Commit Graph

109 Commits

Author SHA1 Message Date
Sergio Lopez 0ebf007dda hw/i386: Introduce the microvm machine type
microvm is a machine type inspired by Firecracker and constructed
after its machine model.

It's a minimalist machine type without PCI nor ACPI support, designed
for short-lived guests. microvm also establishes a baseline for
benchmarking and optimizing both QEMU and guest operating systems,
since it is optimized for both boot time and footprint.

Signed-off-by: Sergio Lopez <slp@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
2019-10-22 09:39:54 +02:00
Corey Minyard 38033052f6 ipmi: Add an SMBus IPMI interface
Signed-off-by: Corey Minyard <cminyard@mvista.com>
2019-09-20 14:08:10 -05:00
Corey Minyard 12f983c6aa ipmi: Add PCI IPMI interfaces
Pretty straightforward, just hook the current KCS and BT code into
the PCI system with the proper configuration.

Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: M: Marcel Apfelbaum <marcel.apfelbaum@gmail.com>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
2019-09-20 14:08:10 -05:00
Cole Robinson 709ebb9054 hw/i386: Move CONFIG_ACPI_PCI to CONFIG_PC
CONFIG_ACPI_PCI is a hard requirement of acpi-build.c, which is built
unconditionally for x86 target. Putting it in default-configs/ suggests
that it can be easily disabled, which isn't true.

Relocate the symbol with the other acpi-build.c requirements, under
'config PC'. This is similar to what is done for the arm 'virt' machine
type and CONFIG_ACPI_PCI

Signed-off-by: Cole Robinson <crobinso@redhat.com>
Message-Id: <e73e6edff68fd30d69c6a1d02c9ef9192f773c63.1568049871.git.crobinso@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-09-16 12:32:21 +02:00
Wei Yang f13a944ca6 hw/acpi: Consolidate build_mcfg to pci.c
Now we have two identical build_mcfg functions.

Consolidate them in acpi/pci.c.

Signed-off-by: Wei Yang <richardw.yang@linux.intel.com>

v4:
  * ACPI_PCI depends on both ACPI and PCI
  * rebase on latest master, adjust arm Kconfig
v3:
  * adjust changelog based on Igor's suggestion
Message-Id: <20190521062836.6541-2-richardw.yang@linux.intel.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2019-05-29 18:00:57 -04:00
Yang Zhong 58accbc508 i386-softmmu.mak: remove all CONFIG_* except boards definitions
%-softmmu.mak only keep boards definitions in Kconfig mode.

Signed-off-by: Yang Zhong <yang.zhong@intel.com>
Message-Id: <20190123065618.3520-43-yang.zhong@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-03-07 21:45:53 +01:00
Paolo Bonzini dd2356e531 ipmi: express dependencies with kconfig
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Yang Zhong <yang.zhong@intel.com>
Message-Id: <20190123065618.3520-36-yang.zhong@intel.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-03-07 21:45:53 +01:00
Yang Zhong b42075bb77 virtio: express virtio dependencies with Kconfig
Signed-off-by: Yang Zhong <yang.zhong@intel.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20190123065618.3520-42-yang.zhong@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-03-07 21:45:53 +01:00
Yang Zhong ccf222a816 hyperv: express dependencies with kconfig
remove default-configs/hyperv.mak and make dependencies
with Kconfig.

Signed-off-by: Yang Zhong <yang.zhong@intel.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20190123065618.3520-41-yang.zhong@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-03-07 21:45:53 +01:00
Paolo Bonzini 1550b0e6bf i2c: express dependencies with Kconfig
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Yang Zhong <yang.zhong@intel.com>
Acked-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20190123065618.3520-38-yang.zhong@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-03-07 21:45:53 +01:00
Paolo Bonzini 02017ee385 i386: express dependencies with Kconfig
This way, the default-configs file only need to specify the boards
and any optional devices.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Yang Zhong <yang.zhong@intel.com>
Message-Id: <20190123065618.3520-37-yang.zhong@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-03-07 21:45:53 +01:00
Paolo Bonzini a7e2315907 isa: express dependencies with kconfig
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Yang Zhong <yang.zhong@intel.com>
Message-Id: <20190123065618.3520-36-yang.zhong@intel.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-03-07 21:45:53 +01:00
Paolo Bonzini d6e9c470fc build: convert usb.mak to Kconfig
Instead of including the same list of devices for each target,
let the host controllers select CONFIG_USB and make the devices
default to present whenever USB is available.

