This commit adds support for printing the content of the target_siginfo_t
structure in a similar way to how it is printed by the host strace. The
pointer to this structure is sent as the last argument of the
rt_sigqueueinfo() and rt_tgsigqueueinfo() system calls.
For this purpose, print_siginfo() is used and the get_target_siginfo()
function is implemented in order to get the information obtained from
the pointer into the form that print_siginfo() expects.
The get_target_siginfo() function is based on
host_to_target_siginfo_noswap() in linux-user mode, but here both
arguments are pointers to target_siginfo_t, so instead of converting
the information to siginfo_t it just extracts and copies it to a
target_siginfo_t structure.
Prior to this commit, typical strace output used to look like this:
8307 rt_sigqueueinfo(8307,50,0x00000040007ff6b0) = 0
After this commit, it looks like this:
8307 rt_sigqueueinfo(8307,50,{si_signo=50, si_code=SI_QUEUE, si_pid=8307,
si_uid=1000, si_sigval=17716762128}) = 0
Signed-off-by: Miloš Stojanović <Milos.Stojanovic@rt-rk.com>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
This patch improves the consistentcy of the output from print_siginfo()
by removing spaces around the equal sign of si_pid, si_uid, si_timer1,
si_timer2, si_band, si_fd, si_addr, si_status and si_sigval. This way
they match si_signo and ci_code. Host strace was used as a reference
for this chage.
Prior to this commit, typical strace output used to look like this:
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
This commit improves strace support for syscall rt_tgsigqueueinfo().
Prior to this commit, typical strace output used to look like this:
7775 rt_tgsigqueueinfo(7775,7775,50,1996483164,0,0) = 0
After this commit, it looks like this:
7775 rt_tgsigqueueinfo(7775,7775,50,0x76ffea5c) = 0
Signed-off-by: Miloš Stojanović <Milos.Stojanovic@rt-rk.com>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Add a new system call: rt_tgsigqueueinfo().
This system call is similar to rt_sigqueueinfo(), but instead of
sending the signal and data to the whole thread group with the ID
equal to the argument tgid, it sends it to a single thread within
that thread group. The ID of the thread is specified by the tid
argument.
The implementation is based on the rt_sigqueueinfo() in linux-user
mode, where the tid is added as the second argument and the
previous second and third argument become arguments three and four,
respectively.
Signed-off-by: Miloš Stojanović <Milos.Stojanovic@rt-rk.com>
Conflicts:
linux-user/syscall.c
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Change the type of the first argument of rt_sigqueinfo() from int to pid_t
in the syscall declaration to match specifications of the system call.
Proper spacing is added to satisfy checkpatch.pl.
Signed-off-by: Miloš Stojanović <Milos.Stojanovic@rt-rk.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Change the unlock_user() argument from arg1 to arg3 to match with
lock_user(), since arg3 contains the pointer to the siginfo_t structure.
Signed-off-by: Miloš Stojanović <Milos.Stojanovic@rt-rk.com>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Fix the ssetmask() system call by removing the invocation of sigorset().
The ssetmask() system call should replace the old signal mask
with the new and return the old mask. It shouldn't combine
the old and the new mask with sigorset(). Fetching the old
mask for sigorset() is also no longer needed.
The problem was detected after running LTP test group syscalls
for the MIPS EL 32 R2 architecture where the test ssetmask01 failed
with exit code 1. The test passes now that the ssetmask() system call
is fixed.
Signed-off-by: Miloš Stojanović <Milos.Stojanovic@rt-rk.com>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Improve strace support for syscall tkill(), tgkill() and rt_sigqueueinfo()
by implementing print functions that match arguments types of the system
calls and add them to the corresponding starce.list entry.
tkill:
Prior to this commit, typical strace output used to look like this:
4886 tkill(4886,50,0,4832615904,0,-9151031864016699136) = 0
After this commit, it looks like this:
4886 tkill(4886,50) = 0
tgkill:
Prior to this commit, typical strace output used to look like this:
4890 tgkill(4890,4890,50,8,4832630528,4832615904) = 0
After this commit, it looks like this:
4890 tgkill(4890,4890,50) = 0
rt_sigqueueinfo:
Prior to this commit, typical strace output used to look like this:
8307 rt_sigqueueinfo(8307,50,1996483164,0,0,50) = 0
After this commit, it looks like this:
8307 rt_sigqueueinfo(8307,50,0x00000040007ff6b0) = 0
Signed-off-by: Miloš Stojanović <Milos.Stojanovic@rt-rk.com>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Improve strace support for syscalls getuid(), gettid(), getppid()
and geteuid(). Since these system calls don't have arguments, "%s()"
is added in the corresponding strace.list entry so that no arguments
are printed.
