Commit Graph

214 Commits

Author SHA1 Message Date
Alex Bligh bc72ad6754 aio / timers: Switch entire codebase to the new timer API
This is an autogenerated patch using scripts/switch-timer-api.

Switch the entire code base to using the new timer API.

Note this patch may introduce some line length issues.

Signed-off-by: Alex Bligh <alex@alex.org.uk>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-08-22 19:14:24 +02:00
Alex Bligh 6a1751b7aa aio / timers: Untangle include files
include/qemu/timer.h has no need to include main-loop.h and
doing so causes an issue for the next patch. Unfortunately
various files assume including timers.h will pull in main-loop.h.
Untangle this mess.

Signed-off-by: Alex Bligh <alex@alex.org.uk>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-08-22 19:10:27 +02:00
Stefan Weil dfc6f86567 misc: Use g_assert_not_reached for code which is expected to be unreachable
The macro g_assert_not_reached is a better self documenting replacement
for assert(0) or assert(false).

Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2013-07-27 11:22:54 +04:00
Amos Kong b1be42803b net: add support of mac-programming over macvtap in QEMU side
Currently macvtap based macvlan device is working in promiscuous
mode, we want to implement mac-programming over macvtap through
Libvirt for better performance.

Design:
 QEMU notifies Libvirt when rx-filter config is changed in guest,
 then Libvirt query the rx-filter information by a monitor command,
 and sync the change to macvtap device. Related rx-filter config
 of the nic contains main mac, rx-mode items and vlan table.

This patch adds a QMP event to notify management of rx-filter change,
and adds a monitor command for management to query rx-filter
information.

Test:
 If we repeatedly add/remove vlan, and change macaddr of vlan
 interfaces in guest by a loop script.

Result:
 The events will flood the QMP client(management), management takes
 too much resource to process the events.

 Event_throttle API (set rate to 1 ms) can avoid the events to flood
 QMP client, but it could cause an unexpected delay (~1ms), guests
 guests normally expect rx-filter updates immediately.

 So we use a flag for each nic to avoid events flooding, the event
 is emitted once until the query command is executed. The flag
 implementation could not introduce unexpected delay.

There maybe exist an uncontrollable delay if we let Libvirt do the
real change, guests normally expect rx-filter updates immediately.
But it's another separate issue, we can investigate it when the
work in Libvirt side is done.

Michael S. Tsirkin: tweaked to enable events on start
Michael S. Tsirkin: fixed not to crash when no id
Michael S. Tsirkin: fold in patch:
   "additional fixes for mac-programming feature"
Amos Kong: always notify QMP client if mactable is changed
Amos Kong: return NULL list if no net client supports rx-filter query

Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Amos Kong <akong@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2013-07-15 21:23:08 +03:00
Bas van Sisseren 68756ba8be fix -net user checks by reordering checks
reorder slirp config options. first check the dns-server-address,
then check the first-dhcp-address. the original code was comparing
the first-dhcp-address with the default dns-server-address, not
the configured dns-server-address.

Signed-off-by: Bas van Sisseren <bas@quarantainenet.nl>
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
2013-06-19 12:44:38 +02:00
Jason Wang c87826a878 tap: fix NULL dereference when passing invalid parameters to tap
This patch forbid the following invalid parameters to tap:

1) fd and vhostfds were specified but vhostfd were not specified
2) vhostfds were specified but fds were not specified
3) fds and vhostfd were specified

For 1 and 2, net_init_tap_one() will still pass NULL as vhostfdname to
monitor_handle_fd_param(), which may crash the qemu.

Also remove the unnecessary has_fd check.

Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Stefan Hajnoczi <shajnocz@redhat.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: qemu-stable@nongnu.org
Signed-off-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-06-07 15:48:11 +02:00
Alasdair McLeay d73fe37e7b net: support for bridged networking on Mac OS X
tun tap can be implemented on Mac OS X using
http://tuntaposx.sourceforge.net

It behaves in the same way as FreeBSD/OpenBSD implementations, but Qemu
needs a patch to use the OpenBS/FreeBSD code.

