Commit Graph

400 Commits

Author SHA1 Message Date
Frédéric Pétrot
7fd40f8679 target/riscv: support for 128-bit arithmetic instructions
Addition of 128-bit adds and subs in their various sizes,
"set if less than"s and branches.
Refactored the code to have a comparison function used for both stls and
branches.

Signed-off-by: Frédéric Pétrot <frederic.petrot@univ-grenoble-alpes.fr>
Co-authored-by: Fabien Portas <fabien.portas@grenoble-inp.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20220106210108.138226-14-frederic.petrot@univ-grenoble-alpes.fr
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2022-01-08 15:46:10 +10:00
Frédéric Pétrot
6bf4bbed20 target/riscv: support for 128-bit shift instructions
Handling shifts for 32, 64 and 128 operation length for RV128, following the
general framework for handling various olens proposed by Richard.

Signed-off-by: Frédéric Pétrot <frederic.petrot@univ-grenoble-alpes.fr>
Co-authored-by: Fabien Portas <fabien.portas@grenoble-inp.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20220106210108.138226-13-frederic.petrot@univ-grenoble-alpes.fr
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2022-01-08 15:46:10 +10:00
Frédéric Pétrot
57c108b864 target/riscv: support for 128-bit U-type instructions
Adding the 128-bit version of lui and auipc, and introducing to that end
a "set register with immediat" function to handle extension on 128 bits.

Signed-off-by: Frédéric Pétrot <frederic.petrot@univ-grenoble-alpes.fr>
Co-authored-by: Fabien Portas <fabien.portas@grenoble-inp.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20220106210108.138226-12-frederic.petrot@univ-grenoble-alpes.fr
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2022-01-08 15:46:10 +10:00
Frédéric Pétrot
a2f827ff4f target/riscv: accessors to registers upper part and 128-bit load/store
Get function to retrieve the 64 top bits of a register, stored in the gprh
field of the cpu state. Set function that writes the 128-bit value at once.
The access to the gprh field can not be protected at compile time to make
sure it is accessed only in the 128-bit version of the processor because we
have no way to indicate that the misa_mxl_max field is const.

The 128-bit ISA adds ldu, lq and sq. We provide support for these
instructions. Note that (a) we compute only 64-bit addresses to actually
access memory, cowardly utilizing the existing address translation mechanism
of QEMU, and (b) we assume for now little-endian memory accesses.

Signed-off-by: Frédéric Pétrot <frederic.petrot@univ-grenoble-alpes.fr>
Co-authored-by: Fabien Portas <fabien.portas@grenoble-inp.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20220106210108.138226-10-frederic.petrot@univ-grenoble-alpes.fr
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2022-01-08 15:46:10 +10:00
Frédéric Pétrot
76a361066f target/riscv: moving some insns close to similar insns
lwu and ld are functionally close to the other loads, but were after the
stores in the source file.
Similarly, xor was away from or and and by two arithmetic functions, while
the immediate versions were nicely put together.
This patch moves the aforementioned loads after lhu, and xor above or,
where they more logically belong.

Signed-off-by: Frédéric Pétrot <frederic.petrot@univ-grenoble-alpes.fr>
Co-authored-by: Fabien Portas <fabien.portas@grenoble-inp.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20220106210108.138226-9-frederic.petrot@univ-grenoble-alpes.fr
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2022-01-08 15:46:10 +10:00
Frédéric Pétrot
a1a3aac448 target/riscv: separation of bitwise logic and arithmetic helpers
Introduction of a gen_logic function for bitwise logic to implement
instructions in which no propagation of information occurs between bits and
use of this function on the bitwise instructions.

Signed-off-by: Frédéric Pétrot <frederic.petrot@univ-grenoble-alpes.fr>
Co-authored-by: Fabien Portas <fabien.portas@grenoble-inp.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20220106210108.138226-6-frederic.petrot@univ-grenoble-alpes.fr
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2022-01-08 15:46:10 +10:00
Frédéric Pétrot
fc313c6434 exec/memop: Adding signedness to quad definitions
Renaming defines for quad in their various forms so that their signedness is
now explicit.
Done using git grep as suggested by Philippe, with a bit of hand edition to
keep assignments aligned.

Signed-off-by: Frédéric Pétrot <frederic.petrot@univ-grenoble-alpes.fr>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20220106210108.138226-2-frederic.petrot@univ-grenoble-alpes.fr
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2022-01-08 15:46:10 +10:00
Frank Chang
79e6176ea0 target/riscv: rvv-1.0: Call the correct RVF/RVD check function for narrowing fp/int type-convert insns
vfncvt.f.xu.w, vfncvt.f.x.w convert double-width integer to single-width
floating-point. Therefore, should use require_rvf() to check whether
RVF/RVD is enabled.

vfncvt.f.f.w, vfncvt.rod.f.f.w convert double-width floating-point to
single-width integer. Therefore, should use require_scale_rvf() to check
whether RVF/RVD is enabled.

Signed-off-by: Frank Chang <frank.chang@sifive.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20220105022247.21131-4-frank.chang@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2022-01-08 15:46:09 +10:00
Frank Chang
91cade44cd target/riscv: rvv-1.0: Call the correct RVF/RVD check function for widening fp/int type-convert insns
vfwcvt.xu.f.v, vfwcvt.x.f.v, vfwcvt.rtz.xu.f.v and vfwcvt.rtz.x.f.v
convert single-width floating-point to double-width integer.
Therefore, should use require_rvf() to check whether RVF/RVD is enabled.

vfwcvt.f.xu.v, vfwcvt.f.x.v convert single-width integer to double-width
floating-point, and vfwcvt.f.f.v convert double-width floating-point to
single-width floating-point. Therefore, should use require_scale_rvf() to
check whether RVF/RVD is enabled.

Signed-off-by: Frank Chang <frank.chang@sifive.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20220105022247.21131-3-frank.chang@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2022-01-08 15:46:09 +10:00
Frank Chang
629ccdaa4e target/riscv: rvv-1.0: Call the correct RVF/RVD check function for widening fp insns
Vector widening floating-point instructions should use
require_scale_rvf() instead of require_rvf() to check whether RVF/RVD is
enabled.

Signed-off-by: Frank Chang <frank.chang@sifive.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20220105022247.21131-2-frank.chang@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2022-01-08 15:46:09 +10:00
Frank Chang
cc13aa3614 target/riscv: rvv-1.0: Add ELEN checks for widening and narrowing instructions
SEW has the limitation which cannot exceed ELEN.

Widening instructions have a destination group with EEW = 2*SEW
and narrowing instructions have a source operand with EEW = 2*SEW.
Both of the instructions have the limitation of: 2*SEW <= ELEN.

Signed-off-by: Frank Chang <frank.chang@sifive.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20211210075704.23951-78-frank.chang@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2021-12-20 14:53:31 +10:00
Frank Chang
45ca2ca6bd target/riscv: rvv-1.0: update opivv_vadc_check() comment
Vector Integer Add-with-Carry / Subtract-with-Borrow Instructions is
moved to Section 11.4 in RVV v1.0 spec. Update the comment, no
functional changes.

Signed-off-by: Frank Chang <frank.chang@sifive.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20211210075704.23951-77-frank.chang@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2021-12-20 14:53:31 +10:00
Frank Chang
9c0d2559de target/riscv: rvv-1.0: rename vmandnot.mm and vmornot.mm to vmandn.mm and vmorn.mm
Signed-off-by: Frank Chang <frank.chang@sifive.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20211210075704.23951-76-frank.chang@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2021-12-20 14:53:31 +10:00
Frank Chang
26086aea0d target/riscv: rvv-1.0: add vector unit-stride mask load/store insns
Signed-off-by: Frank Chang <frank.chang@sifive.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20211210075704.23951-75-frank.chang@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2021-12-20 14:53:31 +10:00
Frank Chang
34a2c2d81a target/riscv: rvv-1.0: add vsetivli instruction
Signed-off-by: Frank Chang <frank.chang@sifive.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20211210075704.23951-73-frank.chang@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2021-12-20 14:53:31 +10:00
Frank Chang
55c35407c3 target/riscv: rvv-1.0: floating-point reciprocal estimate instruction
Implement the floating-point reciprocal estimate to 7 bits instruction.

Signed-off-by: Frank Chang <frank.chang@sifive.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20211210075704.23951-71-frank.chang@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2021-12-20 14:53:31 +10:00
Frank Chang
e848a1e563 target/riscv: rvv-1.0: floating-point reciprocal square-root estimate instruction
Implement the floating-point reciprocal square-root estimate to 7 bits
instruction.

Signed-off-by: Frank Chang <frank.chang@sifive.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20211210075704.23951-70-frank.chang@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2021-12-20 14:53:31 +10:00
Frank Chang
d6c4d3f2a6 target/riscv: rvv-1.0: trigger illegal instruction exception if frm is not valid
If the frm field contains an invalid rounding mode (101-111),
attempting to execute any vector floating-point instruction, even
those that do not depend on the rounding mode, will raise an illegal
instruction exception.

Call gen_set_rm() with DYN rounding mode to check and trigger illegal
instruction exception if frm field contains invalid value at run-time
for vector floating-point instructions.

