Commit Graph

85 Commits

Author SHA1 Message Date
Anthony Liguori 90c45b3031 Merge remote-tracking branch 'kwolf/for-anthony' into staging
* kwolf/for-anthony: (32 commits)
  osdep: Less restrictive F_SEFL in qemu_dup_flags()
  qemu-iotests: add testcases for mirroring on-source-error/on-target-error
  qmp: add pull_event function
  mirror: add support for on-source-error/on-target-error
  iostatus: forward block_job_iostatus_reset to block job
  qemu-iotests: add mirroring test case
  mirror: implement completion
  qmp: add drive-mirror command
  mirror: introduce mirror job
  block: introduce BLOCK_JOB_READY event
  block: add block-job-complete
  block: rename block_job_complete to block_job_completed
  block: export dirty bitmap information in query-block
  block: introduce new dirty bitmap functionality
  block: add bdrv_open_backing_file
  block: add bdrv_query_stats
  block: add bdrv_query_info
  qemu-config: Add new -add-fd command line option
  monitor: Prevent removing fd from set during init
  monitor: Enable adding an inherited fd to an fd set
  ...

Conflicts:
	vl.c

Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-10-29 10:34:05 -05:00
Aurelien Jarno 852bef0e0c hmp: fix info cpus for sparc targets
On sparc targets, info cpus returns this kind of output:

| info cpus
| * CPU #0: pc=0x0000000000424d18pc=0x0000000000424d18npc=0x0000000000424d1c thread_id=19460

pc is printed twice, there is no space between pc, pc and npc.

With this patch, pc is not printed anymore when has_npc is set. In addition
the space is printed before pc/nip/npc/PC instead of after the colon so that
multiple prints are possible. This result on the following kind of input on
sparc targets:

| info cpus
| * CPU #0: pc=0x0000000000424d18 npc=0x0000000000424d1c thread_id=19460

Cc: Luiz Capitulino <lcapitulino@redhat.com>
Cc: Markus Armbruster <armbru@redhat.com>
Cc: Blue Swirl <blauwirbel@gmail.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2012-10-24 11:27:33 -02:00
Paolo Bonzini b952b5589a mirror: add support for on-source-error/on-target-error
Error management is important for mirroring; otherwise, an error on the
target (even something as "innocent" as ENOSPC) requires to start again
with a full copy.  Similar to on_read_error/on_write_error, two separate
knobs are provided for on_source_error (reads) and on_target_error (writes).
The default is 'report' for both.

The 'ignore' policy will leave the sector dirty, so that it will be
retried later.  Thus, it will not cause corruption.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-10-24 10:26:22 +02:00
Paolo Bonzini d9b902db3f qmp: add drive-mirror command
This adds the monitor commands that start the mirroring job.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-10-24 10:26:20 +02:00
Paolo Bonzini aeae883baf block: add block-job-complete
While streaming can be dropped as soon as it progressed through the whole
image, mirroring needs to be completed manually for two reasons: 1) so that
management knows exactly when the VM switches to the target; 2) because
for other use cases such as replication, we may leave the operation running
for the whole life of the virtual machine.

Add a new block job command that manually completes background operations.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-10-24 10:26:19 +02:00
Juan Quintela 8d017193e2 migration: Add dirty_pages_rate to query migrate output
It indicates how many pages were dirtied during the last second.

Signed-off-by: Juan Quintela <quintela@redhat.com>
2012-10-17 18:34:58 +02:00
Juan Quintela 2c52ddf1cb migration: print expected downtime in info migrate
Signed-off-by: Juan Quintela <quintela@redhat.com>
2012-10-17 18:34:58 +02:00
Juan Quintela 9c5a9fcf53 migration: print total downtime for final phase of migration
Signed-off-by: Juan Quintela <quintela@redhat.com>

Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Orit Wasserman <owasserm@redhat.com>
2012-10-17 18:34:58 +02:00
Anthony Liguori 05d4f2f2ca Merge remote-tracking branch 'kwolf/for-anthony' into staging
* kwolf/for-anthony: (30 commits)
  qemu-iotests: add tests for streaming error handling
  qemu-iotests: map underscore to dash in QMP argument names
  blkdebug: process all set_state rules in the old state
  stream: add on-error argument
  block: introduce block job error
  iostatus: reorganize io error code
  iostatus: change is_read to a bool
  iostatus: move BlockdevOnError declaration to QAPI
  iostatus: rename BlockErrorAction, BlockQMPEventAction
  qemu-iotests: add test for pausing a streaming operation
  qmp: add block-job-pause and block-job-resume
  block: add support for job pause/resume
  qmp: add 'busy' member to BlockJobInfo
  block: add block_job_query
  block: move job APIs to separate files
  block: fix documentation of block_job_cancel_sync
  qerror/block: introduce QERR_BLOCK_JOB_NOT_ACTIVE
  qemu-iotests: add initial tests for live block commit
  QAPI: add command for live block commit, 'block-commit'
  block: helper function, to find the base image of a chain
  ...
2012-10-04 19:53:50 -05:00
Paolo Bonzini 1d809098aa stream: add on-error argument
This patch adds support for error management to streaming.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-09-28 19:40:56 +02:00
Paolo Bonzini 6e37fb811a qmp: add block-job-pause and block-job-resume
Add QMP commands matching the functionality.

Paused jobs cannot be canceled without first resuming them.  This
ensures that I/O errors are never missed by management.  However, an
optional force argument can be specified to allow that.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-09-28 19:14:32 +02:00
Luiz Capitulino 9f32897768 qmp: qmp_send_key(): accept key codes in hex
Before the qapi conversion, the sendkey command could be used to
send key codes in hex directly to the guest. In HMP, this would
be like:

 (qemu) sendkey 0xdc

However, the qapi conversion broke this, as it only supports sending
QKeyCode values to the guest. That's a regression.

This commit fixes the problem by adding hex value support down
the QMP interface, qmp_send_key().

In more detail, this commit:

 1. Adds the KeyValue union. This can represent an hex value or
    a QKeyCode value

 2. *Changes* the QMP send-key command to take an KeyValue argument
    instead of a QKeyCode one

 3. Adapt hmp_send_key() to the QMP interface changes

Item 2 is an incompatible change, but as we're in development phase
(and this command has been merged a few weeks ago) this shouldn't be
a problem.

Finally, it's not possible to split this commit without breaking the
build.

Reported-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
2012-09-27 09:50:30 -03:00
Luiz Capitulino 753637695b hmp: dump-guest-memory: hardcode protocol argument to "file:"
Today, it's necessary to specify the protocol you want to use
when dumping the guest memory, for example:

 (qemu) dump-guest-memory file:/tmp/guest-memory

This has a few issues:

 1. It's cumbersome to type
 2. We loose file path autocompletion
 3. Being able to specify fd:X in HMP makes little sense for humans

Because of these reasons, hardcode the 'protocol' argument to
'file:' in HMP.

Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
2012-09-27 09:46:17 -03:00
Aurelien Jarno 69fc255350 Merge branch 'spice.v59' of git://anongit.freedesktop.org/spice/qemu
* 'spice.v59' of git://anongit.freedesktop.org/spice/qemu:
  Remove #ifdef QXL_COMMAND_FLAG_COMPAT_16BPP
  qxl: Add set_client_capabilities() interface to QXLInterface
  spice: make number of surfaces runtime-configurable.
  configure: print spice-protocol and spice-server versions
  qxl: add QXL_IO_MONITORS_CONFIG_ASYNC
  qxl: disallow unknown revisions
  qxl/update_area_io: guest_bug on invalid parameters
  spice: increase the verbosity of spice section in "qemu --help"
  spice: adding seamless-migration option to the command line
  spice: add 'migrated' flag to spice info
  spice migration: add QEVENT_SPICE_MIGRATE_COMPLETED
  spice: notify on vm state change only via spice_server_vm_start/stop
  spice: notify spice server on vm start/stop
  spice: abort on invalid streaming cmdline params
2012-09-10 15:32:11 +02:00
Luiz Capitulino ad39cf6d15 qapi: convert screendump
Next commits will update devices to propagate errors.

Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2012-09-05 15:48:57 -03:00
Amos Kong e4c8f004c5 qapi: convert sendkey
Convert 'sendkey' to use QAPI.

QAPI passes key's index of mapping table to qmp_send_key(),
not keycode. So we use help functions to convert key/code to
index of key_defs, and 'index' will be converted to 'keycode'
inside qmp_send_key().

For qmp, QAPI would check invalid key and raise error.
For hmp, invalid key is checked in hmp_send_key().

'send-key' of QMP doesn't support key in hexadecimal format.

Signed-off-by: Amos Kong <akong@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2012-09-05 15:48:57 -03:00
Yonit Halperin 61c4efe2cb spice: add 'migrated' flag to spice info
The flag is 'true' when spice migration has completed on the src side.
It is needed for a case where libvirt dies before migration completes
and it misses the event QEVENT_SPICE_MIGRATE_COMPLETED.
When libvirt is restored and queries the migration status, it also needs
to query spice and check if its migration has completed.

Signed-off-by: Yonit Halperin <yhalperi@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2012-09-05 17:11:55 +02:00
Juan Quintela 7aa939af39 migration: move total_time from ram stats to migration info
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2012-08-21 15:06:24 -03:00
Anthony Liguori 633decd711 Merge remote-tracking branch 'qmp/queue/qmp' into staging
* qmp/queue/qmp: (48 commits)
  target-ppc: add implementation of query-cpu-definitions (v2)
  target-i386: add implementation of query-cpu-definitions (v2)
  qapi: add query-cpu-definitions command (v2)
  compiler: add macro for GCC weak symbols
  qapi: add query-machines command
  qapi: mark QOM commands stable
  qmp: introduce device-list-properties command
  qmp: add SUSPEND_DISK event
  qmp: qmp-events.txt: add missing doc for the SUSPEND event
  qmp: qmp-events.txt: put events in alphabetical order
  qmp: emit the WAKEUP event when the guest is put to run
  qmp: don't emit the RESET event on wakeup from S3
  scripts: qapi-commands.py: qmp-commands.h: include qdict.h
  docs: writing-qmp-commands.txt: update error section
  error, qerror: drop QDict member
  qerror: drop qerror_table and qerror_format()
  error, qerror: pass desc string to error calls
  error: drop error_get_qobject()/error_set_qobject()
  qemu-ga: switch to the new error format on the wire
  qmp: switch to the new error format on the wire
  ...
2012-08-13 16:12:35 -05:00
Luiz Capitulino ab878ddfee hmp: hmp_change(): use error_get_class()
The error_is_type() function is going to be dropped.

Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
2012-08-13 13:21:37 -03:00
Luiz Capitulino eef5ad1086 hmp_change(): don't access DeviceEncrypted's data
It's not needed. As the device name is already known, we can replace
the duplicated password prompting code by monitor_read_block_device_key().

This overly simplifies hmp_change().

Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
2012-08-13 13:20:31 -03:00
Luiz Capitulino 8b7f6fbbdc hmp: hmp_cont(): don't rely on QERR_DEVICE_ENCRYPTED
This commit changes hmp_cont() to loop through all block devices
and proactively set an encryption key for any encrypted device
missing a key.

This change is needed because QERR_DEVICE_ENCRYPTED is going to be
dropped by a future commit.

Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
2012-08-13 13:20:12 -03:00
Orit Wasserman f36d55af74 Add XBZRLE statistics
Signed-off-by: Benoit Hudzia <benoit.hudzia@sap.com>
Signed-off-by: Petter Svard <petters@cs.umu.se>
Signed-off-by: Aidan Shribman <aidan.shribman@sap.com>
Signed-off-by: Orit Wasserman <owasserm@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>

Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
2012-08-08 13:51:12 +02:00
Orit Wasserman 004d4c10ae Add migration accounting for normal and duplicate pages
Signed-off-by: Benoit Hudzia <benoit.hudzia@sap.com>
Signed-off-by: Petter Svard <petters@cs.umu.se>
Signed-off-by: Aidan Shribman <aidan.shribman@sap.com>
Signed-off-by: Orit Wasserman <owasserm@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>

Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
2012-08-08 13:51:12 +02:00
Orit Wasserman 9e1ba4cc4e Add migrate_set_cache_size command
Change XBZRLE cache size in bytes (the size should be a power of 2, it will be
rounded down to the nearest power of 2).
If XBZRLE cache size is too small there will be many cache miss.

