* stefanha/trivial-patches:
Makefile: Remove generated headers on clean
Makefile: Exclude tests/Makefile in unconfigured tree
lm32: Fix mixup of uint32 and uint32_t
tests: Silence gtester in Makefile
qemu-tool: Fix mixup of int64 and int64_t
* pmaydell/arm-devs.for-upstream:
arm: make the number of GIC interrupts configurable
hw/lan9118: Add save/load support
arm: Remove incorrect comment in arm_timer
vexpress, realview: Add (dummy) L2 cache controller
* kraxel/usb.37:
usb-redir: Improve some debugging messages
usb-redir: Try to keep our buffer size near the target size
usb-redir: Pre-fill our isoc input buffer before sending pkts to the host
usb-redir: Dynamically adjust iso buffering size based on ep interval
usb-redir: Clear iso / irq error when stopping the stream
usb: link packets to endpoints not devices
usb: add max_packet_size to USBEndpoint
usb/debug: add usb_ep_dump
usb-desc: USBEndpoint support
usb: add ifnum to USBEndpoint
usb: add USBEndpoint
xhci: Initial xHCI implementation
usb: add audio device model
usb-desc: audio endpoint support
usb: track altsetting in USBDevice
usb: track configuration and interface count in USBDevice.
usb-host: rip out legacy procfs support
Make the basic in-kernel irqchip support selectable via
-machine ...,kernel_irqchip=on. Leave it off by default until it can
fully replace user space models.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
This introduces the KVM-accelerated IOAPIC model 'kvm-ioapic' and
extends the IRQ routing setup by the 0->2 redirection when needed.
The kvm-ioapic model has a property that allows to define its GSI base
for injecting interrupts into the kernel model. This will allow to
disentangle PIC and IOAPIC pins for chipsets that support more
sophisticated IRQ routes than the PIIX3. So far the base is kept at 0,
i.e. PIC and IOAPIC share pins 0..15.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Introduce the alternative 'kvm-i8259' device model that exploits KVM
in-kernel acceleration.
The PIIX3 initialization code is furthermore extended by KVM specific
IRQ route setup. GSI injection differs in KVM mode from the user space
model. As we can dispatch ISA-range IRQs to both IOAPIC and PIC inside
the kernel, we do not need to inject them separately. This is reflected
by a KVM-specific GSI handler.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
This introduces the alternative APIC device which makes use of KVM's
in-kernel device model. External NMI injection via LINT1 is emulated by
checking the current state of the in-kernel APIC, only injecting a NMI
into the VCPU if LINT1 is unmasked and configured to DM_NMI.
MSI is not yet supported, so we disable this when the in-kernel model is
in use.
CC: Lai Jiangshan <laijs@cn.fujitsu.com>
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
KVM is forced to disable the IRQ0 override when we run with in-kernel
irqchip but without IRQ routing support of the kernel. Set the fwcfg
value correspondingly. This aligns us with qemu-kvm.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Add the basic infrastructure to active in-kernel irqchip support, inject
interrupts into these models, and maintain IRQ routes.
Routing is optional and depends on the host arch supporting
KVM_CAP_IRQ_ROUTING. When it's not available on x86, we looe the HPET as
we can't route GSI0 to IOAPIC pin 2.
In-kernel irqchip support will once be controlled by the machine
property 'kernel_irqchip', but this is not yet wired up.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Introduce a memory region type that can reserve I/O space. Such regions
are useful for modeling I/O that is only handled outside of QEMU, i.e.
in the context of an accelerator like KVM.
Any access to such a region from QEMU is a bug, but could theoretically
be triggered by guest code (DMA to reserved region). So only warning
about such events once, then ignore them.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Split up the IOAPIC analogously to APIC and i8259. KVM will share the
IOAPICCommonState, the vmstate, reset logic and certain init parts with
the user space model.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
As all devices undergo a reset prior to vmloa, and the reset value of
irr is 0, we do not need to do this clearing for older vmstates
explicitly. Dropping this redundant code will also make KVM integration
a bit simpler.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Analogously to the APIC, we will reuse some parts of the user space
i8259 model for KVM. The base class provides a common device state, the
vmstate, the property list, a reset core and some shared init bits.
This also introduces a common helper to instantiate a single i8259 chip
from the cascade-creating i8259_init function.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Use DeviceState instead of PicState in the public i8259 API. This is
cleaner and allows to reorganize the PIC data structures for KVM reuse.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
To enable migration between accelerated and non-accelerated APIC models,
we will need to handle the timer saving and restoring specially and can
no longer rely on the automatics of VMSTATE_TIMER. Specifically,
accelerated model will not start any QEMUTimer.
This patch therefore factors out the generic bits into apic_next_timer
and use a post-load callback to implemented model-specific logic.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
The KVM in-kernel APIC model will reuse parts of the user space model
while providing the same frontend view to guest and most management
interfaces.