getuid:
Prior to this commit, typical strace output used to look like this:
4894 getuid(4894,0,0,274886293296,-3689348814741910323,4832615904) = 1000
After this commit, it looks like this:
4894 getuid() = 1000
gettid:
Prior to this commit, typical strace output used to look like this:
8307 gettid(0,0,64,0,4832630528,4832615840) = 8307
After this commit, it looks like this:
8307 gettid() = 8307
getppid:
Prior to this commit, typical strace output used to look like this:
20588 getppid(20588,64,0,4832630528,4832615888,0) = 20625
After this commit, it looks like this:
20588 getppid() = 20625
geteuid:
Prior to this commit, typical strace output used to look like this:
20588 geteuid(64,0,0,4832615888,0,-9151031864016699136) = 1000
After this commit, it looks like this:
20588 geteuid() = 1000
Signed-off-by: Miloš Stojanović <Milos.Stojanovic@rt-rk.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Instead of post-processing the real contents use the remembered target
argv. That removes all traces of qemu, including command line options,
and handles QEMU_ARGV0.
Signed-off-by: Andreas Schwab <schwab@suse.de>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Arguments passed to execve(2) call from user program could
be large, allocating stack memory for them via alloca(3) call
would lead to bad behaviour. Use 'g_new0' to allocate memory
for such arguments.
Reported-by: Jann Horn <jannh@google.com>
Signed-off-by: Prasad J Pandit <pjp@fedoraproject.org>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
When a fd is opened using inotify_init(), a read provides
one or more inotify_event structures:
struct inotify_event {
int wd;
uint32_t mask;
uint32_t cookie;
uint32_t len;
char name[];
};
The integer fields must be byte-swapped to the target endianness.
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
When a fd is opened using eventfd(), a read provides
a 64bit counter in the host byte order, and a
write increase the internal counter by the provided
64bit value.
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
As for sendmsg() or sendto(), we must call the target to
host data translator if it is defined. This is needed for
eventfd(): the write() syscall allows to add a value to
the internal counter, and so, it must be byte-swapped to
the host order.
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Change malloc/strdup/free to g_malloc/g_strdup/g_free in
util/envlist.c.
Remove NULL checks for pointers returned from g_malloc and g_strdup
as they exit in case of failure. Also, update calls to envlist_create
to reflect this.
Free array and array contents returned by envlist_to_environ using
g_free in bsd-user/main.c and linux-user/main.c.
Update comments to reflect change in semantics.
Signed-off-by: Saurav Sachidanand <sauravsachidanand@gmail.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Shadow registers are part of the openrisc spec along with sr[cid], as
part of the fast context switching feature. When exceptions occur,
instead of having to save registers to the stack if enabled the CID will
increment and a new set of registers will be available.
This patch only implements shadow registers which can be used as extra
scratch registers via the mfspr and mtspr if required. This is
implemented in a way where it would be easy to add on the fast context
switching, currently cid is hardcoded to 0.
This is need for openrisc linux smp kernels to boot correctly.
Signed-off-by: Stafford Horne <shorne@gmail.com>
* raspi2: implement RNG module
* raspi2: implement new SD card controller (but don't wire it up)
* sdhci: bugfixes for block transfers
* virt: fix cpu object reference leak
* Add missing fp_access_check() to aarch64 crypto instructions
* cputlb: Don't assume do_unassigned_access() never returns
* virt: Add a user option to disallow ITS instantiation
* i.MX timers: fix reset handling
* ARMv7M NVIC: rewrite to fix broken priority handling and masking
* exynos: Fix proper mapping of CPUs by providing real cluster ID
* exynos: Fix Linux kernel division by zero for PLLs
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=3qLp
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/pmaydell/tags/pull-target-arm-20170228' into staging
target-arm queue:
* raspi2: implement RNG module
* raspi2: implement new SD card controller (but don't wire it up)
* sdhci: bugfixes for block transfers
* virt: fix cpu object reference leak
* Add missing fp_access_check() to aarch64 crypto instructions
* cputlb: Don't assume do_unassigned_access() never returns
* virt: Add a user option to disallow ITS instantiation
* i.MX timers: fix reset handling
* ARMv7M NVIC: rewrite to fix broken priority handling and masking
* exynos: Fix proper mapping of CPUs by providing real cluster ID
* exynos: Fix Linux kernel division by zero for PLLs
# gpg: Signature made Tue 28 Feb 2017 12:40:51 GMT
# gpg: using RSA key 0x3C2525ED14360CDE
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>"
# gpg: aka "Peter Maydell <pmaydell@gmail.com>"
# gpg: aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>"
# Primary key fingerprint: E1A5 C593 CD41 9DE2 8E83 15CF 3C25 25ED 1436 0CDE
* remotes/pmaydell/tags/pull-target-arm-20170228: (27 commits)
hw/arm/exynos: Fix proper mapping of CPUs by providing real cluster ID
hw/arm/exynos: Fix Linux kernel division by zero for PLLs
