SMBIOS is just another firmware interface used by some QEMU models.
We will later introduce more firmware interfaces in this subdirectory.
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The "hw/smbios/smbios.h" include is not used, remove it.
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Many of the current virtio-*-pci device types actually represent
3 different types of devices:
* virtio 1.0 non-transitional devices
* virtio 1.0 transitional devices
* virtio 0.9 ("legacy device" in virtio 1.0 terminology)
That would be just an annoyance if it didn't break our device/bus
compatibility QMP interfaces. With these multi-purpose device
types, there's no way to tell management software that
transitional devices and legacy devices require a Conventional
PCI bus.
The multi-purpose device types would also prevent us from telling
management software what's the PCI vendor/device ID for them,
because their PCI IDs change at runtime depending on the bus
where they were plugged.
This patch adds separate device types for each of those virtio
device flavors:
- virtio-*-pci: the existing multi-purpose device types
- Configurable using `disable-legacy` and `disable-modern`
properties
- Legacy driver support is automatically enabled/disabled
depending on the bus where it is plugged
- Supports Conventional PCI and PCI Express buses
(but Conventional PCI is incompatible with
disable-legacy=off)
- Changes PCI vendor/device IDs at runtime
- virtio-*-pci-transitional: virtio-1.0 device supporting legacy drivers
- Supports Conventional PCI buses only, because
it has a PIO BAR
- virtio-*-pci-non-transitional: modern-only
- Supports both Conventional PCI and PCI Express buses
The existing TYPE_* macros for these types will point to an
abstract base type, so existing casts in the code will keep
working for all variants.
A simple test script (tests/acceptance/virtio_version.py) is
included, to check if the new device types are equivalent to
using the `disable-legacy` and `disable-modern` options.
Acked-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
- Exit boot-serial-test loop if child dies
- Sanitize verbose output in biot-tables-test
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)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=cz57
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/huth-gitlab/tags/pull-request-2018-12-17' into staging
- Replace global_qtest in some tests
- Exit boot-serial-test loop if child dies
- Sanitize verbose output in biot-tables-test
# gpg: Signature made Mon 17 Dec 2018 16:08:07 GMT
# gpg: using RSA key 2ED9D774FE702DB5
# gpg: Good signature from "Thomas Huth <th.huth@gmx.de>"
# gpg: aka "Thomas Huth <thuth@redhat.com>"
# gpg: aka "Thomas Huth <huth@tuxfamily.org>"
# gpg: aka "Thomas Huth <th.huth@posteo.de>"
# Primary key fingerprint: 27B8 8847 EEE0 2501 18F3 EAB9 2ED9 D774 FE70 2DB5
* remotes/huth-gitlab/tags/pull-request-2018-12-17:
tests/bios-tables-test: Sanitize test verbose output
tests: acpi: remove not used ACPI_READ_GENERIC_ADDRESS macro
tests: Exit boot-serial-test loop if child dies
tests/pxe: Make test independent of global_qtest
tests/prom-env: Make test independent of global_qtest
tests/machine-none: Make test independent of global_qtest
tests/test-filter: Make tests independent of global_qtest
tests/boot-serial: Get rid of global_qtest variable
tests/pvpanic: Make the pvpanic test independent of global_qtest
tests/vmgenid: Make test independent of global_qtest
tests/acpi-utils: Drop dependence on global_qtest
ivshmem-test: Drop dependence on global_qtest
tests/libqos/pci: Make PCI access functions independent of global_qtest
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
It is interesting to know whether the shutdown cause was 'quit' or
'reset', especially when using "--no-reboot". In that case, a management
layer can now determine if the guest wanted a reboot or shutdown, and
can act accordingly.
Changes the output of the reason in the iotests from 'host-qmp' to
'host-qmp-quit'. This does not break compatibility because
the field was introduced in the same version.
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
Message-Id: <20181205110131.23049-4-d.csapak@proxmox.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
[Commit message tweaked]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
This makes it possible to determine what the exact reason was for
a RESET or a SHUTDOWN. A management layer might need the specific reason
of those events to determine which cleanups or other actions it needs to do.
This patch also updates the iotests to the new expected output that includes
the reason.
