MSR_SMI_COUNT started being migrated in QEMU 2.12. Do not migrate it
on older machine types, or the subsection causes a load failure for
guests that use SMM.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Rename DCACHE to DATA_CACHE and ICACHE to INSTRUCTION_CACHE.
This avoids conflict with Linux asm/cachectl.h macros and fixes
build failure on mips hosts.
Reported-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <20180717194010.30096-1-ehabkost@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Acked-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Babu Moger <babu.moger@amd.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
To correctly handle small (less than TARGET_PAGE_SIZE) MPU regions,
we must correctly handle the case where the address being looked
up hits in an MPU region that is not small but the address is
in the same page as a small region. For instance if MPU region
1 covers an entire page from 0x2000 to 0x2400 and MPU region
2 is small and covers only 0x2200 to 0x2280, then for an access
to 0x2000 we must not return a result covering the full page
even though we hit the page-sized region 1. Otherwise we will
then cache that result in the TLB and accesses that should
hit region 2 will incorrectly find the region 1 information.
Check for the case where we miss an MPU region but it is still
within the same page, and in that case narrow the size we will
pass to tlb_set_page_with_attrs() for whatever the final
outcome is of the MPU lookup.
Reported-by: Adithya Baglody <adithya.nagaraj.baglody@intel.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20180716133302.25989-1-peter.maydell@linaro.org
Usually, when baselining two CPU models, whereby one of them has base
CPU features disabled (e.g. z14-base,msa=off), we fallback to an older
model that did not have these features in the base model. We always try to
create a "sane" CPU model (as far as possible), and one part of it is that
removing base features is no good and to be avoided.
Now, if we disable base features that were part of a z900, we're out of
luck. We won't find a CPU model and QEMU will segfault. This is a
scenario that should never happen in real life, but it can be used to
crash QEMU.
So let's properly report an error if we baseline e.g.:
{ "execute": "query-cpu-model-baseline",
"arguments" : { "modela": { "name": "z14-base", "props": {"esan3" : false}},
"modelb": { "name": "z14"}} }
Instead of segfaulting.
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20180718092330.19465-1-david@redhat.com>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
'I' was being double-incremented; correctly within the inner loop
and incorrectly within the outer loop.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Laurent Desnogues <laurent.desnogues@gmail.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20180711103957.3040-1-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Hyper-V identifies vCPUs by Virtual Processor (VP) index which can be
queried by the guest via HV_X64_MSR_VP_INDEX msr. It is defined by the
spec as a sequential number which can't exceed the maximum number of
vCPUs per VM.
It has to be owned by QEMU in order to preserve it across migration.
However, the initial implementation in KVM didn't allow to set this
msr, and KVM used its own notion of VP index. Fortunately, the way
vCPUs are created in QEMU/KVM makes it likely that the KVM value is
equal to QEMU cpu_index.
So choose cpu_index as the value for vp_index, and push that to KVM on
kernels that support setting the msr. On older ones that don't, query
the kernel value and assert that it's in sync with QEMU.
Besides, since handling errors from vCPU init at hotplug time is
impossible, disable vCPU hotplug.
This patch also introduces accessor functions to encapsulate the mapping
between a vCPU and its vp_index.
Signed-off-by: Roman Kagan <rkagan@virtuozzo.com>
Message-Id: <20180702134156.13404-3-rkagan@virtuozzo.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
In Hyper-V-related code, vCPUs are identified by their VP (virtual
processor) index. Since it's customary for "vcpu_id" in QEMU to mean
APIC id, rename the respective variables to "vp_index" to make the
distinction clear.
Signed-off-by: Roman Kagan <rkagan@virtuozzo.com>
Message-Id: <20180702134156.13404-2-rkagan@virtuozzo.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This patch adds field with content of KERNEL_GS_BASE MSR to QEMU note in
ELF dump.
On Windows, if all vCPUs are running usermode tasks at the time the dump is
created, this can be helpful in the discovery of guest system structures
during conversion ELF dump to MEMORY.DMP dump.
