Save target's siginfo into gdbserver_state so it can be used later, for
example, in any stub that requires the target's si_signo and si_code.
This change affects only linux-user mode.
Signed-off-by: Gustavo Romero <gustavo.romero@linaro.org>
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20240309030901.1726211-4-gustavo.romero@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
The upcoming follow-fork-mode child support requires post-fork message
exchange between the parent and the child. Prepare gdbserver_fork() for
this purpose. Rename it to gdbserver_fork_end() to better reflect its
purpose.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Message-Id: <20240219141628.246823-8-iii@linux.ibm.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20240305121005.3528075-9-alex.bennee@linaro.org>
The upcoming follow-fork-mode child support requires knowing the child
pid. Pass it down.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Message-Id: <20240219141628.246823-7-iii@linux.ibm.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20240305121005.3528075-8-alex.bennee@linaro.org>
The upcoming follow-fork-mode child support requires knowing the child
pid. Pass it down.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Message-Id: <20240219141628.246823-6-iii@linux.ibm.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20240305121005.3528075-7-alex.bennee@linaro.org>
The upcoming follow-fork-mode child support requires knowing when
fork() is about to happen in order to initialize its state. Add a hook
for that.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Message-Id: <20240219141628.246823-5-iii@linux.ibm.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20240305121005.3528075-6-alex.bennee@linaro.org>
Currently ts_tid contains the parent tid after fork(), which is not
correct. So far it has not affected anything, but the upcoming
follow-fork-mode child support relies on the correct value, so fix it.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Reviewed-by: Warner Losh <imp@bsdimp.com>
Message-Id: <20240219141628.246823-4-iii@linux.ibm.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20240305121005.3528075-5-alex.bennee@linaro.org>
Move qemu_host_page_{size,mask} and HOST_PAGE_ALIGN into bsd-user.
It should be removed from bsd-user as well, but defer that cleanup.
Reviewed-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Ilya Leoshkevich <iii@linux.ibm.com>
Acked-by: Helge Deller <deller@gmx.de>
Message-Id: <20240102015808.132373-28-richard.henderson@linaro.org>
This option controls the host page size. From the mis-usage in
our own testsuite, this is easily confused with guest page size.
The only thing that occurs when changing the host page size is
that stuff breaks, because one cannot actually change the host
page size. Therefore reject all but the no-op setting as part
of the deprecation process.
Reviewed-by: Warner Losh <imp@bsdimp.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Acked-by: Helge Deller <deller@gmx.de>
Message-Id: <20240102015808.132373-27-richard.henderson@linaro.org>
This option has been deprecated before the 8.1 release,
in commit 12fd0f41d0 ("Document that -singlestep command
line option is deprecated"). Time to drop it.
Inspired-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-ID: <20240117151430.29235-4-philmd@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Add generic cpu_list() to replace the individual target's implementation
in the subsequent commits. Currently, there are 3 targets with no cpu_list()
implementation: microblaze and nios2. With this applied, those two targets
switch to the generic cpu_list().
[gshan@gshan q]$ ./build/qemu-system-microblaze -cpu ?
Available CPUs:
microblaze-cpu
[gshan@gshan q]$ ./build/qemu-system-nios2 -cpu ?
Available CPUs:
nios2-cpu
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Gavin Shan <gshan@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20231114235628.534334-7-gshan@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Fix:
hw/core/machine.c:1302:22: error: declaration shadows a variable in the global scope [-Werror,-Wshadow]
const CPUArchId *cpus = possible_cpus->cpus;
^
hw/core/numa.c:69:17: error: declaration shadows a variable in the global scope [-Werror,-Wshadow]
uint16List *cpus = NULL;
^
hw/acpi/aml-build.c:2005:20: error: declaration shadows a variable in the global scope [-Werror,-Wshadow]
CPUArchIdList *cpus = ms->possible_cpus;
^
hw/core/machine-smp.c:77:14: error: declaration shadows a variable in the global scope [-Werror,-Wshadow]
unsigned cpus = config->has_cpus ? config->cpus : 0;
^
include/hw/core/cpu.h:589:17: note: previous declaration is here
extern CPUTailQ cpus;
^
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Ani Sinha <anisinha@redhat.com>
Message-Id: <20231010115048.11856-2-philmd@linaro.org>
The tcg/tcg.h header is a big bucket, containing stuff related to
the translators and the JIT backend. The places that initialize
tcg or create new threads do not need all of that, so split out
these three functions to a new header.