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
Message-Id: <20181205110131.23049-3-d.csapak@proxmox.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
[Commit message tweaked]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Fix the extraneous extra blank lines in the test output when running with V=1.
Before:
TEST: tests/bios-tables-test... (pid=25678)
/i386/acpi/piix4:
Looking for expected file 'tests/acpi-test-data/pc/DSDT'
Using expected file 'tests/acpi-test-data/pc/DSDT'
Looking for expected file 'tests/acpi-test-data/pc/FACP'
Using expected file 'tests/acpi-test-data/pc/FACP'
Looking for expected file 'tests/acpi-test-data/pc/APIC'
Using expected file 'tests/acpi-test-data/pc/APIC'
Looking for expected file 'tests/acpi-test-data/pc/HPET'
Using expected file 'tests/acpi-test-data/pc/HPET'
OK
After:
TEST: tests/bios-tables-test... (pid=667)
/i386/acpi/piix4:
Looking for expected file 'tests/acpi-test-data/pc/DSDT'
Using expected file 'tests/acpi-test-data/pc/DSDT'
Looking for expected file 'tests/acpi-test-data/pc/FACP'
Using expected file 'tests/acpi-test-data/pc/FACP'
Looking for expected file 'tests/acpi-test-data/pc/APIC'
Using expected file 'tests/acpi-test-data/pc/APIC'
Looking for expected file 'tests/acpi-test-data/pc/HPET'
Using expected file 'tests/acpi-test-data/pc/HPET'
OK
Suggested-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
[thuth: Fixed conflicts with additional "qts" parameter]
Signed-off-by: Thomas Huth <thuth@redhat.com>
There's no point in waiting 5 full minutes when there will be
no more output. Compute timeout based on elapsed wall clock
time instead of N * delays, as the delay is a minimum sleep time.
Cc: Thomas Huth <thuth@redhat.com>
Cc: Laurent Vivier <lvivier@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
[thuth: Replaced global_qtest with local qts variable]
Signed-off-by: Thomas Huth <thuth@redhat.com>
global_qtest is not really required here, since boot_sector_test()
is already independent from that global variable.
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
global_qtest is only needed here for one readl(). Let's replace it
with qtest_readl() and we can remove the global_qtest variable here.
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Apart from using qmp() in one spot, this test does not have any
dependencies to the global_qtest variable, so we can simply get
rid of it here by replacing the qmp() with qtest_qmp().
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Apart from using qmp() in the qmp_discard_response() macro, these
tests do not have any dependencies to the global_qtest variable,
so we can simply get rid of it here by replacing the qmp() with
qtest_qmp() in the macro.
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The test does not use any of the functions that require global_qtest,
so we can simply get rid of this global variable here.
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
We want to get rid of global_qtest in the long run, thus do not
use the wrappers like inb() and outb() here anymore.
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The biggest part has already been done in the previous patch, we now
only have to replace some few qmp() and readb() calls with the
corresponding qtest_*() functions to get there.
Acked-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
As a general rule, we prefer avoiding implicit global state
because it makes code harder to safely copy and paste without
thinking about the global state. Adjust the helper code to
use explicit state instead, and update all callers.
bios-tables-test no longer depends on global_qtest, now that it
passes explicit state through the testsuite data; an assert
proves this fact (although we will get rid of it later, once
global_qtest is gone).
Signed-off-by: Eric Blake <eblake@redhat.com>
Acked-by: Igor Mammedov <imammedo@redhat.com>
Tested-by: Igor Mammedov <imammedo@redhat.com>
[thuth: adapted patch to current master branch]
Signed-off-by: Thomas Huth <thuth@redhat.com>
Managing parallel connections to two different monitors via
the implicit global_qtest makes it hard to copy-and-paste code
to tests that are not aware of the implicit state. Since we
have already fixed qpci to avoid global_qtest, we can now
simplify by not using global_qtest anywhere in ivshmem-test.
We can assert that the conversion is correct by checking that
global_qtest remains NULL throughout the test (a later patch
that changes global_qtest to not be a public global variable
will drop the assertions).
