Commit Graph

56 Commits

Author SHA1 Message Date
Paolo Bonzini afbe70535f main-loop: introduce qemu_mutex_iothread_locked
This function will be used to avoid recursive locking of the iothread lock
whenever address_space_rw/ld*/st* are called with the BQL held, which is
almost always the case.

Tracking whether the iothread is owned is very cheap (just use a TLS
variable) but requires some care because now the lock must always be
taken with qemu_mutex_lock_iothread().  Previously this wasn't the case.
Outside TCG mode this is not a problem.  In TCG mode, we need to be
careful and avoid the "prod out of compiled code" step if already
in a VCPU thread.  This is easily done with a check on current_cpu,
i.e. qemu_in_vcpu_thread().

Hopefully, multithreaded TCG will get rid of the whole logic to kick
VCPUs whenever an I/O event occurs!

Cc: Frederic Konrad <fred.konrad@greensocs.com>
Message-Id: <1434646046-27150-3-git-send-email-pbonzini@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-07-01 15:45:50 +02:00
Markus Armbruster cc7a8ea740 Include qapi/qmp/qerror.h exactly where needed
In particular, don't include it into headers.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
2015-06-22 18:20:41 +02:00
Markus Armbruster 4629ed1e98 qerror: Finally unused, clean up
Remove it except for two things in qerror.h:

* Two #include to be cleaned up separately to avoid cluttering this
  patch.

* The QERR_ macros.  Mark as obsolete.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
2015-06-22 18:20:40 +02:00
Markus Armbruster c6bd8c706a qerror: Clean up QERR_ macros to expand into a single string
These macros expand into error class enumeration constant, comma,
string.  Unclean.  Has been that way since commit 13f59ae.

The error class is always ERROR_CLASS_GENERIC_ERROR since the previous
commit.

Clean up as follows:

* Prepend every use of a QERR_ macro by ERROR_CLASS_GENERIC_ERROR, and
  delete it from the QERR_ macro.  No change after preprocessing.

* Rewrite error_set(ERROR_CLASS_GENERIC_ERROR, ...) into
  error_setg(...).  Again, no change after preprocessing.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
2015-06-22 18:20:40 +02:00
Fam Zheng f4d248bdc3 iohandler: Change return type of qemu_set_fd_handler to "void"
Signed-off-by: Fam Zheng <famz@redhat.com>
Message-id: 1433400324-7358-14-git-send-email-famz@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-06-12 13:26:21 +01:00
Fam Zheng 6484e42247 main-loop: Drop qemu_set_fd_handler2
All users are converted to qemu_set_fd_handler now, drop
qemu_set_fd_handler2 and IOHandlerRecord.fd_read_poll.

Signed-off-by: Fam Zheng <famz@redhat.com>
Message-id: 1433400324-7358-9-git-send-email-famz@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-06-12 13:26:21 +01:00
Fam Zheng 0bc12c4f7e stubs: Add qemu_set_fd_handler
Some qemu_set_fd_handler2 stub callers will be converted to
call qemu_set_fd_handler, add this stub for them before making the
change.

Signed-off-by: Fam Zheng <famz@redhat.com>
Message-id: 1433400324-7358-2-git-send-email-famz@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-06-12 13:26:20 +01:00
Markus Armbruster 489653b5db monitor: Change return type of monitor_cur_is_qmp() to bool
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
2015-06-02 10:07:16 +02:00
Peter Maydell 0048fa6c80 pci, pc, virtio fixes and cleanups
A bunch of fixes all over the place.
 All of ACPI refactoring has been merged.
 Legacy pci commands have been dropped.
 virtio header cleanup
 initial patches from virtio-1.0 branch
 
 Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQEcBAABAgAGBQJU/CoXAAoJECgfDbjSjVRpX7EH/RMmgtsDO4wvqJu++lHvkB/q
 kSaXZYTpJTo0i5JE7n2brwuXA4902tTg9g5TMUpGPh9Pt2QRg7RTgGC1vqZyOBos
 MPw+4BO2v66S6qgX7bOf222z7r64cHTY7pLkQlrfD4usPlu2eusZ64UTW6Ru51fW
 WF9E9aunbl+HnuCGq6Iez3sCLscTBJpU/lEr6oSyHhuq3aa0CjjraEeV0E/QcwJG
 HTUeFymL8NFvlXZblsLI++VOv7Mxpi6yiCQ5XoKpFgGMvidwo41Aso6gB3ySGxOd
 w8O3Nbu77Iw/StDRNCg/5/GapabMKh2bE4UCsYY5OS63ZtD0fl0CCblhzm/ZFPw=
 =LY/j
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging

pci, pc, virtio fixes and cleanups

A bunch of fixes all over the place.
All of ACPI refactoring has been merged.
Legacy pci commands have been dropped.
virtio header cleanup
initial patches from virtio-1.0 branch