Signed-off-by: Frank Chang <frank.chang@sifive.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20211210075704.23951-68-frank.chang@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2021-12-20 14:53:31 +10:00
Frank Chang
f714361ed7 target/riscv: rvv-1.0: implement vstart CSR
* Update and check vstart value for vector instructions.
* Add whole register move instruction helper functions as we have to
  call helper function for case where vstart is not zero.
* Remove probe_pages() calls in vector load/store instructions
  (except fault-only-first loads) to raise the memory access exception
  at the exact processed vector element.

Signed-off-by: Frank Chang <frank.chang@sifive.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20211210075704.23951-67-frank.chang@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2021-12-20 14:53:31 +10:00
Frank Chang
8a4b52575a target/riscv: rvv-1.0: relax RV_VLEN_MAX to 1024-bits
Signed-off-by: Frank Chang <frank.chang@sifive.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20211210075704.23951-66-frank.chang@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2021-12-20 14:53:31 +10:00
Frank Chang
ff679b58e3 target/riscv: rvv-1.0: narrowing floating-point/integer type-convert
Signed-off-by: Frank Chang <frank.chang@sifive.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20211210075704.23951-65-frank.chang@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2021-12-20 14:53:31 +10:00
Frank Chang
3ce4c09df7 target/riscv: rvv-1.0: widening floating-point/integer type-convert
Add the following instructions:

* vfwcvt.rtz.xu.f.v
* vfwcvt.rtz.x.f.v

Also adjust GEN_OPFV_WIDEN_TRANS() to accept multiple floating-point
rounding modes.

Signed-off-by: Frank Chang <frank.chang@sifive.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20211210075704.23951-63-frank.chang@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2021-12-20 14:53:31 +10:00
Frank Chang
900da87ab9 target/riscv: rvv-1.0: floating-point/integer type-convert instructions
Add the following instructions:

* vfcvt.rtz.xu.f.v
* vfcvt.rtz.x.f.v

Also adjust GEN_OPFV_TRANS() to accept multiple floating-point rounding
modes.

Signed-off-by: Frank Chang <frank.chang@sifive.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20211210075704.23951-62-frank.chang@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2021-12-20 14:53:31 +10:00
Frank Chang
986c895de1 target/riscv: introduce floating-point rounding mode enum
Signed-off-by: Frank Chang <frank.chang@sifive.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20211210075704.23951-61-frank.chang@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2021-12-20 14:53:31 +10:00
Frank Chang
c3536f2f55 target/riscv: rvv-1.0: remove integer extract instruction
Signed-off-by: Frank Chang <frank.chang@sifive.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20211210075704.23951-59-frank.chang@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2021-12-20 14:53:31 +10:00
Frank Chang
e29c5cefd8 target/riscv: rvv-1.0: remove vmford.vv and vmford.vf
Signed-off-by: Frank Chang <frank.chang@sifive.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20211210075704.23951-58-frank.chang@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2021-12-20 14:53:31 +10:00
Frank Chang
a12c812d19 target/riscv: rvv-1.0: remove widening saturating scaled multiply-add
Signed-off-by: Frank Chang <frank.chang@sifive.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20211210075704.23951-57-frank.chang@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2021-12-20 14:53:31 +10:00
Frank Chang
74eb7834bc target/riscv: rvv-1.0: single-width scaling shift instructions
log(SEW) truncate vssra.vi immediate value.

Signed-off-by: Frank Chang <frank.chang@sifive.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20211210075704.23951-56-frank.chang@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2021-12-20 14:53:31 +10:00
Frank Chang
b8dd99f2d1 target/riscv: rvv-1.0: widening floating-point reduction instructions
Signed-off-by: Frank Chang <frank.chang@sifive.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20211210075704.23951-55-frank.chang@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2021-12-20 14:53:31 +10:00
Frank Chang
08b60eebc4 target/riscv: rvv-1.0: single-width floating-point reduction
Signed-off-by: Frank Chang <frank.chang@sifive.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20211210075704.23951-54-frank.chang@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2021-12-20 14:53:31 +10:00
Frank Chang
a70b3a73e7 target/riscv: rvv-1.0: narrowing fixed-point clip instructions
Signed-off-by: Frank Chang <frank.chang@sifive.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20211210075704.23951-53-frank.chang@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2021-12-20 14:53:31 +10:00
Frank Chang
8500d4ab2e target/riscv: rvv-1.0: floating-point slide instructions
Add the following instructions:

* vfslide1up.vf
* vfslide1down.vf

Signed-off-by: Frank Chang <frank.chang@sifive.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20211210075704.23951-52-frank.chang@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2021-12-20 14:53:31 +10:00
Frank Chang
50f6696c0f target/riscv: rvv-1.0: mask-register logical instructions
Signed-off-by: Frank Chang <frank.chang@sifive.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20211210075704.23951-50-frank.chang@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2021-12-20 14:51:36 +10:00
Frank Chang
063f8bbca0 target/riscv: rvv-1.0: integer comparison instructions
* Sign-extend vmselu.vi and vmsgtu.vi immediate values.
* Remove "set tail elements to zeros" as tail elements can be unchanged
  for either VTA to have undisturbed or agnostic setting.

Signed-off-by: Frank Chang <frank.chang@sifive.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20211210075704.23951-48-frank.chang@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2021-12-20 14:51:36 +10:00
Frank Chang
d6be7a3504 target/riscv: rvv-1.0: single-width saturating add and subtract instructions
Sign-extend vsaddu.vi immediate value.

Signed-off-by: Frank Chang <frank.chang@sifive.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20211210075704.23951-47-frank.chang@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2021-12-20 14:51:36 +10:00
Frank Chang
7daa5852bc target/riscv: rvv-1.0: narrowing integer right shift instructions
Signed-off-by: Frank Chang <frank.chang@sifive.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20211210075704.23951-45-frank.chang@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2021-12-20 14:51:36 +10:00
Frank Chang
bb45485ad1 target/riscv: rvv-1.0: integer add-with-carry/subtract-with-borrow
* Only do carry-in or borrow-in if is masked (vm=0).
* Remove clear function from helper functions as the tail elements
  are unchanged in RVV 1.0.

Signed-off-by: Frank Chang <frank.chang@sifive.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20211210075704.23951-44-frank.chang@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2021-12-20 14:51:36 +10:00
Frank Chang
a75ae09f2a target/riscv: rvv-1.0: single-width bit shift instructions
Truncate vsll.vi, vsrl.vi, vsra.vi's immediate values to lg2(SEW) bits.

Signed-off-by: Frank Chang <frank.chang@sifive.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20211210075704.23951-43-frank.chang@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2021-12-20 14:51:36 +10:00
Frank Chang
8b99a110f7 target/riscv: rvv-1.0: single-width averaging add and subtract instructions
Add the following instructions:

* vaaddu.vv
* vaaddu.vx
* vasubu.vv
* vasubu.vx

Remove the following instructions:

* vadd.vi

Signed-off-by: Frank Chang <frank.chang@sifive.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20211210075704.23951-42-frank.chang@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2021-12-20 14:51:36 +10:00
Frank Chang
cd01340e75 target/riscv: rvv-1.0: integer extension instructions
Add the following instructions:

* vzext.vf2
* vzext.vf4
* vzext.vf8
* vsext.vf2
* vsext.vf4
* vsext.vf8

Signed-off-by: Frank Chang <frank.chang@sifive.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20211210075704.23951-41-frank.chang@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2021-12-20 14:51:36 +10:00
Frank Chang
6b85975e11 target/riscv: rvv-1.0: whole register move instructions
Add the following instructions:

* vmv1r.v
* vmv2r.v
* vmv4r.v
* vmv8r.v

Signed-off-by: Frank Chang <frank.chang@sifive.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20211210075704.23951-40-frank.chang@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2021-12-20 14:51:36 +10:00
Frank Chang
5c4eb8fb56 target/riscv: rvv-1.0: floating-point scalar move instructions
NaN-boxed the scalar floating-point register based on RVV 1.0's rules.

Signed-off-by: Frank Chang <frank.chang@sifive.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20211210075704.23951-39-frank.chang@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2021-12-20 14:51:36 +10:00
Frank Chang
c4b3e46f00 target/riscv: rvv-1.0: floating-point move instruction
NaN-boxed the scalar floating-point register based on RVV 1.0's rules.

Signed-off-by: Frank Chang <frank.chang@sifive.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20211210075704.23951-38-frank.chang@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2021-12-20 14:51:36 +10:00
Frank Chang
dedc53cbc9 target/riscv: rvv-1.0: integer scalar move instructions
* Remove "vmv.s.x: dothing if rs1 == 0" constraint.
* Add vmv.x.s instruction.

Signed-off-by: Frank Chang <frank.chang@sifive.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20211210075704.23951-37-frank.chang@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2021-12-20 14:51:36 +10:00
Frank Chang
50bfb45b2c target/riscv: rvv-1.0: register gather instructions
* Add vrgatherei16.vv instruction.

Signed-off-by: Frank Chang <frank.chang@sifive.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20211210075704.23951-36-frank.chang@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2021-12-20 14:51:36 +10:00
Frank Chang
308ee80578 target/riscv: rvv-1.0: allow load element with sign-extended
For some vector instructions (e.g. vmv.s.x), the element is loaded with
sign-extended.

