Since commit 6e99c63 "net/socket: Drop net_socket_can_send" and friends,
net queues need to be explicitly flushed after qemu_can_send_packet()
returns false, because the netdev side will disable the polling of fd.
This fixes the case of "cont" after "stop" (or migration).
Signed-off-by: Fam Zheng <famz@redhat.com>
Message-id: 1436232067-29144-1-git-send-email-famz@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Drop the union and move the hubport creation into the !is_netdev case.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-id: 1432743412-15943-6-git-send-email-stefanha@redhat.com
Both is_netdev and !is_netdev paths already check that
net_client_init_func[opts->kind] is non-NULL so there is no need for the
if statement.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-id: 1432743412-15943-5-git-send-email-stefanha@redhat.com
When a -net type is used that was not compiled into the binary there
should be an error message.
Note the special case for -net none, which is a no-op.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-id: 1432743412-15943-4-git-send-email-stefanha@redhat.com
It's cumbersome to keep the whitelist up-to-date. New netdev backends
should most likely be allowed so a blacklist makes more sense than a
whitelist.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-id: 1432743412-15943-3-git-send-email-stefanha@redhat.com
Although hmp-commands.hx lists "netmap" as a valid host_net_add type,
the command rejects it because it's missing from the list.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 1432743412-15943-2-git-send-email-stefanha@redhat.com
In particular, don't include it into headers.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
The traditional QMP command handler interface
int qmp_FOO(Monitor *mon, const QDict *params, QObject **ret_data);
doesn't provide for returning an Error object. Instead, the handler
is expected to stash it in the monitor with qerror_report().
When we rebased QMP on top of QAPI, we didn't change this interface.
Instead, commit 776574d introduced "middle mode" as a temporary aid
for converting existing QMP commands to QAPI one by one. More than
three years later, we're still using it.
Middle mode has two effects:
* Instead of the native input marshallers
static void qmp_marshal_input_FOO(QDict *, QObject **, Error **)
it generates input marshallers conforming to the traditional QMP
command handler interface.
* It suppresses generation of code to register them with
qmp_register_command()
This permits giving them internal linkage.
As long as we need qmp-commands.hx, we can't use the registry behind
qmp_register_command(), so the latter has to stay for now.
The former has to go to get rid of qerror_report(). Changing all QMP
commands to fit the QAPI mold in one go was impractical back when we
started, but by now there are just a few stragglers left:
do_qmp_capabilities(), qmp_qom_set(), qmp_qom_get(), qmp_object_add(),
qmp_netdev_add(), do_device_add().
Switch middle mode to generate native input marshallers, and adapt the
stragglers. Simplifies both the monitor code and the stragglers.
Rename do_qmp_capabilities() to qmp_capabilities(), and
do_device_add() to qmp_device_add, because that's how QMP command
handlers are named today.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
These macros expand into error class enumeration constant, comma,
string. Unclean. Has been that way since commit 13f59ae.
The error class is always ERROR_CLASS_GENERIC_ERROR since the previous
commit.
Clean up as follows:
* Prepend every use of a QERR_ macro by ERROR_CLASS_GENERIC_ERROR, and
delete it from the QERR_ macro. No change after preprocessing.
* Rewrite error_set(ERROR_CLASS_GENERIC_ERROR, ...) into
error_setg(...). Again, no change after preprocessing.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
Error classes other than ERROR_CLASS_GENERIC_ERROR should not be used
in new code. Hiding them in QERR_ macros makes new uses hard to spot.
Fortunately, there's just one such macro left. Eliminate it with this
coccinelle semantic patch:
@@
expression EP, E;
@@
-error_set(EP, QERR_DEVICE_NOT_FOUND, E)
+error_set(EP, ERROR_CLASS_DEVICE_NOT_FOUND, "Device '%s' not found", E)
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
qerror_report_err() is a transitional interface to help with
converting existing monitor commands to QMP. It should not be used
elsewhere.
The only remaining user in qemu-option.c is qemu_opts_parse(). Is it
used in QMP context? If not, we can simply replace
qerror_report_err() by error_report_err().
The uses in qemu-img.c, qemu-io.c, qemu-nbd.c and under tests/ are
clearly not in QMP context.
