Commit Graph

113 Commits

Author SHA1 Message Date
Yuval Shaia 893dcdbfa9 slirp, disas: Replace min/max with MIN/MAX macros
Signed-off-by: Yuval Shaia <yuval.shaia@oracle.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
2016-12-20 23:55:19 +01:00
Daniel P. Berrange 6ab3fc32ea hw: replace most use of qemu_chr_fe_write with qemu_chr_fe_write_all
The qemu_chr_fe_write method will return -1 on EAGAIN if the
chardev backend write would block. Almost no callers of the
qemu_chr_fe_write() method check the return value, instead
blindly assuming data was successfully sent. In most cases
this will lead to silent data loss on interactive consoles,
but in some cases (eg RNG EGD) it'll just cause corruption
of the protocol being spoken.

We unfortunately can't fix the virtio-console code, due to
a bug in the Linux guest drivers, which would cause the
entire Linux kernel to hang if we delay processing of the
incoming data in any way. Fixing this requires first fixing
the guest driver to not hold spinlocks while writing to the
hvc device backend.

Fixes bug: https://bugs.launchpad.net/qemu/+bug/1586756

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-Id: <1473170165-540-4-git-send-email-berrange@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-09-13 19:09:42 +02:00
Thomas Huth 1f8b56e7ce slirp: Rename "struct arphdr" to "struct slirp_arphdr"
struct arphdr is already used by the system headers on OpenBSD
and thus QEMU does not compile here anymore. Fix it by renaming
our struct to slirp_arphdr instead.

Reported-by: Brad Smith
Reviewed-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-id: 1471249494-17392-1-git-send-email-thuth@redhat.com
Buglink: https://bugs.launchpad.net/qemu/+bug/1613133
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-08-16 12:17:36 +01:00
Markus Armbruster df3c286c53 error: Strip trailing '\n' from error string arguments (again)
Commit 9af9e0f, 6daf194d, be62a2eb and 312fd5f got rid of a bunch, but
they keep coming back.  checkpatch.pl tries to flag them since commit
5d596c2, but it's not very good at it.  Offenders tracked down with
Coccinelle script scripts/coccinelle/err-bad-newline.cocci, an updated
version of the script from commit 312fd5f.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <1470224274-31522-2-git-send-email-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
2016-08-08 09:00:44 +02:00
Samuel Thibault ef763fa4bd slirp: Support link-local DNS addresses
They look like fe80::%eth0

Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>

---
Changes since last submission:
- fix windows build
2016-07-03 23:29:13 +02:00
Samuel Thibault 1d17654e76 slirp: Add dns6 resolution
This makes get_dns_addr address family-agnostic, thus allowing to add the
IPv6 case.

Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
2016-07-03 23:27:08 +02:00
Samuel Thibault 972487b878 slirp: Split get_dns_addr
Separate get_dns_addr into get_dns_addr_cached and get_dns_addr_resolv_conf
to make conversion to IPv6 easier.

Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
2016-07-03 23:24:54 +02:00
Steven Luo bfb1ac1402 slirp: avoid use-after-free in slirp_pollfds_poll() if soread() returns an error
Samuel Thibault pointed out that it's possible that slirp_pollfds_poll()
will try to use a socket even after soread() returns an error, resulting
in an use-after-free if the socket was removed while handling the error.
Avoid this by refusing to continue to work with the socket in this case.

Signed-off-by: Steven Luo <steven+qemu@steven676.net>
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
2016-04-07 10:27:42 +02:00
Samuel Thibault 0b11c03662 slirp: Allow disabling IPv4 or IPv6
Add ipv4 and ipv6 boolean options, so the user can setup IPv4-only and
IPv6-only network environments.

Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
2016-04-01 17:51:55 +02:00
Thomas Huth eaf136f9a2 slirp: Fix migration from older versions of QEMU to the current one
While adding the IPv6 support, the commit eae303ff23
("slirp: Make Socket structure IPv6 compatible") changed the format of
the migration stream, without taking into account that we might still
receive an old migration stream layout when upgrading from QEMU version
2.5 (or older) to QEMU 2.6. Currently, QEMU bails out when doing a
migration from QEMU 2.5 to the recent master version when it has
been started with a "-net user,guestfwd=..." network. So let's fix
this by checking the version ID of the migration stream and by using
the old behavior if we've detected version 3 or less.

Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
2016-04-01 00:05:06 +02:00
Veronia Bahaa f348b6d1a5 util: move declarations out of qemu-common.h
Move declarations out of qemu-common.h for functions declared in
utils/ files: e.g. include/qemu/path.h for utils/path.c.
Move inline functions out of qemu-common.h and into new files (e.g.
include/qemu/bcd.h)

Signed-off-by: Veronia Bahaa <veroniabahaa@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-03-22 22:20:17 +01:00
Yann Bordenave 7aac531ef2 qapi-schema, qemu-options & slirp: Adding Qemu options for IPv6 addresses
This patch adds parameters to manage some new options in the qemu -net
command.
Slirp IPv6 address, network prefix, and DNS IPv6 address can be given in
argument to the qemu command.
Defaults parameters are respectively fec0::2, fec0::, /64 and fec0::3.

Signed-off-by: Yann Bordenave <meow@meowstars.org>
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
2016-03-15 10:35:25 +01:00
Guillaume Subiron 05061d8548 slirp: Adding IPv6 address for DNS relay
This patch adds an IPv6 address to the DNS relay. in6_equal_dns() is
developed using this Slirp attribute.
sotranslate_in/out/accept() are also updated to manage the IPv6 case so the
guest can be able to join the host using one of the Slirp addresses.

For now this only points to localhost. Further development will be needed to
automatically fetch the IPv6 address from resolv.conf, and announce this via
RDNSS.

Signed-off-by: Guillaume Subiron <maethor@subiron.org>
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
2016-03-15 10:35:22 +01:00
Guillaume Subiron 9dfbf250d2 slirp: Generalizing and neutralizing various TCP functions before adding IPv6 stuff
Basically, this patch adds some switch in various TCP functions to
prepare them for the IPv6 case.

To have something to "switch" in tcp_input() and tcp_respond(), a new
argument is used to give them the sa_family of the addresses they are
working on.

This patch does not include the entailed reindentation, to make proofread
easier. Reindentation is adressed in the following no-op patch.

Signed-off-by: Guillaume Subiron <maethor@subiron.org>
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
2016-03-15 10:35:14 +01:00
Guillaume Subiron 98c63057d2 slirp: Factorizing tcpiphdr structure with an union
This patch factorizes the tcpiphdr structure to put the IPv4 fields in
an union, for addition of version 6 in further patch.
Using some macros, retrocompatibility of the existing code is assured.

This patch also fixes the SLIRP_MSIZE and margin computation in various
functions, and makes them compatible with the new tcpiphdr structure,
whose size will be bigger than sizeof(struct tcphdr) + sizeof(struct ip)

Signed-off-by: Guillaume Subiron <maethor@subiron.org>
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
2016-03-15 10:35:11 +01:00
Guillaume Subiron 0d6ff71ae3 slirp: Adding IPv6, ICMPv6 Echo and NDP autoconfiguration
This patch adds the functions needed to handle IPv6 packets. ICMPv6 and
NDP headers are implemented.

Slirp is now able to send NDP Router or Neighbor Advertisement when it
receives Router or Neighbor Solicitation. Using a 64bit-sized IPv6
prefix, the guest is now able to perform stateless autoconfiguration
(SLAAC) and to compute its IPv6 address.

This patch adds an ndp_table, mainly inspired by arp_table, to keep an
NDP cache and manage network address resolution.
Slirp regularly sends NDP Neighbor Advertisement, as recommended by the
RFC, to make the guest refresh its route.

This also adds ip6_cksum() to compute ICMPv6 checksums using IPv6
pseudo-header.

Some #define ETH_* are moved upper in slirp.h to make them accessible to
other slirp/*.h

Signed-off-by: Guillaume Subiron <maethor@subiron.org>
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
2016-03-15 10:35:00 +01:00
Peter Maydell 7df7482bf6 slirp: Clean up includes
Clean up includes so that osdep.h is included first and headers
which it implies are not included manually.