Signed-off-by: Frank Chang <frank.chang@sifive.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20211210075704.23951-35-frank.chang@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2021-12-20 14:51:36 +10:00
Frank Chang
ee17eaa120 target/riscv: rvv-1.0: iota instruction
Signed-off-by: Frank Chang <frank.chang@sifive.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20211210075704.23951-33-frank.chang@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2021-12-20 14:51:36 +10:00
Frank Chang
40c1495d69 target/riscv: rvv-1.0: set-X-first mask bit instructions
Signed-off-by: Frank Chang <frank.chang@sifive.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20211210075704.23951-32-frank.chang@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2021-12-20 14:51:36 +10:00
Frank Chang
d71a24fc82 target/riscv: rvv-1.0: find-first-set mask bit instruction
Signed-off-by: Frank Chang <frank.chang@sifive.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20211210075704.23951-31-frank.chang@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2021-12-20 14:51:36 +10:00
Frank Chang
0014aa741d target/riscv: rvv-1.0: count population in mask instruction
Signed-off-by: Frank Chang <frank.chang@sifive.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20211210075704.23951-30-frank.chang@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2021-12-20 14:51:36 +10:00
Frank Chang
a689a82b7f target/riscv: rvv-1.0: take fractional LMUL into vector max elements calculation
Update vext_get_vlmax() and MAXSZ() to take fractional LMUL into
calculation for RVV 1.0.

Signed-off-by: Frank Chang <frank.chang@sifive.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20211210075704.23951-27-frank.chang@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2021-12-20 14:51:36 +10:00
Frank Chang
5a9f8e1552 target/riscv: rvv-1.0: update vext_max_elems() for load/store insns
Signed-off-by: Frank Chang <frank.chang@sifive.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20211210075704.23951-26-frank.chang@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2021-12-20 14:51:36 +10:00
Frank Chang
30206bd842 target/riscv: rvv-1.0: load/store whole register instructions
Add the following instructions:

* vl<nf>re<eew>.v
* vs<nf>r.v

Signed-off-by: Frank Chang <frank.chang@sifive.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20211210075704.23951-25-frank.chang@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2021-12-20 14:51:36 +10:00
Frank Chang
d3e5e2ff4f target/riscv: rvv-1.0: fault-only-first unit stride load
Signed-off-by: Frank Chang <frank.chang@sifive.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20211210075704.23951-24-frank.chang@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2021-12-20 14:51:36 +10:00
Frank Chang
08b9d0ed4a target/riscv: rvv-1.0: index load and store instructions
Signed-off-by: Frank Chang <frank.chang@sifive.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20211210075704.23951-22-frank.chang@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2021-12-20 14:51:36 +10:00
Frank Chang
79556fb6fa target/riscv: rvv-1.0: stride load and store instructions
Signed-off-by: Frank Chang <frank.chang@sifive.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20211210075704.23951-21-frank.chang@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2021-12-20 14:51:36 +10:00
Frank Chang
d9b7609a1f target/riscv: rvv-1.0: configure instructions
Signed-off-by: Frank Chang <frank.chang@sifive.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20211210075704.23951-20-frank.chang@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2021-12-20 14:51:36 +10:00
Frank Chang
57a2d89a82 target/riscv: rvv-1.0: remove amo operations instructions
Vector AMOs are removed from standard vector extensions. Will be added
later as separate Zvamo extension, but will need a different encoding
from earlier proposal.

Signed-off-by: Frank Chang <frank.chang@sifive.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20211210075704.23951-19-frank.chang@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2021-12-20 14:51:36 +10:00
Frank Chang
9b4a40a786 target/riscv: rvv:1.0: add translation-time nan-box helper function
* Add fp16 nan-box check generator function, if a 16-bit input is not
  properly nanboxed, then the input is replaced with the default qnan.
* Add do_nanbox() helper function to utilize gen_check_nanbox_X() to
  generate the NaN-boxed floating-point values based on SEW setting.
* Apply nanbox helper in opfvf_trans().

Signed-off-by: Frank Chang <frank.chang@sifive.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20211210075704.23951-18-frank.chang@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2021-12-20 14:51:36 +10:00
Frank Chang
ff64fc91d1 target/riscv: introduce more imm value modes in translator functions
Immediate value in translator function is extended not only
zero-extended and sign-extended but with more modes to be applicable
with multiple formats of vector instructions.

* IMM_ZX:         Zero-extended
* IMM_SX:         Sign-extended
* IMM_TRUNC_SEW:  Truncate to log(SEW) bit
* IMM_TRUNC_2SEW: Truncate to log(2*SEW) bit

Signed-off-by: Frank Chang <frank.chang@sifive.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20211210075704.23951-17-frank.chang@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2021-12-20 14:51:36 +10:00
Frank Chang
f31dacd720 target/riscv: rvv-1.0: update check functions
Update check functions with RVV 1.0 rules.

Signed-off-by: Frank Chang <frank.chang@sifive.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20211210075704.23951-16-frank.chang@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2021-12-20 14:51:36 +10:00
Frank Chang
f9298de514 target/riscv: rvv-1.0: remove MLEN calculations
As in RVV 1.0 design, MLEN is hardcoded with value 1 (Section 4.5).
Thus, remove all MLEN related calculations.

Signed-off-by: Frank Chang <frank.chang@sifive.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20211210075704.23951-13-frank.chang@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2021-12-20 14:51:36 +10:00
Frank Chang
8e1ee1fb57 target/riscv: rvv-1.0: add translation-time vector context status
Signed-off-by: LIU Zhiwei <zhiwei_liu@c-sky.com>
Signed-off-by: Frank Chang <frank.chang@sifive.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20211210075704.23951-8-frank.chang@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2021-12-20 14:51:36 +10:00
Frank Chang
2d258b428b target/riscv: zfh: implement zfhmin extension
Zfhmin extension is a subset of Zfh extension, consisting only of data
transfer and conversion instructions.

If enabled, only the following instructions from Zfh extension are
included:
  * flh, fsh, fmv.x.h, fmv.h.x, fcvt.s.h, fcvt.h.s
  * If D extension is present: fcvt.d.h, fcvt.h.d

Signed-off-by: Frank Chang <frank.chang@sifive.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20211210074329.5775-8-frank.chang@sifive.com
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2021-12-20 14:51:36 +10:00
Kito Cheng
6bc6fc96d1 target/riscv: zfh: half-precision floating-point classify
Signed-off-by: Kito Cheng <kito.cheng@sifive.com>
Signed-off-by: Chih-Min Chao <chihmin.chao@sifive.com>
Signed-off-by: Frank Chang <frank.chang@sifive.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20211210074329.5775-6-frank.chang@sifive.com
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2021-12-20 14:51:36 +10:00
Kito Cheng
11f9c450a6 target/riscv: zfh: half-precision floating-point compare
Signed-off-by: Kito Cheng <kito.cheng@sifive.com>
Signed-off-by: Chih-Min Chao <chihmin.chao@sifive.com>
Signed-off-by: Frank Chang <frank.chang@sifive.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20211210074329.5775-5-frank.chang@sifive.com
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2021-12-20 14:51:36 +10:00
Kito Cheng
7b03c8e5b5 target/riscv: zfh: half-precision convert and move
Signed-off-by: Kito Cheng <kito.cheng@sifive.com>
Signed-off-by: Chih-Min Chao <chihmin.chao@sifive.com>
Signed-off-by: Frank Chang <frank.chang@sifive.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20211210074329.5775-4-frank.chang@sifive.com
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2021-12-20 14:51:36 +10:00
Kito Cheng
00c1899f12 target/riscv: zfh: half-precision computational
Signed-off-by: Kito Cheng <kito.cheng@sifive.com>
Signed-off-by: Chih-Min Chao <chihmin.chao@sifive.com>
Signed-off-by: Frank Chang <frank.chang@sifive.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20211210074329.5775-3-frank.chang@sifive.com
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2021-12-20 14:51:36 +10:00
Kito Cheng
915f77b211 target/riscv: zfh: half-precision load and store
Signed-off-by: Kito Cheng <kito.cheng@sifive.com>
Signed-off-by: Chih-Min Chao <chihmin.chao@sifive.com>
Signed-off-by: Frank Chang <frank.chang@sifive.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20211210074329.5775-2-frank.chang@sifive.com
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2021-12-20 14:51:36 +10:00
Alexey Baturo
c655df7fe0 target/riscv: Support pointer masking for RISC-V for i/c/f/d/a types of instructions
Signed-off-by: Alexey Baturo <space.monkey.delivers@gmail.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20211025173609.2724490-7-space.monkey.delivers@gmail.com
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2021-10-28 14:39:23 +10:00
Richard Henderson
a0245d91dd target/riscv: Use gen_shift*_per_ol for RVB, RVI
Most shift instructions require a separate implementation
for RV32 when TARGET_LONG_BITS == 64.

Reviewed-by: LIU Zhiwei <zhiwei_liu@c-sky.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20211020031709.359469-14-richard.henderson@linaro.org
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2021-10-22 23:35:47 +10:00
Richard Henderson
fdab665f6e target/riscv: Use gen_unary_per_ol for RVB
The count zeros instructions require a separate implementation
for RV32 when TARGET_LONG_BITS == 64.

Reviewed-by: LIU Zhiwei <zhiwei_liu@c-sky.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20211020031709.359469-13-richard.henderson@linaro.org
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2021-10-22 23:35:47 +10:00
Richard Henderson
673be37163 target/riscv: Adjust trans_rev8_32 for riscv64
When target_long is 64-bit, we still want a 32-bit bswap for rev8.
Since this opcode is specific to RV32, we need not conditionalize.