Factor out an APIC base class to encapsulate those parts that will be
shared by user space and KVM model. This class offers callback hooks for
init, base/tpr setting, and the external NMI delivery that will be
set via APICCommonInfo structure and implemented specifically in the
subclasses.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
On real hardware, NMI button events are injected via the LINT1 line of
the APICs. E.g. kdump expect this wiring and gets upset if the per-APIC
LINT1 mask is not respected, i.e. if NMIs are injected to VCPUs that
should not receive them. Change the APIC emulation code to reflect this.
Based on qemu-kvm patch by Lai Jiangshan.
CC: Lai Jiangshan <laijs@cn.fujitsu.com>
Reported-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com>
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
All LVTs are masked on reset, so the timer becomes ineffective. Letting
it tick nevertheless is harmless, but will at least create a spurious
trace event.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
More KVM-specific devices will come, so let's start with moving the
kvmclock into a dedicated folder.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Rename msix_supported to msi_supported and control MSI and MSI-X
activation this way. That was likely to original intention for this
flag, but MSI support came after MSI-X.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Running `make distclean' followed by a new out-of-tree build would fail
due to stale generated QMP headers in the tree.
Commit 611b727374 (Makefile: remove more
generated files on clean) made sure generated sources are removed.
Also remove generated headers introduced in commit
e3193601c8 (qapi: use middle mode in QMP
server).
Signed-off-by: Andreas Färber <andreas.faerber@web.de>
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Since commit dbfe06c62c (build:
split unit test builds to a separate makefile fragment),
in absence of config-host.mak an undefined $(SRC_PATH) breaks
`make distclean' due to /tests/Makefile not being include'able.
Fix by only including when config-host.mak is present.
Signed-off-by: Andreas Färber <andreas.faerber@web.de>
Cc: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Commit d23948b15a (lm32: add Milkymist
VGAFB support) introduced a stray usage of the softfloat uint32 type.
Use uint32_t instead.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Acked-by: Michael Walle <michael@walle.cc>
Cc: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
This prettifies make output a little by avoiding a very long line.
As gtester prints the checks when they are run, no information is lost.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Commit cbcfa0418f (link the main loop and
its dependencies into the tools) introduced stray usages of int64.
Use int64_t instead.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Let's report specific errors so that management tools and users can
identify the problem.
Two new qerrors are needed:
* QERR_DEVICE_HAS_NO_MEDIUM for ENOMEDIUM
* QERR_DEVICE_IS_READ_ONLY for EACCES
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Over time these must have gotten out of order. Put everything back in
alphabetical order.
This is purely a clean up. In practice nothing depends on the order.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
We're supposed to keep qerror definitions and table entries in
alphabetical order. In practice this is not checked.
I haven't found a nice way to integrate this into the makefile yet but
we can at least have this script which verifies that qerrors are in
alphabetical order.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
New QMP command to change the VNC password.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
HMP is now implemented in terms of QMP. The monitor has a bunch of logic to
deal with HMP right now like readline support. Export it from the monitor so
we can consume it in hmp.c.
In short time, hmp.c will take over all of the readline bits.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Also drops the leftover 'mon' argument.
This is a preparation for the next commits which will port the
eject and change commands to the QAPI.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Drop the qerror_report() call from it and let its callers set the error
themselves. This also allows for dropping the 'ret' variable.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Increase the maximum number of GIC interrupts for a9mp and a11mp to 1020,
and create a configurable property for each defaulting to 96 and 64
(respectively) so that device modelers can set the value appropriately
for their SoC. Other ARM processors also set their maximum number of
used IRQs appropriately.
Set the maximum theoretical number of GIC interrupts to 1020 and
update the save/restore code to only use the appropriate number for
each SoC.
Signed-off-by: Mark Langsdorf <mark.langsdorf@calxeda.com>
Reviewed-by: Andreas Färber <afaerber@suse.de>
[Peter Maydell: fixed minor whitespace snafu]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The current comment says that the arm_timers are restricted to between
32 KHz and 1 MHz, but sp804 TRM does not specify those limits.
Signed-off-by: Mark Langsdorf <mark.langsdorf@calxeda.com>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Instantiate the L2 cache controller on the ARM devboards which have one,
since we have a dummy model of it now. Note that the only non-MP board
with an L2x0 is the PB1176, which we don't model.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Before this patch we would allow the (iso) buffer to grow unlimited
(and it would under certain circumstances) leading to way too high
latencies for iso data streams.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Anthony Liguori
Jan Kiszka
Vadim Rozenfeld
Andreas Färber
Andreas Färber
Stefan Weil
Stefan Hajnoczi
Luiz Capitulino
Markus Armbruster
Mark Langsdorf
Peter Maydell
Hans de Goede