bcm2835_sdhost: add bcm2835 sdhost controller
armv7m: Allow SHCSR writes to change pending and active bits
armv7m: Raise correct kind of UsageFault for attempts to execute ARM code
armv7m: Check exception return consistency
armv7m: Extract "exception taken" code into functions
armv7m: VECTCLRACTIVE and VECTRESET are UNPREDICTABLE
armv7m: Simpler and faster exception start
armv7m: Remove unused armv7m_nvic_acknowledge_irq() return value
armv7m: Escalate exceptions to HardFault if necessary
arm: gic: Remove references to NVIC
armv7m: Fix condition check for taking exceptions
armv7m: Rewrite NVIC to not use any GIC code
armv7m: Implement reading and writing of PRIGROUP
armv7m: Rename nvic_state to NVICState
ARM i.MX timers: fix reset handling
hw/arm/virt: Add a user option to disallow ITS instantiation
cputlb: Don't assume do_unassigned_access() never returns
Add missing fp_access_check() to aarch64 crypto instructions
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
M profile doesn't implement ARM, and the architecturally required
behaviour for attempts to execute with the Thumb bit clear is to
generate a UsageFault with the CFSR INVSTATE bit set. We were
incorrectly implementing this as generating an UNDEFINSTR UsageFault;
fix this.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
The current implementation of the mincore(2) syscall sets errno to
EFAULT when the region identified by the first two parameters is
invalid.
This goes against the man page specification, where mincore(2) should
only fail with EFAULT when the third parameter is an invalid address;
and fail with ENOMEM when the checked region does not point to mapped
memory.
Signed-off-by: Franklin "Snaipe" Mathieu <snaipe@diacritic.io>
Cc: Riku Voipio <riku.voipio@linaro.org>
Cc: Aurelien Jarno <aurelien@aurel32.net>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20170217085800.28873-2-snaipe@diacritic.io>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
do_rt_sigreturn uses an uninitialised local variable instead of fetching
the old signal mask directly from the signal frame when restoring the mask,
so the signal mask is undefined after do_rt_sigreturn. As the signal
frame data is in target-endian order, target_to_host_sigset instead of
target_to_host_sigset_internal is required.
do_sigreturn is correct in using target_to_host_sigset_internal, because
get_user already did the endianness conversion.
Signed-off-by: Michael Karcher <karcher@physik.fu-berlin.de>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20170225110517.2832-3-laurent@vivier.eu>
Use cpu_m68k_get_ccr()/cpu_m68k_set_ccr() to setup and restore correctly
the value of SR in the ucontext structure
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20170225110517.2832-2-laurent@vivier.eu>
Note that x86_64 has only _rt signal handlers. This implementation
attempts to share code with the x86_32 implementation.
CC: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Allan Wirth <awirth@akamai.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Pranith Kumar <bobby.prani@gmail.com>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20170226165345.8757-1-bobby.prani@gmail.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Since commit 5ea2fc8 ("linux-user: Sanity check clone flags"),
trying to run fork() fails with old distro on some architectures.
This is the case with HP-PA and Debian 5 (Lenny).
It fails on:
if ((flags & CSIGNAL) != TARGET_SIGCHLD) {
return -TARGET_EINVAL;
}
because flags is 17, whereas on HP-PA, SIGCHLD is 18.
17 is the SIGCHLD value of my host (x86_64).
It appears that for TARGET_NR_fork and TARGET_NR_vfork, QEMU calls
do_fork() with SIGCHLD instead of TARGET_SIGCHLD.
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20170216173707.16209-1-laurent@vivier.eu>
Programs run under qemu-ppc64 on an x86_64 host currently segfault
if they use pthread_create() due to the adjustment made to the NIP in
commit bd6fefe71c.
This patch changes cpu_loop() to set the NIP back to the
pre-incremented value before calling do_syscall(), which causes the
correct address to be used for the new thread and corrects the fault.
Signed-off-by: Sam Bobroff <sam.bobroff@au1.ibm.com>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Coverity doesn't like the code in load_symbols() which assumes
it can use 'int' for a variable that might hold an offset into
the guest ELF file, because in a 64-bit guest that could
overflow. Guest binaries with 2GB sections aren't very likely
and this isn't a security issue because we fully trust the
guest linux-user binary anyway, but we might as well use the
right types, which will placate Coverity. Use uint64_t to
hold section sizes, and bail out if the symbol table is too
large rather than just overflowing an int.
(Coverity issue CID1005776)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <1486249533-5260-1-git-send-email-peter.maydell@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
A segfault is noticed when an emulated program uses any of ucontext
regs fields. Risu detected this issue in the following operation when
handling a signal:
ucontext_t *uc = (ucontext_t*)uc;
uc->uc_mcontext.regs->nip += 4;
but this works fine:
uc->uc_mcontext.gp_regs[PT_NIP] += 4;
This patch set regs to a valid location as well as other sigcontext
fields.