Acked-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: LIU Zhiwei <zhiwei_liu@c-sky.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20211020031709.359469-12-richard.henderson@linaro.org
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2021-10-22 23:35:47 +10:00
Richard Henderson
80347ae9f2 target/riscv: Use gen_arith_per_ol for RVM
The multiply high-part instructions require a separate
implementation for RV32 when TARGET_LONG_BITS == 64.

Reviewed-by: LIU Zhiwei <zhiwei_liu@c-sky.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20211020031709.359469-11-richard.henderson@linaro.org
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2021-10-22 23:35:43 +10:00
Richard Henderson
7667cafd5a target/riscv: Replace DisasContext.w with DisasContext.ol
In preparation for RV128, consider more than just "w" for
operand size modification.  This will be used for the "d"
insns from RV128 as well.

Rename oper_len to get_olen to better match get_xlen.

Reviewed-by: LIU Zhiwei <zhiwei_liu@c-sky.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20211020031709.359469-10-richard.henderson@linaro.org
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2021-10-22 07:47:51 +10:00
Richard Henderson
4e97d459a0 target/riscv: Properly check SEW in amo_op
We're currently assuming SEW <= 3, and the "else" from
the SEW == 3 must be less.  Use a switch and explicitly
bound both SEW and SEQ for all cases.

Reviewed-by: LIU Zhiwei <zhiwei_liu@c-sky.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20211020031709.359469-8-richard.henderson@linaro.org
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2021-10-22 07:47:51 +10:00
Richard Henderson
fbb48032e4 target/riscv: Use REQUIRE_64BIT in amo_check64
Use the same REQUIRE_64BIT check that we use elsewhere,
rather than open-coding the use of is_32bit.

Reviewed-by: LIU Zhiwei <zhiwei_liu@c-sky.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20211020031709.359469-7-richard.henderson@linaro.org
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2021-10-22 07:47:51 +10:00
Philipp Tomsich
54c1760937 target/riscv: Fix orc.b implementation
The earlier implementation fell into a corner case for bytes that were
0x01, giving a wrong result (but not affecting our application test
cases for strings, as an ASCII value 0x01 is rare in those...).

This changes the algorithm to:
 1. Mask out the high-bit of each bytes (so that each byte is <= 127).
 2. Add 127 to each byte (i.e. if the low 7 bits are not 0, this will overflow
    into the highest bit of each byte).
 3. Bitwise-or the original value back in (to cover those cases where the
    source byte was exactly 128) to saturate the high-bit.
 4. Shift-and-mask (implemented as a mask-and-shift) to extract the MSB of
    each byte into its LSB.
 5. Multiply with 0xff to fan out the LSB to all bits of each byte.

Fixes: d7a4fcb034 ("target/riscv: Add orc.b instruction for Zbb, removing gorc/gorci")

Signed-off-by: Philipp Tomsich <philipp.tomsich@vrull.eu>
Reported-by: Vincent Palatin <vpalatin@rivosinc.com>
Tested-by: Vincent Palatin <vpalatin@rivosinc.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20211013184125.2010897-1-philipp.tomsich@vrull.eu
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2021-10-22 07:47:51 +10:00
Frank Chang
c672f19f32 target/riscv: Pass the same value to oprsz and maxsz for vmv.v.v
oprsz and maxsz are passed with the same value in commit: eee2d61e20.
However, vmv.v.v was missed in that commit and should pass the same
value as well in its tcg_gen_gvec_2_ptr() call.

Signed-off-by: Frank Chang <frank.chang@sifive.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20211007081803.1705656-1-frank.chang@sifive.com
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2021-10-22 07:47:51 +10:00
Richard Henderson
273b68b104 target/riscv: Remove exit_tb and lookup_and_goto_ptr
GDB single-stepping is now handled generically, which means
we don't need to do anything in the wrappers.

Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2021-10-15 16:39:14 -07:00
Richard Henderson
ea06a00652 target/riscv: Remove dead code after exception
We have already set DISAS_NORETURN in generate_exception,
which makes the exit_tb unreachable.

Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2021-10-15 16:39:14 -07:00
Philipp Tomsich
06dfa8a5c5 target/riscv: Add zext.h instructions to Zbb, removing pack/packu/packh
The 1.0.0 version of Zbb does not contain pack/packu/packh. However, a
zext.h instruction is provided (built on pack/packh from pre-0.93
draft-B) is available.

This commit adds zext.h and removes the pack* instructions.

Note that the encodings for zext.h are different between RV32 and
RV64, which is handled through REQUIRE_32BIT.

Signed-off-by: Philipp Tomsich <philipp.tomsich@vrull.eu>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20210911140016.834071-15-philipp.tomsich@vrull.eu
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2021-10-07 08:41:33 +10:00
Philipp Tomsich
a1095bdcb0 target/riscv: Add rev8 instruction, removing grev/grevi
The 1.0.0 version of Zbb does not contain grev/grevi.  Instead, a
rev8 instruction (equivalent to the rev8 pseudo-instruction built on
grevi from pre-0.93 draft-B) is available.

This commit adds the new rev8 instruction and removes grev/grevi.

Note that there is no W-form of this instruction (both a
sign-extending and zero-extending 32-bit version can easily be
synthesized by following rev8 with either a srai or srli instruction
on RV64) and that the opcode encodings for rev8 in RV32 and RV64 are
different.

Signed-off-by: Philipp Tomsich <philipp.tomsich@vrull.eu>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20210911140016.834071-14-philipp.tomsich@vrull.eu
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2021-10-07 08:41:33 +10:00
Philipp Tomsich
d7a4fcb034 target/riscv: Add orc.b instruction for Zbb, removing gorc/gorci
The 1.0.0 version of Zbb does not contain gorc/gorci.  Instead, a
orc.b instruction (equivalent to the orc.b pseudo-instruction built on
gorci from pre-0.93 draft-B) is available, mainly targeting
string-processing workloads.

This commit adds the new orc.b instruction and removed gorc/gorci.

Signed-off-by: Philipp Tomsich <philipp.tomsich@vrull.eu>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20210911140016.834071-12-philipp.tomsich@vrull.eu
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2021-10-07 08:41:33 +10:00
Philipp Tomsich
16c38f36f5 target/riscv: Reassign instructions to the Zbb-extension
This reassigns the instructions that are part of Zbb into it, with the
notable exceptions of the instructions (rev8, zext.w and orc.b) that
changed due to gorci, grevi and pack not being part of Zb[abcs].

Signed-off-by: Philipp Tomsich <philipp.tomsich@vrull.eu>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Acked-by: Bin Meng <bmeng.cn@gmail.com>
Message-id: 20210911140016.834071-11-philipp.tomsich@vrull.eu
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2021-10-07 08:33:21 +10:00
Philipp Tomsich
fd4b81a304 target/riscv: Add instructions of the Zbc-extension
The following instructions are part of Zbc:
 - clmul
 - clmulh
 - clmulr

Note that these instructions were already defined in the pre-0.93 and
the 0.93 draft-B proposals, but had not been omitted in the earlier
addition of draft-B to QEmu.

Signed-off-by: Philipp Tomsich <philipp.tomsich@vrull.eu>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20210911140016.834071-10-philipp.tomsich@vrull.eu
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2021-10-07 08:33:16 +10:00
Philipp Tomsich
f36a4a89aa target/riscv: Reassign instructions to the Zbs-extension
The following instructions are part of Zbs:
 - b{set,clr,ext,inv}
 - b{set,clr,ext,inv}i

Signed-off-by: Philipp Tomsich <philipp.tomsich@vrull.eu>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Acked-by: Bin Meng <bmeng.cn@gmail.com>
Message-id: 20210911140016.834071-9-philipp.tomsich@vrull.eu
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2021-10-07 08:33:13 +10:00
Philipp Tomsich
628d8c88c1 target/riscv: Remove shift-one instructions (proposed Zbo in pre-0.93 draft-B)
The Zb[abcs] ratification package does not include the proposed
shift-one instructions. There currently is no clear plan to whether
these (or variants of them) will be ratified as Zbo (or a different
extension) or what the timeframe for such a decision could be.

Signed-off-by: Philipp Tomsich <philipp.tomsich@vrull.eu>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Acked-by: Bin Meng <bmeng.cn@gmail.com>
Message-id: 20210911140016.834071-8-philipp.tomsich@vrull.eu
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2021-10-07 08:33:09 +10:00
Philipp Tomsich
dd98a74034 target/riscv: Remove the W-form instructions from Zbs
Zbs 1.0.0 (just as the 0.93 draft-B before) does not provide for W-form
instructions for Zbs (single-bit instructions).  Remove them.

Note that these instructions had already been removed for the 0.93
version of the draft-B extention and have not been present in the
binutils patches circulating in January 2021.