New query-migrate-cache-size QMP command and 'info migrate_cache_size' HMP
command to query cache value.

Signed-off-by: Benoit Hudzia <benoit.hudzia@sap.com>
Signed-off-by: Petter Svard <petters@cs.umu.se>
Signed-off-by: Aidan Shribman <aidan.shribman@sap.com>
Signed-off-by: Orit Wasserman <owasserm@redhat.com>

Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
2012-08-08 13:51:12 +02:00
Orit Wasserman 0045843324 Add migrate-set-capabilities
The management can enable/disable a capability for the next migration by using
migrate-set-capabilities QMP command.
The user can use migrate_set_capability HMP command.

Signed-off-by: Orit Wasserman <owasserm@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>

Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
2012-08-08 13:51:11 +02:00
Orit Wasserman bbf6da32b5 Add migration capabilities
The management can query the current migration capabilities using
query-migrate-capabilities QMP command.
The user can use 'info migrate_capabilities' HMP command.
Currently only XBZRLE capability is available.

Signed-off-by: Orit Wasserman <owasserm@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>

Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
2012-08-08 13:51:11 +02:00
Benoît Canet 75115d9569 hmp: show the backing file depth
Signed-off-by: Benoit Canet <benoit@irqsave.net>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2012-08-03 10:10:55 -03:00
Corey Bryant 208c9d1b7c qapi: Convert getfd and closefd
Signed-off-by: Corey Bryant <coreyb@linux.vnet.ibm.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2012-07-13 13:46:55 -03:00
Juan Quintela d5f8a5701d Add spent time for migration
We add time spent for migration to the output of "info migrate"
command.  'total_time' means time since the start fo migration if
migration is 'active', and total time of migration if migration is
completed.  As we are also interested in transferred ram when
migration completes, adding all ram statistics

Signed-off-by: Juan Quintela <quintela@redhat.com>
2012-06-29 13:27:28 +02:00
Paolo Bonzini 37003adf96 qmp: include monitor.h when needed
This is needed to get file descriptors from SCM_RIGHTS.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2012-06-15 10:41:05 -03:00
Luiz Capitulino 5f96415527 qapi: convert netdev_del
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Reviewed-By: Laszlo Ersek <lersek@redhat.com>
2012-06-04 13:49:35 -03:00
Luiz Capitulino 928059a37b qapi: convert netdev_add
This is not a full QAPI conversion, but an intermediate step.

In essence, do_netdev_add() is split into three functions:

 1. netdev_add(): performs the actual work. This function is fully
    converted to Error (thus, it's "qapi-friendly")

 2. qmp_netdev_add(): the QMP front-end for netdev_add(). This is
    coded by hand and not auto-generated (gen=no in the schema). The
    reason for this it's a lot easier and simpler to with QemuOpts
    this way

 3. hmp_netdev_add(): HMP front-end.

This design was suggested by Paolo Bonzini.

Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Reviewed-By: Laszlo Ersek <lersek@redhat.com>
2012-06-04 13:49:35 -03:00
Wen Congyang 783e9b4826 introduce a new monitor command 'dump-guest-memory' to dump guest's memory
The command's usage:
   dump-guest-memory [-p] protocol [begin] [length]
The supported protocol can be file or fd:
1. file: the protocol starts with "file:", and the following string is
   the file's path.
2. fd: the protocol starts with "fd:", and the following string is the
   fd's name.

Note:
  1. If you want to use gdb to process the core, please specify -p option.
     The reason why the -p option is not default is:
       a. guest machine in a catastrophic state can have corrupted memory,
          which we cannot trust.
       b. The guest machine can be in read-mode even if paging is enabled.
          For example: the guest machine uses ACPI to sleep, and ACPI sleep
          state goes in real-mode.
  2. If you don't want to dump all guest's memory, please specify the start
     physical address and the length.