This commit was created with scripts/clean-includes.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1454089805-5470-10-git-send-email-peter.maydell@linaro.org
2016-02-04 17:41:30 +00:00
Guillaume Subiron eae303ff23 slirp: Make Socket structure IPv6 compatible
This patch replaces foreign and local address/port couples in Socket
structure by 2 sockaddr_storage which can be casted in sockaddr_in.
Direct access to address and port is still possible thanks to some
\#define, so retrocompatibility of the existing code is assured.

The ss_family field of sockaddr_storage is declared after each socket
creation.

The whole structure is also saved/restored when a Qemu session is
saved/restored.

This prepares for IPv6 support.

Signed-off-by: Guillaume Subiron <maethor@subiron.org>
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
2016-02-04 13:22:06 +08:00
Guillaume Subiron 18137fba35 slirp: Adding address family switch for produced frames
In if_encap, a switch is added to prepare for the IPv6 case. Some code
is factorized.

This prepares for IPv6 support.

Signed-off-by: Guillaume Subiron <maethor@subiron.org>
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
2016-02-04 13:22:06 +08:00
Guillaume Subiron fc3779a118 slirp: Generalizing and neutralizing ARP code
Basically, this patch replaces "arp" by "resolution" every time "arp"
means "mac resolution" and not specifically ARP.

This prepares for IPv6 support.

Signed-off-by: Guillaume Subiron <maethor@subiron.org>
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
2016-02-04 13:22:06 +08:00
Peter Maydell 49bba868df slirp: Remove unused zero_ethaddr[] variable
The zero_ethaddr[] array is never used; delete it.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2014-06-10 19:39:34 +04:00
Samuel Thibault 959e41473f slirp/arp: do not special-case bogus IP addresses
Do not special-case addresses with zero host part, as we do not
necessarily know how big it is, and the guest can fake them anyway.
Silently avoid having 0.0.0.0 as a destination, however.

Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
[Edgar: Minor change to subject]
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
2014-06-09 01:49:28 +02:00
Cole Robinson 02d1608980 slirp: Remove default_mon usage
These errors don't seem user initiated, so forcibly printing to the
monitor doesn't seem right. Just use error_report.

Drop lprint since it's now unused.

Cc: Jan Kiszka <jan.kiszka@siemens.com>

Signed-off-by: Cole Robinson <crobinso@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2014-04-25 09:19:58 -04:00
Jan Kiszka 426e3e6ce1 slirp: clean up slirp_update_timeout
No need to write out the timeout early, keep it local until we are done.

Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
2013-09-17 12:26:05 +02:00
Liu Ping Fan a42e9c4188 slirp: set mainloop timeout with more precise value
If slirp needs to emulate tcp timeout, then the timeout value
for mainloop should be more precise, which is determined by
slirp's fasttimo or slowtimo. Achieve this by swap the logic
sequence of slirp_pollfds_fill and slirp_update_timeout.

Signed-off-by: Liu Ping Fan <pingfank@linux.vnet.ibm.com>
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
2013-09-17 12:26:05 +02:00
Liu Ping Fan 9b0ca6cc64 slirp: define timeout as macro
Signed-off-by: Liu Ping Fan <pingfank@linux.vnet.ibm.com>
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
2013-09-17 12:26:04 +02:00
Liu Ping Fan fe0ff43c9d slirp: make timeout local
Each slirp has its own time to caculate timeout.

Signed-off-by: Liu Ping Fan <pingfank@linux.vnet.ibm.com>
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
2013-09-17 12:26:04 +02:00
Alex Bligh bc72ad6754 aio / timers: Switch entire codebase to the new timer API
This is an autogenerated patch using scripts/switch-timer-api.

Switch the entire code base to using the new timer API.

Note this patch may introduce some line length issues.