Signed-off-by: Philipp Tomsich <philipp.tomsich@vrull.eu>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Acked-by: Bin Meng <bmeng.cn@gmail.com>
Message-id: 20210911140016.834071-7-philipp.tomsich@vrull.eu
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2021-10-07 08:33:05 +10:00
Philipp Tomsich
bb4dc158e0 target/riscv: Reassign instructions to the Zba-extension
The following instructions are part of Zba:
 - add.uw (RV64 only)
 - sh[123]add (RV32 and RV64)
 - sh[123]add.uw (RV64-only)
 - slli.uw (RV64-only)

Signed-off-by: Philipp Tomsich <philipp.tomsich@vrull.eu>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Acked-by: Bin Meng <bmeng.cn@gmail.com>
Message-id: 20210911140016.834071-6-philipp.tomsich@vrull.eu
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2021-10-07 08:33:01 +10:00
Philipp Tomsich
45d1749c1c target/riscv: clwz must ignore high bits (use shift-left & changed logic)
Assume clzw being executed on a register that is not sign-extended, such
as for the following sequence that uses (1ULL << 63) | 392 as the operand
to clzw:
	bseti	a2, zero, 63
	addi	a2, a2, 392
	clzw    a3, a2
The correct result of clzw would be 23, but the current implementation
returns -32 (as it performs a 64bit clz, which results in 0 leading zero
bits, and then subtracts 32).

Fix this by changing the implementation to:
 1. shift the original register up by 32
 2. performs a target-length (64bit) clz
 3. return 32 if no bits are set

Marking this instruction as 'w-form' (i.e., setting ctx->w) would not
correctly model the behaviour, as the instruction should not perform
a zero-extensions on the input (after all, it is not a .uw instruction)
and the result is always in the range 0..32 (so neither a sign-extension
nor a zero-extension on the result will ever be needed).  Consequently,
we do not set ctx->w and mark the instruction as EXT_NONE.

Signed-off-by: Philipp Tomsich <philipp.tomsich@vrull.eu>
Reviewed-by: LIU Zhiwei<zhiwei_liu@c-sky.com>
Message-id: 20210911140016.834071-4-philipp.tomsich@vrull.eu
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2021-10-07 08:32:47 +10:00
Philipp Tomsich
e47fb6c1e9 target/riscv: fix clzw implementation to operate on arg1
The refactored gen_clzw() uses ret as its argument, instead of arg1.
Fix it.

Signed-off-by: Philipp Tomsich <philipp.tomsich@vrull.eu>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210911140016.834071-3-philipp.tomsich@vrull.eu
Fixes: 6090391505 ("target/riscv: Add DisasExtend to gen_unary")
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2021-10-07 08:32:39 +10:00
Philipp Tomsich
c5b4ee5bb7 target/riscv: Introduce temporary in gen_add_uw()
Following the recent changes in translate.c, gen_add_uw() causes
failures on CF3 and SPEC2017 due to the reuse of arg1.  Fix these
regressions by introducing a temporary.

Signed-off-by: Philipp Tomsich <philipp.tomsich@vrull.eu>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210911140016.834071-2-philipp.tomsich@vrull.eu
Fixes: 191d1dafae ("target/riscv: Add DisasExtend to gen_arith*")
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2021-10-07 08:32:21 +10:00
Richard Henderson
8e034ae44d target/riscv: Use {get,dest}_gpr for RVV
Remove gen_get_gpr, as the function becomes unused.

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20210823195529.560295-25-richard.henderson@linaro.org
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2021-09-01 11:59:12 +10:00
Richard Henderson
f33960df5b target/riscv: Tidy trans_rvh.c.inc
Exit early if check_access fails.
Split out do_hlv, do_hsv, do_hlvx subroutines.
Use dest_gpr, get_gpr in the new subroutines.

Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20210823195529.560295-24-richard.henderson@linaro.org
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2021-09-01 11:59:12 +10:00
Richard Henderson
7976837f9a target/riscv: Use {get,dest}_gpr for RVD
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20210823195529.560295-23-richard.henderson@linaro.org
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2021-09-01 11:59:12 +10:00
Richard Henderson
75234a2843 target/riscv: Use {get,dest}_gpr for RVF
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20210823195529.560295-22-richard.henderson@linaro.org
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2021-09-01 11:59:12 +10:00
Richard Henderson
6922eee6ac target/riscv: Use gen_shift_imm_fn for slli_uw
Always use tcg_gen_deposit_z_tl; the special case for
shamt >= 32 is handled there.

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20210823195529.560295-21-richard.henderson@linaro.org
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2021-09-01 11:59:12 +10:00
Richard Henderson
cce762a75e target/riscv: Use {get,dest}_gpr for RVA
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20210823195529.560295-20-richard.henderson@linaro.org
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2021-09-01 11:59:12 +10:00
Richard Henderson
a974879b45 target/riscv: Reorg csr instructions
Introduce csrr and csrw helpers, for read-only and write-only insns.

Note that we do not properly implement this in riscv_csrrw, in that
we cannot distinguish true read-only (rs1 == 0) from any other zero
write_mask another source register -- this should still raise an
exception for read-only registers.

Only issue gen_io_start for CF_USE_ICOUNT.
Use ctx->zero for csrrc.
Use get_gpr and dest_gpr.

Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20210823195529.560295-19-richard.henderson@linaro.org
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2021-09-01 11:59:12 +10:00
Richard Henderson
6ecf39e2dd target/riscv: Use {get, dest}_gpr for integer load/store
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210823195529.560295-16-richard.henderson@linaro.org
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2021-09-01 11:59:12 +10:00
Richard Henderson
9b21b64345 target/riscv: Use get_gpr in branches
Narrow the scope of t0 in trans_jalr.

Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210823195529.560295-15-richard.henderson@linaro.org
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2021-09-01 11:59:12 +10:00
Richard Henderson
23c1088689 target/riscv: Use extracts for sraiw and srliw
These operations can be done in one instruction on some hosts.

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20210823195529.560295-14-richard.henderson@linaro.org
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2021-09-01 11:59:12 +10:00
Richard Henderson
89c883091f target/riscv: Use DisasExtend in shift operations
These operations are greatly simplified by ctx->w, which allows
us to fold gen_shiftw into gen_shift.  Split gen_shifti into
gen_shift_imm_{fn,tl} like we do for gen_arith_imm_{fn,tl}.

Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210823195529.560295-13-richard.henderson@linaro.org
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2021-09-01 11:59:12 +10:00
Richard Henderson
6090391505 target/riscv: Add DisasExtend to gen_unary
Use ctx->w for ctpopw, which is the only one that can
re-use the generic algorithm for the narrow operation.

Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210823195529.560295-12-richard.henderson@linaro.org
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2021-09-01 11:59:12 +10:00
Richard Henderson
f84ed8c2df target/riscv: Move gen_* helpers for RVB
Move these helpers near their use by the trans_*
functions within insn_trans/trans_rvb.c.inc.

Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210823195529.560295-11-richard.henderson@linaro.org
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2021-09-01 11:59:12 +10:00
Richard Henderson
b66a0585f0 target/riscv: Move gen_* helpers for RVM
Move these helpers near their use by the trans_*
functions within insn_trans/trans_rvm.c.inc.

Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210823195529.560295-10-richard.henderson@linaro.org
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2021-09-01 11:59:12 +10:00
Richard Henderson
8a1b4917c5 target/riscv: Use gen_arith for mulh and mulhu
Split out gen_mulh and gen_mulhu and use the common helper.

Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210823195529.560295-9-richard.henderson@linaro.org
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2021-09-01 11:59:12 +10:00
Richard Henderson
afbbec8201 target/riscv: Remove gen_arith_div*
Use ctx->w and the enhanced gen_arith function.

Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210823195529.560295-8-richard.henderson@linaro.org
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2021-09-01 11:59:12 +10:00
Richard Henderson
191d1dafae target/riscv: Add DisasExtend to gen_arith*
Most arithmetic does not require extending the inputs.
Exceptions include division, comparison and minmax.

Begin using ctx->w, which allows elimination of gen_addw,
gen_subw, gen_mulw.

Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210823195529.560295-7-richard.henderson@linaro.org
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2021-09-01 11:59:12 +10:00
Richard Henderson
867c81968a target/riscv: Add DisasContext to gen_get_gpr, gen_set_gpr
We will require the context to handle RV64 word operations.

Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210823195529.560295-5-richard.henderson@linaro.org
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2021-09-01 11:59:12 +10:00
Richard Henderson
05b80ed0a1 target/riscv: Use tcg_constant_*
Replace uses of tcg_const_* with the allocate and free close together.

Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210823195529.560295-2-richard.henderson@linaro.org
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2021-09-01 11:59:12 +10:00
Kito Cheng
3a4a43e4e2 target/riscv: rvb: add/shift with prefix zero-extend
Signed-off-by: Kito Cheng <kito.cheng@sifive.com>
Signed-off-by: Frank Chang <frank.chang@sifive.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210505160620.15723-16-frank.chang@sifive.com
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2021-06-08 09:59:45 +10:00
Kito Cheng
920a1f9955 target/riscv: rvb: address calculation
Signed-off-by: Kito Cheng <kito.cheng@sifive.com>
Signed-off-by: Frank Chang <frank.chang@sifive.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210505160620.15723-15-frank.chang@sifive.com
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2021-06-08 09:59:45 +10:00
Frank Chang
c24f0422fb target/riscv: rvb: generalized or-combine
Signed-off-by: Frank Chang <frank.chang@sifive.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210505160620.15723-14-frank.chang@sifive.com
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2021-06-08 09:59:45 +10:00
Frank Chang
831ec7f3d1 target/riscv: rvb: generalized reverse
Signed-off-by: Frank Chang <frank.chang@sifive.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210505160620.15723-13-frank.chang@sifive.com
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2021-06-08 09:59:45 +10:00
Kito Cheng
e58529a8d0 target/riscv: rvb: rotate (left/right)
Signed-off-by: Kito Cheng <kito.cheng@sifive.com>
Signed-off-by: Frank Chang <frank.chang@sifive.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20210505160620.15723-12-frank.chang@sifive.com
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2021-06-08 09:59:45 +10:00
Kito Cheng
91d8fc6768 target/riscv: rvb: shift ones
Signed-off-by: Kito Cheng <kito.cheng@sifive.com>
Signed-off-by: Frank Chang <frank.chang@sifive.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20210505160620.15723-11-frank.chang@sifive.com
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2021-06-08 09:59:45 +10:00
Frank Chang
23cd17773b target/riscv: rvb: single-bit instructions
Signed-off-by: Kito Cheng <kito.cheng@sifive.com>
Signed-off-by: Frank Chang <frank.chang@sifive.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20210505160620.15723-10-frank.chang@sifive.com
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2021-06-08 09:59:45 +10:00
Frank Chang
981d3568df target/riscv: add gen_shifti() and gen_shiftiw() helper functions
Add gen_shifti() and gen_shiftiw() helper functions to reuse the same
interfaces for immediate shift instructions.