Signed-off-by: Eric Blake <eblake@redhat.com>
[thuth: Dropped the changes to test_ivshmem_hotplug() - will be fixed later]
Signed-off-by: Thomas Huth <thuth@redhat.com>
QPCIBus already tracks QTestState, so use that state instead of an
implicit reliance on global_qtest.
Based on an earlier patch ("libqos: Use explicit QTestState for pci
operations") from Eric Blake.
Signed-off-by: Thomas Huth <thuth@redhat.com>
- Return success from patch_reloc
- Preserve 32-bit values as zero-extended on x86_64
- Make bswap during memory ops as optional
- Cleanup xxhash
- Revert constant pooling for tcg/sparc/
-----BEGIN PGP SIGNATURE-----
iQEcBAABAgAGBQJcFxchAAoJEGTfOOivfiFfBUcIALmEeTTRkDtY8rCX0Thegd6g
O9roAEHvSu2BS3Zd3EwA+mu5OxcL8WeZY2LYBodFlCCsl/yQ09Lv7QmxrGtX7WNx
VF96BftTxYFGVC3Xc6+Q16/dSYM4qcWLuDxAE9BAh47m9NvTjPq+9ntEJMlalIDh
My8ANyGByBZeUeBXJuNReJcsGP5eUmNyuaM+aOlMjcVJeFAtvFacwkKpJdLPDM53
feDEiKhRWCkZq1ll4yFtuVTc+dQeYfLnPk8bkJcv7UAJnYIveXZk/eJcs5/vYjCx
8aePb9PwjbYrgXJgbo8mgVhgLBmakObQa8lJvlc3IZfIMp8OK/6au3TDXDSQAts=
=4Kdn
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/rth/tags/pull-tcg-20181216' into staging
- Remove retranslation remenents
- Return success from patch_reloc
- Preserve 32-bit values as zero-extended on x86_64
- Make bswap during memory ops as optional
- Cleanup xxhash
- Revert constant pooling for tcg/sparc/
# gpg: Signature made Mon 17 Dec 2018 03:25:21 GMT
# gpg: using RSA key 64DF38E8AF7E215F
# gpg: Good signature from "Richard Henderson <richard.henderson@linaro.org>"
# Primary key fingerprint: 7A48 1E78 868B 4DB6 A85A 05C0 64DF 38E8 AF7E 215F
* remotes/rth/tags/pull-tcg-20181216: (33 commits)
xxhash: match output against the original xxhash32
include: move exec/tb-hash-xx.h to qemu/xxhash.h
exec: introduce qemu_xxhash{2,4,5,6,7}
qht-bench: document -p flag
tcg: Drop nargs from tcg_op_insert_{before,after}
tcg/mips: Improve the add2/sub2 command to use TCG_TARGET_REG_BITS
tcg: Add TCG_TARGET_HAS_MEMORY_BSWAP
tcg/optimize: Optimize bswap
tcg: Clean up generic bswap64
tcg: Clean up generic bswap32
tcg/i386: Add setup_guest_base_seg for FreeBSD
tcg/i386: Precompute all guest_base parameters
tcg/i386: Assume 32-bit values are zero-extended
tcg/i386: Implement INDEX_op_extr{lh}_i64_i32 for 32-bit guests
tcg/i386: Propagate is64 to tcg_out_qemu_ld_slow_path
tcg/i386: Propagate is64 to tcg_out_qemu_ld_direct
tcg/s390x: Return false on failure from patch_reloc
tcg/ppc: Return false on failure from patch_reloc
tcg/arm: Return false on failure from patch_reloc
tcg/aarch64: Return false on failure from patch_reloc
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
These microbenchmarks will allow us to measure the performance impact of
FP emulation optimizations. Note that we can measure both directly the impact
on the softfloat functions (with "-t soft"), or the impact on an
emulated workload (call with "-t host" and run under qemu user-mode).
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
This gets rid of the muladd errors due to not raising the invalid flag.
- Before:
Errors found in f64_mulAdd, rounding near_even, tininess before rounding:
+000.0000000000000 +7FF.0000000000000 +7FF.FFFFFFFFFFFFF
=> +7FF.FFFFFFFFFFFFF ..... expected -7FF.FFFFFFFFFFFFF v....
[...]
- After:
In 6133248 tests, no errors found in f64_mulAdd, rounding near_even, tininess before rounding.