Done with the following script:
  while read i; do
     i=${i%=y}; i=${i#CONFIG_}
     sed -i -e'/^config '$i'$/!b' -en \
            -e'a\' -e'    default y\' -e'    depends on USB' \
          `grep -lw $i hw/*/Kconfig`
  done < default-configs/usb.mak

followed by adding "select USB" on the host controllers.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Yang Zhong <yang.zhong@intel.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20190123065618.3520-33-yang.zhong@intel.com>
Acked-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-03-07 21:45:53 +01:00
Paolo Bonzini bcb129b315 build: convert sound.mak to Kconfig
There is really nothing special in these devices; they are just
ISA devices.  Instead of including them for each target,
set CONFIG_ISA_BUS to true, and make the devices default to present
whenever ISA is available.  More conversion of ISA devices will
follow.

Done with the following script:

  while read i; do
     i=${i%=y}; i=${i#CONFIG_}
     sed -i -e'/^config '$i'$/!b' -en \
            -e'a\' -e'    default y\' -e'    depends on ISA_BUS' \
          `grep -lw $i hw/*/Kconfig`
  done < default-configs/sound.mak

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20190123065618.3520-32-yang.zhong@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-03-07 21:45:53 +01:00
Paolo Bonzini 7c28b925b7 build: convert pci.mak to Kconfig
Instead of including the same list of devices for each target,
set CONFIG_PCI to true, and make the devices default to present
whenever PCI is available.  However, s390x does not want all the
PCI devices, so there is a separate symbol to enable them.

Done mostly with the following script:

  while read i; do
     i=${i%=y}; i=${i#CONFIG_}
     sed -i -e'/^config '$i'$/!b' -en \
            -e'a\' -e'    default y if PCI_DEVICES\' -e'    depends on PCI' \
          `grep -lw $i hw/*/Kconfig`
  done < default-configs/pci.mak

followed by replacing a few "depends on" clauses with "select"
whenever the symbol is not really related to PCI.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Yang Zhong <yang.zhong@intel.com>
Cc: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20190123065618.3520-31-yang.zhong@intel.com>
Acked-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-03-07 21:45:53 +01:00
Yang Zhong e9947d18df hw/pci/Makefile.objs: make pcie configurable
Make pcie splited from pci and make it configurable.

Signed-off-by: Yang Zhong <yang.zhong@intel.com>
Cc: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20190123065618.3520-30-yang.zhong@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-03-07 21:45:53 +01:00
Paolo Bonzini c3a98aa54c kconfig: introduce CONFIG_TEST_DEVICES
Devices that are mostly used for testing purposes (for example in
endianness-test) will be moved under a new symbol CONFIG_TEST_DEVICES
that can be disabled in the default-configs file.  This makes
it easier to drop this code from QEMU if desirable.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-03-07 21:45:53 +01:00
Paolo Bonzini e0e312f352 build: switch to Kconfig
The make_device_config.sh script is replaced by minikconf, which
is modified to support the same command line as its predecessor.

The roots of the parsing are default-configs/*.mak, Kconfig.host and
hw/Kconfig.  One difference with make_device_config.sh is that all symbols
have to be defined in a Kconfig file, including those coming from the
configure script.  This is the reason for the Kconfig.host file introduced
in the previous patch. Whenever a file in default-configs/*.mak used
$(...) to refer to a config-host.mak symbol, this is replaced by a
Kconfig dependency; this part must be done already in this patch
for bisectability.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Yang Zhong <yang.zhong@intel.com>
Acked-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20190123065618.3520-28-yang.zhong@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-03-07 21:45:53 +01:00
Paolo Bonzini 8e6578831b hw/i2c/Makefile.objs: Create new CONFIG_* variables for EEPROM and ACPI controller
Create separate variables for these components, they are
used in many boards but not all.  This allows finer-grain
selection of the included code with default-configs/*.mak.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20190202072456.6468-27-yang.zhong@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-02-05 16:50:21 +01:00
Paolo Bonzini 80500ce637 hw/i386/Makefile.objs: Build pc_piix* and pc_q35 boards
CONFIG_PIIX and CONFIG_Q35 created for the pc board object files. These
are enabled automatically at default-configs/i386-softmmu.mak and
default-configs/x86_64-softmmu.mak