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

* remotes/mst/tags/for_upstream: (130 commits)
  acpi: drop unused code
  aml-build: comment fix
  acpi-build: fix typo in comment
  acpi: update generated files
  vhost user:support vhost user nic for non msi guests
  aml-build: fix build for glib < 2.22
  acpi: update generated files
  Makefile.target: binary depends on config-devices
  acpi-test-data: update after pci rewrite
  acpi, mem-hotplug: use PC_DIMM_SLOT_PROP in acpi_memory_plug_cb().
  pci-hotplug-old: Has been dead for five major releases, bury
  pci: Give a few helpers internal linkage
  acpi: make build_*() routines static to aml-build.c
  pc: acpi: remove not used anymore ssdt-[misc|pcihp].hex.generated blobs
  pc: acpi-build: drop template patching and create PCI bus tree dynamically
  tests: ACPI: update pc/SSDT.bridge due to new alg of PCI tree creation
  pc: acpi-build: simplify PCI bus tree generation
  tests: add ACPI blobs for qemu with bridge cases
  tests: bios-tables-test: add support for testing bridges
  tests: ACPI test blobs update due to PCI0._CRS changes
  ...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

Conflicts:
	hw/pci/pci-hotplug-old.c
2015-03-09 09:14:28 +00:00
zhanghailiang 87a45cfee6 pc-dimm: add a function to calculate VM's current RAM size
The global parameter 'ram_size' does not take into account
the hotplugged memory.

In some codes, we use 'ram_size' as current VM's real RAM size,
which is not correct.

Add function 'get_current_ram_size' to calculate VM's current RAM size,
it will enumerate present memory devices and also plus ram_size.

Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2015-03-04 13:00:04 -05:00
Markus Armbruster f51074cdc6 pci-hotplug-old: Has been dead for five major releases, bury
Commit 79ca616 (v1.6.0) accidentally disabled legacy x86-only HMP
commands pci_add, pci_del: it defined CONFIG_PCI_HOTPLUG only as make
variable, not as preprocessor macro, killing the code conditional on
defined(CONFIG_PCI_HOTPLUG_OLD).

In all this time, nobody reported the loss.  I only noticed it when I
tried to test some error reporting change that forced me to touch this
old crap again.

Fun: git-log hw/pci/pci-hotplug-old.c shows our faith in the backward
compatibility god has been strong enough to sacrifice at its altar
about a dozen times, but not strong enough to even once verify the
legacy feature's still there, let alone works.

Remove the commands along with the code backing them.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2015-03-01 12:37:54 +01:00
Stefan Weil 2822c1b65b stubs: Fix warning caused by missing include statement
Warning from the Sparse static analysis tool:

stubs/qtest.c:14:6:
 warning: symbol 'qtest_allowed' was not declared. Should it be static?

Add the missing include statement which declares qtest_allowed.

Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2015-02-10 10:26:05 +03:00
Markus Armbruster 8fb3c76c94 block: Code motion to get rid of stubs/blockdev.c
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Benoît Canet <benoit.canet@nodalink.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-10-20 13:41:26 +02:00
Markus Armbruster 3ae59580a0 block: Keep DriveInfo alive until BlockDriverState dies
If the BDS's refcnt > 0, drive_del() destroys the DriveInfo, but not
the BDS.  This can happen in three places:

* Device model destruction during unplug: blockdev_auto_del()

* Xen IDE unplug: pci_piix3_xen_ide_unplug()

* drive_del command when no device model is attached: do_drive_del()

The other callers of drive_del are on error paths where refcnt == 1.

If the user somehow manages to plug in a device model using a BDS that
has gone through drive_del(), the legacy configuration passed in
DriveInfo doesn't reach the device model, and automatic deletion on
unplug doesn't work.  Worse, some device models such as scsi-disk
crash when DriveInfo doesn't exist.

