Commit Graph

34 Commits

Author SHA1 Message Date
Igor Mammedov 5f4d917376 usb: Convert usb devices to hotplug handler API
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
2014-10-15 05:03:14 +02:00
Gonglei 594a53607e usb-bus: introduce a wrapper function to check speed
In this way, we can check speed directly, don't need
call usb_device_attach(), which has other conditions,
such as checking the chardev is open.

Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2014-09-23 12:51:08 +02:00
Gonglei bd2ba2752d usb-bus: remove "init" from USBDeviceClass struct
All usb-bus devices are realized by realize(),
remove init callback function from USBDeviceClass struct.

Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2014-09-23 12:51:08 +02:00
Gonglei 7d553f27fc usb-bus: convert USBDeviceClass init to realize
Add "realize/unrealize" in USBDeviceClass, which has errp
as a parameter. So all the implementations now use
error_setg instead of error_report for reporting error.

Note: this patch still keep "init" in USBDeviceClass, and
call kclass->init in usb_device_realize(), avoid breaking
git bisect. After realize all usb devices, will be removed.

Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2014-09-23 12:51:06 +02:00
Gonglei e5a9bece9b usb: add usb_bus_release function
add global variables releasing logic when the usb buses
were removed or hot-unpluged.

Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2014-08-29 12:51:44 +02:00
Markus Armbruster 830cd54fca usb: Fix bootindex for portnr > 9
We identify devices by their Open Firmware device paths.  The encoding
of the host controller and hub port numbers is incorrect:
usb_get_fw_dev_path() formats them in decimal, while SeaBIOS uses
hexadecimal.  When some port number > 9, SeaBIOS will miss the
bootindex (lucky case), or apply it to another device (unlucky case).

The relevant spec[*] agrees with SeaBIOS (and OVMF, for that matter).
Change %d to %x.

Bug can bite only with host controllers or hubs sporting more than ten
ports.  I'm not aware of any.

[*] Open Firmware Recommended Practice: Universal Serial Bus,
Version 1, Section 3.2.1 Device Node Address Representation
http://www.openfirmware.org/1275/bindings/usb/usb-1_0.ps

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>

Note: xhci can be configured with up to 15 ports (default is 4 ports).

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2014-08-29 12:51:43 +02:00
Michael S. Tsirkin 719ffe1f5f usb: fix up post load checks
Correct post load checks:
1. dev->setup_len == sizeof(dev->data_buf)
    seems fine, no need to fail migration
2. When state is DATA, passing index > len
   will cause memcpy with negative length,
   resulting in heap overflow

First of the issues was reported by dgilbert.

Reported-by: "Dr. David Alan Gilbert" <dgilbert@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
2014-05-14 15:24:52 +02:00
Juan Quintela 6e3d652ab2 savevm: Remove all the unneeded version_minimum_id_old (usb)
After previous Peter patch, they are redundant.  This way we don't
assign them except when needed.  Once there, there were lots of case
where the ".fields" indentation was wrong:

     .fields = (VMStateField []) {
and
     .fields =      (VMStateField []) {

Change all the combinations to:

     .fields = (VMStateField[]){

The biggest problem (appart from aesthetics) was that checkpatch complained
when we copy&pasted the code from one place to another.

Signed-off-by: Juan Quintela <quintela@redhat.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
2014-05-14 15:24:51 +02:00
Michael S. Tsirkin 9f8e9895c5 usb: sanity check setup_index+setup_len in post_load
CVE-2013-4541

s->setup_len and s->setup_index are fed into usb_packet_copy as
size/offset into s->data_buf, it's possible for invalid state to exploit
this to load arbitrary data.

setup_len and setup_index should be checked to make sure
they are not negative.

Cc: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
2014-05-05 22:15:03 +02:00
Gerd Hoffmann 5319dc7b42 usb: add support for microsoft os descriptors
This patch adds support for special usb descriptors used by microsoft
windows.  They allow more fine-grained control over driver binding and
adding entries to the registry for configuration.

As this is a guest-visible change the "msos-desc" compat property
has been added to turn this off for 1.7 + older

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2014-01-16 12:59:59 +01:00
Hans de Goede 3b444eadf7 usb: Add usb_device_alloc/free_streams
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2013-11-26 09:21:17 +01:00
Stefan Hajnoczi 02a5c4c974 qdev: Drop misleading qdev_free() function
The qdev_free() function name is misleading since all the function does
is unlink the device from its parent.  The device is not necessarily
freed.

The device will be freed when its QObject refcount reaches zero.  It is
usual for the parent (bus) to hold the final reference but there are
cases where something else holds a reference so "free" is a misleading
name.

Call object_unparent(obj) directly instead of having a qdev wrapper
function.

Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-11-05 18:06:38 +01:00
Gerd Hoffmann c60174e847 usb: sanity check setup_index+setup_len in post_load
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2013-09-10 11:14:41 +02:00
Andreas Färber fb17dfe057 qdev: Pass size to qbus_create_inplace()
To be passed to object_initialize().

Since commit 39355c3826 the argument is
void*, so drop some superfluous (BusState *) casts or direct parent
field usages.

Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-08-30 21:15:35 +02:00
Andreas Färber c889b3a55d usb: Pass size to usb_bus_new()
To be passed to qbus_create_inplace().

Use DEVICE() cast to avoid a direct parent field access.

Reviewed-by: Wenchao Xia <xiawenc@linux.vnet.ibm.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-08-30 20:14:39 +02:00
Gerd Hoffmann 71938a09d2 usb: add serial bus property
This patch adds a serial property for all usb devices, which can be
used to set the serial number of a usb device (as listed by lsusb -v)
to a specific value.  Applies to emulated devices only.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2013-06-24 08:41:07 +02:00
Gerd Hoffmann 3b7e759a41 usb: better speed mismatch error reporting
Report the supported speeds for device and port in the error message.
Also add the speeds to the tracepoint.  And while being at it drop
the redundant error message in usb_desc_attach, usb_device_attach will
report the error anyway.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2013-04-23 08:43:10 +02:00
Gerd Hoffmann c24e4aac3b usb-hub: limit chain length
USB supports up to 5 hubs chained.
Catch attempts to chain more.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2013-04-03 11:39:43 +02:00
Wenchao Xia 84f2d0ea0f HMP: add QDict to info callback handler
This patch change all info call back function to take
additional QDict * parameter, which allow those command
take parameter. Now it is set to NULL at default case.

Signed-off-by: Wenchao Xia <xiawenc@linux.vnet.ibm.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2013-01-17 10:24:52 -02:00
Andreas Färber 8c43a6f05d Make all static TypeInfos const
Since 39bffca203 (qdev: register all
types natively through QEMU Object Model), TypeInfo as used in
the common, non-iterative pattern is no longer amended with information
and should therefore be const.

Fix the documented QOM examples:

 sed -i 's/static TypeInfo/static const TypeInfo/g' include/qom/object.h

Since frequently the wrong examples are being copied by contributors of
new devices, fix all types in the tree:

 sed -i 's/^static TypeInfo/static const TypeInfo/g' */*.c
 sed -i 's/^static TypeInfo/static const TypeInfo/g' */*/*.c

This also avoids to piggy-back these changes onto real functional
changes or other refactorings.

Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-01-10 15:11:53 -06:00
Hans de Goede f79738b03b usb: Add an usb_device_ep_stopped USBDevice method
Some usb devices (host or network redirection) can benefit from knowing when
the guest stops using an endpoint. Redirection may involve submitting packets
independently from the guest (in combination with a fifo buffer between the
redirection code and the guest), to ensure that buffers of the real usb device
are timely emptied. This is done for example for isoc traffic and for interrupt
input endpoints. But when the (re)submission of packets is done by the device
code, then how does it know when to stop this?

For isoc endpoints this is handled by detecting a set interface (change alt
setting) command, which works well for isoc endpoints. But for interrupt
endpoints currently the redirection code never stops receiving data from
the device, which is less then ideal.

However the controller emulation is aware when a guest looses interest, as
then the qh for the endpoint gets unlinked (ehci, ohci, uhci) or the endpoint
is explicitly stopped (xhci). This patch adds a new ep_stopped USBDevice
method and modifies the hcd code to call this on queue unlink / ep stop.

This makes it possible for the redirection code to properly stop receiving
interrupt input (*) data when the guest no longer has interest in it.

*) And in the future also buffered bulk input.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2013-01-07 12:57:24 +01:00
Paolo Bonzini 9c17d615a6 softmmu: move include files to include/sysemu/
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2012-12-19 08:32:45 +01:00
Paolo Bonzini 83c9089e73 monitor: move include files to include/monitor/
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2012-12-19 08:31:32 +01:00
Hans de Goede 386ab487eb usb: Allow overriding of usb_desc at the device level
This allows devices to present a different set of descriptors based on
device properties.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2012-12-04 14:41:54 +01:00
Stefan Hajnoczi c128d6a6d7 usb: fail usbdevice_create() when there is no USB bus
Report an error instead of segfaulting when attaching a USB device to a
machine with no USB busses:

  $ qemu-system-arm -machine vexpress-a9 \
      -sd Fedora-17-armhfp-vexpress-mmcblk0.img \
      -kernel vmlinuz-3.4.2-3.fc17.armv7hl \
      -initrd initramfs-3.4.2-3.fc17.armv7hl.img \
      -usbdevice disk:format=raw:test.img

Note that the vexpress-a9 machine does not have a USB host controller.