Signed-off-by: Ákos Kovács <akoskovacs@gmx.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20190202072456.6468-7-yang.zhong@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-02-05 16:50:19 +01:00
Paolo Bonzini 91b82fec16 build: actually use CONFIG_PAM
Do not link it unconditionally into all binaries.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Yang Zhong <yang.zhong@intel.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20190202072456.6468-6-yang.zhong@intel.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-02-05 16:50:19 +01:00
Yang Zhong 5afdd57ca0 hw/pci-host/Makefile.objs: make CONFIGS clear for PCI EXPRESS
Change the CONFIGs for PCI EXPRESS and make module name more
clear for code files.

Signed-off-by: Yang Zhong <yang.zhong@intel.com>
Cc: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20190202072456.6468-5-yang.zhong@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-02-05 16:50:19 +01:00
David Hildenbrand 15cea5ae81 memory-device: introduce separate config option
Some architectures might support memory devices, while they don't
support DIMM/NVDIMM. So let's
- Rename CONFIG_MEM_HOTPLUG to CONFIG_MEM_DEVICE
- Introduce CONFIG_DIMM and use it similarly to CONFIG NVDIMM

CONFIG_DIMM and CONFIG_NVDIMM require CONFIG_MEM_DEVICE.

Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20181005092024.14344-7-david@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2018-10-24 06:44:59 -03:00
Roman Kagan 02ef67240b default-configs: collect CONFIG_HYPERV* in hyperv.mak
Accumulate HYPERV config options in a dedicated file.  There are only
two so far; more will be added later.

Signed-off-by: Roman Kagan <rkagan@virtuozzo.com>
Message-Id: <20180921082041.29380-5-rkagan@virtuozzo.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-10-19 13:44:13 +02:00
Peter Maydell 3788c7b6e5 * Record-replay lockstep execution, log dumper and fixes (Alex, Pavel)
* SCSI fix to pass maximum transfer size (Daniel Barboza)
 * chardev fixes and improved iothread support (Daniel Berrangé, Peter)
 * checkpatch tweak (Eric)
 * make help tweak (Marc-André)
 * make more PCI NICs available with -net or -nic (myself)
 * change default q35 NIC to e1000e (myself)
 * SCSI support for NDOB bit (myself)
 * membarrier system call support (myself)
 * SuperIO refactoring (Philippe)
 * miscellaneous cleanups and fixes (Thomas)
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.22 (GNU/Linux)
 
 iQEcBAABAgAGBQJapqaMAAoJEL/70l94x66DQoUH/Rvg+a8giz/SrEA4P8D3Cb2z
 4GNbNUUoy4oU0ltD5IAMskMwpOsvl1batE0D+pKIlfO9NV4+Cj2kpgo0p9TxoYqM
 VCby3wRtx27zb5nVytC6M++iIKXmeEMqXmFw61I6umddNPSl4IR3hiHEE0DM+7dV
 UPIOvJeEiazyQaw3Iw+ZctNn8dDBKc/+6oxP9xRcYTaZ6hB4G9RZkqGNNSLcJkk7
 R0UotdjzIZhyWMOkjIwlpTF4sWv8gsYUV4bPYKMYho5B0Obda2dBM3I1kpA8yDa/
 xZ5lheOaAVBZvM5aMIcaQPa65MO9hLyXFmhMOgyfpJhLBBz6Qpa4OLLI6DeTN+0=
 =UAgA
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into staging

* Record-replay lockstep execution, log dumper and fixes (Alex, Pavel)
* SCSI fix to pass maximum transfer size (Daniel Barboza)
* chardev fixes and improved iothread support (Daniel Berrangé, Peter)
* checkpatch tweak (Eric)
* make help tweak (Marc-André)
* make more PCI NICs available with -net or -nic (myself)
* change default q35 NIC to e1000e (myself)
* SCSI support for NDOB bit (myself)
* membarrier system call support (myself)
* SuperIO refactoring (Philippe)
* miscellaneous cleanups and fixes (Thomas)