As per the patch listed in this forum thread:
http://forum.gns3.net/post17679.html#p17679

And also as used in the MacPorts installation:
https://trac.macports.org/browser/trunk/dports/emulators/qemu/files/patch-net-tap-interface.diff

Signed-off-by: Alasdair McLeay <alasdair.mcleay@me.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-05-24 16:33:48 +02:00
Jason Wang 7873df408d tap: properly initialize vhostfds
Only tap->vhostfd were checked net_init_tap_one(), but tap->vhostfds were
forgot, this will lead qemu to ignore all fds passed by management through
vhostfds, and tries to create vhost_net device itself. Fix by adding this check
also.

Reportyed-by: Michal Privoznik <mprivozn@redhat.com>
Cc: Michal Privoznik <mprivozn@redhat.com>
Cc: qemu-stable@nongnu.org
Signed-off-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-05-03 13:53:46 +02:00
Amos Kong c963530a5b net: make network client name unique
assign_name() creates a name MODEL.NUM, where MODEL is the client's model,
and NUM is the number of MODELs that already exist.

Markus added NIC naming for non-VLAN clients in commit 53e51d85.
commit d33d93b2 incorrectly added a judgement of net-hub. It caused
net clients created with -netdev get same names.

eg:
 # qemu-upstream -device virtio-net-pci,netdev=h1 -netdev tap,id=h1 \
                    -device virtio-net-pci,netdev=h2 -netdev tap,id=h2 ..
 (qemu) info network
 virtio-net-pci.0: index=0,type=nic,model=virtio-net-pci,macaddr=52:54:00:12:34:56
  \ h1: index=0,type=tap,ifname=tap0,script=/etc/qemu-ifup,downscript=/etc/qemu-ifdown
 virtio-net-pci.0: index=0,type=nic,model=virtio-net-pci,macaddr=52:54:00:12:34:57
  \ h2: index=0,type=tap,ifname=tap1,script=/etc/qemu-ifup,downscript=/etc/qemu-ifdown

This patch removed the check of nic-hub, and created unique names for
all net clients that have same model.

v2: update commitlog & comments

Signed-off-by: Amos Kong <akong@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-05-03 13:53:46 +02:00
Paolo Bonzini dccfcd0e5f sysemu: avoid proliferation of include/ subdirectories
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-04-15 18:19:25 +02:00
Paolo Bonzini 0d09e41a51 hw: move headers to include/
Many of these should be cleaned up with proper qdev-/QOM-ification.
Right now there are many catch-all headers in include/hw/ARCH depending
on cpu.h, and this makes it necessary to compile these files per-target.
However, fixing this does not belong in these patches.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-04-08 18:13:10 +02:00
Hans de Goede 456d606923 qemu-char: Call fe_claim / fe_release when not using qdev chr properties
chardev-frontends need to explictly check, increase and decrement the
avail_connections "property" of the chardev when they are not using a
qdev-chardev-property for the chardev.

This fixes things like:
qemu-kvm -chardev stdio,id=foo -device isa-serial,chardev=foo \
  -mon chardev=foo

Working, where they should fail. Most of the changes here are due to
old hardware emulation code which is using serial_hds directly rather then
a qdev-chardev-property.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Message-id: 1364412581-3672-3-git-send-email-hdegoede@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-04-04 19:21:25 -05:00
Stefan Hajnoczi fc13fa00ea net: ensure "socket" backend uses non-blocking fds
There are several code paths in net_init_socket() depending on how the
socket is created: file descriptor passing, UDP multicast, TCP, or UDP.
Some of these support both listen and connect.

Not all code paths set the socket to non-blocking.  This patch addresses
the file descriptor passing and UDP cases which were missing
socket_set_nonblock(fd) calls.

I considered moving socket_set_nonblock(fd) to a central location but it
turns out the code paths are different enough to require non-blocking at
different places.

Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2013-04-02 11:47:37 -04:00
Stefan Hajnoczi f9e8cacc55 oslib-posix: rename socket_set_nonblock() to qemu_set_nonblock()
The fcntl(fd, F_SETFL, O_NONBLOCK) flag is not specific to sockets.
Rename to qemu_set_nonblock() just like qemu_set_cloexec().

Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2013-04-02 11:47:37 -04:00
Scott Feldman d32fcad366 net: increase buffer size to accommodate Jumbo frame pkts
Socket buffer sizes were hard-coded to 4K for VDE and socket netdevs.  Bump this
up to 68K (ala tap netdev) to handle maximum GSO packet size (64k) plus plenty
of room for the ethernet and virtio_net headers.

Originally, ran into this limitation when using -netdev UDP sockets to connect
VM-to-VM, where VM interface is configure with MTU=9000.  (Using virtio_net
NIC model).  Test is simple: ping -M do -s 8500 <target>.  This test will
attempt to ping with unfragmented packet of given size.  Without patch, size
is limited to < 4K (minus protocol hdrs).  With patch, ping test works with pkt
size up to 9000 (again, minus protocol hdrs).

v2: per Stefan, increase buf size to (4096+65536) as done in tap and apply
    to vde and socket netdevs.
v1: increase buf size to 12K just for -netdev UDP sockets

Signed-off-by: Scott Feldman <sfeldma@cumulusnetworks.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-03-25 11:14:07 +01:00
Dmitry Fleytman 75020a7021 Common definitions for VMWARE devices
Signed-off-by: Dmitry Fleytman <dmitry@daynix.com>
Signed-off-by: Yan Vugenfirer <yan@daynix.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-03-25 11:13:10 +01:00
Dmitry Fleytman 8402630169 net: iovec checksum calculator
Signed-off-by: Dmitry Fleytman <dmitry@daynix.com>
Signed-off-by: Yan Vugenfirer <yan@daynix.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-03-25 11:13:10 +01:00
Dmitry Fleytman 5acf5ea4bc Checksum-related utility functions
net_checksum_add_cont()
checksum calculation for scattered data with odd chunk sizes

net_raw_checksum()
checksum calculation for a buffer

Signed-off-by: Dmitry Fleytman <dmitry@daynix.com>
Signed-off-by: Yan Vugenfirer <yan@daynix.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-03-25 11:13:09 +01:00
Stefan Hajnoczi 20048d0a12 net: use socket_set_nodelay() for -netdev socket
Reduce -netdev socket latency by disabling the Nagle algorithm on
SOCK_STREAM sockets in net/socket.c.  Since we are tunelling Ethernet
over TCP we shouldn't artificially delay outgoing packets, let the guest
decide packet scheduling.

I already get sub-millisecond -netdev socket ping times on localhost, so
there was no measurable difference in my testing.  This won't hurt
though and may improve remote socket performance.

Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Benoit Canet <benoit@irqsave.net>
Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
2013-03-25 11:13:09 +01:00
Peter Maydell 085d813407 Fix typos and misspellings
Fix various typos and misspellings. The bulk of these were found with
codespell.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-03-22 13:25:07 +01:00
Stefan Weil 9957fc7f1e MinGW: Replace setsockopt by qemu_setsocketopt
Instead of adding missing type casts which are needed by MinGW for the
4th argument, the patch uses qemu_setsockopt which was invented for this
purpose.

Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-03-22 13:14:48 +01:00
Jason Wang f6b26cf257 net: reduce the unnecessary memory allocation of multiqueue
Edivaldo reports a problem that the array of NetClientState in NICState is too
large - MAX_QUEUE_NUM(1024) which will wastes memory even if multiqueue is not
used.

Instead of static arrays, solving this issue by allocating the queues on demand
for both the NetClientState array in NICState and VirtIONetQueue array in
VirtIONet.

Tested by myself, with single virtio-net-pci device. The memory allocation is
almost the same as when multiqueue is not merged.

Cc: Edivaldo de Araujo Pereira <edivaldoapereira@yahoo.com.br>
Cc: qemu-stable@nongnu.org
Signed-off-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-02-27 16:10:47 +01:00
Peter Lieven d26e445c80 tap: set IFF_ONE_QUEUE per default
historically the kernel queues packets two times. once
at the device and second in qdisc. this is believed to cause
interface stalls if one of these queues overruns.

setting IFF_ONE_QUEUE is the default in kernels >= 3.8. the
flag is ignored since then. see kernel commit
5d097109257c03a71845729f8db6b5770c4bbedc

Signed-off-by: Peter Lieven <pl@kamp.de>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-02-27 16:10:47 +01:00
Jason Wang ce675a7579 tap: forbid creating multiqueue tap when hub is used
Obviously, hub does not support multiqueue tap. So this patch forbids creating
multiple queue tap when hub is used to prevent the crash when command line such
as "-net tap,queues=2" is used.