The uses in vl.c aren't either, because the only QMP command handlers
there are qmp_query_status() and qmp_query_machines(), and they don't
call it.
Remaining uses:
* drive_def(): Command line -drive and such, HMP drive_add and pci_add
* hmp_chardev_add(): HMP chardev-add
* monitor_parse_command(): HMP core
* tmp_config_parse(): Command line -tpmdev
* net_host_device_add(): HMP host_net_add
* net_client_parse(): Command line -net and -netdev
* qemu_global_option(): Command line -global
* vnc_parse_func(): Command line -display, -vnc, default display, HMP
change, QMP change. Bummer.
* qemu_pci_hot_add_nic(): HMP pci_add
* usb_net_init(): Command line -usbdevice, HMP usb_add
Propagate errors through qemu_opts_parse(). Create a convenience
function qemu_opts_parse_noisily() that passes errors to
error_report_err(). Switch all non-QMP users outside tests to it.
That leaves vnc_parse_func(). Propagate errors through it. Since I'm
touching it anyway, rename it to vnc_parse().
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
Most notably this includes virtio cross-endian patches.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJVg+xdAAoJECgfDbjSjVRp6AAH/3ILznMtvJZjQ/WOjLEsL13M
+0cYEM1LI6LbLhqeruQVVcY9/hx61yHxZMoLkVg/I2po7F4HDNI2vo5Y7eGx+xN0
5rlcAw9/ZQ6SkCVmjN/VZfISW5mSqCaKH8gNzu8AigjsryJSj5iDXv1YJimwsF+5
cgCerhLIVvEkXmNj1ChwR+fz1IgFzJ8TRaZ0N2glxLyVjgKS57diqZF3Rbg2DdQl
BPbekbbtxesPgmKRvtarbhjx26TlnP1YShjhWA5r72gBNlqblLDycpaIGXr34b3a
sLIZjxzQtTEGcaGtkifMgazyK3rY3JmzOshD0onFOWY1r6Abxuj7eTZOEE6JQXk=
=tju/
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging
virtio, pci fixes, enhancements
Most notably this includes virtio cross-endian patches.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# gpg: Signature made Fri Jun 19 11:18:05 2015 BST using RSA key ID D28D5469
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>"
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>"
* remotes/mst/tags/for_upstream:
vhost: enable vhost without without MSI-X
pci: Don't register a specialized 'config_write' if default behavior is intended
hw/core: rebase sysbus_get_fw_dev_path() to g_strdup_printf()
vhost_net: re-enable when cross endian
vhost-net: tell tap backend about the vnet endianness
tap: fix non-linux build
tap: add VNET_LE/VNET_BE operations
vhost: set vring endianness for legacy virtio
virtio: introduce virtio_legacy_is_cross_endian()
linux-headers: sync vhost.h
vhost-user: part of virtio
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The linux tap and macvtap backends can be told to parse vnet headers
according to little or big endian. This is done through the TUNSETVNETLE
and TUNSETVNETBE ioctls.
This patch brings all the plumbing for QEMU to use these APIs.
Signed-off-by: Greg Kurz <gkurz@linux.vnet.ibm.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Retain the function value for now, to permit selective conversion of
its callers.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Acked-by: Kevin Wolf <kwolf@redhat.com>
When the argument is non-zero, qemu_opts_foreach() stops on callback
returning non-zero, and returns that value.
When the argument is zero, it doesn't stop, and returns the bit-wise
inclusive or of all the return values. Funky :)
The callers that pass zero could just as well pass one, because their
callbacks can't return anything but zero:
* qemu_add_globals()'s callback qdev_add_one_global()
* qemu_config_write()'s callback config_write_opts()
* main()'s callbacks default_driver_check(), drive_enable_snapshot(),
vnc_init_func()
Drop the parameter, and always stop.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Acked-by: Kevin Wolf <kwolf@redhat.com>
Currently QEMU dynamically generates mac address for the NIC which
doesn't specify the mac address. But when we hotplug a NIC without
specifying mac address, the mac address will increase for the same NIC
along with hotplug and hot-unplug, and at last it will overflow. And if
we codeplug one NIC with mac address e.g. "52:54:00:12:34:56", then
hotplug one NIC without specifying mac address and the mac address of
the hotplugged NIC is duplicate of "52:54:00:12:34:56".
