Combine output volume with Master and PCM registers values.
Use default values in mixer_reset ().
Set volume on post-load to update backend values.
v4,v5:
- fix some code style
Signed-off-by: Marc-Andr? Lureau <marcandre.lureau@redhat.com>
Signed-off-by: malc <av1474@comtv.ru>
It's a case by case (see Table 66. AC ?97 Baseline Audio Register Map)
Signed-off-by: Marc-Andr? Lureau <marcandre.lureau@redhat.com>
Signed-off-by: malc <av1474@comtv.ru>
That code doesn't compile. The interesting bits for volume control are
going to be rewritten in the following patch.
Signed-off-by: Marc-Andr? Lureau <marcandre.lureau@redhat.com>
Signed-off-by: malc <av1474@comtv.ru>
If the audio backend is capable of volume control, don't apply
software volume (mixeng_volume ()), but instead, rely on backend
volume control. This will allow guest to have full range volume
control.
Signed-off-by: Marc-Andr? Lureau <marcandre.lureau@redhat.com>
Signed-off-by: malc <av1474@comtv.ru>
Add a new PCM control operation to update the stream volume on the
audio backend. The argument given is a SWVoiceOut/SWVoiceIn.
v4:
- verified other backends didn't fail/assert on this new control
they randomly return 0 or -1, but we ignore return value.
Signed-off-by: Marc-Andr? Lureau <marcandre.lureau@redhat.com>
Signed-off-by: malc <av1474@comtv.ru>
Update roms/seabios and pc-bios/bios.bin to the 1.7.0 release.
Most noticable new feature is virtio-scsi support.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Not sure what the purpose of the assert() was, in any case it is bogous.
We can arrive there if transfer descriptors passed to us from the guest
failed to pass sanity checks, i.e. it is guest-triggerable. We deal
with that case by resetting the host controller. Everything is ok, no
need to throw a core dump here.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Also cleanup (reset) our device state when we reject a device due to a
speed mismatch.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The sofv value only ever gets a value assigned and is never used (read)
anywhere, so we can just drop it.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
This patch carries a complete rewrite of the usb descriptor parser.
Changes / improvements:
* We are using the USBDescriptor struct instead of hard-coded offsets
now to access descriptor data.
* (debug) printfs are all gone, tracepoints have been added instead.
* We don't try (and fail) to skip over unneeded descriptors. We parse
them all one by one. We keep track of which configuration, interface
and altsetting we are looking at and use this information to figure
which desciptors are in use and which we can ignore.
* On parse errors we clear all endpoint information, which will
disallow any communication with the device, except control endpoint
messages. This makes sure we don't end up with a silly device state
where half of the endpoints got enabled and the other half was left
disabled.
* Some sanity checks have been added.
The new parser is more robust and also leaves complete device
information in the trace log if you enable the ush_host_parse_*
tracepoints.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
This patch adds a new type for the binary representation of usb
descriptors. It is put into use for the descriptor generator code
where the struct replaces the hard-coded offsets.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
frindex always is a 14 bits counter, and not a 13 bits one as we were
emulating. There are some subtle hints to this in the spec, first of all
"Table 2-12. FRINDEX - Frame Index Register" says:
"Bit 13:0 Frame Index. The value in this register increments at the end of
each time frame (e.g. micro-frame). Bits [N:3] are used for the Frame List
current index. This means that each location of the frame list is accessed
8 times (frames or micro-frames) before moving to the next index. The
following illustrates values of N based on the value of the Frame List
Size field in the USBCMD register.
USBCMD[Frame List Size] Number Elements N
00b 1024 12
01b 512 11
10b 256 10
11b Reserved"
Notice how the text talks about "Bits [N:3]" are used ..., it does
NOT say that when N == 12 (our case) the counter will wrap from 8191 to 0,
or in otherwords that it is a 13 bits counter (bits 0 - 12).
The other hint is in "Table 2-10. USBSTS USB Status Register Bit Definitions":
"Bit 3 Frame List Rollover - R/WC. The Host Controller sets this bit to a one
when the Frame List Index (see Section 2.3.4) rolls over from its maximum value
to zero. The exact value at which the rollover occurs depends on the frame
list size. For example, if the frame list size (as programmed in the Frame
List Size field of the USBCMD register) is 1024, the Frame Index Register
rolls over every time FRINDEX[13] toggles. Similarly, if the size is 512,
the Host Controller sets this bit to a one every time FRINDEX[12] toggles."
Notice how this text talks about setting bit 3 when bit 13 of frindex toggles
(when there are 1024 entries, so our case), so this indicates that frindex
has a bit 13 making it a 14 bit counter.
Besides these clear hints the real proof is in the pudding. Before this
patch I could not stream data from a USB2 webcam under Windows XP, after
this cam using a USB2 webcam under Windows XP works fine, and no regressions
with other operating systems were seen.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Looks like a cut+paste bug from ehci_detach. When the device itself is
detached from a ehci port (ehci_detach op) we have to clear the
device pointer for the companion port too. When a device gets removed
from a downstream port of a usb hub (ehci_child_detach op) the ehci port
where the usb hub is plugged in is not affected.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
usb_packet_set_state can be called with p->ep = NULL. The tracepoint
there tries to log endpoint information, which leads to a segfault.
This patch makes usb_packet_set_state handle the NULL pointer properly.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Add pointer to USBPacket to all tracepoints tracking requests to make it
easier to identify them when multiple requests are in flight.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
When passing through a usb pendrive seabios will present it in the F12
boot menu and will happily boot from it.
