecate qdev_init_nofail()
qdev: Deprecated qdev_init() is finally unused, drop
qom: Don't pass string table to object_get_enum() function
qom: Add an object_property_add_enum() helper function
qom: Make enum string tables const-correct
qom: Add object_new_with_props() / object_new_withpropv() helpers
qom: Add helper function for getting user objects root
vl: Create (most) objects before creating chardev backends
doc: Document user creatable object types in help text
backends: Fix typename of 'policy' enum property in hostmem obj
scripts: Add support for path as argument of qom-tree
tests: Use qtest_add_data_func() consistently
qdev: Free property names after registering gpio aliases
qom: strdup() target property name on object_property_add_alias()
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* Avoid long 100% CPU wait after restarting guests that use the periodic timer
* Fixes for access clamping (WinXP, MIPS)
* wixl/.msi support for qemu-ga on Windows
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2
iQEcBAABCAAGBQJVg+9dAAoJEL/70l94x66Df/MH/jWRacMKQAGJwmlXS4NsTCdh
HF85290kWn+P9NH1e7TBnhPrgBdDTJmxK3fAMHKZwXs3vDs2lC1eBJyoGZw7lVxQ
uihlnQjSSaRd5R6IpXNgr0wFrS8T3pN+FzOkStYqEHYINa1uBa6CBXYzOzGTFgd+
OOrU0O15NAVsxU29jBW4HPqX4S0zT4KbpvIESGWPgGbLyBhgLAuMLlvbWwNkFZt0
3bDtel9QQnL0Sm4wl7IWCqePEIkCkbF4tRIwCn34Bq/SuE0RgESiHGKUJ638oSuj
/ga1StztyHZhnk+SSAcnma//Holauh+2nBm+8sGyyFFeUbEJsPG70ODCrfxbQf0=
=AXLV
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into staging
* i8254 security fix
* Avoid long 100% CPU wait after restarting guests that use the periodic timer
* Fixes for access clamping (WinXP, MIPS)
* wixl/.msi support for qemu-ga on Windows
# gpg: Signature made Fri Jun 19 11:30:53 2015 BST using RSA key ID 78C7AE83
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>"
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>"
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg: It is not certain that the signature belongs to the owner.
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1
# Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83
* remotes/bonzini/tags/for-upstream:
exec: clamp accesses against the MemoryRegionSection
exec: do not clamp accesses to MMIO regions
mc146818rtc: Reset the periodic timer on load
qemu-timer: Call clock reset notifiers on forward jumps
tests: virtio-scsi: Add test for unaligned WRITE SAME
tests: virtio-scsi: Move start/stop to individual test functions
libqos: Complete virtio device ID definition list
libqos: Allow calling guest_free on NULL pointer
tests: Link libqos virtio object to virtio-scsi-test
i8254: fix out-of-bounds memory access in pit_ioport_read()
qemu-ga: Building Windows MSI installation with configure/Makefile
qemu-ga: Introduce Windows MSI script
qemu-ga: debug printouts to help troubleshoot installation
qemu-ga: adding vss-[un]install options
qemu-log: Open file for logging when specified
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This code is already being run in the mb_cpu_realizefn()
function. As PVR registers are preserved on reset this
code is not required.
Signed-off-by: Alistair Francis <alistair.francis@xilinx.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Remove the hardcoded values from the machine specific reset
function, as the same values are already set in the standard
MicroBlaze reset.
This also allows the entire reset function to be deleted, as
PVR registers are now preserved on reset.
Signed-off-by: Alistair Francis <alistair.francis@xilinx.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Move the hard coded register values to the init function.
This also allows the entire reset function to be deleted, as
PVR registers are now preserved on reset.
The hardcoded PVR0 values can be removed as they are setting
the endianness and stack protection, which is already done
or invalid.
Signed-off-by: Alistair Francis <alistair.francis@xilinx.com>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Originally the pvr-full PVR bits were manually set for each machine. This
is a hassle and difficult to read, instead set them based on the CPU
properties.
Signed-off-by: Alistair Francis <alistair.francis@xilinx.com>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Originally the version_mask PVR bits were manually set for each
machine. This is a hassle and difficult to read, instead set them
based on the CPU properties.
Signed-off-by: Alistair Francis <alistair.francis@xilinx.com>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Originally the endi PVR bits were manually set for each machine. This
is a hassle and difficult to read, instead set them based on the CPU
properties.
Signed-off-by: Alistair Francis <alistair.francis@xilinx.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Originally the dcache-writeback PVR bits were manually set for each machine.
This is a hassle and difficult to read, instead set them based on the CPU
properties.
Signed-off-by: Alistair Francis <alistair.francis@xilinx.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Originally the use-mmu PVR bits were manually set for each machine. This
is a hassle and difficult to read, instead set them based on the CPU
properties.
Signed-off-by: Alistair Francis <alistair.francis@xilinx.com>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Rename the usefpu variable to use_fpu.
Signed-off-by: Alistair Francis <alistair.francis@xilinx.com>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Stack protection is not available when the MMU is enabled.
As the MMU is enabled by default, disable stack protection
by default.
Signed-off-by: Alistair Francis <alistair.francis@xilinx.com>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Originally the use-fpu PVR bits were manually set for each machine. This
is a hassle and difficult to read, instead set them based on the CPU
properties.
Signed-off-by: Alistair Francis <alistair.francis@xilinx.com>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Rename the "xlnx.base-vectors" string to "base-vectors" and
move the base_vectors variable into the cfg struct.
Signed-off-by: Alistair Francis <alistair.francis@xilinx.com>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Microblaze stack protection is configurable and isn't always enabled.
This patch allows the stack protection to be disabled from the
CPU properties.
Signed-off-by: Alistair Francis <alistair.francis@xilinx.com>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Move the Microblaze PVR registers to the end of the CPUMBState
and preserve them during reset. This is similar to what the
QEMU ARM model does with some of it's registers.
This allows the Microblaze PVR registers to only be set once
at realise instead of constantly at reset.
Signed-off-by: Alistair Francis <alistair.francis@xilinx.com>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Fix up the incorrect indentation level in the helper_stackprot() function.
Signed-off-by: Alistair Francis <alistair.francis@xilinx.com>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Instantiate and realise the CPU directly, rather than using
cpu_mb_init. Microblazes cpu_model argument is a dummy so remove the
default cpu_model set logic.
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Signed-off-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
It's a perfectly sensible helper function.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