This is theoretical; I didn't research an actual reproducer. The problem
was introduced when we replaced DriveInfo reference counting by BDS
reference counting in commit a94a3fa..fa510eb.

Fix by keeping DriveInfo alive until its BDS dies.

This affects qemu_drive_opts: now you can't reuse the same ID for new
drive options until the BDS dies.  Before, you could, but since the
code always attempts to create a BDS with the same ID next, the
enclosing operation "create a new drive" failed anyway.  Different
error path, same result.

Unfortunately, the fix involves use of blockdev.c stuff from block.c,
which is a layering violation.  Fortunately, my forthcoming
BlockBackend work will get rid of it again.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Benoît Canet <benoit.canet@nodalink.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-09-25 15:24:14 +02:00
Michael S. Tsirkin b3dd1b8c29 monitor: fix use after free
The function monitor_fdset_dup_fd_find_remove() references member of
'mon_fdset' which - when remove flag is set - may be freed in function
monitor_fdset_cleanup().
remove is set by monitor_fdset_dup_fd_remove which in practice
does not need the returned value, so make it void,
and return -1 from monitor_fdset_dup_fd_find_remove.

Reported-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2014-08-18 14:39:10 -04:00
Paolo Bonzini 5692399f0a backends: Introduce chr-testdev
From: Paolo Bonzini <pbonzini@redhat.com>

chr-testdev enables a virtio serial channel to be used for guest
initiated qemu exits. hw/misc/debugexit already enables guest
initiated qemu exits, but only for PC targets. chr-testdev supports
any virtio-capable target. kvm-unit-tests/arm is already making use
of this backend.

Currently there is a single command implemented, "q".  It takes a
(prefix) argument for the exit code, thus an exit is implemented by
writing, e.g. "1q", to the virtio-serial port.

It can be used as:
   $QEMU ... \
     -device virtio-serial-device \
     -device virtserialport,chardev=ctd -chardev testdev,id=ctd

or, use:
   $QEMU ... \
     -device virtio-serial-device \
     -device virtconsole,chardev=ctd -chardev testdev,id=ctd

to bind it to virtio-serial port0.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-08-06 17:53:05 +02:00
Peter Maydell 089a39486f Merge remote-tracking branch 'remotes/qmp-unstable/queue/qmp' into staging
* remotes/qmp-unstable/queue/qmp: (43 commits)
  monitor: protect event emission
  monitor: protect outbuf and mux_out with mutex
  qemu-char: make writes thread-safe
  qemu-char: move pty_chr_update_read_handler around
  qemu-char: do not call chr_write directly
  qemu-char: introduce qemu_chr_alloc
  qapi event: clean up
  qapi event: convert QUORUM events
  qapi event: convert GUEST_PANICKED
  qapi event: convert BALLOON_CHANGE
  qmp: convert ACPI_DEVICE_OST event
  qapi event: convert SPICE events
  qapi event: convert VNC events
  qapi event: convert NIC_RX_FILTER_CHANGED
  qapi event: convert other BLOCK_JOB events
  qapi event: convert BLOCK_IMAGE_CORRUPTED
  qapi event: convert BLOCK_IO_ERROR and BLOCK_JOB_ERROR
  qapi event: convert DEVICE_TRAY_MOVED
  qapi event: convert DEVICE_DELETED
  qapi event: convert WATCHDOG
  ...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-06-24 13:06:13 +01:00
Wenchao Xia 751751732c qapi event: clean up
Signed-off-by: Wenchao Xia <wenchaoqemu@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2014-06-23 11:12:28 -04:00
Nikolay Nikolaev 1dc75c6d74 libqemustub: add more stubs for qemu-char
Additional stubs:
 - chr_baum_init
 - qemu_chr_open_spice_vmc
 - qemu_chr_open_spice_port

Signed-off-by: Nikolay Nikolaev <n.nikolaev@virtualopensystems.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-06-23 17:37:59 +03:00
Peter Maydell d9c1647d89 Block pull request
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQEcBAABAgAGBQJTp+sdAAoJEJykq7OBq3PIzoEH/RIaGU7Sg9jxf1O30if5Ilb2
 jw+r0DkYxNiD6qj8DWHT7xnqdJvSYuHz1h8hWth+JqHTNrdQhm9pJWi403WigNmD
 am7NIZQBE7x3koX5gwP4jzlpi7hRFq2BNd17E4KRqvFEUETjKVkY0AsiwWAKI9/4
 i/zDXhj8beKPkHftz4fOtvN+NsKr+8icTmst796J28Eb82+pshqKxUICksE4DIR8
 zH97TsuGAzZelrxnMewEj/ntqj0qHqxdyHq5VvQB5aBa0hp45WifcbWbI7j3Bgi1
 K1ujlC2jmnVLL6DkivMT5TlJjsb2XXK/MWVneaUJU31qS3ivbD/o0SOqa1ca4aM=
 =2s4u
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/stefanha/tags/block-pull-request' into staging