Signed-off-by: Viktor Prutyanov <viktor.prutyanov@virtuozzo.com>
Message-Id: <20180714123000.11326-1-viktor.prutyanov@virtuozzo.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
For M-profile exception returns, the mmu index to use for exception
return unstacking is supposed to be that of wherever we are returning to:
* if returning to handler mode, privileged
* if returning to thread mode, privileged or unprivileged depending on
CONTROL.nPRIV for the destination security state
We were passing the wrong thing as the 'priv' argument to
arm_v7m_mmu_idx_for_secstate_and_priv(). The effect was that guests
which programmed the MPU to behave differently for privileged and
unprivileged code could get spurious MemManage Unstack exceptions.
Reported-by: Adithya Baglody <adithya.nagaraj.baglody@intel.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20180709124535.1116-1-peter.maydell@linaro.org
The translator loop does not allow the tb_start hook to set
dc->base.is_jmp; the only hook allowed to do that is translate_insn.
Split the work between init_disas_context where we validate
the gUSA parameters, and translate_insn where we emit code.
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Use MAKE_64BIT_MASK instead of open-coding. Remove an odd
vector size check that is unlikely to be more profitable
than 3 64-bit integer stores. Correct the iteration for WORD
to avoid writing too much data.
Fixes RISU tests of PTRUE for VL 256.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20180705191929.30773-3-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
These instructions must perform the sve_access_check, but
since they are implemented as NOPs there is no generated
code to elide when the access check fails.
Fixes: Coverity issues 1393780 & 1393779.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
When I try to build a ppc64 target on a ppc64 host (gcc 8.1.1), I have:
.../target/ppc/int_helper.c: In function 'helper_vinsertb':
.../target/ppc/int_helper.c:1954:32: error: array subscript 18446744073709551608 is above array bounds of 'uint8_t[16]' {aka 'unsigned char[16]'} [-Werror=array-bounds]
memmove(&r->u8[index], &b->u8[8 - sizeof(r->element)], \
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
.../target/ppc/int_helper.c:1965:1: note: in expansion of macro 'VINSERT'
If we compare with the macro for ppc64le, we can see
sizeof(r->element[0]) should be used instead of sizeof(r->element).
And VINSERT uses only u8, u16, u32 and u64, so the maximum value
of sizeof(r->element[0]) is 8
Suggested-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Since commit d6dcc5583e, '-cpu ?' shows the description of the
X86_CPU_TYPE_NAME("max") for the host CPU model:
Enables all features supported by the accelerator in the current host
instead of the expected:
KVM processor with all supported host features
or
HVF processor with all supported host features
This is caused by the early use of kvm_enabled() and hvf_enabled() in
a class_init function. Since the accelerator isn't configured yet, both
helpers return false unconditionally.
A QEMU binary will only be compiled with one of these accelerators, not
both. The appropriate description can thus be decided at build time.
Signed-off-by: Greg Kurz <groug@kaod.org>
Message-Id: <153055056654.212317.4697363278304826913.stgit@bahia.lan>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Mostly patches from Richard Henderson fixing multiple things:
* Fix singlestepping in GDB.
* Use more TB linking.
* Fixes to exit TB after updating SPRs to enable registering of state
changes.
* Significant optimizations and refactors to the TLB
* Split out disassembly from translation.
* Add qemu-or1k to qemu-binfmt-conf.sh.
* Implement signal handling for linux-user.
Then there are a few fixups from me:
* Fix delay slot detections to match hardware, this was masking a bug
in the linus kernel.
* Fix stores to the PIC mask register
-----BEGIN PGP SIGNATURE-----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=mbu2
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/shorne/tags/pull-or-20180703' into staging
OpenRISC cleanups and Fixes for QEMU 3.0
Mostly patches from Richard Henderson fixing multiple things:
* Fix singlestepping in GDB.
* Use more TB linking.
* Fixes to exit TB after updating SPRs to enable registering of state
changes.
* Significant optimizations and refactors to the TLB
* Split out disassembly from translation.
* Add qemu-or1k to qemu-binfmt-conf.sh.
* Implement signal handling for linux-user.
Then there are a few fixups from me:
* Fix delay slot detections to match hardware, this was masking a bug
in the linus kernel.