# gpg: Signature made Mon 12 Mar 2018 16:10:52 GMT
# gpg:                using RSA key BFFBD25F78C7AE83
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>"
# gpg:                 aka "Paolo Bonzini <pbonzini@redhat.com>"
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4  E2F7 7E15 100C CD36 69B1
#      Subkey fingerprint: F133 3857 4B66 2389 866C  7682 BFFB D25F 78C7 AE83

* remotes/bonzini/tags/for-upstream: (69 commits)
  tcg: fix cpu_io_recompile
  replay: update documentation
  replay: save vmstate of the asynchronous events
  replay: don't process async events when warping the clock
  scripts/replay-dump.py: replay log dumper
  replay: avoid recursive call of checkpoints
  replay: check return values of fwrite
  replay: push replay_mutex_lock up the call tree
  replay: don't destroy mutex at exit
  replay: make locking visible outside replay code
  replay/replay-internal.c: track holding of replay_lock
  replay/replay.c: bump REPLAY_VERSION again
  replay: save prior value of the host clock
  replay: added replay log format description
  replay: fix save/load vm for non-empty queue
  replay: fixed replay_enable_events
  replay: fix processing async events
  cpu-exec: fix exception_index handling
  hw/i386/pc: Factor out the superio code
  hw/alpha/dp264: Use the TYPE_SMC37C669_SUPERIO
  ...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

# Conflicts:
#	default-configs/i386-softmmu.mak
#	default-configs/x86_64-softmmu.mak
2018-03-16 11:05:03 +00:00
Brijesh Singh a9b4942f48 target/i386: add Secure Encrypted Virtualization (SEV) object
Add a new memory encryption object 'sev-guest'. The object will be used
to create encrypted VMs on AMD EPYC CPU. The object provides the properties
to pass guest owner's public Diffie-hellman key, guest policy and session
information required to create the memory encryption context within the
SEV firmware.

e.g to launch SEV guest
 # $QEMU \
    -object sev-guest,id=sev0 \
    -machine ....,memory-encryption=sev0

Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-03-13 12:04:03 +01:00
Paolo Bonzini 8cc436d9c5 hw/i386: make IOMMUs configurable via default-configs/
Allow distributions to disable the Intel and/or AMD IOMMU devices.

Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-03-12 16:12:46 +01:00
Thomas Huth 50876ead08 i2c: Add a CONFIG_I2C master switch to the configuration files
The i2c core and the at24c EEPROM should only be compiled and linked
on the machines that support i2c. Otherwise it's quite strange to see
the at24c-eeprom to be "available" on qemu-system-s390x for example.

Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <1516634853-15883-1-git-send-email-thuth@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-02-05 18:09:45 +01:00
Marc-André Lureau 4ab6cb4c62 tpm: add CRB device
tpm_crb is a device for TPM 2.0 Command Response Buffer (CRB)
Interface as defined in TCG PC Client Platform TPM Profile (PTP)
Specification Family “2.0” Level 00 Revision 01.03 v22.

The PTP allows device implementation to switch between TIS and CRB
model at run time, but given that CRB is a simpler device to
implement, I chose to implement it as a different device.

The device doesn't implement other locality than 0 for now (my laptop
TPM doesn't either, so I assume this isn't so bad)

Tested with some success with Linux upstream and Windows 10, seabios &
modified ovmf. The device is recognized and correctly transmit
command/response with passthrough & emu. However, we are missing PPI
ACPI part atm.

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
2018-01-29 14:22:50 -05:00
Marc-André Lureau f865da7c36 build-sys: restrict vmcoreinfo to fw_cfg+dma capable targets
vmcoreinfo is built for all targets. However, it requires fw_cfg with
DMA operations support (write operation). Restrict vmcoreinfo exposure
to architectures that are supporting FW_CFG_DMA, that is arm-virt and
x86 only atm.