This patch add a mac_table to record the usage status and free the mac
address when the NIC is unrealized.
Signed-off-by: Shannon Zhao <zhaoshenglong@huawei.com>
Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
When -net nic fails, it first reports a specific error, then a generic
one, like this:
$ qemu-system-x86_64 -net nic,netdev=nonexistent
qemu-system-x86_64: -net nic,netdev=nonexistent: netdev 'nonexistent' not found
qemu-system-x86_64: -net nic,netdev=nonexistent: Device 'nic' could not be initialized
Convert net_init_nic() to Error to get rid of the unwanted second
error message.
While there, tidy up an Overcapitalized Error Message.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 1431691143-1015-4-git-send-email-armbru@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Error reporting for netdev_add is broken: the net_client_init_fun[]
report the actual errors with (at best) error_report(), and their
caller net_client_init1() makes up a generic error on top.
For command line and HMP, this produces an mildly ugly error cascade.
In QMP, the actual errors go to stderr, and the generic error becomes
the command's error reply.
To fix this, we need to convert the net_client_init_fun[] to Error.
To permit fixing them one by one, add an Error ** parameter to the
net_client_init_fun[]. If the call fails without returning an Error,
make up the same generic Error as before. But if it returns one, use
that instead. Since none of them does so far, no functional change.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 1431691143-1015-3-git-send-email-armbru@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Type "hubport" is valid only with -netdev. Unfortunately, that's
detected late and the error message doesn't explain why:
$ qemu-system-i386 -net hubport,id=foo,hubid=0
qemu-system-i386: -net hubport,id=foo,hubid=0: Device 'hubport' could not be initialized
Improve the error message to "Parameter 'type' expects a net type".
Not fixed: -net hubport without the parameters required by -netdev
hubport still asks for those parameters:
$ qemu-system-i386 -net hubport
qemu-system-i386: -net hubport: Parameter 'hubid' is missing
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 1431691143-1015-2-git-send-email-armbru@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
We can use this in virtio-net code as well as new Rocker driver code, so
up-level this.
Signed-off-by: Scott Feldman <sfeldma@gmail.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 1426306173-24884-2-git-send-email-sfeldma@gmail.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Using net_host_check_device is unnecessary. qemu_del_net_client asserts
for the non-peer case that it can only process NIC type NetClientStates,
and that assertion is valid for the peered case as well, so move it and
use the same check in net_host_device_remove. host_net_remove_completion
is already checking the type.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Jason Wang <jasowang@redhat.com>
Message-id: 1419353600-30519-2-git-send-email-pbonzini@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
qemu_opt_set() is a wrapper around qemu_opt_set() that reports the
error with qerror_report_err().
Most of its users assume the function can't fail. Make them use
qemu_opt_set_err() with &error_abort, so that should the assumption
ever break, it'll break noisily.
Just two users remain, in util/qemu-config.c. Switch them to
qemu_opt_set_err() as well, then rename qemu_opt_set_err() to
qemu_opt_set().
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Return the Error object instead of reporting it with
qerror_report_err().
Change callers that assume the function can't fail to pass
&error_abort, so that should the assumption ever break, it'll break
noisily.
Turns out all callers outside its unit test assume that. We could
drop the Error ** argument, but that would make the interface less
regular, so don't.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Some are called do_info_SUBCOMMAND() (old ones, usually), some
hmp_info_SUBCOMMAND(), some SUBCOMMAND_info(), sometimes SUBCOMMAND
pointlessly differs in spelling.
Normalize to hmp_info_SUBCOMMAND(), where SUBCOMMAND is exactly the
subcommand name with '-' replaced by '_'.
Exceptions:
* sun4m_irq_info(), sun4m_pic_info() renamed to sun4m_hmp_info_irq(),
sun4m_hmp_info_pic().
* lm32_irq_info(), lm32_pic_info() renamed to lm32_hmp_info_irq(),
lm32_hmp_info_pic().
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Some are called do_COMMAND() (old ones, usually), some hmp_COMMAND(),
and sometimes COMMAND pointlessly differs in spelling.
Normalize to hmp_COMMAND(), where COMMAND is exactly the command name
with '-' replaced by '_'.