* Fix stores to the PIC mask register
# gpg: Signature made Tue 03 Jul 2018 14:44:10 BST
# gpg: using RSA key C3B31C2D5E6627E4
# gpg: Good signature from "Stafford Horne <shorne@gmail.com>"
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: D9C4 7354 AEF8 6C10 3A25 EFF1 C3B3 1C2D 5E66 27E4
* remotes/shorne/tags/pull-or-20180703: (25 commits)
target/openrisc: Fix writes to interrupt mask register
target/openrisc: Fix delay slot exception flag to match spec
linux-user: Fix struct sigaltstack for openrisc
linux-user: Implement signals for openrisc
target/openrisc: Add support in scripts/qemu-binfmt-conf.sh
target/openrisc: Reorg tlb lookup
target/openrisc: Increase the TLB size
target/openrisc: Stub out handle_mmu_fault for softmmu
target/openrisc: Use identical sizes for ITLB and DTLB
target/openrisc: Fix cpu_mmu_index
target/openrisc: Fix tlb flushing in mtspr
target/openrisc: Reduce tlb to a single dimension
target/openrisc: Merge mmu_helper.c into mmu.c
target/openrisc: Remove indirect function calls for mmu
target/openrisc: Merge tlb allocation into CPUOpenRISCState
target/openrisc: Form the spr index from tcg
target/openrisc: Exit the TB after l.mtspr
target/openrisc: Split out is_user
target/openrisc: Link more translation blocks
target/openrisc: Fix singlestep_enabled
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Here's a last minue pull request before today's soft freeze. Ideally
I would have sent this earlier, but I was waiting for a couple of
extra fixes I knew were close. And the freeze crept up on me, like
always.
Most of the changes here are bugfixes in any case. There are some
cleanups as well, which have been in my staging tree for a little
while. There are a couple of truly new features (some extensions to
the sam460ex platform), but these are low risk, since they only affect
a new and not really stabilized machine type anyway.
Higlights are:
* Mac platform improvements from Mark Cave-Ayland
* Sam460ex improvements from BALATON Zoltan et al.
* XICS interrupt handler cleanups from Cédric Le Goater
* TCG improvements for atomic loads and stores from Richard
Henderson
* Assorted other bugfixes
-----BEGIN PGP SIGNATURE-----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=AHrx
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/dgibson/tags/ppc-for-3.0-20180703' into staging
ppc patch queue 2018-07-03
Here's a last minue pull request before today's soft freeze. Ideally
I would have sent this earlier, but I was waiting for a couple of
extra fixes I knew were close. And the freeze crept up on me, like
always.
Most of the changes here are bugfixes in any case. There are some
cleanups as well, which have been in my staging tree for a little
while. There are a couple of truly new features (some extensions to
the sam460ex platform), but these are low risk, since they only affect
a new and not really stabilized machine type anyway.
Higlights are:
* Mac platform improvements from Mark Cave-Ayland
* Sam460ex improvements from BALATON Zoltan et al.
* XICS interrupt handler cleanups from Cédric Le Goater
* TCG improvements for atomic loads and stores from Richard
Henderson
* Assorted other bugfixes
# gpg: Signature made Tue 03 Jul 2018 06:55:22 BST
# gpg: using RSA key 6C38CACA20D9B392
# gpg: Good signature from "David Gibson <david@gibson.dropbear.id.au>"
# gpg: aka "David Gibson (Red Hat) <dgibson@redhat.com>"
# gpg: aka "David Gibson (ozlabs.org) <dgibson@ozlabs.org>"
# gpg: aka "David Gibson (kernel.org) <dwg@kernel.org>"
# Primary key fingerprint: 75F4 6586 AE61 A66C C44E 87DC 6C38 CACA 20D9 B392
* remotes/dgibson/tags/ppc-for-3.0-20180703: (35 commits)
ppc: Include vga cirrus card into the compiling process
target/ppc: Relax reserved bitmask of indexed store instructions
target/ppc: set is_jmp on ppc_tr_breakpoint_check
spapr: compute default value of "hpt-max-page-size" later
target/ppc/kvm: don't pass cpu to kvm_get_smmu_info()
target/ppc/kvm: get rid of kvm_get_fallback_smmu_info()
ppc440_uc: Basic emulation of PPC440 DMA controller
sam460ex: Add RTC device
hw/timer: Add basic M41T80 emulation
ppc4xx_i2c: Rewrite to model hardware more closely
hw/ppc: Give sam46ex its own config option
fpu_helper.c: fix setting FPSCR[FI] bit
target/ppc: Implement the rest of gen_st_atomic
target/ppc: Implement the rest of gen_ld_atomic
target/ppc: Use atomic min/max helpers
target/ppc: Use MO_ALIGN for EXIWX and ECOWX
target/ppc: Split out gen_st_atomic
target/ppc: Split out gen_ld_atomic
target/ppc: Split out gen_load_locked
target/ppc: Tidy gen_conditional_store
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
# Conflicts:
# hw/ppc/spapr.c
The interrupt controller mask register (PICMR) allows writing any value
to any of the 32 interrupt mask bits. Writing a 0 masks the interrupt
writing a 1 unmasks (enables) the the interrupt.