Signed-off-by: Wen Congyang <wency@cn.fujitsu.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2012-06-04 13:49:34 -03:00
Paolo Bonzini c6db23958b stream: fix HMP block_job_set_speed
The change of the argument name from value to speed was not propagated there.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-05-10 11:01:59 +02:00
Alon Levy 4efee029cb spice_info: add mouse_mode
Add mouse_mode, either server or mouse, to qmp and hmp commands, based
on spice_server_is_server_mouse added in spice-server 0.10.3.

Signed-off-by: Alon Levy <alevy@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2012-05-03 10:45:04 +02:00
Stefan Hajnoczi c83c66c3b5 block: add 'speed' optional parameter to block-stream
Allow streaming operations to be started with an initial speed limit.
This eliminates the window of time between starting streaming and
issuing block-job-set-speed.  Users should use the new optional 'speed'
parameter instead so that speed limits are in effect immediately when
the job starts.

Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Acked-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2012-04-27 11:44:50 -03:00
Luiz Capitulino a15fef21c7 qapi: convert device_del
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
2012-04-09 14:35:25 -03:00
Luiz Capitulino e1c37d0e94 qapi: Convert migrate
The migrate command is one of those commands where HMP and QMP completely
mix up together. This made the conversion to the QAPI (which separates the
command into QMP and HMP parts) a bit difficult.

The first important change to be noticed is that this commit completes the
removal of the Monitor object from migration code, started by the previous
commit.

Another important and tricky change is about supporting the non-detached
mode. That is, if the user doesn't pass '-d' the migrate command will lock
the monitor and will only release it when migration is finished.

To support this in the new HMP command (hmp_migrate()), it is necessary
to create a timer which runs every second and checks if the migration is
still active. If it is, the timer callback will re-schedule itself to run
one second in the future. If the migration has already finished, the
monitor lock is released and the user can use it normally.

All these changes should be transparent to the user.

Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2012-03-15 10:39:52 -03:00
Paolo Bonzini 6cc2a4157b qmp: convert blockdev-snapshot-sync to a wrapper around transactions
Simplify the blockdev-snapshot-sync code and gain failsafe operation
by turning it into a wrapper around the new transaction command.  A new
option is also added matching "mode".

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-03-12 15:14:07 +01:00
Gerd Hoffmann 9b9df25a47 suspend: add system_wakeup monitor command
This patch adds the system_wakeup monitor command which will simply
wake up suspended guests.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-02-24 13:36:03 -06:00
Stefan Hajnoczi fb5458cd10 qmp: add query-block-jobs
Add query-block-jobs, which shows the progress of ongoing block device
operations.

Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Acked-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-01-26 14:49:18 +01:00
Stefan Hajnoczi 370521a1d6 qmp: add block_job_cancel command
Add block_job_cancel, which stops an active block streaming operation.
When the operation has been cancelled the new BLOCK_JOB_CANCELLED event
is emitted.

Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Acked-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-01-26 14:49:18 +01:00
Stefan Hajnoczi 2d47c6e9aa qmp: add block_job_set_speed command
Add block_job_set_speed, which sets the maximum speed for a background
block operation.

Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Acked-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-01-26 14:49:17 +01:00
Stefan Hajnoczi 12bd451fe0 qmp: add block_stream command
Add the block_stream command, which starts copy backing file contents
into the image file.  Also add the BLOCK_JOB_COMPLETED QMP event which
is emitted when image streaming completes.  Later patches add control
over the background copy speed, cancelation, and querying running
streaming operations.

Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Acked-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-01-26 14:49:14 +01:00
Luiz Capitulino 80047da59b qapi: Convert block_set_io_throttle
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2012-01-18 10:23:39 -02:00
Luiz Capitulino 333a96ec9f qapi: Convert change
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2012-01-18 10:23:39 -02:00
Luiz Capitulino c245b6a37d qapi: Convert eject
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2012-01-18 10:23:39 -02:00
Luiz Capitulino 9ad5372daa qapi: Convert expire_password
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2012-01-18 10:23:38 -02:00
Luiz Capitulino fbf796fd6f qapi: Convert set_password
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2012-01-18 10:23:38 -02:00