Reported-by: David Abdurachmanov <David.Abdurachmanov@cern.ch>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2012-11-29 08:04:13 +01:00
Hans de Goede 9a77a0f589 usb: split packet result into actual_length + status
Since with the ehci and xhci controllers a single packet can be larger
then maxpacketsize, it is possible for the result of a single packet
to be both having transferred some data as well as the transfer to have
an error.

An example would be an input transfer from a bulk endpoint successfully
receiving 1 or more maxpacketsize packets from the device, followed
by a packet signalling halt.

While already touching all the devices and controllers handle_packet /
handle_data / handle_control code, also change the return type of
these functions to void, solely storing the status in the packet. To
make the code paths for regular versus async packet handling more
uniform.

This patch unfortunately is somewhat invasive, since makeing the qemu
usb core deal with this requires changes everywhere. This patch only
prepares the usb core for this, all the hcd / device changes are done
in such a way that there are no functional changes.

This patch has been tested with uhci and ehci hcds, together with usb-audio,
usb-hid and usb-storage devices, as well as with usb-redir redirection
with a wide variety of real devices.

Note that there is usually no need to directly set packet->actual_length
form devices handle_data callback, as that is done by usb_packet_copy()

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2012-11-08 18:41:46 +01:00
Hans de Goede 36dfe324fd usb: Add USB_RET_ADD_TO_QUEUE packet result code
This can be used by usb-device code which wishes to process an entire endpoint
queue at once, to do this the usb-device code returns USB_RET_ADD_TO_QUEUE
from its handle_data class method and defines a flush_ep_queue class method
to call when the hcd is done queuing up packets.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2012-10-25 09:08:09 +02:00
Gerd Hoffmann 495d544798 usb: restore USBDevice->attached on vmload
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2012-06-20 14:46:02 +02:00
Anthony Liguori 0d936928ef qdev: Convert busses to QEMU Object Model
This is far less interesting than it sounds.  We simply add an Object to each
BusState and then register the types appropriately.  Most of the interesting
refactoring will follow in the next patches.

Since we're changing fundamental type names (BusInfo -> BusClass), it all needs
to convert at once.  Fortunately, not a lot of code is affected.

Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
[AF: Made all new bus TypeInfos static const.]
[AF: Made qbus_free() call object_delete(), required {qom,glib}_allocated]
Signed-off-by: Andreas Färber <afaerber@suse.de>
2012-06-18 15:14:38 +02:00
Anthony Liguori 09e5ab6360 qdev: Use wrapper for qdev_get_path
This makes it easier to remove it from BusInfo.

Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
[AF: Drop now unnecessary NULL initialization in scsibus_get_dev_path()]
Signed-off-by: Andreas Färber <afaerber@suse.de>
2012-06-18 15:14:38 +02:00
Paolo Bonzini bce544740a qdev: Move bus properties to abstract superclasses
In qdev, each bus in practice identified an abstract superclass, but
this was mostly hidden.  In QOM, instead, these abstract classes are
explicit so we can move bus properties there.

All bus property walks are removed, and all device property walks
are changed to look along the class hierarchy instead.

We would have duplicates if class A defines some properties and its
subclass B does not define any, because class_b->props will be
left equal to class_a->props.

The solution here is to reintroduce the class_base_init TypeInfo
callback, that was present in one of the early QOM versions but
removed (on my request...) before committing.

This breaks global bus properties, an obscure feature when used
with the command-line which is actually useful and used when used by
backwards-compatible machine types.  So this patch also adjusts the
global bus properties in hw/pc_piix.c to refer to the abstract class.

Globals and other properties must be modified in the same patch to
avoid complications related to initialization ordering.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
2012-06-18 15:14:37 +02:00
Paolo Bonzini 3cb75a7cba qdev: Move bus properties to a separate global
Simple code movement in order to simplify future refactoring.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
2012-06-18 15:14:37 +02:00
Gerd Hoffmann eeb0cf9abf usb/vmstate: add parent dev path
... to make vmstate id string truely unique with multiple host
controllers, i.e. move from "1/usb-ptr" to "0000:00:01.3/1/usb-ptr"
(usb tabled connected to piix3 uhci).

This obviously breaks migration.  To handle this the usb bus
property "full-path" is added.  When setting this to false old
behavior is maintained.  This way current qemu will be compatible
with old versions when started using '-M pc-$oldversion'.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2012-04-17 10:23:21 +02:00
Gerd Hoffmann f1ae32a1ec usb: the big rename
Reorganize usb source files.  Create a new hw/usb/ directory and move
all usb source code to that place.  Also make filenames a bit more
descriptive.  Host adapters are prefixed with "hch-" now, usb device
emulations are prefixed with "dev-".  Fixup paths Makefile and include
paths to make it compile.  No code changes.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2012-03-13 10:15:32 +01:00