Signed-off-by: Frank Chang <frank.chang@sifive.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20210505160620.15723-9-frank.chang@sifive.com
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2021-06-08 09:59:44 +10:00
Kito Cheng
2a81973829 target/riscv: rvb: sign-extend instructions
Signed-off-by: Kito Cheng <kito.cheng@sifive.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Frank Chang <frank.chang@sifive.com>
Message-id: 20210505160620.15723-8-frank.chang@sifive.com
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2021-06-08 09:59:44 +10:00
Kito Cheng
82655d8115 target/riscv: rvb: min/max instructions
Signed-off-by: Kito Cheng <kito.cheng@sifive.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Frank Chang <frank.chang@sifive.com>
Message-id: 20210505160620.15723-7-frank.chang@sifive.com
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2021-06-08 09:59:44 +10:00
Kito Cheng
6ef5843182 target/riscv: rvb: pack two words into one register
Signed-off-by: Kito Cheng <kito.cheng@sifive.com>
Signed-off-by: Frank Chang <frank.chang@sifive.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20210505160620.15723-6-frank.chang@sifive.com
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2021-06-08 09:59:44 +10:00
Kito Cheng
0bcdb686e5 target/riscv: rvb: logic-with-negate
Signed-off-by: Kito Cheng <kito.cheng@sifive.com>
Signed-off-by: Frank Chang <frank.chang@sifive.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20210505160620.15723-5-frank.chang@sifive.com
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2021-06-08 09:59:44 +10:00
Frank Chang
1e16310ca1 target/riscv: rvb: count bits set
Signed-off-by: Kito Cheng <kito.cheng@sifive.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Frank Chang <frank.chang@sifive.com>
Message-id: 20210505160620.15723-4-frank.chang@sifive.com
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2021-06-08 09:59:44 +10:00
Kito Cheng
438240185a target/riscv: rvb: count leading/trailing zeros
Signed-off-by: Kito Cheng <kito.cheng@sifive.com>
Signed-off-by: Frank Chang <frank.chang@sifive.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20210505160620.15723-3-frank.chang@sifive.com
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2021-06-08 09:59:43 +10:00
LIU Zhiwei
eee2d61e20 target/riscv: Pass the same value to oprsz and maxsz.
Since commit e2e7168a21, if oprsz
is still zero(as we don't use this field), simd_desc will trigger an
assert.

Besides, tcg_gen_gvec_*_ptr calls simd_desc in it's implementation.
Here we pass the value to maxsz and oprsz to bypass the assert.

Signed-off-by: LIU Zhiwei <zhiwei_liu@c-sky.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210521054816.1784297-1-zhiwei_liu@c-sky.com
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2021-06-08 09:59:43 +10:00
Alistair Francis
6baba30ad0 target/riscv: Consolidate RV32/64 16-bit instructions
This patch removes the insn16-32.decode and insn16-64.decode decode
files and consolidates the instructions into the general RISC-V
insn16.decode decode tree.

This means that all of the instructions are avaliable in both the 32-bit
and 64-bit builds. This also means that we run a check to ensure we are
running a 64-bit softmmu before we execute the 64-bit only instructions.
This allows us to include the 32-bit instructions in the 64-bit build,
while also ensuring that 32-bit only software can not execute the
instructions.

Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 01e2b0efeae311adc7ebf133c2cde6a7a37224d7.1619234854.git.alistair.francis@wdc.com
2021-05-11 20:02:07 +10:00
Alistair Francis
daf866b606 target/riscv: Consolidate RV32/64 32-bit instructions
This patch removes the insn32-64.decode decode file and consolidates the
instructions into the general RISC-V insn32.decode decode tree.

This means that all of the instructions are avaliable in both the 32-bit
and 64-bit builds. This also means that we run a check to ensure we are
running a 64-bit softmmu before we execute the 64-bit only instructions.
This allows us to include the 32-bit instructions in the 64-bit build,
while also ensuring that 32-bit only software can not execute the
instructions.

Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: db709360e2be47d2f9c6483ab973fe4791aefa77.1619234854.git.alistair.francis@wdc.com
2021-05-11 20:02:07 +10:00
Keith Packard
a10b9d93ec riscv: Add semihosting support
Adapt the arm semihosting support code for RISCV. This implementation
is based on the standard for RISC-V semihosting version 0.2 as
documented in

   https://github.com/riscv/riscv-semihosting-spec/releases/tag/0.2

Signed-off-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20210107170717.2098982-6-keithp@keithp.com>
Message-Id: <20210108224256.2321-17-alex.bennee@linaro.org>
2021-01-18 10:05:06 +00:00
Alistair Francis
7687537ab0 target/riscv: Split the Hypervisor execute load helpers
Split the hypervisor execute load functions into two seperate functions.
This avoids us having to pass the memop to the C helper functions.

Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 5b1550f0faa3c435cc77f3c1ae811dea98ab9e36.1604464950.git.alistair.francis@wdc.com
2020-11-09 15:09:00 -08:00
Alistair Francis
743077b35b target/riscv: Remove the hyp load and store functions
Remove the special Virtulisation load and store functions and just use
the standard tcg tcg_gen_qemu_ld_tl() and tcg_gen_qemu_st_tl() functions
instead.

As part of this change we ensure we still run an access check to make
sure we can perform the operations.

Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 189ac3e53ef2854824d18aad7074c6649f17de2c.1604464950.git.alistair.francis@wdc.com
2020-11-09 15:08:57 -08:00
Alistair Francis
e39a8320b0 target/riscv: Support the Virtual Instruction fault
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 4c744dce9b0b057cbb5cc0f4d4ac75cda682a8af.1597259519.git.alistair.francis@wdc.com
Message-Id: <4c744dce9b0b057cbb5cc0f4d4ac75cda682a8af.1597259519.git.alistair.francis@wdc.com>
2020-08-25 09:11:36 -07:00
Alistair Francis
8c5362acb5 target/riscv: Allow generating hlv/hlvx/hsv instructions
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 477c864312280ea55a98dc84cb01d826751b6c14.1597259519.git.alistair.francis@wdc.com
Message-Id: <477c864312280ea55a98dc84cb01d826751b6c14.1597259519.git.alistair.francis@wdc.com>
2020-08-25 09:11:35 -07:00
LIU Zhiwei
ec80f87459 target/riscv: check before allocating TCG temps
Signed-off-by: LIU Zhiwei <zhiwei_liu@c-sky.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20200626205917.4545-5-zhiwei_liu@c-sky.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20200724002807.441147-8-richard.henderson@linaro.org>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2020-08-21 22:37:55 -07:00
LIU Zhiwei
6e0229e638 target/riscv: Clean up fmv.w.x
Use tcg_gen_extu_tl_i64 to avoid the ifdef.

Signed-off-by: LIU Zhiwei <zhiwei_liu@c-sky.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20200626205917.4545-7-zhiwei_liu@c-sky.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20200724002807.441147-7-richard.henderson@linaro.org>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2020-08-21 22:37:55 -07:00
Richard Henderson
ffe70e4dfc target/riscv: Check nanboxed inputs in trans_rvf.inc.c
If a 32-bit input is not properly nanboxed, then the input is replaced
with the default qnan.  The only inline expansion is for the sign-changing
set of instructions: FSGNJ.S, FSGNJX.S, FSGNJN.S.

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: LIU Zhiwei <zhiwei_liu@c-sky.com>
Message-Id: <20200724002807.441147-6-richard.henderson@linaro.org>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2020-08-21 22:37:55 -07:00
Richard Henderson
40eaa47361 target/riscv: Generate nanboxed results from trans_rvf.inc.c
Make sure that all results from inline single-precision scalar
operations are properly nan-boxed to 64-bits.

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: LIU Zhiwei <zhiwei_liu@c-sky.com>
Message-Id: <20200724002807.441147-4-richard.henderson@linaro.org>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2020-08-21 22:37:55 -07:00
Richard Henderson
d36a86d01e target/riscv: Generalize gen_nanbox_fpr to gen_nanbox_s
Do not depend on the RVD extension, take input and output via
TCGv_i64 instead of fpu regno.  Move the function to translate.c
so that it can be used in multiple trans_*.inc.c files.

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: LIU Zhiwei <zhiwei_liu@c-sky.com>
Message-Id: <20200724002807.441147-3-richard.henderson@linaro.org>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2020-08-21 22:37:55 -07:00
Paolo Bonzini
139c1837db meson: rename included C source files to .c.inc
With Makefiles that have automatically generated dependencies, you
generated includes are set as dependencies of the Makefile, so that they
are built before everything else and they are available when first
building the .c files.