For some reason the old code was or'ing the write values to the PICMR
meaning it was not possible to ever mask a interrupt once it was
enabled.
I have tested this by running linux 4.18 and my regular checks, I don't
see any issues.
Reported-by: Davidson Francis <davidsondfgl@gmail.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Stafford Horne <shorne@gmail.com>
The delay slot exception flag is only set on the SR register during
exception. Previously it was being set on both the ESR and SR this
caused QEMU to differ from the spec. The was apparent as the linux
kernel had a bug where it could boot on QEMU but not on real hardware.
The fixed logic now matches hardware.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Stafford Horne <shorne@gmail.com>
All of the existing code was boilerplate from elsewhere,
and would crash the guest upon the first signal.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Stafford Horne <shorne@gmail.com>
---
v2:
Add a comment to the new definition of target_pt_regs.
Install the signal mask into the ucontext.
v3:
Incorporate feedback from Laurent.
While openrisc has a split i/d tlb, qemu does not. Perform a
lookup on both i & d tlbs in parallel and put the composite
rights into qemu's tlb. This avoids ping-ponging the qemu tlb
between EXEC and READ.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Stafford Horne <shorne@gmail.com>
The PPC440 User Manual says that if bit 31 is set, the contents of
CR[CR0] are undefined for indexed store instructions but this form is
not invalid. Other PPC variants confirming to recent ISA where this
bit may be reserved should ignore reserved bits and not raise invalid
instruction exception. In particular, MorphOS has an stwx instruction
with bit 31 set and fails to boot currently because of this. With this
patch it gets further.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The use of GDB breakpoints was broken by b0c2d52 ("target/ppc: convert
to TranslatorOps", 2018-02-16).
Fix it by setting is_jmp, so that we break from the translation loop
as originally intended.
Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reported-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
In a future patch the machine code will need to retrieve the MMU
information from KVM during machine initialization before the CPUs
are created.
Actually, KVM_PPC_GET_SMMU_INFO is a VM class ioctl, and thus, we
don't need to have a CPU object around. We just need for KVM to
be initialized and use the kvm_state global. This patch just does
that.
Signed-off-by: Greg Kurz <groug@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Now that we're checking our MMU configuration is supported by KVM,
rather than adjusting it to KVM, it doesn't really make sense to
have a fallback for kvm_get_smmu_info(). If KVM is too old or buggy
to provide the details, we should rather treat this as an error.
This patch thus adds error reporting to kvm_get_smmu_info() and get
rid of the fallback code. QEMU will now terminate if KVM fails to
provide MMU details. This may break some very old setups, but the
simplification is worth the sacrifice.
Signed-off-by: Greg Kurz <groug@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The FPSCR[FI] bit indicates if the last floating point instruction had a result that was rounded. Each consecutive floating point instruction is suppose to set this bit to the correct value. What currently happens is this bit is not set as often as it should be. I have verified that this is the behavior of a real PowerPC 950. This patch fixes that problem by deciding to set this bit after each floating point instruction.
https://www.pdfdrive.net/powerpc-microprocessor-family-the-programming-environments-for-32-e3087633.html
Page 63 in table 2-4 is where the description of this bit can be found.