[...]
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Before moving them all to include/qemu/xxhash.h.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Which we forgot to do in bd224fce60 ("qht-bench: add -p flag
to precompute hash values", 2018-09-26).
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
- qcow2: Decompression worker threads
- dmg: lzfse compression support
- file-posix: Simplify delegation to worker thread
- Don't pass flags to bdrv_reopen_queue()
- iotests: make 235 work on s390 (and others)
-----BEGIN PGP SIGNATURE-----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=XKq9
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/kevin/tags/for-upstream' into staging
Block layer patches:
- qcow2: Decompression worker threads
- dmg: lzfse compression support
- file-posix: Simplify delegation to worker thread
- Don't pass flags to bdrv_reopen_queue()
- iotests: make 235 work on s390 (and others)
# gpg: Signature made Fri 14 Dec 2018 10:55:09 GMT
# gpg: using RSA key 7F09B272C88F2FD6
# gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>"
# Primary key fingerprint: DC3D EB15 9A9A F95D 3D74 56FE 7F09 B272 C88F 2FD6
* remotes/kevin/tags/for-upstream: (42 commits)
block/mirror: add missing coroutine_fn annotations
iotests: make 235 work on s390 (and others)
block: Assert that flags are up-to-date in bdrv_reopen_prepare()
block: Remove assertions from update_flags_from_options()
block: Stop passing flags to bdrv_reopen_queue_child()
block: Remove flags parameter from bdrv_reopen_queue()
block: Clean up reopen_backing_file() in block/replication.c
qemu-io: Put flag changes in the options QDict in reopen_f()
block: Drop bdrv_reopen()
block: Use bdrv_reopen_set_read_only() in the mirror driver
block: Use bdrv_reopen_set_read_only() in external_snapshot_commit()
block: Use bdrv_reopen_set_read_only() in qmp_change_backing_file()
block: Use bdrv_reopen_set_read_only() in stream_start/complete()
block: Use bdrv_reopen_set_read_only() in bdrv_commit()
block: Use bdrv_reopen_set_read_only() in commit_start/complete()
block: Use bdrv_reopen_set_read_only() in bdrv_backing_update_filename()
block: Add bdrv_reopen_set_read_only()
file-posix: Avoid aio_worker() for QEMU_AIO_IOCTL
file-posix: Switch to .bdrv_co_ioctl
file-posix: Remove paio_submit_co()
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
-----BEGIN PGP SIGNATURE-----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=bymN
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/armbru/tags/pull-qapi-2018-12-13-v2' into staging
QAPI patches for 2018-12-13
# gpg: Signature made Fri 14 Dec 2018 05:53:51 GMT
# gpg: using RSA key 3870B400EB918653
# gpg: Good signature from "Markus Armbruster <armbru@redhat.com>"
# gpg: aka "Markus Armbruster <armbru@pond.sub.org>"
# Primary key fingerprint: 354B C8B3 D7EB 2A6B 6867 4E5F 3870 B400 EB91 8653
* remotes/armbru/tags/pull-qapi-2018-12-13-v2: (32 commits)
qapi: add conditions to REPLICATION type/commands on the schema
qapi: add more conditions to SPICE
qapi: add condition to variants documentation
qapi: add 'If:' condition to struct members documentation
qapi: add 'If:' condition to enum values documentation
qapi: Add #if conditions to generated code members
qapi: add 'if' to alternate members
qapi: add 'if' to union members
qapi: Add 'if' to implicit struct members
qapi: add a dictionary form for TYPE
qapi-events: add 'if' condition to implicit event enum
qapi: add 'if' to enum members
qapi: add a dictionary form with 'name' key for enum members
qapi: improve reporting of unknown or missing keys
qapi: factor out checking for keys
tests: print enum type members more like object type members
qapi: change enum visitor and gen_enum* to take QAPISchemaMember
qapi: Do not define enumeration value explicitly
qapi: break long lines at 'data' member
qapi: rename QAPISchemaEnumType.values to .members
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The test-arm-mptimer setup creates a lot of test names using
g_strdup_printf() and never frees them. This is entirely
harmless since it's one-shot test code, but it clutters
up the output from clang's LeakSanitizer. Refactor to
use a helper function so we can free the memory.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20181204132952.2601-5-peter.maydell@linaro.org
"-machine pc" will not work all architectures. Lets fall back to the
default machine by not specifying it.