Suggested-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
We can load tcg_ctx just as easily within the callee.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Stacey Son <sson@FreeBSD.org>
Signed-off-by: Karim Taha <kariem.taha2.7@gmail.com>
Reviewed-by: Warner Losh <imp@bsdimp.com>
Message-Id: <20230925182425.3163-21-kariem.taha2.7@gmail.com>
This has the same value is image_info.brk, which is also logged,
and is otherwise unused.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230818175736.144194-4-richard.henderson@linaro.org>
Reviewed-by: Warner Losh <imp@bsdimp.com>
Signed-off-by: Warner Losh <imp@bsdimp.com>
With reserved_va, mmap.c expects to have pre-allocated host address
space for the entire guest address space. When combined with the -B
command-line option, ensure that the chosen address does not overlap
anything else. Ensure that mmap_next_start is within reserved_va,
as we use it within mmap.c without checking.
Reviewed by: Warner Losh <imp@bsdimp.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230727161148.444988-1-richard.henderson@linaro.org>
Do not reverse the order of environment variables in the target environ
array relative to the incoming environ order. Some testsuites depend on a
specific order, even though it is not defined by any standard.
Signed-off-by: Andreas Schwab <schwab@suse.de>
Reviewed-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <mvmlejfsivd.fsf@suse.de>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
The '-singlestep' option is confusing, because it doesn't actually
have anything to do with single-stepping the CPU. What it does do
is force TCG emulation to put one guest instruction in each TB,
which can be useful in some situations.
Create a new command line argument -one-insn-per-tb, so we can
document that -singlestep is just a deprecated synonym for it,
and eventually perhaps drop it.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20230417164041.684562-6-peter.maydell@linaro.org
The only place left that looks at the old 'singlestep' global
variable is the TCG curr_cflags() function. Replace the old global
with a new 'one_insn_per_tb' which is defined in tcg-all.c and
declared in accel/tcg/internal.h. This keeps it restricted to the
TCG code, unlike 'singlestep' which was available to every file in
the system and defined in multiple different places for softmmu vs
linux-user vs bsd-user.
While we're making this change, use qatomic_read() and qatomic_set()
on the accesses to the new global, because TCG will read it without
holding a lock.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20230417164041.684562-4-peter.maydell@linaro.org
This commit adds 'one-insn-per-tb' as a property on the TCG
accelerator object, so you can enable it with
-accel tcg,one-insn-per-tb=on
It has the same behaviour as the existing '-singlestep' command line
option. We use a different name because 'singlestep' has always been
a confusing choice, because it doesn't have anything to do with
single-stepping the CPU. What it does do is force TCG emulation to
put one guest instruction in each TB, which can be useful in some
situations (such as analysing debug logs).
The existing '-singlestep' commandline options are decoupled from the
global 'singlestep' variable and instead now are syntactic sugar for
setting the accel property. (These can then go away after a
deprecation period.)
The global variable remains for the moment as:
* what the TCG code looks at to change its behaviour
* what HMP and QMP use to query and set the behaviour
In the following commits we'll clean those up to not directly
look at the global variable.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230417164041.684562-2-peter.maydell@linaro.org
Change the semantics to be the last byte of the guest va, rather
than the following byte. This avoids some overflow conditions.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The process was pretty similar to the softmmu move except we take the
time to split stuff between user.c and user-target.c to avoid as much
target specific compilation as possible. We also start to make use of
our shiny new header scheme so the user-only helpers can be included
without the rest of the exec/gsbstub.h cruft.
As before we split some functions into user and softmmu versions
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20230302190846.2593720-12-alex.bennee@linaro.org>
Message-Id: <20230303025805.625589-12-richard.henderson@linaro.org>
This commit was created with scripts/clean-includes.
All .c should include qemu/osdep.h first. The script performs three
related cleanups:
* Ensure .c files include qemu/osdep.h first.
* Including it in a .h is redundant, since the .c already includes
it. Drop such inclusions.
* Likewise, including headers qemu/osdep.h includes is redundant.
Drop these, too.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-Id: <20230202133830.2152150-6-armbru@redhat.com>
This header only defines the tcg_allowed variable and the tcg_enabled()
function - which are not required in many files that include this
header. Drop the #include statement there.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20220315144107.1012530-1-thuth@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Perform all logfile setup in one step.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220417183019.755276-29-richard.henderson@linaro.org>
We have extra stuff to log at the same time.
Hoist the qemu_log_trylock/unlock to the caller and use fprintf.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220417183019.755276-22-richard.henderson@linaro.org>
Do not force exit within qemu_set_log; return bool and pass
an Error value back up the stack as per usual.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220417183019.755276-5-richard.henderson@linaro.org>
This buffering was introduced during the Paleozoic: 9fa3e85353.