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb@linux.vnet.ibm.com>
Tested-by: Daniel Henrique Barboza <danielhb@linux.vnet.ibm.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2017-11-16 17:46:53 +02:00
Thomas Huth 03bf6b5c08 default-configs: Enable CONFIG_VMXNET3_PCI only on x86
The device can not be instantiated on many non-x86 and just prints
some error messages, e.g.:

$ qemu-system-ppc64 -device vmxnet3 -M g3beige
[vmxnet3][WR][vmxnet3_init_msix]: Failed to initialize MSI-X, error -95
[vmxnet3][WR][vmxnet3_pci_realize]: Failed to initialize MSI-X, configuration is inconsistent.

Since vmxnet3 is a para-virtualized device that is only useful on x86,
it should also only be enabled on the x86 targets.

Reviewed-by: Dmitry Fleytman <dmitry@daynix.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
2017-10-16 13:29:49 +02:00
Anthony Xu 28b99f473b move xen-mapcache.c to hw/i386/xen/
move xen-mapcache.c to hw/i386/xen/

Signed-off -by: Anthony Xu <anthony.xu@intel.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
2017-04-25 11:04:34 -07:00
Ben Warren d03637bcfb ACPI: Add Virtual Machine Generation ID support
This implements the VM Generation ID feature by passing a 128-bit
GUID to the guest via a fw_cfg blob.
Any time the GUID changes, an ACPI notify event is sent to the guest

The user interface is a simple device with one parameter:
 - guid (string, must be "auto" or in UUID format
   xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx)

Signed-off-by: Ben Warren <ben@skyportsystems.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2017-03-02 07:14:27 +02:00
David Gibson 1401c322c8 Split serial-isa into its own config option
At present, the core device model code for 8250-like serial ports
(serial.c) and the code for serial ports attached to ISA-style legacy IO
(serial-isa.c) are both controlled by the CONFIG_SERIAL variable.

There are lots and lots of embedded platforms that have 8250-like serial
ports but have never had anything resembling ISA legacy IO.  Therefore,
split serial-isa into its own CONFIG_SERIAL_ISA option so it can be
disabled for platforms where it's not appropriate.

For now, I enabled CONFIG_SERIAL_ISA in every default-config where
CONFIG_SERIAL is enabled, excepting microblaze, or32, and xtensa.  As best
as I can tell, those platforms never used legacy ISA, and also don't
include PCI support (which would allow connection of a PCI->ISA bridge
and/or a southbridge including legacy ISA serial ports).

Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
2017-02-06 12:33:21 +11:00
Peter Maydell 5459ef3bff ppc patch queue 2017-02-02
This obsoletes ppc-for-2.9-20170112, which had a MacOS build bug.
 
 This is a long overdue ppc pull request for qemu-2.9.  It's been a
 long time coming due to some holidays and inconveniently timed
 problems with testing.  So, there's a lot in here:
 
     * More POWER9 instruction implementations for TCG
     * The simpler parts of my CPU compatibility mode cleanup
         * This changes behaviour to prefer compatibility modes over
           "raW" mode for new machine type versions
     * New "40p" machine type which is essentially a modernized and
       cleaned up "prep".  The intention is that it will replace "prep"
       once it has some more testing and polish.
     * Add pseries-2.9 machine type
     * Implement H_SIGNAL_SYS_RESET hypercall
     * Consolidate the two alternate CPU init paths in pseries by
       making it always go through CPU core objects to initialize CPU
     * A number of bugfixes and cleanups
     * Stop the guest timebase when the guest is stopped under KVM.
       This makes the guest system clock also stop when paused, which
       matches the x86 behaviour.
     * Some preliminary cleanups leading towards implementation of the
       POWER9 MMU.
 
 There are also some changes not strictly related to ppc code, but for
 its benefit:
 