Cc: qemu-stable@nongnu.org
Signed-off-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-02-27 16:10:47 +01:00
Luigi Rizzo 7d91ddd25e net: fix unbounded NetQueue
In the current implementation of qemu, running without a network
backend will cause the queue to grow unbounded when the guest is
transmitting traffic.

This patch fixes the problem by implementing bounded size NetQueue,
used with an arbitrary limit of 10000 packets, and dropping packets
when the queue is full _and_ the sender does not pass a callback.

The second condition makes sure that we never drop packets that
contains a callback (which would be tricky, because the producer
expects the callback to be run when all previous packets have been
consumed; so we cannot run it when the packet is dropped).

If documentation is correct, producers that submit a callback should
stop sending when their packet is queued, so there is no real risk
that the queue exceeds the max size by large values.

Signed-off-by: Luigi Rizzo <rizzo@iet.unipi.it>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-02-27 16:10:39 +01:00
Luigi Rizzo 199ee608f0 net: fix qemu_flush_queued_packets() in presence of a hub
When frontend and backend are connected through a hub as below
(showing only one direction), and the frontend (or in general, all
output ports of the hub) cannot accept more traffic, the backend
queues packets in queue-A.

When the frontend (or in general, one output port) becomes ready again,
quemu tries to flush packets from queue-B, which is unfortunately empty.

  e1000.0 <--[queue B]-- hub0port0(hub)hub0port1 <--[queue A]-- tap.0

To fix this i propose to introduce a new function net_hub_flush()
which is called when trying to flush a queue connected to a hub.

Signed-off-by: Luigi Rizzo <rizzo@iet.unipi.it>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-02-27 16:10:23 +01:00
Andreas Färber cc2a90432d net: Avoid NULL function pointer dereference on cleanup
The pSeries machine and some other devices don't supply a cleanup
callback. Revert part of 1ceef9f273 that
started calling it unconditionally.

Cc: Jason Wang <jasowang@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Message-id: 1360707366-9271-1-git-send-email-afaerber@suse.de
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-02-13 11:57:25 -06:00
Michael Roth b890492110 net: fix infinite loop on exit
1ceef9f273 added handling for cleaning
up multiple queues in qemu_del_nic() for cases where multiqueue is in
use. To determine the number of queues it looks at nic->conf->queues,
then iterates through all the queues to cleanup the associated
NetClientStates. If no queues are found, no NetClientStates are deleted.

However, nic->conf->queues is only set when a peer is created via
-netdev or netdev_add, and is otherwise 0. This causes us to spin in
net_cleanup() if we attempt to shut down qemu before adding a host
device.

Since qemu_new_nic() unconditionally creates at least 1
queue/NetClientState at queue idx 0, make qemu_del_nic() always attempt
to clean it up.

Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-02-07 13:13:39 -06:00
Anthony Liguori 02cd809099 tap: unbreak -netdev tap,fd=X
The multiqueue patch series broke -netdev tap,fd=X which manifests
as libvirt not being able to start a guest.  This was because it
passed NULL for the netdev name which results in an anonymous netdev
device regardless of what the user specified.

Cc: Jason Wang <jasowang@redhat.com>
Cc: Bruce Rogers <brogers@suse.com>
Reported-by: Bruce Rogers <brogers@suse.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-02-01 18:05:30 -06:00
Jason Wang 264986e2c8 tap: multiqueue support
Recently, linux support multiqueue tap which could let userspace call TUNSETIFF
for a signle device many times to create multiple file descriptors as
independent queues. User could also enable/disabe a specific queue through
TUNSETQUEUE.

The patch adds the generic infrastructure to create multiqueue taps. To achieve
this a new parameter "queues" were introduced to specify how many queues were
expected to be created for tap by qemu itself. Alternatively, management could
also pass multiple pre-created tap file descriptors separated with ':' through a
new parameter fds like -netdev tap,id=hn0,fds="X:Y:..:Z". Multiple vhost file
descriptors could also be passed in this way.