Signed-off-by: Alex Bligh <alex@alex.org.uk>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-08-22 19:14:24 +02:00
Paolo Bonzini dccfcd0e5f sysemu: avoid proliferation of include/ subdirectories
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-04-15 18:19:25 +02:00
Stefan Hajnoczi 8917c3bdba slirp: switch to GPollFD
Slirp uses rfds/wfds/xfds more extensively than other QEMU components.

The rarely-used out-of-band TCP data feature is used.  That means we
need the full table of select(2) to g_poll(3) events:

  rfds -> G_IO_IN | G_IO_HUP | G_IO_ERR
  wfds -> G_IO_OUT | G_IO_ERR
  xfds -> G_IO_PRI

I came up with this table by looking at Linux fs/select.c which maps
select(2) to poll(2) internally.

Another detail to watch out for are the global variables that reference
rfds/wfds/xfds during slirp_select_poll().  sofcantrcvmore() and
sofcantsendmore() use these globals to clear fd_set bits.  When
sofcantrcvmore() is called, the wfds bit is cleared so that the write
handler will no longer be run for this iteration of the event loop.

This actually seems buggy to me since TCP connections can be half-closed
and we'd still want to handle data in half-duplex fashion.  I think the
real intention is to avoid running the read/write handler when the
socket has been fully closed.  This is indicated with the SS_NOFDREF
state bit so we now check for it before invoking the TCP write handler.
Note that UDP/ICMP code paths don't care because they are
connectionless.

Note that slirp/ has a lot of tabs and sometimes mixed tabs with spaces.
I followed the style of the surrounding code.

Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Message-id: 1361356113-11049-6-git-send-email-stefanha@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-02-21 16:17:31 -06:00
Stefan Hajnoczi cf1d078e4e slirp: slirp/slirp.c coding style cleanup
The slirp glue code uses tabs in some places.  Since the next patch will
modify the file, convert tabs to spaces and fix checkpatch.pl issues.

Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Message-id: 1361356113-11049-5-git-send-email-stefanha@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-02-21 16:17:30 -06:00
Markus Armbruster c64f50d1e2 g_strdup(NULL) returns NULL; simplify
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-01-30 11:14:46 +01:00
Paolo Bonzini 927d4878b0 softmmu: move remaining include files to include/ subdirectories
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2012-12-19 08:32:46 +01:00
Paolo Bonzini 1de7afc984 misc: move include files to include/qemu/
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2012-12-19 08:32:39 +01:00
Klaus Stengel 63d2960bc4 slirp: Add domain-search option to slirp's DHCP server
This patch will allow the user to include the domain-search option in
replies from the built-in DHCP server. The domain suffixes can be
specified by adding dnssearch= entries to the "-net user" parameter.

[Jan: tiny style adjustments]

Signed-off-by: Klaus Stengel <Klaus.Stengel@asamnet.de>
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
2012-11-15 10:27:14 +01:00
Anthony Liguori 0b8db8fe15 slirp: fix build on mingw32
in_addr_t isn't available on mingw32.  Just use an unsigned long instead.  I
considered typedef'ing in_addr_t on mingw32 but this would potentially be
brittle if mingw32 did introduce the type.

Cc: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-08-06 19:31:55 -05:00
Anders Waldenborg 648cd33e73 slirp: Handle whole 127.0.0.0/8 network as local addresses.
Changes so translation of remote address to the host's ip address in
the virtual network happens for all addresses in the 127.0.0.0/8
network, not just 127.0.0.1.

This fixes so that hostfwd bound to addresses such as 127.0.0.2 works.

Signed-off-by: Anders Waldenborg <anders@0x63.nu>
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
2012-08-03 23:31:52 +02:00
Stefano Stabellini 7c7db75576 main_loop_wait: block indefinitely
- remove qemu_calculate_timeout;

- explicitly size timeout to uint32_t;

- introduce slirp_update_timeout;

- pass NULL as timeout argument to select in case timeout is the maximum
value;

Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Acked-by: Paul Brook <paul@codesourcery.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-04-26 13:14:58 -05:00
Jan Kiszka a68adc2206 slirp: Cleanup resources on instance removal
Close & free sockets when shutting down a slirp instance, also release
all buffers.