     * Limit the pxi-expander-bridge (PXB) device to x86 guests only
       (it's essentially a hack to work around historical x86
       limitations)
     * Some additions to the 128-bit math in host_utils, necessary for
       some of the new instructions.
     * Revise a number of qtests and enable them for ppc
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iQIcBAABCAAGBQJYko4AAAoJEGw4ysog2bOStEYQAIk0Pd6ifZzJUcTWQaR8+AZ7
 nTbzQyWtSHqSAiwBNsykJMFXV1liZVglf2e+VBsrVOwKoU50VOyVm5LspG2z1h8N
 Rxe4FGA2MA//2F3+9/AP8Oe3RdsClNCDaXAVuCFRP4xQWxqqwwasChDeS4Ph/cZq
 CXnlhKTpk9v5vSCsr64bUOSYh3RPumnQepiBgT82hOo7R+VaJ79AFbTeCYKkd0hY
 Sq8g3mg0zOX1ekNXPk1h8oZWqkoZGbqKiXgoy/evGXWURVzTSJO6VTyM65tdwWB7
 Zds77gYAYCIYKq+Iwv4iBCmo4KJofjKQcQepQUr+eGDv9syXebtp6fY0btnIS+DX
 uGzzaixZNms9r2+FAiIlKwIeQgQvl76lYEGmvBrbrgSOyA/7GAkOId0E0Ul6D5LW
 EJSwk9ZDbyE0JBEq6Bx+LClpwye+bpdScU26djQTTcWpFApIeJTyG9V6b1xwulVZ
 rw68ZvfMYxktkvhTbEtvk2O9YZI5eQStBJkmJXeOiOduiP93aiC82MM1Jp+82Q1E
 4qRVvCpGTwzF3GLFciUKAqmwfYxByo4G0/dwG8qw6WNEemLyXFHV5TkzLhgwl3kC
 gDGl5AdH4MXj8NRjuHcDiGXfePBCD578dmz4xo5ZLA2yBavxkRzM8QsEUmD8hf5w
 jhLgyKt0G2hNNtOnGOdG
 =vLVl
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/dgibson/tags/ppc-for-2.9-20170202' into staging

ppc patch queue 2017-02-02

This obsoletes ppc-for-2.9-20170112, which had a MacOS build bug.

This is a long overdue ppc pull request for qemu-2.9.  It's been a
long time coming due to some holidays and inconveniently timed
problems with testing.  So, there's a lot in here:

    * More POWER9 instruction implementations for TCG
    * The simpler parts of my CPU compatibility mode cleanup
        * This changes behaviour to prefer compatibility modes over
          "raW" mode for new machine type versions
    * New "40p" machine type which is essentially a modernized and
      cleaned up "prep".  The intention is that it will replace "prep"
      once it has some more testing and polish.
    * Add pseries-2.9 machine type
    * Implement H_SIGNAL_SYS_RESET hypercall
    * Consolidate the two alternate CPU init paths in pseries by
      making it always go through CPU core objects to initialize CPU
    * A number of bugfixes and cleanups
    * Stop the guest timebase when the guest is stopped under KVM.
      This makes the guest system clock also stop when paused, which
      matches the x86 behaviour.
    * Some preliminary cleanups leading towards implementation of the
      POWER9 MMU.

There are also some changes not strictly related to ppc code, but for
its benefit:

    * Limit the pxi-expander-bridge (PXB) device to x86 guests only
      (it's essentially a hack to work around historical x86
      limitations)
    * Some additions to the 128-bit math in host_utils, necessary for
      some of the new instructions.
    * Revise a number of qtests and enable them for ppc

# gpg: Signature made Thu 02 Feb 2017 01:40:16 GMT
# gpg:                using RSA key 0x6C38CACA20D9B392
# gpg: Good signature from "David Gibson <david@gibson.dropbear.id.au>"
# gpg:                 aka "David Gibson (Red Hat) <dgibson@redhat.com>"
# gpg:                 aka "David Gibson (ozlabs.org) <dgibson@ozlabs.org>"
# gpg:                 aka "David Gibson (kernel.org) <dwg@kernel.org>"
# Primary key fingerprint: 75F4 6586 AE61 A66C C44E  87DC 6C38 CACA 20D9 B392