Alternatively you can use a fine-grained dependency, e.g.

        target/arm/translate.o: target/arm/decode-neon-shared.inc.c

With Meson you have only one choice and it is a third option, namely
"build at the beginning of the corresponding target"; the way you
express it is to list the includes in the sources of that target.

The problem is that Meson decides if something is a source vs. a
generated include by looking at the extension: '.c', '.cc', '.m', '.C'
are sources, while everything else is considered an include---including
'.inc.c'.

Use '.c.inc' to avoid this, as it is consistent with our other convention
of using '.rst.inc' for included reStructuredText files.  The editorconfig
file is adjusted.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-08-21 06:18:30 -04:00
LIU Zhiwei
3e09396e36 target/riscv: fix vector index load/store constraints
Although not explicitly specified that the the destination
vector register groups cannot overlap the source vector register group,
it is still necessary.

And this constraint has been added to the v0.8 spec.

Signed-off-by: LIU Zhiwei <zhiwei_liu@c-sky.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20200721133742.2298-2-zhiwei_liu@c-sky.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2020-07-22 09:39:46 -07:00
LIU Zhiwei
eabfeb0cb9 target/riscv: Quiet Coverity complains about vamo*
Signed-off-by: LIU Zhiwei <zhiwei_liu@c-sky.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20200721133742.2298-1-zhiwei_liu@c-sky.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2020-07-22 09:39:46 -07:00
Frank Chang
a69f97c111 target/riscv: fix return value of do_opivx_widen()
do_opivx_widen() should return false if check function returns false.

Signed-off-by: Frank Chang <frank.chang@sifive.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20200710104920.13550-4-frank.chang@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2020-07-13 17:25:37 -07:00
Frank Chang
1989205c4e target/riscv: correct the gvec IR called in gen_vec_rsub16_i64()
Signed-off-by: Frank Chang <frank.chang@sifive.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20200710104920.13550-3-frank.chang@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2020-07-13 17:25:37 -07:00
Frank Chang
7acafcfa84 target/riscv: fix rsub gvec tcg_assert_listed_vecop assertion
gvec should provide vecop_list to avoid:
"tcg_tcg_assert_listed_vecop: code should not be reached bug" assertion.