CC: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
2012-03-13 14:05:49 +01:00
Jan Kiszka f373431977 slirp: Remove unneeded if_queued
There is now a trivial check on entry of if_start for pending packets,
so we can drop the additional tracking via if_queued.

Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
2012-03-13 14:05:49 +01:00
Anthony Liguori 2cc6e0a142 char: rename qemu_chr_write() -> qemu_chr_fe_write()
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-08-22 10:17:15 -05:00
Anthony Liguori 7267c0947d Use glib memory allocation and free functions
qemu_malloc/qemu_free no longer exist after this commit.

Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-08-20 23:01:08 -05:00
Jan Kiszka e3a110b527 slirp: Only start packet expiration for delayed ones
The expiration timeout must only affect packets that are queued due to
pending ARP resolutions. The old version broke ping e.g.

Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
2011-08-05 14:05:53 +02:00
Fabien Chouteau 1ab74cea06 Delayed IP packets
In the current implementation, if Slirp tries to send an IP packet to a client
with an unknown hardware address, the packet is simply dropped and an ARP
request is sent (if_encap in slirp/slirp.c).

With this patch, Slirp will send the ARP request, re-queue the packet and try
to send it later. The packet is dropped after one second if the ARP reply is
not received.

Signed-off-by: Fabien Chouteau <chouteau@adacore.com>
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
2011-08-03 12:57:11 +02:00
Fabien Chouteau 1a0ca1e1f6 Simple ARP table
This patch adds a simple ARP table in Slirp and also adds handling of
gratuitous ARP requests.

Signed-off-by: Fabien Chouteau <chouteau@adacore.com>
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
2011-08-03 12:57:06 +02:00
Blue Swirl 00aa0040e8 Wrap recv to avoid warnings
Avoid warnings like these by wrapping recv():
  CC    slirp/ip_icmp.o
/src/qemu/slirp/ip_icmp.c: In function 'icmp_receive':
/src/qemu/slirp/ip_icmp.c:418:5: error: passing argument 2 of 'recv' from incompatible pointer type [-Werror]
/usr/local/lib/gcc/i686-mingw32msvc/4.6.0/../../../../i686-mingw32msvc/include/winsock2.h:547:32: note: expected 'char *' but argument is of type 'struct icmp *'

Remove also casts used to avoid warnings.

Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-07-25 14:38:56 +00:00
Jan Kiszka e6d43cfb1f slirp: Forward ICMP echo requests via unprivileged sockets
Linux 3.0 gained support for unprivileged ICMP ping sockets. Use this
feature to forward guest pings to the outer world. The host admin has to
set the ping_group_range in order to grant access to those sockets. To
allow ping for the users group (GID 100):

echo 100 100 > /proc/sys/net/ipv4/ping_group_range

Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-07-23 10:19:50 -05:00
Paolo Bonzini 7bd427d801 change all rt_clock references to use millisecond resolution accessors
This was done with:

    sed -i '/get_clock\>.*rt_clock/s/get_clock\>/get_clock_ms/' \
        $(git grep -l 'get_clock\>.*rt_clock' )
    sed -i '/new_timer\>.*rt_clock/s/new_timer\>/new_timer_ms/' \
        $(git grep -l 'new_timer\>.*rt_clock' )

after checking that get_clock and new_timer never occur twice
on the same line.  There were no missed occurrences; however, even
if there had been, they would have been caught by the compiler.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2011-03-21 09:23:23 +01:00
Hervé Poussineau dbf3c4b4ba Make ARP replies at least 64 bytes long
IEEE 802.3 standard requires Ethernet frames to be at least 64 bytes long.
If it is not the case, they will be considered as runt frames, and may be ignored by netcard and/or OS

Signed-off-by: Hervé Poussineau <hpoussin@reactos.org>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
2010-09-17 12:46:27 +02:00
Alex Williamson 0be71e324f savevm: Add DeviceState param
When available, we'd like to be able to access the DeviceState
when registering a savevm.  For buses with a get_dev_path()
function, this will allow us to create more unique savevm
id strings.

Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-07-06 10:36:28 -05:00