* remotes/dgibson/tags/ppc-for-2.9-20170202: (107 commits)
  hw/ppc/pnv: Use error_report instead of hw_error if a ROM file can't be found
  ppc/kvm: Handle the "family" CPU via alias instead of registering new types
  target/ppc/mmu_hash64: Fix incorrect shift value in amr calculation
  target/ppc/mmu_hash64: Fix printing unsigned as signed int
  tcg/POWER9: NOOP the cp_abort instruction
  target/ppc/debug: Print LPCR register value if register exists
  target-ppc: Add xststdc[sp, dp, qp] instructions
  target-ppc: Add xvtstdc[sp,dp] instructions
  target-ppc: Add MMU model check for booke machines
  ppc: switch to constants within BUILD_BUG_ON
  target/ppc/cpu-models: Fix/remove bad CPU aliases
  target/ppc: Remove unused POWERPC_FAMILY(POWER)
  spapr: clock should count only if vm is running
  ppc: Remove unused function cpu_ppc601_rtc_init()
  target/ppc: Add pcr_supported to POWER9 cpu class definition
  powerpc/cpu-models: rename ISAv3.00 logical PVR definition
  target-ppc: Add xvcv[hpsp, sphp] instructions
  target-ppc: Add xsmulqp instruction
  target-ppc: Add xsdivqp instruction
  target-ppc: Add xscvsdqp and xscvudqp instructions
  ...

# Conflicts:
#	hw/pci-bridge/Makefile.objs

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-02-02 18:48:06 +00:00
Marcel Apfelbaum 9d5154d753 hw/pcie: Introduce a base class for PCI Express Root Ports
The 'base' PCI Express Root Port includes
the common code to be re-used for all
Root Ports implementations. Most of the code
was taken from the current implementation
of Intel's IOH 3420 Root Port.

Signed-off-by: Marcel Apfelbaum <marcel@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2017-02-01 03:37:17 +02:00
David Gibson ef29122649 pxb: Restrict to x86
The PCI Expander Bridge (PXB) device is essentially a hack to allow
different PCIe devices to be assigned to different NUMA nodes on x86.  Each
PXB is sort-of a separate PCI host bridge, except that its config space
is shared with the config space of the main PCI host bridge, rather than
being independent.

This is only necessary if the platform doesn't (easily) allow truly
independent PCI host bridges.  AFAIK that's just x86.

This patch makes it possible to configure PXB out of the build, and adjusts
the default configs so it's only included on x86 targets.

Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
2017-01-31 10:10:14 +11:00
Daniel P. Berrange e270d00afa default-configs: remove CONFIG_PIIX_PCI
The CONFIG_PIIX_PCI=y setting was added in

  commit 70615c38de
  Author: Blue Swirl <blauwirbel@gmail.com>
  Date:   Mon Mar 22 20:18:40 2010 +0000

    Compile sound devices only once

but nothing in that commit, nor anything pre-existing,
ever referenced CONFIG_PIIX_PCI.

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-Id: <1473096320-1638-4-git-send-email-berrange@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-09-13 19:09:42 +02:00
Daniel P. Berrange a3b6e2bb71 default-configs: remove CONFIG_PAM
The CONFIG_PAM=y setting was added in

  commit c0907c9e64
  Author: Paolo Bonzini <pbonzini@redhat.com>
  Date:   Tue Feb 5 15:06:20 2013 +0100

    hw: move PCI bridges to hw/pci-* or hw/ARCH

but nothing in that commit, nor anything pre-existing,
ever referenced CONFIG_PAM.

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-Id: <1473096320-1638-2-git-send-email-berrange@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-09-13 19:09:41 +02:00
Xiao Guangrong 87252e1b61 nvdimm acpi: build ACPI NFIT table
NFIT is defined in ACPI 6.0: 5.2.25 NVDIMM Firmware Interface Table (NFIT)

Currently, we only support PMEM mode. Each device has 3 structures:
- SPA structure, defines the PMEM region info

- MEM DEV structure, it has the @handle which is used to associate specified
  ACPI NVDIMM  device we will introduce in later patch.
  Also we can happily ignored the memory device's interleave, the real
  nvdimm hardware access is hidden behind host

- DCR structure, it defines vendor ID used to associate specified vendor
  nvdimm driver. Since we only implement PMEM mode this time, Command
  window and Data window are not needed

The NVDIMM functionality is controlled by the parameter, 'nvdimm', which
is introduced for the machine, there is a example to enable it:
-machine pc,nvdimm -m 8G,maxmem=100G,slots=100  -object \
memory-backend-file,id=mem1,share,mem-path=/tmp/nvdimm1,size=10G -device \
nvdimm,memdev=mem1,id=nv1

It is disabled on default

Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Xiao Guangrong <guangrong.xiao@linux.intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2015-12-22 18:39:20 +02:00
Xiao Guangrong 5c42eef243 nvdimm: implement NVDIMM device abstract
Introduce "nvdimm" device which is based on pc-dimm device type

Currently, nothing is specific for nvdimm but hotplug is disabled

Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Xiao Guangrong <guangrong.xiao@linux.intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2015-12-22 18:39:20 +02:00
Corey Minyard a9b74079cb ipmi: Add a BT low-level interface
This provides the simulation of the BT hardware interface for
IPMI.