Signed-off-by: John Arbuckle <programmingkidx@gmail.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The store twin case was stubbed out. For now, implement it only within
a serial context, forcing parallel execution to synchronize. It would
be possible to implement with a cmpxchg loop, if we care, but the loose
alignment requirements (simply no crossing 32-byte boundary) might send
us back to the serial context anyway.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
These cases were stubbed out. For now, implement them only within
a serial context, forcing parallel execution to synchronize. It
would be possible to implement these with cmpxchg loops, if we care.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
These operations were previously unimplemented for ppc.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
This avoids the need for gen_check_align entirely.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Move the guts of ST_ATOMIC to a function. Use foo_tl for the operations
instead of foo_i32 or foo_i64 specifically. Use MO_ALIGN instead of an
explicit call to gen_check_align.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Move the guts of LD_ATOMIC to a function. Use foo_tl for the operations
instead of foo_i32 or foo_i64 specifically. Use MO_ALIGN instead of an
explicit call to gen_check_align.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Leave only the minimal amount of code within the LDAR macro,
moving the rest of the code into gen_load_locked. Use MO_ALIGN
and remove the explicit call to gen_check_align.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Leave only the minimal amount of code within the STCX macro,
moving the rest of the code into gen_conditional_store.
Remove the explicit call to gen_check_align; the matching LDAX will
have already checked alignment, and we verify the same address.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Always use the gen_conditional_store implementation that uses
atomic_cmpxchg. Make sure and clear reserve_addr across most
interrupts crossing the cpu_loop.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
When running in a parallel context, we must use a helper in order
to perform the 128-bit atomic operation. When running in a serial
context, do the compare before the store.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Section 1.4 of the Power ISA v3.0B states that this insn is
single-copy atomic. As we cannot (yet) issue 128-bit stores
within TCG, use the generic helpers provided.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Section 1.4 of the Power ISA v3.0B states that both of these
instructions are single-copy atomic. As we cannot (yet) issue
128-bit loads within TCG, use the generic helpers provided.
Since TCG cannot (yet) return a 128-bit value, add a slot within
CPUPPCState for returning the high half of a 128-bit return value.
This solution is preferred to the helper assigning to architectural
registers directly, as it avoids clobbering all TCG live values.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
This allows faults from MO_ALIGN to have the same effect
as from gen_check_align.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The architecture supports 128 TLB entries. There is no reason
not to provide all of them. In the process we need to fix a
bug that failed to parameterize the configuration register that
tells the operating system the number of entries.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Stafford Horne <shorne@gmail.com>
---
v2:
- Change VMState version.
This hook is only used by CONFIG_USER_ONLY.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Stafford Horne <shorne@gmail.com>
The sizes are already the same, however, we can improve things
if they are identical by design.
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Stafford Horne <shorne@gmail.com>
The code in cpu_mmu_index does not properly honor SR_DME.
This bug has workarounds elsewhere in that we flush the
tlb more often than necessary, on the state changes that
should be reflected in a change of mmu_index.
Fixing this means that we can respect the mmu_index that
is given to tlb_flush.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Stafford Horne <shorne@gmail.com>
The previous code was confused, avoiding the flush of the old entry
if the new entry is invalid. We need to flush the old page if the
old entry is valid and the new page if the new entry is valid.
This bug was masked by over-flushing elsewhere.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Stafford Horne <shorne@gmail.com>
While we had defines for *_WAYS, we didn't define more than 1.
Reduce the complexity by eliminating this unused dimension.
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Stafford Horne <shorne@gmail.com>
With tlb_fill in mmu.c, we can simplify things further.
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Stafford Horne <shorne@gmail.com>
There is no reason to use an indirect branch instead
of simply testing the SR bits that control mmu state.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Stafford Horne <shorne@gmail.com>
There is no reason to allocate this separately. This was probably
copied from target/mips which makes the same mistake.
While doing so, move tlb into the clear-on-reset range. While not
all of the TLB bits are guaranteed zero on reset, all of the valid
bits are cleared, and the rest of the bits are unspecified.
Therefore clearing the whole of the TLB is correct.
Reviewed-by: Stafford Horne <shorne@gmail.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Stafford Horne <shorne@gmail.com>