Exceptions:
* do_device_add() and client_migrate_info() *not* renamed to
hmp_device_add(), hmp_client_migrate_info(), because they're also
QMP handlers. They still need to be converted to QAPI.
* do_memory_dump(), do_physical_memory_dump(), do_ioport_read(),
do_ioport_write() renamed do hmp_* instead of hmp_x(), hmp_xp(),
hmp_i(), hmp_o(), because those names are too cryptic for my taste.
* do_info_help() renamed to hmp_info_help() instead of hmp_info(),
because it only covers help.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
qerror_report_err() is a transitional interface to help with
converting existing monitor commands to QMP. It should not be used
elsewhere. Replace by error_report_err() in HMP command handler
hmp_host_net_add() and initial startup helpers net_init_client(),
net_init_netdev(). Keep it in QMP command handler qmp_netdev_add().
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
We should del hub port when peer is deleted since it will not be reused
and will only be freed during exit.
Signed-off-by: Jason Wang <jasowang@redhat.com>
Message-id: 1422860798-17495-3-git-send-email-jasowang@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This completes all packets, ensuring that callbacks
will not run when VM is stopped.
Cc: qemu-stable@nongnu.org
Cc: Jason Wang <jasowang@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
For all NICs(except virtio-net) emulated by qemu,
Such as e1000, rtl8139, pcnet and ne2k_pci,
Qemu can still receive packets when VM is not running.
If this happened in *migration's* last PAUSE VM stage, but
before the end of the migration, the new receiving packets will possibly dirty
parts of RAM which has been cached in *iovec*(will be sent asynchronously) and
dirty parts of new RAM which will be missed.
This will lead serious network fault in VM.
To avoid this, we forbid receiving packets in generic net code when
VM is not running.
Bug reproduction steps:
(1) Start a VM which configured at least one NIC
(2) In VM, open several Terminal and do *Ping IP -i 0.1*
(3) Migrate the VM repeatedly between two Hosts
And the *PING* command in VM will very likely fail with message:
'Destination HOST Unreachable', the NIC in VM will stay unavailable unless you
run 'service network restart'
Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Reviewed-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The mmsghdr struct is only introduced in Linux 2.6.32; add a
configure check for it and disable L2TPV3 on hosts which are
too old to provide it, rather than simply failing to compile.
Reported-by: chenliang <chenliang88@huawei.com>
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 1404219488-11196-1-git-send-email-arei.gonglei@huawei.com
[PMM: cleaned up commit message and corrected kernel version number]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
It indicates the number of elements in ncs field and makes sense to have
int inside NICPeers. Also in parse_netdev we do not need to access
container and work with NICPeers only.
Signed-off-by: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This transport allows to connect a QEMU nic to a static Ethernet
over L2TPv3 tunnel. The transport supports all options present
in the Linux kernel implementation. It allows QEMU to connect
to any Linux host running kernel 3.3+, most routers and network
devices as well as other QEMU instances.
[Fixed up net_client_init1() switch statement to support -netdev
--Stefan]
Signed-off-by: Anton Ivanov <antivano@cisco.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The supplied chardev id will be inspected for supported options. Only
a socket backend, with a set path (i.e. a Unix socket) and optionally
the server parameter set, will be allowed. Other options (nowait, telnet)
will make the chardev unusable and the netdev will not be initialised.
Additional checks for validity:
- requires `-numa node,memdev=..`
- requires `-device virtio-net-*`
The `vhostforce` option is used to force vhost-net when we deal with
non-MSIX guests.
Signed-off-by: Antonios Motakis <a.motakis@virtualopensystems.com>
Signed-off-by: Nikolay Nikolaev <n.nikolaev@virtualopensystems.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Luiz Capitulino <lcapitulino@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Make it possible to query all net clients without specifying an ID when calling
qemu_find_net_clients_except().
This also adds the add_completion_option() function which is to be used for
other commands completions as well.
Signed-off-by: Hani Benhabiles <hani@linux.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Using error_is_set(errp) that way can sweep programming errors under
the carpet when we get called incorrectly with an error set.
qmp_query_rx_filter() breaks its loop when it detects an error. It
needs to set another error when the loop completes normally.