Each TAPState were still associated to a tap fd, which mean multiple TAPStates
were created when user needs multiqueue taps. Since each TAPState contains one
NetClientState, with the multiqueue nic support, an N peers of NetClientState
were built up.

A new parameter, mq_required were introduce in tap_open() to create multiqueue
tap fds.

Signed-off-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-02-01 11:03:02 -06:00
Jason Wang e5dc0b402e tap: introduce a helper to get the name of an interface
This patch introduces a helper tap_get_ifname() to get the device name of tap
device. This is needed when ifname is unspecified in the command line and qemu
were asked to create tap device by itself. In this situation, the name were
allocated by kernel, so if multiqueue is asked, we need to fetch its name after
creating the first queue.

Only linux has this support since it's the only platform that supports
multiqueue tap.

Signed-off-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-02-01 11:03:02 -06:00
Jason Wang 16dbaf905b tap: support enabling or disabling a queue
This patch introduce a new bit - enabled in TAPState which tracks whether a
specific queue/fd is enabled. The tap/fd is enabled during initialization and
could be enabled/disabled by tap_enalbe() and tap_disable() which calls platform
specific helpers to do the real work. Polling of a tap fd can only done when
the tap was enabled.

Signed-off-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-02-01 11:03:02 -06:00
Jason Wang 94fdc6d030 tap: add Linux multiqueue support
This patch add basic multiqueue support for Linux. When multiqueue is needed, we
will first check whether kernel support multiqueue tap before creating more
queues. Two new functions tap_fd_enable() and tap_fd_disable() were introduced
to enable and disable a specific queue. Since the multiqueue is only supported
in Linux, return error on other platforms.

Signed-off-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-02-01 11:03:01 -06:00
Jason Wang 5193e5fbb5 tap: factor out common tap initialization
This patch factors out the common initialization of tap into a new helper
net_init_tap_one(). This will be used by multiqueue tap patches.

Signed-off-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-02-01 11:03:01 -06:00
Jason Wang 4e4f9ae7da tap: import linux multiqueue constants
Import multiqueue constants from if_tun.h from 3.8-rc3. A new ifr flag
IFF_MULTI_QUEUE were introduced to create a multiqueue backend by calling
TUNSETIFF with the this flag and with the same interface name many times.

A new ioctl TUNSETQUEUE were introduced. When doing this ioctl with
IFF_DETACH_QUEUE, the queue were disabled in the linux kernel. When doing this
ioctl with IFF_ATTACH_QUEUE, the queue were enabled in the linux kernel.

Signed-off-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-02-01 11:03:01 -06:00
Jason Wang 1ceef9f273 net: multiqueue support
This patch adds basic multiqueue support for qemu. The idea is simple, an array
of NetClientStates were introduced in NICState, parse_netdev() were extended to
find and match all NetClientStates belongs to the backend and place their
pointers in NICConf. Then qemu_new_nic can setup a N:N mapping between NICStates
that belongs to a nic and NICStates belongs to the netdev. And a queue_index
were introduced in NetClientState to track its index. After this, each peers of
a NICState were abstracted as a queue.

After this change, all NetClientState that belongs to the same backend/nic has
the same id. When use want to change the link status, all NetClientStates that
belongs to the same backend/nic will be also changed. When user want to delete
a device or netdev, all NetClientStates that belongs to the same backend/nic
will be deleted also. Changing or deleting an specific queue is not allowed.

Signed-off-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-02-01 11:03:01 -06:00
Jason Wang f7860455fd net: introduce NetClientState destructor
To allow allocating an array of NetClientState and free it once, this patch
introduces destructor of NetClientState. Which could do type specific free,
which could be used by multiqueue to free the array once.

Signed-off-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-02-01 11:03:01 -06:00
Jason Wang 18a1541a8d net: introduce qemu_net_client_setup()
This patch separates the setup of NetClientState from its allocation, this will
allow allocating an arrays of NetClientState and does the initialization one by
one which is what multiqueue needs.