There has never been an explanation as to why we may not allow
glibc to allocate the file buffer itself. We certainly have
many other uses of mmap and malloc during user-only startup,
so presumably whatever the issue was, it has been fixed during
the preceeding 18 years.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220417183019.755276-2-richard.henderson@linaro.org>
Remove keeping track of which type of bsd we're running on. It's no
longer referenced in the code. Building bsd-user on NetBSD or OpenBSD
isn't possible, let alone running that code. Stop pretending that we can
do the cross BSD thing since there's been a large divergence since 2000
that makes this nearly impossible between FreeBSD and {Net,Open}BSD and
at least quite difficult between NetBSD and OpenBSD.
Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Kyle Evans <kevans@FreeBSD.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
We've not realistically been able to actually run any bsd program on any
other bsd program. They are too diverged to do this easily. The current
code is setup to do it, but implementing it is hard. Stop pretending
that we can do this.
Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
setup_frame sets up a signalled stack frame. Associated routines to
extract the pointer to the stack frame and to support alternate stacks.
Signed-off-by: Stacey Son <sson@FreeBSD.org>
Signed-off-by: Kyle Evans <kevans@freebsd.org>
Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
bsd-user was copied from linux-user at a time when it queued
signals. Remove those vestiges of thse code. Retain the init function,
even though it's now empty since other stuff will likely be added
there. Make it static since it's not called from outside of main.c
Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Similar to the same function in linux-user: this stops all the current tasks.
Signed-off-by: Stacey Son <sson@FreeBSD.org>
Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Kyle Evans <kevans@FreeBSD.org>
The 'used' field in TaskState is write only. Remove it from TaskState.
Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Kyle Evans <kevans@FreeBSD.org>
Update the reserved base based on what platform we're on, as well as the
start of the mmap range. Update routines that find va ranges to interact
with the reserved ranges as well as properly align the mapping (this is
especially important for targets whose page size does not match the
host's). Loop where appropriate when the initial address space offered
by mmap does not meet the contraints.
This has 18e80c55bb from linux-user folded in to the upstream
bsd-user code as well.
Signed-off-by: Mikaël Urankar <mikael.urankar@gmail.com>
Signed-off-by: Stacey Son <sson@FreeBSD.org>
Signed-off-by: Warner Losh <imp@bsdimp.com>
Acked-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Kyle Evans <kevans@FreeBSD.org>
Previously it was impossible to emulate a program with a file name
different from its argv[0]. With this change, you can run
qemu -0 fakename realname args
which runs the program "realname" with an argv of "fakename args".
Signed-off-by: Colin Percival <cperciva@tarsnap.com>
Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Implement the internlock in fork_start() and fork_end() to properly cope
with atomic operations and to safely keep state for parent and child
processes.
Signed-off-by: Stacey Son <sson@FreeBSD.org>
Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Copy --seed implementation (translated from linux-user's newer command
line scheme to the older one bsd-user still uses). Initialize the
randomness with the glib if a specific seed is specified or use the
qcrypto library if not.
Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Eliminate the x86 specific stack stuff in favor of more generic control
over the process size:
target_maxtsiz max text size
target_dfldsiz initial data size limit
target_maxdsiz max data size
target_dflssiz initial stack size limit
target_maxssiz max stack size
target_sgrowsiz amount to grow stack
These can be set on a per-arch basis, and the stack size can be set
on the command line. Adjust the stack size parameters at startup.
Signed-off-by: Stacey Son <sson@FreeBSD.org>
Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Move cpu_loop() into target_cpu_loop(), and put that in
target_arch_cpu.h for each architecture.
Signed-off-by: Stacey Son <sson@FreeBSD.org>
Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Move the CPU functions into target_arch_cpu.c that are unique to each
CPU. These are defined in target_arch.h.
Signed-off-by: Stacey Son <sson@FreeBSD.org>
Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Save the path to the qemu emulator. This will be used later when we have
a more complete implementation of exec.
Signed-off-by: Stacey Son <sson@FreeBSD.org>
Signed-off-by: Warner Losh <imp@bsdimp.com>
Acked-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Kyle Evans <kevans@FreeBSD.org>
Include host-os.h from main.c to pick up the default OS to emulate. Set
that default in main().
Signed-off-by: Stacey Son <sson@FreeBSD.org>
Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
All compilers for some time have supported this. Follow linux-user and
eliminate the #define THREAD and unconditionally insert __thread where
needed. Please insert: "(see 24cb36a61c6: "configure: Make NPTL
non-optional")"
Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Pass the bsd_param into loader_exec, and adjust. We use it to track the
inital stack allocation and to set stack, open files, and other state
shared between bsdload.c and elfload.c
Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Gustavo Romero
Ilya Leoshkevich
Richard Henderson
Philippe Mathieu-Daudé
Gavin Shan
Stefan Hajnoczi
Stacey Son
Andreas Schwab
Peter Maydell
Alex Bennée
Markus Armbruster
Marc-André Lureau
Thomas Huth
Warner Losh
Warner Losh
Colin Percival