In addition we also need to specify -no-shutdown on s390 as qemu will
exit otherwise.
Cc: qemu-stable@nongnu.org
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This function takes four options (cache.direct, cache.no-flush,
read-only and auto-read-only) from a QemuOpts object and updates the
flags accordingly.
If any of those options is not set (because it was missing from the
original QDict or because it had an invalid value) then the function
aborts with a failed assertion:
$ qemu-io -c 'reopen -o read-only=foo' hd.qcow2
block.c:1126: update_flags_from_options: Assertion `qemu_opt_find(opts, BDRV_OPT_CACHE_DIRECT)' failed.
Aborted
This assertion is unnecessary, and it forces any caller of
bdrv_reopen() to pass all the aforementioned four options. This may
have made sense in order to remove ambiguity when bdrv_reopen() was
taking both flags and options, but that's not the case anymore.
It's also unnecessary if we want to validate the option values,
because bdrv_reopen_prepare() already takes care of that, as we can
see if we remove the assertions:
$ qemu-io -c 'reopen -o read-only=foo' hd.qcow2
Parameter 'read-only' expects 'on' or 'off'
Signed-off-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
When reopen_f() puts a block device in the reopen queue, some of the
new options are passed using a QDict, but others ("read-only" and the
cache options) are passed as flags.
This patch puts those flags in the QDict. This way the flags parameter
becomes redundant and we'll be able to get rid of it in a subsequent
patch.
Signed-off-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Use a common function to generate the "If:..." line.
While at it, get rid of the existing \n\n (no idea why it was
there). Use a line-break in member description, this seems to look
slightly better in the plaintext version.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20181213123724.4866-19-marcandre.lureau@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
The generated code is for now *unconditional*. Later patches generate
the conditionals.
Note that union discriminators may not have 'if' conditionals.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20181213123724.4866-14-marcandre.lureau@redhat.com>
Message-Id: <20181213123724.4866-15-marcandre.lureau@redhat.com>
[Patches squashed, commit message tweaked]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Wherever a struct/union/alternate/command/event member with NAME: TYPE
form is accepted, desugar it to a NAME: { 'type': TYPE } form.
This will allow to add new member details, such as 'if' in the
following patch to introduce conditionals, or 'default' for default
values etc.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20181213123724.4866-13-marcandre.lureau@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
QAPISchemaMember gains .ifcond for enum members: inherited classes,
such as QAPISchemaObjectTypeMember, will thus have an ifcond member
after this (those different types will also use the .ifcond to store
the condition and generate conditional code in the following patches).
The generated code remains unconditional for now. Later patches
generate the conditionals.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20181213123724.4866-10-marcandre.lureau@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Desugar the enum NAME form to { 'name': NAME }. This will allow to add
new enum members, such as 'if' in the following patch.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20181213123724.4866-7-marcandre.lureau@redhat.com>
Message-Id: <20181213123724.4866-8-marcandre.lureau@redhat.com>
Message-Id: <20181213123724.4866-9-marcandre.lureau@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
[Harmless accidental move backed out, long line wrapped, patches
squashed]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Report the set of missing or unknown keys. And give a hint about the
accepted keys.
The error message for multiple meta type members (visible in
tests/qapi-schema/double-type.err) is not improved.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20181213123724.4866-6-marcandre.lureau@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Commit 93bda4dd46 changed the internal representation of enum type
members from str to QAPISchemaMember, but we still print only a
string. Has been good enough, as the name is the member's only
attribute of interest, but that's about to change. To prepare, print
them more like object type members.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20181213123724.4866-4-marcandre.lureau@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
This will allow to add and access more properties associated with enum
values/members, like the associated 'if' condition. We may want to
have a specialized type QAPISchemaEnumMember, for now this will do.
Modify gen_enum() and gen_enum_lookup() for the same reason.
Suggested-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20181213123724.4866-3-marcandre.lureau@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Let's make sure that the range handling code can properly deal with
ranges that end at the biggest possible number.
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20181121164421.20780-10-david@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