Return right away instead of merely breaking the loop.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
With a client name, the QMP command is specified to return a list of
one element. This isn't locally obvious in the code. Make it so.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Also convert nearby monitor_printf() call to error_report().
Signed-off-by: Hani Benhabiles <hani@linux.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
The virtio_net offload APIs are used on the NIC's peer (i.e. the tap
device). The API was defined to implicitly use nc->peer, saving the
caller the trouble.
This wasn't ideal because:
1. There are callers who have the peer but not the NIC. Currently they
are forced to bypass the API and access peer->info->... directly.
2. The rest of the net.h API uses nc, not nc->peer, so it is
inconsistent.
This patch pushes nc->peer back up to callers.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Some new callbacks have been added to generalize the operations done
by virtio-net and vmxnet3 frontends to manipulate TAP offloadings.
Signed-off-by: Vincenzo Maffione <v.maffione@gmail.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
error_is_set(&var) is the same as var != NULL, but it takes
whole-program analysis to figure that out. Unnecessarily hard for
optimizers, static checkers, and human readers. Dumb it down to
obvious.
Gets rid of several dozen Coverity false positives.
Note that the obvious form is already used in many places.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
assign_name() in net/net.c is using snprintf + g_strdup to get the same
result as g_strdup_printf.
Signed-off-by: Hani Benhabiles <kroosec@gmail.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This improves readability and simplifies the code.
Cc: Anthony Liguori <aliguori@amazon.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
When a link change occurs on a backend (like tap), we currently do
not propage such change to the nic. As a result, when someone turns
off a link on a tap device, for instance, then a guest doesn't see
that change and continues to try to send traffic or run DHCP even
though the lower-layer is disconnected. This is OK when the network
is set up as a HUB since the the guest may be connected to other HUB
ports too, but when it's set up as a netdev, it makes thinkgs worse.
The patch addresses this by setting the peers link down only when the
peer is not a HUBPORT device. With this patch, in the following config
-netdev tap,id=net0 -device e1000,mac=XXXXX,netdev=net0
when net0 link is turned off, the guest e1000 shows lower-layer link
down. This allows guests to boot much faster in such configurations.
With windows guest, it also allows the network to recover properly
since windows will not configure the link-local IPv4 address, and
when the link is turned on, the proper address address is configured.
Signed-off-by: Vlad Yasevich <vyasevic@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This patch adds support for a network backend based on netmap.
netmap is a framework for high speed packet I/O. You can use it
to build extremely fast traffic generators, monitors, software
switches or network middleboxes. Its companion software switch
VALE lets you interconnect virtual machines.
netmap and VALE are implemented as a non-intrusive kernel module,
support NICs from multiple vendors, are part of standard FreeBSD
distributions and available in source format for Linux too.
To compile QEMU with netmap support, use the following configure
options:
./configure [...] --enable-netmap --extra-cflags=-I/path/to/netmap/sys
where "/path/to/netmap" contains the netmap source code, available at
http://info.iet.unipi.it/~luigi/netmap/
The same webpage contains more information about the netmap project
(together with papers and presentations).
Signed-off-by: Vincenzo Maffione <v.maffione@gmail.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Do not return after net_hub_flush(). Always flush callee network client
incoming queue.
Signed-off-by: Sergey Fedorov <s.fedorov@samsung.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
[Assigning a multicast MAC address to a NIC leads to confusing behavior.
Reject multicast MAC addresses so users are alerted to their error
straight away.
The "net/eth.h" in6_addr rename prevents a name collision with
<netinet/in.h> on Linux.
-- Stefan]
Signed-off-by: Dmitry V. Krivenok <krivenok.dmitry@gmail.com>
Reviewed-by: Amos Kong <kongjianjun@gmail.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Fam Zheng
Stefan Hajnoczi
Markus Armbruster
Peter Maydell
Greg Kurz
Shannon Zhao
Scott Feldman
Paolo Bonzini
Jason Wang
Michael S. Tsirkin
zhanghailiang
Gonglei
Jiri Pirko
Anton Ivanov
Nikolay Nikolaev
Hani Benhabiles
Igor Ryzhov
Vincenzo Maffione
Stefan Weil
Vlad Yasevich
Sergey Fedorov
Dmitry Krivenok