Signed-off-by: Jose Ricardo Ziviani <joserz@linux.vnet.ibm.com>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <1485900317-3256-1-git-send-email-joserz@linux.vnet.ibm.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
tests/tcg/mmap test fails with values other than default target page
size. When creating a map beyond EOF, extra anonymous pages are added up
to the target page boundary. Currently, this operation is performed only
when qemu_real_host_page_size < TARGET_PAGE_SIZE, but it should be
performed if the configured page size (qemu -p) is larger than
qemu_real_host_page_size too.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
[pranith: dropped checkpatch changes]
Signed-off-by: Pranith Kumar <bobby.prani@gmail.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20170119151533.29328-2-bobby.prani@gmail.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Add QEMU_IFLA_GSO_MAX_SEGS and QEMU_IFLA_GSO_MAX_SIZE
in host_to_target_data_link_rtattr().
These two messages are sent by the host kernel when
we use "sudo".
Found with qemu-m68k and Debian etch-m68k (sudo 1.6.8p12-4) and
host kernel 4.7.6-200.fc24.x86_64
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <1477530049-15676-1-git-send-email-laurent@vivier.eu>
If fourth argument is NULL it should be passed without
using lock_user function which would, in that case, return
EFAULT, and system call supports passing NULL as fourth argument.
Signed-off-by: Lena Djokic <Lena.Djokic@rt-rk.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Calculation of 64-bit offset was not correct for all cases.
Signed-off-by: Lena Djokic <Lena.Djokic@rt-rk.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
This commit adds necessary conversion of argument passed to inotify_init1.
inotify_init1 flags can be IN_NONBLOCK and IN_CLOEXEC which rely on O_NONBLOCK
and O_CLOEXEC and those can have different values on different platforms.
Signed-off-by: Lena Djokic <Lena.Djokic@rt-rk.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
The LT instruction was added in the extended immediate facility
introduced with the z9-109 processor.
Cc: Riku Voipio <riku.voipio@iki.fi>
Reported-by: Michael Tokarev <mjt@tls.msk.ru>
Fixes: c9bc3437a9
Suggested-by: Aurelien Jarno <aurelien@aurel32.net>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
This avoids having to keep merging and extracting the flag from SR.
Reviewed-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Threads work much better when you set the TLS register.
This was fixed in the upstream kernel for Linux 4.9.
Signed-off-by: Richard Henderson <rth@twiddle.net>
We need to handle EXCP_DEBUG and EXCP_INTERRUPT.
We need to send signals to the guest using queue_signal.
Signed-off-by: Richard Henderson <rth@twiddle.net>
the correct UTS machine name (as expected by systemd) is "parisc",
not "hppa".
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20170126080449.28255-4-laurent@vivier.eu>
Signed-off-by: Richard Henderson <rth@twiddle.net>
apt-get was hanging on linux-user hppa.
strace has shown the netlink data stream was not correctly byte swapped.
It appears the fd translator function is unregistered just after it
has been registered, so the translator function is not called.
This patch removes the fd_trans_unregister() after the do_socket()
in the TARGET_NR_socket case.
This fd_trans_unregister() was added by commit
e36800c linux-user: add signalfd/signalfd4 syscalls
when do_socket() was not registering any fd translator.
And as now it is, we must remove this fd_trans_unregister() to keep them.
Reported-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Tested-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Message-Id: <20170126080449.28255-3-laurent@vivier.eu>
Signed-off-by: Richard Henderson <rth@twiddle.net>
"any" does not exist, therefore resulting in a misleading error message.
Reported-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20170130145025.26475-1-david@redhat.com>
Reviewed-by: Stefan Weil <sw@weilnetz.de>
Reviewed-by: Alexander Graf <agraf@suse.de>
Cc: qemu-stable@nongnu.org
For v7M attempts to access a nonexistent coprocessor are reported
differently from plain undefined instructions (as UsageFaults of type
NOCP rather than type UNDEFINSTR). Split them out into a new
EXCP_NOCP so we can report the FSR value correctly.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 1485285380-10565-8-git-send-email-peter.maydell@linaro.org
Add missing bits for qemu-user required for emulating Altera Nios2
userspace binaries.
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Chris Wulff <crwulff@gmail.com>
Cc: Jeff Da Silva <jdasilva@altera.com>
Cc: Ley Foon Tan <lftan@altera.com>
Cc: Sandra Loosemore <sandra@codesourcery.com>
Cc: Yves Vandervennet <yvanderv@altera.com>
Reviewed-by: Alexander Graf <agraf@suse.de>
Message-Id: <20170118220146.489-4-marex@denx.de>
Signed-off-by: Richard Henderson <rth@twiddle.net>