Signed-off-by: Corey Minyard <cminyard@mvista.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2015-12-22 18:39:19 +02:00
Corey Minyard 0719029c47 ipmi: Add an ISA KCS low-level interface
This provides the simulation of the KCS hardware interface.

Signed-off-by: Corey Minyard <cminyard@mvista.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2015-12-22 18:39:19 +02:00
Corey Minyard 67aa56fc03 ipmi: Add an external connection simulation interface
This adds an interface for IPMI that connects to a remote
BMC over a chardev (generally a TCP socket).  The OpenIPMI
lanserv simulator describes this interface, see that for
interface details.

Signed-off-by: Corey Minyard <cminyard@mvista.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2015-12-22 18:39:19 +02:00
Corey Minyard 8bfffbccad ipmi: Add a local BMC simulation
This provides a minimal local BMC, basically enough to comply with the
spec and provide a complete watchdog timer (including a sensor, SDR,
and event).

Signed-off-by: Corey Minyard <cminyard@mvista.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2015-12-22 18:39:19 +02:00
Corey Minyard 23076bb34b Add a base IPMI interface
Add the basic IPMI types and infrastructure to QEMU.  Low-level
interfaces and simulation interfaces will register with this; it's
kind of the go-between to tie them together.

Signed-off-by: Corey Minyard <cminyard@mvista.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2015-12-22 18:39:19 +02:00
Andrey Smetanin b67dbb7070 hw/misc: Hyper-V test device 'hyperv-testdev'
'hyperv-testdev' will be used by kvm-unit-tests
to setup Hyper-V SynIC SINT's routing and to inject
Hyper-V SynIC SINT's.

Hyper-V test device is ISA type device that creates 0x3000
IO memory region and catches write access into it. Every
write operation data decoded into ctl code and parameters
for Hyper-V test device.

Signed-off-by: Andrey Smetanin <asmetanin@virtuozzo.com>
Reviewed-by: Roman Kagan <rkagan@virtuozzo.com>
Signed-off-by: Denis V. Lunev <den@openvz.org>
CC: Paolo Bonzini <pbonzini@redhat.com>
CC: Richard Henderson <rth@twiddle.net>
CC: Eduardo Habkost <ehabkost@redhat.com>
CC: "Andreas Färber" <afaerber@suse.de>
CC: Marcelo Tosatti <mtosatti@redhat.com>
CC: Roman Kagan <rkagan@virtuozzo.com>
CC: Denis V. Lunev <den@openvz.org>
CC: kvm@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-12-17 15:24:35 +01:00
Zhu Guihua dfeb8679db icc_bus: drop the unused files
ICC bus impl has been droped, so all icc related files are not useful
any more; delete them.

Signed-off-by: Zhu Guihua <zhugh.fnst@cn.fujitsu.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2015-10-02 16:22:02 -03:00
Gerd Hoffmann af5b83d7d5 virtio-vga: enable for i386
This one just syncs x86_64 and i386.

Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: qemu-trivial@nongnu.org
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2015-09-11 12:18:37 +03:00
Wei Huang 60d8f328b8 smbios: move smbios code into a common folder
To share smbios among different architectures, this patch moves SMBIOS
code (smbios.c and smbios.h) from x86 specific folders into new
hw/smbios directories. As a result, CONFIG_SMBIOS=y is defined in
x86 default config files.

Acked-by: Gabriel Somlo <somlo@cmu.edu>
Tested-by: Gabriel Somlo <somlo@cmu.edu>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Leif Lindholm <leif.lindholm@linaro.org>
Signed-off-by: Wei Huang <wei@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2015-08-13 14:08:30 +03:00