Signed-off-by: Frank Chang <frank.chang@sifive.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20200710104920.13550-2-frank.chang@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2020-07-13 17:25:37 -07:00
LIU Zhiwei
31bf42a26c target/riscv: vector compress instruction
Signed-off-by: LIU Zhiwei <zhiwei_liu@c-sky.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20200701152549.1218-61-zhiwei_liu@c-sky.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2020-07-02 09:19:34 -07:00
LIU Zhiwei
e4b83d5c09 target/riscv: vector register gather instruction
Signed-off-by: LIU Zhiwei <zhiwei_liu@c-sky.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20200701152549.1218-60-zhiwei_liu@c-sky.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2020-07-02 09:19:33 -07:00
LIU Zhiwei
ec17e03688 target/riscv: vector slide instructions
Signed-off-by: LIU Zhiwei <zhiwei_liu@c-sky.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20200701152549.1218-59-zhiwei_liu@c-sky.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2020-07-02 09:19:33 -07:00
LIU Zhiwei
2843420a56 target/riscv: floating-point scalar move instructions
Signed-off-by: LIU Zhiwei <zhiwei_liu@c-sky.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20200701152549.1218-58-zhiwei_liu@c-sky.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2020-07-02 09:19:33 -07:00
LIU Zhiwei
9fc08be626 target/riscv: integer scalar move instruction
Signed-off-by: LIU Zhiwei <zhiwei_liu@c-sky.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20200701152549.1218-57-zhiwei_liu@c-sky.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2020-07-02 09:19:33 -07:00
LIU Zhiwei
90355f391d target/riscv: integer extract instruction
Signed-off-by: LIU Zhiwei <zhiwei_liu@c-sky.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20200701152549.1218-56-zhiwei_liu@c-sky.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2020-07-02 09:19:33 -07:00
LIU Zhiwei
126bec3f6f target/riscv: vector element index instruction
Signed-off-by: LIU Zhiwei <zhiwei_liu@c-sky.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20200701152549.1218-55-zhiwei_liu@c-sky.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2020-07-02 09:19:33 -07:00
LIU Zhiwei
78d90cfe85 target/riscv: vector iota instruction
Signed-off-by: LIU Zhiwei <zhiwei_liu@c-sky.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20200701152549.1218-54-zhiwei_liu@c-sky.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2020-07-02 09:19:33 -07:00
LIU Zhiwei
81fbf7daf2 target/riscv: set-X-first mask bit
Signed-off-by: LIU Zhiwei <zhiwei_liu@c-sky.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20200701152549.1218-53-zhiwei_liu@c-sky.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2020-07-02 09:19:33 -07:00
LIU Zhiwei
0db67e1c0c target/riscv: vmfirst find-first-set mask bit
Signed-off-by: LIU Zhiwei <zhiwei_liu@c-sky.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20200701152549.1218-52-zhiwei_liu@c-sky.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2020-07-02 09:19:33 -07:00
LIU Zhiwei
2e88f551df target/riscv: vector mask population count vmpopc
Signed-off-by: LIU Zhiwei <zhiwei_liu@c-sky.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20200701152549.1218-51-zhiwei_liu@c-sky.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2020-07-02 09:19:33 -07:00
LIU Zhiwei
c21f34aebf target/riscv: vector mask-register logical instructions
Signed-off-by: LIU Zhiwei <zhiwei_liu@c-sky.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20200701152549.1218-50-zhiwei_liu@c-sky.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2020-07-02 09:19:33 -07:00
LIU Zhiwei
696b0c260a target/riscv: vector widening floating-point reduction instructions
Signed-off-by: LIU Zhiwei <zhiwei_liu@c-sky.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20200701152549.1218-49-zhiwei_liu@c-sky.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2020-07-02 09:19:33 -07:00
LIU Zhiwei
523547f19e target/riscv: vector single-width floating-point reduction instructions
Signed-off-by: LIU Zhiwei <zhiwei_liu@c-sky.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20200701152549.1218-48-zhiwei_liu@c-sky.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2020-07-02 09:19:33 -07:00
LIU Zhiwei
bba718200b target/riscv: vector wideing integer reduction instructions
Signed-off-by: LIU Zhiwei <zhiwei_liu@c-sky.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20200701152549.1218-47-zhiwei_liu@c-sky.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2020-07-02 09:19:33 -07:00
LIU Zhiwei
fe5c9ab1fc target/riscv: vector single-width integer reduction instructions
Signed-off-by: LIU Zhiwei <zhiwei_liu@c-sky.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20200701152549.1218-46-zhiwei_liu@c-sky.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2020-07-02 09:19:33 -07:00
LIU Zhiwei
878d406ec2 target/riscv: narrowing floating-point/integer type-convert instructions
Signed-off-by: LIU Zhiwei <zhiwei_liu@c-sky.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20200701152549.1218-45-zhiwei_liu@c-sky.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2020-07-02 09:19:33 -07:00
LIU Zhiwei
4514b7b123 target/riscv: widening floating-point/integer type-convert instructions
Signed-off-by: LIU Zhiwei <zhiwei_liu@c-sky.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20200701152549.1218-44-zhiwei_liu@c-sky.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2020-07-02 09:19:33 -07:00
LIU Zhiwei
9210097326 target/riscv: vector floating-point/integer type-convert instructions
Signed-off-by: LIU Zhiwei <zhiwei_liu@c-sky.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20200701152549.1218-43-zhiwei_liu@c-sky.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2020-07-02 09:19:33 -07:00
LIU Zhiwei
64ab584697 target/riscv: vector floating-point merge instructions
Signed-off-by: LIU Zhiwei <zhiwei_liu@c-sky.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20200701152549.1218-42-zhiwei_liu@c-sky.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2020-07-02 09:19:33 -07:00
LIU Zhiwei
121ddbb36f target/riscv: vector floating-point classify instructions
Signed-off-by: LIU Zhiwei <zhiwei_liu@c-sky.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20200701152549.1218-41-zhiwei_liu@c-sky.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2020-07-02 09:19:33 -07:00
LIU Zhiwei
2a68e9e568 target/riscv: vector floating-point compare instructions
Signed-off-by: LIU Zhiwei <zhiwei_liu@c-sky.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20200701152549.1218-40-zhiwei_liu@c-sky.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2020-07-02 09:19:33 -07:00
LIU Zhiwei
1d426b81f7 target/riscv: vector floating-point sign-injection instructions
Signed-off-by: LIU Zhiwei <zhiwei_liu@c-sky.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20200701152549.1218-39-zhiwei_liu@c-sky.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2020-07-02 09:19:33 -07:00
LIU Zhiwei
230b53ddd7 target/riscv: vector floating-point min/max instructions
Signed-off-by: LIU Zhiwei <zhiwei_liu@c-sky.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20200701152549.1218-38-zhiwei_liu@c-sky.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2020-07-02 09:19:33 -07:00
LIU Zhiwei
d9e4ce72a5 target/riscv: vector floating-point square-root instruction
Signed-off-by: LIU Zhiwei <zhiwei_liu@c-sky.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20200701152549.1218-37-zhiwei_liu@c-sky.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2020-07-02 09:19:33 -07:00
LIU Zhiwei
0dd509594f target/riscv: vector widening floating-point fused multiply-add instructions
Signed-off-by: LIU Zhiwei <zhiwei_liu@c-sky.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20200701152549.1218-36-zhiwei_liu@c-sky.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2020-07-02 09:19:33 -07:00
LIU Zhiwei
4aa5a8fed4 target/riscv: vector single-width floating-point fused multiply-add instructions
Signed-off-by: LIU Zhiwei <zhiwei_liu@c-sky.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20200701152549.1218-35-zhiwei_liu@c-sky.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2020-07-02 09:19:33 -07:00
LIU Zhiwei
f7c7b7cd29 target/riscv: vector widening floating-point multiply
Signed-off-by: LIU Zhiwei <zhiwei_liu@c-sky.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20200701152549.1218-34-zhiwei_liu@c-sky.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2020-07-02 09:19:33 -07:00
LIU Zhiwei
0e0057cbe2 target/riscv: vector single-width floating-point multiply/divide instructions
Signed-off-by: LIU Zhiwei <zhiwei_liu@c-sky.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20200701152549.1218-33-zhiwei_liu@c-sky.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2020-07-02 09:19:33 -07:00
LIU Zhiwei
eeffab2ec1 target/riscv: vector widening floating-point add/subtract instructions
Signed-off-by: LIU Zhiwei <zhiwei_liu@c-sky.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20200701152549.1218-32-zhiwei_liu@c-sky.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2020-07-02 09:19:33 -07:00
LIU Zhiwei
ce2a0343f4 target/riscv: vector single-width floating-point add/subtract instructions
Signed-off-by: LIU Zhiwei <zhiwei_liu@c-sky.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20200701152549.1218-31-zhiwei_liu@c-sky.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2020-07-02 09:19:33 -07:00
LIU Zhiwei
9ff3d28739 target/riscv: vector narrowing fixed-point clip instructions
Signed-off-by: LIU Zhiwei <zhiwei_liu@c-sky.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20200701152549.1218-30-zhiwei_liu@c-sky.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2020-07-02 09:19:33 -07:00
LIU Zhiwei
04a614062d target/riscv: vector single-width scaling shift instructions
Signed-off-by: LIU Zhiwei <zhiwei_liu@c-sky.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20200701152549.1218-29-zhiwei_liu@c-sky.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2020-07-02 09:19:33 -07:00
LIU Zhiwei
0a1eaf0036 target/riscv: vector widening saturating scaled multiply-add
Signed-off-by: LIU Zhiwei <zhiwei_liu@c-sky.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20200701152549.1218-28-zhiwei_liu@c-sky.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2020-07-02 09:19:33 -07:00
LIU Zhiwei
9f0ff9e514 target/riscv: vector single-width fractional multiply with rounding and saturation
Signed-off-by: LIU Zhiwei <zhiwei_liu@c-sky.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20200701152549.1218-27-zhiwei_liu@c-sky.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2020-07-02 09:19:33 -07:00
LIU Zhiwei
b7aee48192 target/riscv: vector single-width averaging add and subtract
Signed-off-by: LIU Zhiwei <zhiwei_liu@c-sky.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20200701152549.1218-26-zhiwei_liu@c-sky.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2020-07-02 09:19:33 -07:00
LIU Zhiwei
eb2650e35e target/riscv: vector single-width saturating add and subtract
Signed-off-by: LIU Zhiwei <zhiwei_liu@c-sky.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20200701152549.1218-25-zhiwei_liu@c-sky.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2020-07-02 09:19:33 -07:00
LIU Zhiwei
f020a7a145 target/riscv: vector integer merge and move instructions
Signed-off-by: LIU Zhiwei <zhiwei_liu@c-sky.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20200701152549.1218-24-zhiwei_liu@c-sky.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2020-07-02 09:19:33 -07:00
LIU Zhiwei
2b587b3350 target/riscv: vector widening integer multiply-add instructions
Signed-off-by: LIU Zhiwei <zhiwei_liu@c-sky.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20200701152549.1218-23-zhiwei_liu@c-sky.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2020-07-02 09:19:33 -07:00
LIU Zhiwei
54df813a33 target/riscv: vector single-width integer multiply-add instructions
Signed-off-by: LIU Zhiwei <zhiwei_liu@c-sky.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20200701152549.1218-22-zhiwei_liu@c-sky.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2020-07-02 09:19:33 -07:00
LIU Zhiwei
97b1cba399 target/riscv: vector widening integer multiply instructions
Signed-off-by: LIU Zhiwei <zhiwei_liu@c-sky.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20200701152549.1218-21-zhiwei_liu@c-sky.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2020-07-02 09:19:33 -07:00
LIU Zhiwei
85e6658cfe target/riscv: vector integer divide instructions
Signed-off-by: LIU Zhiwei <zhiwei_liu@c-sky.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20200701152549.1218-20-zhiwei_liu@c-sky.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2020-07-02 09:19:33 -07:00
LIU Zhiwei
958b85f368 target/riscv: vector single-width integer multiply instructions
Signed-off-by: LIU Zhiwei <zhiwei_liu@c-sky.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20200701152549.1218-19-zhiwei_liu@c-sky.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2020-07-02 09:19:33 -07:00
LIU Zhiwei
558fa7797c target/riscv: vector integer min/max instructions
Signed-off-by: LIU Zhiwei <zhiwei_liu@c-sky.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20200701152549.1218-18-zhiwei_liu@c-sky.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2020-07-02 09:19:33 -07:00
LIU Zhiwei
1366fc79be target/riscv: vector integer comparison instructions
Signed-off-by: LIU Zhiwei <zhiwei_liu@c-sky.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20200701152549.1218-17-zhiwei_liu@c-sky.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2020-07-02 09:19:33 -07:00
LIU Zhiwei
7689b028ca target/riscv: vector narrowing integer right shift instructions
Signed-off-by: LIU Zhiwei <zhiwei_liu@c-sky.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20200701152549.1218-16-zhiwei_liu@c-sky.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2020-07-02 09:19:33 -07:00
LIU Zhiwei
3277d955d2 target/riscv: vector single-width bit shift instructions
Signed-off-by: LIU Zhiwei <zhiwei_liu@c-sky.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20200701152549.1218-15-zhiwei_liu@c-sky.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2020-07-02 09:19:33 -07:00
LIU Zhiwei
d3842924cf target/riscv: vector bitwise logical instructions
Signed-off-by: LIU Zhiwei <zhiwei_liu@c-sky.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20200701152549.1218-14-zhiwei_liu@c-sky.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2020-07-02 09:19:33 -07:00
LIU Zhiwei
3a6f8f68ad target/riscv: vector integer add-with-carry / subtract-with-borrow instructions
Signed-off-by: LIU Zhiwei <zhiwei_liu@c-sky.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20200701152549.1218-13-zhiwei_liu@c-sky.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2020-07-02 09:19:33 -07:00
LIU Zhiwei
8fcdf77630 target/riscv: vector widening integer add and subtract
Signed-off-by: LIU Zhiwei <zhiwei_liu@c-sky.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20200701152549.1218-12-zhiwei_liu@c-sky.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2020-07-02 09:19:33 -07:00
LIU Zhiwei
43740e3a3b target/riscv: vector single-width integer add and subtract
Signed-off-by: LIU Zhiwei <zhiwei_liu@c-sky.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20200701152549.1218-11-zhiwei_liu@c-sky.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2020-07-02 09:19:33 -07:00
LIU Zhiwei
268fcca66b target/riscv: add vector amo operations
Vector AMOs operate as if aq and rl bits were zero on each element
with regard to ordering relative to other instructions in the same hart.
Vector AMOs provide no ordering guarantee between element operations
in the same vector AMO instruction

Signed-off-by: LIU Zhiwei <zhiwei_liu@c-sky.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20200701152549.1218-10-zhiwei_liu@c-sky.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2020-07-02 09:19:33 -07:00
LIU Zhiwei
022b4ecf77 target/riscv: add fault-only-first unit stride load
The unit-stride fault-only-fault load instructions are used to
vectorize loops with data-dependent exit conditions(while loops).
These instructions execute as a regular load except that they
will only take a trap on element 0.

Signed-off-by: LIU Zhiwei <zhiwei_liu@c-sky.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20200701152549.1218-9-zhiwei_liu@c-sky.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2020-07-02 09:19:33 -07:00
LIU Zhiwei
f732560e35 target/riscv: add vector index load and store instructions
Vector indexed operations add the contents of each element of the
vector offset operand specified by vs2 to the base effective address
to give the effective address of each element.

Signed-off-by: LIU Zhiwei <zhiwei_liu@c-sky.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20200701152549.1218-8-zhiwei_liu@c-sky.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2020-07-02 09:19:33 -07:00
LIU Zhiwei
751538d5da target/riscv: add vector stride load and store instructions
Vector strided operations access the first memory element at the base address,
and then access subsequent elements at address increments given by the byte
offset contained in the x register specified by rs2.

Vector unit-stride operations access elements stored contiguously in memory
starting from the base effective address. It can been seen as a special
case of strided operations.

Signed-off-by: LIU Zhiwei <zhiwei_liu@c-sky.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20200701152549.1218-7-zhiwei_liu@c-sky.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2020-07-02 09:19:32 -07:00