This patch adds bootorder support so you can even make it the default
boot device.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
When we queue up usb packets we may happen to find a already queued
packet, which also might be finished at that point already. We don't
want continue processing the packet at this point though, so lets
just signal back we've found a in-flight packet when in queuing mode.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Not only QHs can form rings, but TDs too. With the new
queuing/pipelining support we are following TD chains and
can actually walk in circles. An assert() prevents us from
entering an endless loop then.
Fix is easy: Just stop queuing when we figure the TD we are
about to queue up is in flight already.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
... to make vmstate id string truely unique with multiple host
controllers, i.e. move from "1/usb-ptr" to "0000:00:01.3/1/usb-ptr"
(usb tabled connected to piix3 uhci).
This obviously breaks migration. To handle this the usb bus
property "full-path" is added. When setting this to false old
behavior is maintained. This way current qemu will be compatible
with old versions when started using '-M pc-$oldversion'.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Basically, the main wait loop calls qemu_run_all_timers() unconditionally. The
first thing this routine used to do is to see if a timer had been serviced,
and then reset the loop timeout to the next deadline.
However, the new deadlines had not been calculated at that point, as
qemu_run_timers() had not been called yet for each of the clocks. So
qemu_rearm_alarm_timer() would end up with a negative or zero deadline, and
default to setting a 250us timeout for the loop.
As qemu_run_timers() is called for each clock, the real deadlines would be put
in place, but because a loop timeout was already set, the loop timeout would
not be changed.
Once that 250us timeout fired, the real deadline would be used for the
subsequent timeout.
For idle VMs, this effectively doubles the number of times through the loop,
doubling the number of select() system calls, timer calls, etc. putting added
scheduling pressure on the kernel. And under cgroups, this really causes a big
problem because the cgroup code does not scale well.
By simply running the timers before trying to rearm the timer, we always rearm
with a non-zero deadline, effectively halving the number of system calls.
Signed-off-by: Peter Portante <pportant@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
* kiszka/queues/pending:
vapic: Disable for pre-1.1 machines
Kick io-thread on qemu_chr_accept_input
pcnet: Properly handle TX requests during Link Fail
pcnet: Clear ERR in CSR0 on stop
signrom: Rewrite as python script
Conflicts:
hw/pc_piix.c
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
* sstabellini/for_anthony:
xen: introduce an event channel for buffered io event notifications
xen-mapcache: don't unmap locked entry during mapcache invalidation
Xen, mapcache: Fix the compute of the size of bucket.
xen: handle backend deletion from xenstore
Xen: Add xen-apic support and hook it up.
Xen: basic HVM MSI injection support.
Once a chr frontend is able to receive input again, we need to inform
the io-thread about this fact. Otherwise, main_loop_wait may continue to
select without the related backend file descriptor in its set. This can
cause high input latencies if only low-rate events arrive otherwise.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
As long as we have no link and we aren't in internal loopback mode, no
packet must be sent. Instead, LCAR needs to be set in any active TX
descriptor and also CERR in CSR0.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
pcnet_stop already clears any reason (BABL, CERR, MISS, MERR) why ERR
(bit 15) should be set in CRS0. So we have to clear that bit as well.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Now that we have a hard dependency on python anyway, we can replace the
slow shell script to calculate the option ROM checksum with a fast AND
portable python version. Tested both with python 2.7 and 3.1.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
* 'w64' of git://qemu.weilnetz.de/qemu:
w64: Fix time conversion for some versions of MinGW-w64
nbd: Fix compiler warning (w64)
disas: Replace 'unsigned long' by 'uintptr_t'
cpu-exec: Remove non-portable type cast and fix format string
target-mips: Fix type cast for w64 (uintptr_t)
w64: Fix type cast in os_host_main_loop_wait
w64: Fix data types in softmmu*.h
w64: Use uintptr_t in exec.c
softmmu: Use uintptr_t for physaddr and rename it
w64: Fix struct CPUTLBEntry
w64: Fix definition of setjmp
w32: Move defines for socket specific errors to qemu-os-win32.h
w64: Use larger alignment for section with generated code
w64: Fix data types in cpu-all.h, exec.c
w64: Fix type casts used in some macros in cpu-all.h
tcg/i386: Add support for w64 ABI
tcg/i386: Use GDB JIT debugging interface only for hosts with ELF
tb.time is a time value, but not necessarily of the same size as time_t:
while time_t is 64 bit for w64, tb.time still is 32 bit only.
Therefore we need en explicit conversion.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Casting a pointer to an integer must use (DWORD_PTR) instead of (DWORD).
This also matches the definition of 'fd' (gint for w32, gint64 for w64).
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Replace all type casts to 'long' or 'unsigned long' by 'intptr_t' or 'uintptr_t'.
For type casts which are only used to extract the lower bits of an address
or to modify those bits, signedness does not matter. There I always use 'uintptr_t'.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Variable physaddr is a host address which should be represented by
data type 'uintptr_t'.
This is needed for w64 and changes nothing for other hosts.
v2:
Rename physaddr -> hostaddr (suggested by Blue Swirl).
Signed-off-by: Stefan Weil <sw@weilnetz.de>
For w64, some entries need 'uintptr_t' instead of 'unsigned long'.
For other host systems, both data types are identical, so nothing changes.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
The default definition of setjmp which is implemented in MinGW-w64
cannot be used with programs like QEMU which call longjmp from
code without structured exception handling (SEH).
This code therefore disables stack unwinding.
We could also implement SEH for QEMU's generated JIT code, but
that is much more difficult. Stack unwinding would also cost
execution time.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