Block pull request

# gpg: Signature made Mon 23 Jun 2014 09:53:49 BST using RSA key ID 81AB73C8
# gpg: Good signature from "Stefan Hajnoczi <stefanha@redhat.com>"
# gpg:                 aka "Stefan Hajnoczi <stefanha@gmail.com>"

* remotes/stefanha/tags/block-pull-request:
  block: asynchronously stop the VM on I/O errors
  vl: allow other threads to do qemu_system_vmstop_request
  sheepdog: fix NULL dereference in sd_create
  QemuOpts: check NULL opts in qemu_opt_get functions
  block: m25p80: Support read only bdrvs.
  block: m25p80: sync_page(): Deindent function body.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-06-23 12:55:22 +01:00
Michael S. Tsirkin 3840f84290 console: move chardev declarations to sysemu/char.h
move generic chardev APIs to sysemu/char.h, to make them available to
callers which can not depend on the whole of ui/console.h.
This fixes a build error on systems without pixman-devel:

./configure --disable-tools --disable-docs --target-list=arm-linux-user
...
pixman            none
...
make
...
In file included from
/data/home/nchip/linaro/qemu/include/ui/console.h:4:0,
                 from /data/home/nchip/linaro/qemu/stubs/vc-init.c:2:
/data/home/nchip/linaro/qemu/include/ui/qemu-pixman.h:14:20: fatal
error: pixman.h: No such file or directory
 #include <pixman.h>
                    ^
compilation terminated.

Reported-by: Riku Voipio <riku.voipio@iki.fi>
Tested-by: Riku Voipio <riku.voipio@iki.fi>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Message-id: 1403508500-32691-1-git-send-email-mst@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-06-23 10:56:20 +01:00
Paolo Bonzini 2bd3bce8ef block: asynchronously stop the VM on I/O errors
With virtio-blk dataplane, I/O errors might occur while QEMU is
not in the main I/O thread.  However, it's invalid to call vm_stop
when we're neither in a VCPU thread nor in the main I/O thread,
even if we were to take the iothread mutex around it.

To avoid this problem, we can raise a request to the main I/O thread,
similar to what QEMU does when vm_stop is called from a CPU thread.
We know that bdrv_error_action is called from an AIO callback, and
the moment at which the callback will fire is not well-defined; it
depends on the moment at which the disk or OS finishes the operation,
which can happen at any time.  Note that QEMU is certainly not in a CPU
thread and we do not need to call cpu_stop_current() like vm_stop() does.

However, we need to ensure that any action taken by management will
result in correct detection of the error _and_ a running VM.  In particular:

- the event must be raised after the iostatus has been set, so that
"info block" will return an iostatus that matches the event.

- the VM must be stopped after the iostatus has been set, so that
"info block" will return an iostatus that matches the runstate.

The ordering between the STOP and BLOCK_IO_ERROR events is preserved;
BLOCK_IO_ERROR is documented to come first.

This makes bdrv_error_action() thread safe (assuming QMP events are,
which is attacked by a separate series).

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-06-23 16:36:13 +08:00
Igor Mammedov 6f2e27301d qmp: add query-memory-devices command
... allowing to get state of present memory devices.
Currently implemented only for PCDIMMDevice.

Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-06-19 18:44:22 +03:00
Nikolay Nikolaev a77e6b14b4 Add qtest for vhost-user
This test creates a 'server' chardev to listen for vhost-user messages.
Once VHOST_USER_SET_MEM_TABLE is received it mmaps each received region,
and read 1k bytes from it. The read data is compared to data from readl.

The test requires hugetlbfs to be already mounted and writable. The mount
point defaults to '/hugetlbfs' and can be specified via the environment
variable QTEST_HUGETLBFS_PATH.

The rom pc-bios/pxe-virtio.rom is used to instantiate a virtio pcicontroller.