Signed-off-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-02-01 11:03:01 -06:00
Jason Wang 6c51ae73fc net: introduce qemu_find_net_clients_except()
In multiqueue, all NetClientState that belongs to the same netdev or nic has the
same id. So this patches introduces an helper qemu_find_net_clients_except()
which finds all NetClientState with the same id. This will be used by multiqueue
networking.

Signed-off-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-02-01 11:03:01 -06:00
Jason Wang 948ecf219c net: intorduce qemu_del_nic()
To support multiqueue nic, this patch separate the nic destructor from
qemu_del_net_client() to a new helper qemu_del_nic() since the mapping bettween
NiCState and NetClientState were not 1:1 in multiqueue. The following patches
would refactor this function to support multiqueue nic.

Signed-off-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-02-01 11:03:01 -06:00
Jason Wang cc1f0f4542 net: introduce qemu_get_nic()
To support multiqueue, this patch introduces a helper qemu_get_nic() to get
NICState from a NetClientState. The following patches would refactor this helper
to support multiqueue.

Signed-off-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-02-01 11:03:00 -06:00
Jason Wang b356f76de3 net: introduce qemu_get_queue()
To support multiqueue, the patch introduce a helper qemu_get_queue()
which is used to get the NetClientState of a device. The following patches would
refactor this helper to support multiqueue.

Signed-off-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-02-01 11:02:55 -06:00
Jason Wang 28a65891a0 net: tap: use abort() instead of assert(0)
Signed-off-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-02-01 10:50:59 -06:00
Jason Wang ec45f08313 net: tap: using bool instead of bitfield
Signed-off-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-02-01 10:50:59 -06:00
Markus Armbruster c64f50d1e2 g_strdup(NULL) returns NULL; simplify
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-01-30 11:14:46 +01:00
Wenchao Xia 84f2d0ea0f HMP: add QDict to info callback handler
This patch change all info call back function to take
additional QDict * parameter, which allow those command
take parameter. Now it is set to NULL at default case.

Signed-off-by: Wenchao Xia <xiawenc@linux.vnet.ibm.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2013-01-17 10:24:52 -02:00
Paolo Bonzini 4d4545743f qemu-option: move standard option definitions out of qemu-config.c
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-01-12 17:17:53 +01:00
Liming Wang 3f124b6874 net: add missing include file
To fix building error:

CC    net/vde.o
net/vde.c: In function ‘vde_cleanup’:
net/vde.c:65:5: error: implicit declaration of function ‘qemu_set_fd_handler’ [-Werror=implicit-function-declaration]
net/vde.c:65:5: error: nested extern declaration of ‘qemu_set_fd_handler’ [-Werror=nested-externs]
cc1: all warnings being treated as errors

Signed-off-by: Liming Wang <walimisdev@gmail.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2012-12-22 12:06:48 +00:00
Stefan Weil b2136140f6 net: Add missing include statement (fix compiler warnings for MinGW)
These and some more compiler warnings were caused by a recent commit:

net/tap-win32.c:724: warning: no previous prototype for ‘tap_has_ufo’
net/tap-win32.c:729: warning: no previous prototype for ‘tap_has_vnet_hdr’
...

Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2012-12-22 12:05:46 +00:00
Anthony Liguori 27dd773058 Merge remote-tracking branch 'bonzini/header-dirs' into staging
* bonzini/header-dirs: (45 commits)
  janitor: move remaining public headers to include/
  hw: move executable format header files to hw/
  fpu: move public header file to include/fpu
  softmmu: move remaining include files to include/ subdirectories
  softmmu: move include files to include/sysemu/
  misc: move include files to include/qemu/
  qom: move include files to include/qom/
  migration: move include files to include/migration/
  monitor: move include files to include/monitor/
  exec: move include files to include/exec/
  block: move include files to include/block/
  qapi: move include files to include/qobject/
  janitor: add guards to headers
  qapi: make struct Visitor opaque
  qapi: remove qapi/qapi-types-core.h
  qapi: move inclusions of qemu-common.h from headers to .c files
  ui: move files to ui/ and include/ui/
  qemu-ga: move qemu-ga files to qga/
  net: reorganize headers
  net: move net.c to net/
  ...

Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-12-19 17:15:39 -06:00