Signed-off-by: Antonios Motakis <a.motakis@virtualopensystems.com>
Signed-off-by: Nikolay Nikolaev <n.nikolaev@virtualopensystems.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

MST: fix up coding style
MST: disable vhost test temporarily

This test needs a bit more work: issues have been
found on legacy systems, disable it for now to
avoid false positives for people.
Will re-enable after issues are addressed.

Reported-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-06-19 18:44:18 +03:00
Nikolay Nikolaev 07a32d6b96 libqemustub: add stubs to be able to use qemu-char.c
chardev depends on lots of external symbols that are not necessarily
needed to be able to use, for example, 'socket chardev'. So add stubs
for these functions:

 - bdrv_commit_all
 - qemu_chr_open_msmouse
 - is_daemonized
 - qemu_add_machine_init_done_notifier
 - monitor_init
 - qemu_notify_event
 - vc_init

and this array:

 - serial_hds

Signed-off-by: Antonios Motakis <a.motakis@virtualopensystems.com>
Signed-off-by: Nikolay Nikolaev <n.nikolaev@virtualopensystems.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-06-19 18:44:18 +03:00
Bharata B Rao acb0ef5801 dump: Make DumpState and endian conversion routines available for arch-specific dump code
Make DumpState and endian conversion routines available for arch-specific dump
code by moving into dump.h. DumpState will be needed by arch-specific dump
code to access target endian information from DumpState->ArchDumpInfo. Also
break the dependency of dump.h from stubs/dump.c by creating a separate
dump-arch.h.

This patch doesn't change any functionality.

Signed-off-by: Bharata B Rao <bharata@linux.ibm.com>
[ rebased on top of current master branch,
  renamed endian helpers to cpu_to_dump{16,32,64},
  pass a DumpState * argument to endian helpers,
  Greg Kurz <gkurz@linux.vnet.ibm.com> ]
Signed-off-by: Greg Kurz <gkurz@linux.vnet.ibm.com>
[agraf: fix to apply]
Signed-off-by: Alexander Graf <agraf@suse.de>
2014-06-16 13:24:36 +02:00
Cole Robinson 0b15abfcbc qerror.h: Replace QERR_NOT_SUPPORTED with QERR_UNSUPPORTED
The former is only used twice, the latter is used over 30 times, and
has a nicer error message.

Cc: Luiz Capitulino <lcapitulino@redhat.com>
Cc: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2014-04-25 09:19:59 -04:00
Cole Robinson 4a66d3bf9a monitor: Remove unused monitor_print_filename
Cc: Luiz Capitulino <lcapitulino@redhat.com>
Cc: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2014-04-25 09:19:58 -04:00
Markus Armbruster c3adb58fe0 blockdev: Refuse to open encrypted image unless paused
Opening an encrypted image takes an additional step: setting the key.
Between open and the key set, the image must not be used.

We have some protection against accidental use in place: you can't
unpause a guest while we're missing keys.  You can, however, hot-plug
block devices lacking keys into a running guest just fine, or insert
media lacking keys.  In the latter case, notifying the guest of the
insert is delayed until the key is set, which may suffice to protect
at least some guests in common usage.

This patch makes the protection apply in more cases, in a rather
heavy-handed way: it doesn't let you open encrypted images unless
we're in a paused state.

It doesn't extend the protection to users other than the guest (block
jobs?).  Use of runstate_check() from block.c is disgusting.  Best I
can do right now.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-03-14 16:24:42 +01:00
Peter Maydell 01c22f2cdd main-loop: Suppress "I/O thread spun" warnings for qtest
When running under qtest we don't actually have any vcpu threads
to be starved, so the warning about the I/O thread spinning isn't
relevant, and the way qtest manipulates the simulated clock means
the warning is produced a lot as a false positive. Suppress it if
qtest_enabled(), so 'make check' output is less noisy.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
2014-03-13 21:36:50 +01:00
Stefan Weil 8ead601883 stubs: Optimize dependencies for gdbstub.c
It does not need qemu-common.h. Including exec/gdbstub.h fixes a warning
from static code analyzers and avoids mismatching declarations for
xml_builtin.

Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2014-03-02 17:13:31 +04:00
Christoffer Dall d6032e06d1 kvm: Introduce kvm_arch_irqchip_create
Introduce kvm_arch_irqchip_create an arch-specific hook in preparation
for architecture-specific use of the device control API to create IRQ
chips.

Following patches will implement the ARM irqchip create method to prefer
the device control API over the older KVM_CREATE_IRQCHIP API.

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
Message-id: 1392687720-26806-3-git-send-email-christoffer.dall@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-02-26 17:20:00 +00:00
Anthony Liguori 6c2679fc19 Merge remote-tracking branch 'kiszka/queues/slirp' into staging
# By Liu Ping Fan (3) and Jan Kiszka (1)
# Via Jan Kiszka
* kiszka/queues/slirp:
  slirp: clean up slirp_update_timeout
  slirp: set mainloop timeout with more precise value
  slirp: define timeout as macro
  slirp: make timeout local

Message-id: cover.1379415024.git.jan.kiszka@siemens.com
2013-09-17 10:01:24 -05:00
Liu Ping Fan a42e9c4188 slirp: set mainloop timeout with more precise value
If slirp needs to emulate tcp timeout, then the timeout value
for mainloop should be more precise, which is determined by
slirp's fasttimo or slowtimo. Achieve this by swap the logic
sequence of slirp_pollfds_fill and slirp_update_timeout.

Signed-off-by: Liu Ping Fan <pingfank@linux.vnet.ibm.com>
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
2013-09-17 12:26:05 +02:00
Paolo Bonzini 5accc8408f scsi: prefer UUID to VM name for the initiator name
The UUID is unique even across multiple hosts, thus it is
better than a VM name even if it is less user-friendly.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-09-12 08:46:21 +02:00
Alex Bligh 40daca54cd aio / timers: Rearrange timer.h & make legacy functions call non-legacy
Rearrange timer.h so it is in order by function type.

Make legacy functions call non-legacy functions rather than vice-versa.

Convert cpus.c to use new API.

Signed-off-by: Alex Bligh <alex@alex.org.uk>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-08-22 19:14:24 +02:00
Laszlo Ersek 56c4bfb3f0 dump: rebase from host-private RAMBlock offsets to guest-physical addresses
RAMBlock.offset                   --> GuestPhysBlock.target_start
RAMBlock.offset + RAMBlock.length --> GuestPhysBlock.target_end
RAMBlock.length                   --> GuestPhysBlock.target_end -
                                      GuestPhysBlock.target_start

"GuestPhysBlock.host_addr" is only used when writing the dump contents.

This patch enables "crash" to work with the vmcore by rebasing the vmcore
from the left side of the following diagram to the right side:

host-private
offset
relative
to ram_addr   RAMBlock                  guest-visible paddrs
            0 +-------------------+.....+-------------------+ 0
              |         ^         |     |        ^          |
              |       640 KB      |     |      640 KB       |
              |         v         |     |        v          |
  0x0000a0000 +-------------------+.....+-------------------+ 0x0000a0000
              |         ^         |     |XXXXXXXXXXXXXXXXXXX|
              |       384 KB      |     |XXXXXXXXXXXXXXXXXXX|
              |         v         |     |XXXXXXXXXXXXXXXXXXX|
  0x000100000 +-------------------+.....+-------------------+ 0x000100000
              |         ^         |     |        ^          |
              |       3583 MB     |     |      3583 MB      |
              |         v         |     |        v          |
  0x0e0000000 +-------------------+.....+-------------------+ 0x0e0000000
              |         ^         |.    |XXXXXXXXXXXXXXXXXXX|
              | above_4g_mem_size | .   |XXXX PCI hole XXXXX|
              |         v         |  .  |XXXX          XXXXX|
     ram_size +-------------------+   . |XXXX  512 MB  XXXXX|
                                   .   .|XXXXXXXXXXXXXXXXXXX|
                                    .   +-------------------+ 0x100000000
                                     .  |         ^         |
                                      . | above_4g_mem_size |
                                       .|         v         |
                                        +-------------------+ ram_size
                                                              + 512 MB

Related RHBZ: https://bugzilla.redhat.com/show_bug.cgi?id=981582

Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2013-08-08 11:01:46 -04:00
Andreas Färber 5b24c64188 cpu: Introduce CPUClass::gdb_core_xml_file for GDB_CORE_XML
Replace the GDB_CORE_XML define in gdbstub.c with a CPUClass field.
Use first_cpu for qSupported and qXfer:features:read: for now.
Add a stub for xml_builtin.

Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-07-27 00:04:17 +02:00
Kevin Wolf 5698346391 cpus: Add return value for vm_stop()
If flushing the block devices fails, return an error. The VM is stopped
anyway.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-07-15 09:51:38 +02:00
Andreas Färber c643bed99f cpu: Change qemu_init_vcpu() argument to CPUState
This allows to move the call into CPUState's realizefn.
Therefore move the stub into libqemustub.a.

Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-06-28 13:25:13 +02:00
Andreas Färber 878096eeb2 cpu: Turn cpu_dump_{state,statistics}() into CPUState hooks
Make cpustats monitor command available unconditionally.

Prepares for changing kvm_handle_internal_error() and kvm_cpu_exec()
arguments to CPUState.

Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-06-28 13:25:12 +02:00
Andreas Färber 2a78636bd2 dump: Drop qmp_dump_guest_memory() stub and build for all targets
qmp_dump_guest_memory() calls dump_init() and returns an Error when
cpu_get_dump_info() returns an error, as done by the stub.
So there is no need to have a stub for qmp_dump_guest_memory().

Enable the documentation of the always-present dump-guest-memory command.

That way we can drop CONFIG_HAVE_CORE_DUMP and leave configure
completely out of the picture for target CPU features.

Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-06-11 18:16:36 +02:00
Andreas Färber 88f62c2b1d dump: Move stubs into libqemustub.a
This allows us to drop CONFIG_NO_CORE_DUMP with its indirect dependency
on CONFIG_HAVE_CORE_DUMP.

Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-06-10 23:33:18 +02:00
Igor Mammedov 2993683b0f cpu: Introduce cpu_resume(), for single CPU
Also add a stub for it, to make possible to use it in qom/cpu.c,
which is shared with user emulators.

Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-05-01 13:04:17 +02:00
Andreas Färber c71c3e99b8 stubs: Add a vmstate_dummy struct for CONFIG_USER_ONLY
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-03-12 10:35:54 +01:00
Paolo Bonzini 1559e0d4b5 hw: move device-hotplug.o to toplevel, compile it once
The situation with device-hotplug.c is similar to qdev-monitor.c.
Add a stub for pci_drive_hot_add, so that it can be compiled once,
and move it out of hw/.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-03-01 13:57:13 +01:00
Stefan Hajnoczi 8917c3bdba slirp: switch to GPollFD
Slirp uses rfds/wfds/xfds more extensively than other QEMU components.

The rarely-used out-of-band TCP data feature is used.  That means we
need the full table of select(2) to g_poll(3) events:

  rfds -> G_IO_IN | G_IO_HUP | G_IO_ERR
  wfds -> G_IO_OUT | G_IO_ERR
  xfds -> G_IO_PRI

I came up with this table by looking at Linux fs/select.c which maps
select(2) to poll(2) internally.

Another detail to watch out for are the global variables that reference
rfds/wfds/xfds during slirp_select_poll().  sofcantrcvmore() and
sofcantsendmore() use these globals to clear fd_set bits.  When
sofcantrcvmore() is called, the wfds bit is cleared so that the write
handler will no longer be run for this iteration of the event loop.

This actually seems buggy to me since TCP connections can be half-closed
and we'd still want to handle data in half-duplex fashion.  I think the
real intention is to avoid running the read/write handler when the
socket has been fully closed.  This is indicated with the SS_NOFDREF
state bit so we now check for it before invoking the TCP write handler.
Note that UDP/ICMP code paths don't care because they are
connectionless.

Note that slirp/ has a lot of tabs and sometimes mixed tabs with spaces.
I followed the style of the surrounding code.

Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Message-id: 1361356113-11049-6-git-send-email-stefanha@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-02-21 16:17:31 -06:00
Paolo Bonzini 5708fc6655 stubs: fully replace qemu-tool.c and qemu-user.c
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-01-12 17:19:08 +01:00
Eduardo Habkost 906709a151 libqemustub: sysbus_get_default() stub
The stub will be used on cases where sysbus.c is not compiled in (e.g.
*-user).

Note that code that uses NULL as the bus with qdev{_try,}_create()
implicitly uses sysbus_get_default() as the bus, and will still require
sysbus.c to be compiled in.

Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-01-08 21:03:43 +01:00
Eduardo Habkost 083a5f8731 libqemustub: vmstate register/unregister stubs
Add vmstate stub functions, so that qdev.o can be used without savevm.o
when vmstate support is not necessary (i.e. by *-user).

Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-01-08 21:03:43 +01:00